RMAN-03015: error occurred in stored script Memory Script
getting this error during
target db is 10202 & aux is 10204 ?
duplicate target database to dcxt;
RMAN> connect TARGET SYS/spurs_04@capq;
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: CAPQ (DBID=2420849281)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10039: error encountered while polling for RPC completion on channel clone_default
RMAN-10006: error running SQL statement: select action from gv$session where sid=:1 and serial#=:2 and inst_id=:3
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of Duplicate Db command at 05/21/2010 15:32:29
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
oracle:tuldcorpadb01:dcxt$
Edited by: DBA2008 on May 21, 2010 3:37 PM
never mind, i resolved this by switching duplicate db to 10203....and adjusting log_arch_dest .....
Similar Messages
-
Executing script: Memory Script
Hi all, I am trying to clone my database ( 9.2.0.1.0) in same system (Red Hat Enterprise Linux AS release 4), but its hung before finishing...
media recovery complete
Finished recover at 25-APR-08
printing stored script: Memory Script
shutdown clone;
startup clone nomount ;
executing script: Memory Script
This is the last few messeges I got...
Nishant SanthanHi Nishant,
I also faced the same thing during cloning, then I followed as...
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
Now go to the stby db opened in other screen. do
stby> alter database open;
here in C:> prompt you will get the following msg...
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/11/2008 16:04:35
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00444: background process
"" failed while starting
...now exit from RMAN> and startup stby DB from sql>
You try this, I hope it will come as my one worked.
Regards -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
U0093Critical program error occurred .u0093Client out of memory error u0093 - Query
I have a problem with Query in BI 7.0
Query works perfectly in BW3.5 environment. BI 7.0 Vista and Excel 2007 environment I have date range in the query If I provide date range 4 months interval it is working fine.
If I provide 5, 6,7, months interval I am getting the error ,
Critical program error occurred .The program has to close. Please refer to the trace for further information.
Communication error, CPIC return code 020, SAP returns code 223
Client out of memory error
When I execute each interval this query and calculated the no of records it is only less than 19,000 records.
The same query working fine in Bw3.5 for more than year interval.
Advance Thanks .It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range. You can have some filters on your query also.
Thanks...
Shambhu -
An Internal Error Occured - Invalid Stored Block Length
When try to sync im getting this on the client WINCE
CNS 9025,
Invalid Stored Block Length.
Any help????Note:395392.1
Applies to:
Oracle Lite - Version: 10.2.0.2.0
This problem can occur on any platform.
Symptoms
The mobile user is not able to synchronize and fails with this Error: "An internal error has occurred. invalid stored block lengths"
There was no any modification on the mobile client or Mobile Server.
Cause
This Error Comes from the Bug 5508302 "INVALID STORED BLOCK LENGTHS WHEN SYNCRONIZING "
Solution
Apply the one-off patch "5508302" which is available on Metalink on your Mobile Server following the Readme.txt patch
On the Mobile Client where there is the issue, run the program c:\mobileclient\bin\update.exe, to install the patch on the client.
The others Clients will receive the patch automatically by the dmagent. -
Hi:
I was doing a 11g database clone on linux using rman duplicate. After runing 40min, it stopped and got the following errors. All the file permission are the same 777, one third of files have been copied.
ORA-27041: unable to open file
Linux-x86_64 Error: 13: Permission denied
Additional information: 9
failover to previous backup
released channel: aux1
released channel: aux2
released channel: aux3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/30/2012 08:28:07
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archived log found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 12312 and starting SCN of 23167256063 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 12311 and starting SCN of 23167250994 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 12310 and starting SCN of 23167245674 found to restore
Thanks and regards.Files from source database:
-rwxrwSrwx 1 root root 48653824 May 29 20:57 db_t784587134_s1208_p1
-rwxrwSrwx 1 root root 48594944 May 29 20:57 db_t784587149_s1209_p1
-rwxrwSrwx 1 root root 7761920 May 29 20:57 db_t784587150_s1210_p1
-rwxrwSrwx 1 root root 4062945280 May 29 21:23 db_t784587170_s1211_p1
-rwxrwSrwx 1 root root 1124147200 May 29 21:07 db_t784587170_s1212_p1
-rwxrwSrwx 1 root root 2049015808 May 29 21:16 db_t784587725_s1213_p1
-rwxrwSrwx 1 root root 4012630016 May 29 21:36 db_t784588310_s1214_p1
-rwxrwSrwx 1 root root 4620419072 May 29 21:43 db_t784588726_s1215_p1
-rwxrwSrwx 1 root root 3724255232 May 29 21:52 db_t784589461_s1216_p1
-rwxrwSrwx 1 root root 1818624 May 29 21:43 db_t784589896_s1217_p1
-rwxrwSrwx 1 root root 2071040 May 29 21:52 db_t784590427_s1218_p1
There are about 30 dbf files on source database, 10 dbf files on target database now. -
I was executing RMAN DUPLICATE and received this error?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/08/2007 13:41:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01078: failure in processing system parameters
RMAN-04017: startup error description: LRM-00109: could not open parameter file
'/u01/app/oracle/product/10.2.0/dbs/initDPDEVUG.ora'
Anybody knows how to fix this error?I had this file only in CLONED databae $ORACLE_HOME/dbs. I copy this file into SOURCE database $ORACLE_HOME/dbs. Since duplicate initiation going from SOURCE to CLONED. May this is problem?
I am going to re start Clone process and let you know if this was the case -
Hi:
I got error at end when doing a RMAN clone on linux, RMAN 11.1.0.7. 89163 is the next to last highest sequence
number in the backup log file. So in the clone script I put 89165.
ORA-19870: error while restoring backup piece
ORA-19504: failed to create file
ORA-17502: ksfdcre:4 Failed to create file
ORA-15173: entry 'archive' does not exist in directory '/'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/19/2012 17:36:15
RMAN-03015: error occurred in stored script Memory Script
RMAN-20506: no backup of archived log found
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 89163 and starting SCN of 11158664662 found to restore
What is the problem here?
Can I bring up the database up?
Thank you for your help.Then you may get an error as below
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 89165you can try to open the database with resetlogs as you would not be having the archive sequence 89165
Also, 1 suggestion. Since you are on 11g, why not use the feature "active database" ?
rman target sys/pwd@target catalog xxxx auxiliary wwww
RMAN>duplicate target database to 'CLONEDB' from active database;This does not require you to take the backup first and then start the cloning activity -
Hi Gurus.
I have a primary database (RAC 2 nodes with ASM HP-UX 10g R2) and I need to duplicate this database to another machine (Linux single node 10g R2).
When I execute the duplicate command in RMAN I received the follow error:
channel ORA_AUX_DISK_1: reading from backup piece /backup/PAZ_database_5787_1.bak
ORA-19870: error reading backup piece /backup/PAZ_database_5787_1.bak
ORA-19505: failed to identify file "/backup/PAZ_database_5787_1.bak"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/29/2008 13:02:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
Somebody know what´s happening?
ThanksHi.
The command "List Backup of database" is OK and list
the last backup.
If I can´t to do a duplicate with different
plataforms, what can I do?
Thanks in advanced.Like said, use Transportable Tablespace, check Oracle doc,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref73 -
Hello,
I need help to fix the following issue with RMAN Backup;
ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile6_DatabasePRD (100:110:2)The database is 11.2.0.2 on HP-UX.
The backup script is;
BACKUP DATAFILECOPY FROM TAG 'INCREMENTAL' FORMAT 'Datafile%f_Database%d';Error logs:
channel t6_tape_backup: starting piece 1 at 13-JAN-13
RMAN-03009: failure of backup command on t1_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile6_DatabasePRD (100:110:2)
channel t1_tape_backup disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on t2_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile4_DatabasePRD (100:110:2)
channel t2_tape_backup disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on t3_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile1_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile1_DatabasePRD (100:110:2)
channel t3_tape_backup disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on t5_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile2_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile2_DatabasePRD (100:110:2)
channel t5_tape_backup disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on t6_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile5_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile5_DatabasePRD (100:110:2)
channel t6_tape_backup disabled, job failed on it will be run on another channel
channel t7_tape_backup: starting compressed full datafile backup set
channel t7_tape_backup: including datafile copy of datafile 00006 in backup set
input file name=+FLASH_DG/PRDstby/datafile/wpslog.3510.803139043
channel t7_tape_backup: starting piece 1 at 13-JAN-13
channel t8_tape_backup: starting compressed full datafile backup set
channel t8_tape_backup: including datafile copy of datafile 00004 in backup set
input file name=+FLASH_DG/PRDstby/datafile/wps.3509.803139043
channel t8_tape_backup: starting piece 1 at 13-JAN-13
RMAN-03009: failure of backup command on t4_tape_backup channel at 01/13/2013 11:12:51
ORA-19506: failed to create sequential file, name="Datafile3_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile3_DatabasePRD (100:110:2)
channel t4_tape_backup disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on t7_tape_backup channel at 01/13/2013 11:12:52
ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile6_DatabasePRD (100:110:2)
channel t7_tape_backup disabled, job failed on it will be run on another channel
released channel: t1_tape_backup
released channel: t2_tape_backup
released channel: t3_tape_backup
released channel: t4_tape_backup
released channel: t5_tape_backup
released channel: t6_tape_backup
released channel: t7_tape_backup
released channel: t8_tape_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03015: error occurred in stored script weekly_backup
RMAN-03009: failure of backup command on t8_tape_backup channel at 01/13/2013 11:12:52
ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
The backup file already exists: Datafile4_DatabasePRD (100:110:2)JohnWatson wrote:
Your format string needs to include a variable that will generate unique file names, such as %U.Thank you. You mean this will be the correct syntax?
BACKUP DATAFILECOPY FROM TAG 'INCREMENTAL' FORMAT 'Datafile%f_Database%d%U'; -
Rman Linux Error: 22: Invalid argument
Hi,
I have Oracle 8.1.7.0.1 running on Redhat 7.2
When I try to backup database using RMAN I get following
error:
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: disk1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03015: error occurred in stored script live_full_backup
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel disk1
RMAN-10035: exception raised in RPC: ORA-19504: failed to create file "/u03/oradata/backups/live/db_6_1_482765733.ora"
ORA-27044: unable to write the header block of file
Linux Error: 22: Invalid argument
Additional information: 2
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
Did anybody see this before ? Any ideas ?
d.make sure /u03/oradata/backups/live exists and is writable.
-
Error occurs in Content Player while storing results.
Hi Experts,
We have implemented LSO in our Org. and also use SCORM compliant web based courses.
We are facing a problem with few users as they go through the course, attempt the test but when they click on End Test
the following error message is shown in a Message Box.
" An error occured while storing the test results.
Do not close the test. Contact your system administrator. "
Not all users are facing this problem. Please help.If this is not the issue with all users that means the application/coding/configuration is fine. Do onething ask the user to clear temporary internet files,cookies then check it what happens.
Still the same problem persist then try to use trace and find out from where the issue is appearing with the help if ABAPer.
Thanks & Regards,
Sandip -
An error occurred while applying SQL script for the feature BackendStore.
Hello,
I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
occurred while applying SQL script for the feature BackendStore."
I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
I executed the SQL Setup Wizard and upgraded any instance to 2012.
Please guide.
Thanks, Divyaprakash KoliPlease check you have enough disk space for the disk where the folders are.
Check view log for detailed log information.
The following link is a similar thread for you to refer:
http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
Lisa Zheng
TechNet Community Support -
PLS-00201 error occurs when batching a stored procedure in SQL*Plus
I have a batch file to run a stored procedure and spool the results to file. When I enter the commands manually in sql*plus the output works fine and my results are spooled to the output file. But when I run the same commands in the batched script I get an error.
Any ideas?
Stored Procedure:
create or replace procedure MMP( p_cursor in out SYS_REFCURSOR)
as
begin
open p_cursorfor select name, id from table;
end;
batch file 1:
sqlplus -S user/pw@REPORTDV @sp_output_spooled.sql
script file sp_output_spooled.sql
Pasting these commands directly to the SQL*Plus command prompt spools the result set to file as expected.
set colsep '|'
set echo off
set feedback off
set termout off
set heading off
set linesize 9000
set pagesize 0
set trimspool on
set headsep off
spool output.TXT
var rc refcursor
execute MMP(:rc)
print rc
spool off
exit
The errors printed to output.TXT file after the batch is run and error occurs:
BEGIN MMP(:rc); END;
ERROR at line 1:
ORA-06550: line 1, column 8:
PLS-00201: identifier 'MMP' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
ERROR:
ORA-24338: statement handle not executed
SP2-0625: Error printing variable "rc"Hi,
Your code worked fine for me.
Is MMP procedure owned by the same user that is running the batch file or does it have proper privileges and synonym?
vr,
Sudhakar -
Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
MohammedHello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai
Maybe you are looking for
-
Why are my pics/video in iphoto being moved around?
My iphoto seems to swallow chunks of pics/video and store them in other places, ex. my external hard drive w/o my consent. It was working fine until I installed FCPX, could that have anything to do with it?
-
Expected PO Receipts and scheduled out sales orders
Hi Guys: in MRP Net requirements Calculation, for Example If want Consider Schedule out Sales orders( requested Delivery Date 02/02/2012) which is determined by planning horizon( 6 months 06/30/2012) , Since this sales order is within Planning Horiz
-
Expose ADF Business Components as Web Service
Hi, In order to expose ADF BC as Web Services, and return a set a rows from a table, I have followed the tutorial on this page : http://www.oracle.com/technology/tech/webservices/htdocs/series/pattern/ However, the set of rows returned are un-typed X
-
How can i write with double spaces between words ?
hello everyone, i need to write in pages with double spaces between words not between lines .. how can i do it and make it default ? for now, just write and click space bar twice ..!!!
-
How do I clear Dreamweaver CS6 image cache (on Mac)?
Hi, I have updated a remote image (absolute link) but it doesn't update in DW (CS6). How do I clear the image cache?