RMA process using RAS, no IRRE created

Hi,
I try to implement the RMA process using document RAS. So far, I can create the RAS order and I also see the "Returns" marked on IRRS item level, but when I return, no subitem for returns is created.
Can you please help.
Thank you!
Florian

Hi,
Check the following settings with respect to your Item category and requirement class etc...
1 ) SPRO>Sales and Distribution>Basic Functions>Availability Check and Transfer of Requirements>Transfer of Requirements-->Define Requirements Classes --> Determination Of Requirement Types Using Transaction
Actual Assignment:
Item Category                                    Reqt class                           Reqt. Type
IRRS                                                      039                                         SE
IRRE                                                      040                                         KE
IRRP                                                      204                                         SERP
IRAL                                                       040                                         KE
Sales and Distribution>Sales>Sales Document Item-->Assign Item Categories for determining the item category based on usage
Actual Assignment:
Sal. Doc. Type    Item Cat. Group Item Usage H. L . Item Cat Item Category
RAS                        NORM                                                                                IRRS
RAS                        NORM                   R101                      IRRS                      IRRE
RAS                        NORM                   R102                      IRRS                      IRRP
RAS                        NORM                   R103                      IRRS                      IRAL
Regards

Similar Messages

Vendor create process using workflow

hello,
I have been assigned a project to desgin a process to automatically create a vendor. below is what I think has to be done. can this be reviewed to see if this is the correct approch and if not, suggest a better approach.
1) the vendor will sign onto our portal and submit their information to have them created as a vendor in our system. this information will be stored in a custom table
2) the portal process will have a ABAP program that generates the screen for the user to enter thier data. this program will also start a workflow that will send a notification to a person inside our company for them to review the information and decide weather the vendor can be added.
3) if the person approves the request, the workflow will submit a process to create the vendor, and send a approval email to the vendor
4) If the person rejects the process, the workflow will send an rejecction email will be sent to the vendor
I am in charge of creating the workflow and submitting the vendor create process
thanks in advance for the help

Hi Anil
Take a look at the Workflow collateral located on http://otn.oracle.com/products/integration/content.html.
I'd also suggest looking at the Sample Workflow Processes included with Oracle Workflow.
There are also some on demand Oracle iLearning courses (ilearning.oracle.com) which should be very useful for you.
Cheers
Mark
Hi,
Could anyone give me a case study describing how to create a new process using workflow builder? Where are the notifications saved in the database? Where is the process saved? Give me a general flow of events in the creation of, say a document management process wherein all these details are specified. A document containing the whole flow involved in the creation of a process using workflow builder. What all PL/SQL procedures I need to write and all. I have both workflow server and builder installed.
This would be of immense help.
Regards
Anil

Err in creating Activit under tab Ext. Process using BAPI_NETWORK_MAINTAIN

Hi Gurus,
I need to create activity under tab Ext. Processing for a network and i am planning to use BAPI "BAPI_NETWORK_MAINTAIN" for this purpose. I am able to create activity under "Int. Processing" using this BAPI but got error for "Ext. Processing" tab.
Below is the code i am doing for ext. processing tab.
****to move 3rd activity number for external processing
itemsg-internal_object_id = '000004000873'.
activity = '0030'.
CONCATENATE itemsg-internal_object_id activity INTO v_str.
      MOVE itemsg-internal_object_id+0(12) TO itactivity-network.
    MOVE '0030' TO itactivity-activity.
    MOVE 'Activity2' TO itactivity-description.
    MOVE 'PS02' TO itactivity-control_key.
    MOVE '5001-KOS-0061' TO itactivity-project_definition.
    MOVE '5001-KOS-0061-BA' TO itactivity-wbs_element.
   MOVE 'AA' TO itactivity-factory_calendar.
   move '2000' to itactivity-DURATION_NORMAL.
   MOVE 'DAY' to itactivity-DURATION_NORMAL_UNIT.
   MOVE '2000' to itactivity-WORK_ACTIVITY.
   MOVE 'Z0004' to itactivity-MILESTONE.
   MOVE 'M3'    to itactivity-UN_WORK.
    MOVE '099' to itactivity-MATL_GROUP.
    MOVE 'PGL' to itactivity-PUR_GROUP.
    APPEND itactivity.
    MOVE '000003' TO itnetmethod-refnumber.
    MOVE 'NETWORKACTIVITY' TO itnetmethod-objecttype.
    MOVE 'CREATE' TO itnetmethod-method.
    MOVE v_str TO itnetmethod-objectkey.
    APPEND itnetmethod.
    CLEAR itnetmethod.
Below is the error message i got when i load this code.
Enter a time unit, since you have entered either work or actual work
Termination: Too many errors (more than 10% of methods)
The order or network could not be saved
Please help me to resolve this issue.
Thanks in advance
Ajay

Hi,
1)
I would suggest declaring a structure of type BAPE_VBAP & BAPE_VBEP...Then move the values instead of using offset..
Example
DATA: S_BAPE_VBAP TYPE BAPE_VBAP.
Populate the Extension structure WITH Order commited flag
LW_EXT_STRUCTURE-STRUCTURE = C_BAPE_VBAP.
S_BAPE_VBAP-VBELN = W_VBAP-VBELN.
S_BAPE_VBAP-POSNR = W_VBAP-POSNR.
S_BAPE_VBAP-ZZORDCOFL = W_VBAP-ZZ_ORDCOFL.
LW_EXT_STRUCTURE-VALUEPART1 = S_BAPE_VBAP.
This will make sure the BAPE_VBAP is extended with the Z fields..
2)
You are checking only for abort messages...You are not checking for error messages..
Instead of this..
READ TO CHECK THE ERROR AND ABORT MESSAGES DURING BAPI CALL
READ TABLE LT_RETURN_TAB INTO LW_RETURN_TAB
WITH KEY TYPE = C_MSGTYP_A
BINARY SEARCH.
Have this code..
LOOP AT LT_RETURN_TAB WHERE TYPE = 'E' OR TYPE = 'A'.
EXIT.
ENDLOOP.
IF SY-SUBRC = 0.
WRITE: / 'ERROR'.
ELSE.
WRITE: / 'SUCCESS'.
ENDIF.
This will make sure there are no error messages..Also check the return table for error messages in the debugging mode..
Thanks,
Naren

Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process

Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process
thank you

Yes you can.
Alternatively, you can email [email protected]

How to create cross tab reports using RAS SDK api with Crystal Reports XI

Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.

Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on.....

Approach to create a generic Approval process using SOA human workflow ?

Hello Experts,
I'm looking to create a generic approval process using oracle soa human workflow component using JDev 11.1.1.5
Have about 7-8 existing applications which do some kind of 'approval' . So need to create a generic solution for all 7-8 applications, instead of users logging into 7-8 different applications to approve by logging into different systems. Just want to have like a 'one stop shop' , where i can just go and approve for any application without having to log into separate applications.
I'm looking to get some suggestions and ideas, on how I can achieve this functionality ... Any suggestions/ideas are appreciated .
Thanks a lot.

Hello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

How to create RMA lines using OE_ORDER_PUB API

Hi All,
We are trying to create RMA lines using OE_ORDER_PUB API but every time API creating Standard Order Line line type in application.
My program is creating order header as a Return Order, i am passing corrent line type ids (1028 - RMA Shipment, 1027 - RMA Receipt) but oracle API is creating Standard Order Lines (ID 1001).
Can any one tell me about that?
Thanks
Ravi
null

Check the defaulting rules setup. Defaulting rule will derive the line type based on the order type and shippable flag etc.
Also check the line flows assigned to the order type in transaction types window.
Thanks / Bhaskar Akkala

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

Invoking deployed bpel process using WLST

Hi All,
Am new to WLST. So please tolerate with me if i am asking the obvious
I read through the forums and have successfully deployed a BPEL process using WLST as given below
ant -f ant-sca-deploy.xml -DserverURL=http://localhost:8001 -DsarLocation=C:\oracle\Middleware\PS3\Oracle_SOA1\bin\sca_esd9_jca_bpel1.1_ccgd_trn_ob_rev1.jar -Doverwrite=true -Duser=weblogic -Dpassword=welcome1 -DforceDefault=true
And i have also tried un deploying and it works fine.
But, the problem is, i want to invoke the deployed BPEL process either by accessing the WSDL URL (http://localhost:8001/soa-infra/services/default/esd9_jca_bpel1.1_ccgd_trn_ob/bpelprocess1_client_ep?WSDL) or by any other means using WLST. I have to send an input to this deployed process.
I have googled it and have found ways to invoke a web service using JAVA or VBS. But is it possible to do it through WLST?
Thanks in advance.

Sancho,
Thanks for the prompt reply. We trying to automate the following process:-
1. The user select multiple documents from a folder in a library that contains all released documents.
2. He then locks the documents.
3. Selects the locked documents and copies it to a folder in the personal library.
We are trying to lock and copy the documents as a 1 step process, because its difficult for the users to select all of the documents locked earlier and then copy it the personal library.
We are trying to take the folder name as the user parameter, when the files are locked, so that the process and create the lock the files, create the folder and copy the files in this folder.
Thanks again for your time and help.
Hetal

How to Upload a File in Bpel Process using JSP

I am trying to upload file in bpel process using front end as a Jsp.
i create the jsp page and i am able to pass the value from jsp to bpel process.
In bpel process i don't know how to pass or assign the specified file name into file adapter for reading the files.
Please help me...
Saravanan

You don't assign the url of the file to it.
To either get the data from the file into the bpel process you could use the url-parameter together with the ora:readFile function....or you could let your web-application upload the file to some location on the server...and on this location you could use the file-adapter together with the polling, to start your bpel process.

Unable to use RAS SDK for server-side printing for XI 3.1

Hi all,
I am using RAS SDK for server-side printing. Here are my codes:
ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise");
IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
//out.println("Current User is = " + enterpriseSession.getUserInfo().getUserName());
//out.println (" ");
IInfoObjects infoObjects = iStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_Kind='CrystalReport' AND SI_NAME = 'Sales Print'");
IInfoObject infoObject = (IInfoObject)infoObjects.get(0);
IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
ReportClientDocument rcd = new ReportClientDocument();
rcd = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
//Create print options to use when printing.
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("
cdi5boe
HPLaserJ");
printOptions.setJobTitle("Test Printer Job");
printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
printOptions.setPaperSource(PaperSource.auto);
printOptions.setPaperSize(PaperSize.paperLetter);
printOptions.setNumberOfCopies(1);
printOptions.setCollated(false);
PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
printOptions.addPrinterPageRange(printPageRange);
//Print report.
rcd.getPrintOutputController().printReport(printOptions);
When I run the report, I got the following errors:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: com.businessobjects.crystalreports.printer.bean.ReportPrinter---- Error code:-2147215357 Error code name:internal
I consult the Diamond Technical Community and I found the issue related to printer name:
https://boc.sdn.sap.com/node/498
However, I did check the printer name, it is accessible via Windows Explorer.
Anyone knows how to resolve this?
Regards,
Derek

It doesn't appear to be listed as a dependency in the developer docs, but would you try putting the ReportPrinter.jar in your RAS app?
Sincerely,
Ted Ueda

How to use ora:processXSLT to create HTML with BR tags included?

I am using a .xsl to create HTML for use as part of a notification process. The issue is that if in the .xsl I include the
tag, when the transform engine runs to make the HTML it creates tags with out the maching tags. (in doing some reading this seems to be a feature of most XSLT engines) But the result is invalid XML, so when I attempt to assign the output to a variable the process faults and I get the following error:
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:processXSLT("XML_PURCHASE_ORDER_to_HTML.xsl", bpws:getVariableData("inputVariable", "payload", "/ns1:XML_PURCHASE_ORDER"))", the reason is The XML data is invalid.
The XML data is invalid; the reason is "Error on line 100 of document : The element type "br" must be terminated by the matching end-tag "
". Nested exception: The element type "br" must be terminated by the matching end-tag "
Message was edited by:
mlutze
Message was edited by:
mlutze
Message was edited by:
mlutze

You can probably set the output format in the stylesheet, like:
<xsl:output method="txt" indent="no" omit-xml-declaration="yes" />
if you really don't want to use xhtml. The result might have to be wraped in a cdata block in the bpel flow?
cheers
/Stig

Using Flash Catalyst to create a portfolio gallery... Problems

I'm using Fc to create a portfolio site, yet have been struggling with creating a gallery that shows the way I want it to. I've tried to streamline the process using states and substates, as several people have suggested to others, yet I'm having a difficult time figuring out exactly how to transition to these states without having the content from another state show, or really finding the best method to achieve the desired result. Given that I'm pretty new to Catalyst, a detailed solution would be very appreciated!
edit... Also, I do not wish to use a data list, because I don't want even rows and columns for each set of photos.
Message was edited by: Chip Davis

Here is a tutorial that I wrote on extending Flash Catalyst to use keyboard navigation:
http://chrisgriffith.wordpress.com/2011/11/13/adding-keyboard-navigation-to-a-flash-cataly st-project/
Chris

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

RMA process using RAS, no IRRE created

Similar Messages

Maybe you are looking for