RMAN-04025 when performing automated TSPITR in Oracle 11g R2 (Enterprise)

Hi guys,
I'm sort of new to Oracle, so here is the problem I'm encountering:
I have a database ('foo'), in which I have created a tablespace ('blue') (not as sysdba, but as user01 with dba privileges). I also created a table in tablespace's datafile and then add some data. Then I took backup of this tablespace along with the current controlfile and archivelog (backup lies into the C:\app\[username]flash_recovery_area\foo\backupset\[date]). Then I deleted the data of this tablespace and tried to perform automated tpsitr. As you can see below, my restoration point is based on the scn tag, I got from backup list (of this 'blue' tablespace) and I defined the auxiliary destination in 'C:\backup', which is an existing folder in my computer. So, I keep constantly getting this rman-04025 error. RMAN results are posted as follows: RMAN> recover tablespace blue
2> until scn 1072119
3> auxiliary destination 'C:\Backup';
Starting recover at 26/02/13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=33 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified
point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='bsjC'
initialization parameters used for automatic instance:
db_name=FOO
db_unique_name=bsjC_tspitr_FOO
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=C:\Backup
log_archive_dest_1='location=C:\Backup'
#No auxiliary parameter file used
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 02/26/2013 12:11:43
RMAN-04025: unable to generate a temporary file
After a quick search in the Internet I saw that this error might refer to resource/ memory issues, but I yet don't know how to deal with it.
FYI my Oracle installation is on a i7-core processor 8GB RAM pc.
Any ideas or suggestions regarding this issue, would be really helpful.
Thanks in advance!

I found Metalink document 391785.1
this sounds very similar to what I am having
Even though this bug is said to be fixed in 11g - probably its not fully fixed
So , my only option is to use the manual way and create the auxiliary instance myself :-(
Orna

Similar Messages

Problem in Installing oracle 11g in enterprise linux

Hello all,
Iam new to linux and oracle .... I had downloaded enterprise linux from oraclewebsite, My question is i was not able to install oracle 11g in enterprise linux...
And when i am trying to install ./runInstaller
iam getting error message (permission denied).
is that necessary to install oracle vm server or manager .. if so how to do it .. Please give me clear idea how and where to start..

Hi,
The error message which iam getting is
[root@Karthik database]# ls -la
total 48
drwxr-xr-x 8 root root 4096 Sep 10 15:42 .
drwxr-xr-x 3 root root 4096 Sep 10 15:40 ..
drwxr-xr-x 12 root root 4096 Sep 10 15:42 doc
drwxr-xr-x 4 root root 4096 Sep 10 15:42 install
drwxr-xr-x 2 root root 4096 Sep 10 15:42 response
drwxr-xr-x 2 root root 4096 Sep 10 15:42 rpm
-rwxrwxrwx 1 root root 4352 Aug 13 23:56 runInstaller
drwxr-xr-x 2 root root 4096 Sep 10 15:42 sshsetup
drwxr-xr-x 14 root root 4096 Sep 10 15:46 stage
-rw-r--r-- 1 root root 5400 Aug 17 12:25 welcome.html
[root@Karthik database]# ./runInstaller
./runInstaller: line 137: /root/Desktop/linux_11gR2_database_1of2/database/install/.oui: Permission denied
The command
bash ./runInstaller.sh didnt helped. again got the error of bash: ./runInstaller.sh: No such file or directory
Thanks,
karthik

What is the diffrences between Oracle 11g standard & enterprise edition

Hi,
Can anybody please tell the diffrences between Oracle 11g standard & enterprise edition in detail.
Thanks in advance,
Anindya

Oracle Enterprise Edition:
Enterprise Edition is the full (top of the range) version or the Oracle Database Server. Options like RAC, Partitioning, Spatial, etc. can be purchased separately to enhance the functionality of the database.
Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
Oracle Standard Edition One:
Standard Edition One is a low cost, entry-level version of the Oracle Standard Edition database server. Standard Edition One can only be licensed on small servers with a maximum capacity of two processors.
Oracle Personal Edition:
Personal Oracle is a single user version of the database server. It is mostly the same as Enterprise Edition, but doesn't support advanced options like RAC, Streams, XMLDB, etc.
Oracle Lite:
Oracle Light is a database engine that can be used on mobile platforms like cell phones and PDA's.
Oracle XE:
Express Edition (XE) is a free, downloadable version of the Oracle database server. Oracle XE can only be used on single processor machines. It can only manage up to 4 GB of data and 1 GB of memory. ISVs can embed XE in 3rd party products and redistribute it freely.
Additional Reading:
Oracle10g Database Licensing Guide
(Part of the Oracle 10g Documentation Set)
Oracle9i Database New Features Guide
Chapter 5: Database Feature and Option Availability
Oracle Store
http://store.oracle.com/
source:http://www.orafaq.com/faq/what_is_the_difference_between_the_enterprise_standard_and_personal_editions_of_oracle

Error while performing automated TSPITR

Hi
I am trying to perform full automated point in time reconvery on our 11g database
the backups are on tape.
this is the log file :
Recovery Manager: Release 11.1.0.6.0 - Production on Mon Jul 13 14:55:13 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: KGCSP (DBID=2179340697)
connected to recovery catalog database
+RMAN> run{+*
+2> ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE' parms 'ENV=(NSR_SERVER=bkpnyc02.ibasis.net,NSR_DATA_VOLUME_POOL=DBBACKUP, NSR_CLIENT=timskn+
ycdb01, NSR_GROUP=RMAN_2_WEEKS)';*
+3> ALLOCATE CHANNEL ch01 TYPE 'SBT_TAPE' parms 'ENV=(NSR_SERVER=bkpnyc02.ibasis.net,NSR_DATA_VOLUME_POOL=DBBACKUP, NSR_CLIENT=timskn+
ycdb01, NSR_GROUP=RMAN_2_WEEKS)';*
+4> ALLOCATE CHANNEL CH03 DEVICE TYPE DISK;+
+5> recover tablespace MRTR_P20090210,MRTR_P20090211+
+6> until time "to_date('07/06/2009 06:00:00','mm/dd/yyyy hh24:mi:ss')"+
+7> auxiliary destination '/u07/recover_dir';+
+8> release channel ch00;+
+9> release channel ch01;+
+10> }++11>+
+12>+
allocated channel: ch00
channel ch00: SID=528 device type=SBT_TAPE
channel ch00: NMO v4.2.0.0
allocated channel: ch01
channel ch01: SID=227 device type=SBT_TAPE
channel ch01: NMO v4.2.0.0
allocated channel: CH03
channel CH03: SID=114 device type=DISK
Starting recover at 13-JUL-09
Creating automatic instance, with SID='eujh'
initialization parameters used for automatic instance:
db_name=KGCSP
compatible=11.1.0.0.0
db_block_size=8192
db_files=2000
db_unique_name=tspitr_KGCSP_eujh
large_pool_size=1M
shared_pool_size=110M
processes=50
+#No auxiliary parameter file used+
db_create_file_dest=/u07/recover_dir
control_files=/u07/recover_dir/cntrl_tspitr_KGCSP_eujh.f
starting up automatic instance KGCSP
Oracle instance started
Total System Global Area     213041152 bytes
Fixed Size                     2099464 bytes
Variable Size                147789560 bytes
Database Buffers              58720256 bytes
Redo Buffers                   4431872 bytes
Automatic instance created
contents of Memory Script:
+{+
+# set the until clause+
set until time "to_date('07/06/2009 06:00:00','mm/dd/yyyy hh24:mi:ss')";
+# restore the controlfile+
restore clone controlfile;
+# mount the controlfile+
sql clone 'alter database mount clone database';
+# archive current online log for tspitr to a resent until time+
sql 'alter system archive log current';
+# avoid unnecessary autobackups for structural changes during TSPITR+
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
+# resync catalog after controlfile restore+
resync catalog;
+}+
executing Memory Script
executing command: SET until clause
Starting restore at 13-JUL-09
Removing automatic instance
shutting down automatic instance
Oracle instance shut down
Automatic instance removed
released channel: ch00
released channel: ch01
released channel: CH03
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/13/2009 14:55:23
RMAN-03015: error occurred in stored script Memory Script
RMAN-06034: at least 1 channel must be allocated to execute this command+
Why do I get this error ?
I cannot allocate an auxiliary channel because then I get the error :
RMAN-06174: not connected to auxiliary database
And I cannot connect to the auxiliary DB - it was not created yet ( that's the whole point of the automated TSPITR , I believe )
thanks in advance
Orna

I found Metalink document 391785.1
this sounds very similar to what I am having
Even though this bug is said to be fixed in 11g - probably its not fully fixed
So , my only option is to use the manual way and create the auxiliary instance myself :-(
Orna

Performance problems on a Oracle 11G with Windows 2008 64bits.

Hi everyone,
I have noticed that our db is going low and low every week. My server has 16GB RAM and 10GB are dedicated to the Oracle database, this is a 11.2.0.1 with Windows 2008 R2 SP1 64bits. I like to know acording to the nexts values what you guys recommend to adjust in the init.ora:
orcl.__db_cache_size=5402263552
orcl.__java_pool_size=33554432
orcl.__large_pool_size=33554432
orcl.__pga_aggregate_target=3657433088
orcl.__sga_target=6878658560
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=1308622848
orcl.__streams_pool_size=33554432
*.memory_target=10511974400
*.open_cursors=5000
*.optimizer_mode='RULE'
*.processes=300
Acording to the memory target on how values can be increased the processes, pga_agregate_target, etc.
Also we have problems related to the bug Bug 9593134 that “Connections to Oracle 11g are slow and can take anywhere from 10 seconds to 2 minutes.” there is a fix on linux by removing the dns names on it but anyone have experience on windows platforms?
Thanks for all and sorry for my english.
Regards.
Arturo.

Regarding the long connection times, have you tried using network packet capture software (such as Wireshark) to determine what the client computer is doing when a connection attempt is initiated?
The Oracle Database time model statistics, along with the system wide wait events may help you diagnose the non-connection related performance issues (you should not just look at the statistics, but instead capture the current values, wait a period of time, capture the statistics again, and compare the changes in the statistic values). A statspack report might also help you - but a 10046 trace at level 8 or 12 is more appropriate if you are able to identify a couple of sessions that experience performance problems.
I do not suggest just blindly modifying parameters, although I am curious to know:
* Why the session level parameter OPEN_CURSORS is set to 5000 - do you expect a single session to hold open 5,000 cursors?
* Why are you using the deprecated RULE based optimizer?
* Why is the MEMORY_TARGET parameter used when the SGA_TARGET and PGA_AGGREGATE target are specified?
Charles Hooper
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

ORA-12154 error when trying to connect to Oracle 11g DB from Excel 2010

All,
I am trying to set up Excel 2010 64-bit to connect to an Oracle 11g database, but am having some trouble due to an "ORA-12154 could not resolve the connect identifier specified" error. I am able to TNSping the SID name, as well as connect to SQLplus. The TNS entry works, and the Oracle Home is in the right spot. I am even able to put the full connection string in the "Data Source" field when creating a data link in Excel and have it connect to the DB. But I would like to be able to create one that used the SID rather than the full connection string, as other users will have to use this. The developer behind the Excel solution created a number of .odc files to connect to various databases, so this gives extra weight behind figuring out how to connect via a SID rather than a full connection string. Any suggestions?

user10832104 wrote:
All,
I am trying to set up Excel 2010 64-bit to connect to an Oracle 11g database, but am having some trouble due to an "ORA-12154 could not resolve the connect identifier specified" error. I am able to TNSping the SID name, as well as connect to SQLplus. The TNS entry works, and the Oracle Home is in the right spot. I am even able to put the full connection string in the "Data Source" field when creating a data link in Excel and have it connect to the DB. But I would like to be able to create one that used the SID rather than the full connection string, as other users will have to use this. The developer behind the Excel solution created a number of .odc files to connect to various databases, so this gives extra weight behind figuring out how to connect via a SID rather than a full connection string. Any suggestions?
If you are able to connect with sqlplus, then this really becomes a question of how to define a data connection in Excel.
But after quickly googling ..
In excel ...
"Data" tab
"from other sources"
"from data connection wizard"
select ODBC DSN
On data link properties, select the "connection" tab
select "Use Data Source Name" and hit the drop-down
select a dsn that you had previously set up to point to the oracle database.
Anyway, that looks like how it is supposed to be done. I'm getting a dll initialization error. Probably due to the fact I have both 32-bit and 64-bit oracle clients, and windows never handles that very gracefully. But then Windows never graceffully handles anything that isn't MicroSoft. To paraphrase Forest Gump, "My momma always said Windows was like a box of chocolates. You never know what you're going to get."
In any event, the error you report means it was actually tying to look it up in tnsnames, but what you supplied wasn't found there. That can also be a big issue when dealing with MS products, because they don't use the same terminology, so lead people into entering something other than what Oracle expects. Are you referencing an ODBC DSN? If so, have you tested that apart from Excel?

Error when installing APEX 3 on Oracle 11g !!

I have Oracle db 11g on Windows Vista and there is no problem with the database. The problem is when I try to install Oracle Application Express (Apex) 3. After unzipping the Apex zip file to somewhere on my hard disk, I log to the database as sysdba using the command-line SQL*Plus to install the Application Express, but everytime I try to run the apexins.sql file the command-line SQL*Plus window disappears suddenly and the installation does not proceed !! I did all the prerequisite tasks according to the Apex installation guide and everything seemed good until I reached the installation process.
Please help !

Hi Joel,
Yes, see
Re: unable to import applications into Apex on XE
That was on a XP Pro machine.
I'm trying to do the same on a linux machine now and getting the same issues. It might still relate to the downloaded file I was using. I'm about to try and copy the apex folder from the XP pc to the linux pc and try again. :-(
BTW, I can't find the 11g XE download link. Is it avaliable yet?
Many thanks
Regards
Bryan

Oracle 11g-R1 Enterprise Manager Not Working

Hi to All Respected Gurus!
I am unable to access enterprise manager. When I enter https://10.0.2.106:1158/em, it gives me a window with following messages
Database Instance = Down, Host = 10.0.2.106, Port = 1521, SID = fgfc, Oracle Home= D:\app\Administrator\product\11.1.0\db1_
Listener = UP
Agent Connection to Instance = Down, Status = Failed, Details = ORA-28001: the password has expired (DBD ERROR: OCISessionBegin)
Please help me in this regard. Thanks in advance for your as usual cooperation.

Your DBSNMP password has changed or the DBSNMP has a (default) profile that forces you to change the password every xx days. I think the last is the case.
You could create a new profile with a password_life_time unlimited for the user DBSNMP or change in the default profile the password_life_time to unlimited (if security rules permit to do so).
Also see MOS note (for Grid Control): Grid Control Shows DBSNMP Account Locked ORA-28000 Or Agent Connection to Instance Failed ORA-28001 Password Expired From Database Home Page [ID 352585.1]
and https://communities.netapp.com/community/netapp-blogs/databases/blog/2011/08/10/oracle-11g--password-expires how you can create a new profile or change the default profile.
If the DBSNMP account gets locked you can unlock it by: alter user dbsnmp account unlock;
Eric

Oracle 11g client - Enterprise Manager Console?

Hello, we use 10g Enterprise Manager Console on our windows desktops as a gui tool. We installed the administrator version of 11g client, but I cannot find the Enterprise Manager Console. Does anyone know where this is?
Thanks!

This is what I understand from doc:
OEM Grid Control does not require an additional license if the follow this rule (from
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ)
>
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
>
and if you don't use any management packs http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#CIHGFIAF
If you really want to be sure you need to confirm this with your sales representative.
Edited by: P. Forstmann on 2 sept. 2010 17:58
Edited by: P. Forstmann on 2 sept. 2010 18:03

Oracle Text index hangs(Oracle 11g linux enterprise edition)

Hi guru,
One very criticial and showstopper issue coming in Oracle Text Indexing.
I have table ResourceTable(ResId,Contents blob ,docformat)
I am creating text index on Contents column by using follwing command:
create index [IndexName] on [TableName] (contents) indextype is ctxsys.context ('lexer mylex stoplist ctxsys.default_stoplist format column ISDOCFORMAT sync(every "sysdate+1/24") storage my_text_storage memory 200M')parallel 2
I found there is one document of text/html type which hangs oracle text indexing thread.Oracle doest not give any error message keep using CPU 100% and no progress.
I then create test table with same stucture and put this corrupted documet record in this table.and did indexing again but its not doing index /not ignoring it and hangs .We have also tried to use timeout feature of inso filter so that if such type of document comes at the time of indexing oracle text indexing process will bypass it after specific time interval but still same issue comes and oracle is not bypassing such faulty document.
This is realy show stopper issue and any kind of help will be greatly appricited.

You need to raise an SR with Oracle Support for this, and send them the file which is causing the hang. It should then be easy to investigate the problem and schedule a fix.
If you don't have a support contract, you could send the file to me and I'll raise a bug. However, if we fix it you won't be able to get the fix until it appears in the next downloadable version.
- Roger
roger.ford @ oracle.com

Oracle 11g Performance tuning approach ?

Hello Experts,
Is it the right forum to follow oracle performance tuning discussions ? If not, let me know what will be the forum to pick up some thread on this subject.
I am looking for performance tuning approach for oracle 11g. I learned there are some new items in 11g in this regard. For persons, who did tuning in earlier versions of Oracle,
what will be the best way adopt to 11 g?
I reviewed the 11g performance tuning guide, but I am looking for some white papers/blogs with case studies and practical approaches. I hope that you have used them.
What are the other sources to pick up some discussions?
Do you mind, share your thoughts?
Thanks in advance.
RI

The best sources of information on performance tuning are:
1. Jonathan Lewis: http://jonathanlewis.wordpress.com/all-postings/
2. Christian Antognini: http://www.antognini.ch/
3. Tanel Poder: http://blog.tanelpoder.com/
4. Richard Foote: http://richardfoote.wordpress.com/
5. Cary Millsap: http://carymillsap.blogspot.com/
and a few dozen others whose blogs you will find cross-referenced in those above.

Oracle 11g Remote Connection issue

When I try to connect to Oracle database remotely using SQLPlus or SQLDeveloper I get the following error.
ORA-01017: INVALID USERNAME/PASSWORD; logon denied.
Server details:
Oracle 11g on Enterprise Linux 4
I can connect using SQLPlus on the server.
SHOW SQLCASE is MIXED
Client details:
Windows Server 2003 enterprise Edition
Oracle 11g Client.
From remote computer my TNSPING to that server works perfectly.
For the same connection string I can’t connect from client. I am sure I am not typing bad password.
Any thought on this will be helpful.
Thank you,
Smith

Did the following steps and still not able to connect.
1. Cross checked that the REMOTE_LOGIN_PASSWORDFILE is set to EXCLUSIVE.
2. Created the PASSWORD file at the server using the tool ORAPWD
3. Restarted the server and started the Oracle listener and database.
4. Connected to the database using PLSQL in server to make sure it works fine there.
5. Checking at the client box to connect to the database. It fails and I am looking for help again at forum.
Now it is connecting using remote connection(sqlplus and sqlDeveloper) to the server. Interestingly the password are not the same when I connect remotely and from the server.
I am sure it is connecting to the same database both the occasion. I shut down the server and try to connect or v$version results indicates that I connecting to the same database.
Any jestification on this? I am getting lost here.
Thank you,
Smith
Edited by: user517525 on Feb 16, 2010 1:44 PM
Edited by: user517525 on Feb 16, 2010 2:22 PM

Oracle 11g needs group by - why?

Hi folks,
I thought migrating a 10.2 DB to 11g would face no problems, but on a 11g db the following code will produce a ora-00979 error ( which was functional under 10.2
UPDATE OBJEKT o SET
       ( o.herstellungskosten
        , o.angemess_valutierungsstand
       ) =
       ( SELECT c.o_herstellungskosten
                   , b.o_angemess_valutierung
         FROM obj_gewerk_calc_vw b
                 , read_obj_herstkosten_all_vw c
         WHERE b.o_obj_id = o.obj_id
          AND b.o_obj_id = c.o_obj_id (+)
       WHERE o.obj_id BETWEEN obj_von AND obj_bis
       ;the inline-query ( the internally iterating, surrounding update statement gives all obj_ids into the select, therfore the where-clause is for testing modified from c.o_obj_id = o.obj_id to c.o_obj_id > 0, and for better explanation the obj_id is additionally selected ) as:
SELECT b.o_obj_id
           , c.o_herstellungskosten
           , b.o_angemess_valutierung
FROM obj_gewerk_calc_vw b
        , read_obj_herstkosten_all_vw c
WHERE c.o_obj_id > 0
   AND b.o_obj_id = c.o_obj_id (+) the result is:
O_OBJ_ID, O_HERSTELLUNGSKOSTEN , O_ANGEMESS_VALUTIERUNG
1, -1561871,85 , 403600
201, -573162,43 , 811214,9
222, 0 , 1888680
242, -1583060,05 , 2759600
285, -10000 , 0
Environmental information:
Windows7 64bit Workstation, oracle 11g 64bit Enterprise server running on that WS, using Quest Toad for testing and debugging
since this update statement definitely works under 10g, I wonder if it is a bug under 11g.
Could anybody help ?
thanks in advance,
Wilko

True :-) I too have been a "victim".
It would help if unintentional duplicate posts were edited to change the topic to "Ignore - Unintentional duplicate post due to network/software glitch" (or words to that effect), provide a link to the active post being responded to, and mark the duplicate post as answered. Maybe it is just too much to ask ? ;-)
Srini

Oracle 11g Enterprise vs Satandard Edition

Dear All,
I would be most grateful if you please tell me what are the benefits of Oracle 11g Database Enterprise Edition over Oracle 11g Database Satandard Edition. Don't consider license money. If you would please provide me detailed comparision of these both plus send me link on that I will be thanks ful.
Kind regards.
GM

Oracle Enterprise Edition:
Enterprise Edition is the full (top of the range) version or the Oracle Database Server. Options like RAC, Partitioning, Spatial, etc. can be purchased separately to enhance the functionality of the database.
Oracle Standard Edition:
Standard Edition is designed for smaller businesses and enterprises. It offers a subset of the features/ functionality implemented in Enterprise Edition. Database options like Data Guard, Partitioning, Spatial, etc. is not available with Standard Edition (from 10g one can use RAC with Standard Edition). Standard Edition can only be licensed on servers with a maximum capacity of four processors.
You may want to refer to this link for further details on EE and SE differences --> http://www.oracle.com/database/product_editions.html
~ Madrid
http://hrivera99.blogspot.com

How to set Oracle 11g as Primary Oracle Home

Hi All,
I've Windows 7 operating system & have Oracle 11g client ( enterprise edition), Oracle 10g XE and Oracle Developer Suite 10g. I want to know how can I set Oracle_11g_home as my primary oracle home.
Note: Currently, the home of Oracle Developer Suite 10g is my primary home as it gets invoked whenever I type sqlplus in the command prompt or tnsping my remote database from command prompt.
Regards,
MK

You have two options. Either edit your %PATH% environment variable and place the Path related to your 11g home first. Another option is to add an ORACLE_HOME environment variable that points to your 11g home.
Hope this helps!

RMAN-04025 when performing automated TSPITR in Oracle 11g R2 (Enterprise)

Similar Messages

Maybe you are looking for