RMAN don't take the device

Hello here is my environment,
Server: Hardware HP ML350 G5 / Intel QC E5320 @ 1.86GHz
Tape: HP 960 / Ultrium 3-SCSI Firmware G64D
OS SLES 9 SP3
Kernel : 2.6.5-7.244-smp #1 SMP Mon Dec 12 18:32:25 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux
Oracle Version 10.2.0.3.0
Oracle Secure Backup Release 10.1.0
Secure Backup Config:
hostname admin,mediaserver,client (via OB) in service
ob> lsdev -l
tape1:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Automount: yes
Error rate: 8
Query frequency: [positioning unsupported]
Debug mode: yes
Blocking factor: (default)
Max blocking factor: (default)
UUID: 4965e1a4-4e66-102a-a0ea-001cc41380b8
Attachment 1:
Host: hostname
Raw device: /dev/obt0
The Filesystem with Oracle Secure works fine but if I try to use RMAN or the EM Interface for Backup I get this error message
2007/09/27.16:34:56 Dispatching job to run on administrative server.
2007/09/27.16:34:59 Backup completed with status "cannot open tape drive".
2007/09/27.16:34:59 (Diagnostic data: 0x20008F06/41, dev_delay 60, data_delay 0, fail.)
2007/09/27.16:34:59 Error: job encountered device error. (The job is retryable immediately,
2007/09/27.16:34:59 however the device is not in service for 1 minute or until the
2007/09/27.16:34:59 operator corrects the problem and manually places it in service.)
2007/09/27.16:34:59 Job failed.
The drive is in service and have a unlabeled new tape but secure backup cancel the job after same seconds
Any suggestion for solve debugging that case?

The same problem:
RMAN backup and restore from administrative,media,client server (DSI0101) works fine.
RMAN backup from media,client server (DSI0102) works fine.
But...
[oracle@DSI0102] RMAN> run {
allocate channel oem_sbt_backup1 type 'SBT_TAPE';
restore archivelog sequence=25005 from tag='mcba';
2008/11/14.08:51:18 Transcript for job oracle/1998.1 running on DSI0101
2008/11/14.08:52:55 Info: volume in tape4 is usable for this operation.
Error: cannot open backup image file DSI0102:/dev/obt4: Invalid argument
2008/11/14.08:52:55 Restore completed with status "cannot open tape drive".
2008/11/14.08:52:55 (Diagnostic data: 0x20008F06/41, dev_delay 60, data_delay 0, fail.)
[root@DSI0102 ~]# obtool pingdev "DSI0102:/dev/obt4"
Info: drive tape4 via host DSI0102 accessible.
[root@DSI0101 ~]# obtool pingdev "DSI0102:/dev/obt4"
Error: can't open drive tape4 via host DSI0102 - Invalid argument
[root@DSI0101 ~]#
Ping from GUI: Configure: Devices
Command      /u01/app/oracle/backup/.bin.linux86_64/obtool --gui -u admin pingdev "tape4"
Status      drive tape4 via host DSI0101 accessible.can't open drive tape4 via host DSI0102 - Invalid argumentcan't open drive tape4 via host DSI0103 - Invalid argumentcan't open drive tape4 via host DSI0105 - Invalid argumentcan't open drive tape4 via host DSI0104 - Invalid argumentcan't open drive tape4 via host DSI0110 - Invalid argument
Marcin
Edited by: MarcinB on Nov 14, 2008 10:47 AM
[root@DSI0101 ~]# obtool pingdev -a
Info: library lib1 via host DSI0101 accessible.
Error: can't open library lib1 via host DSI0102 - Invalid argument
Error: can't open library lib1 via host DSI0103 - Invalid argument
Error: can't open library lib1 via host DSI0105 - Invalid argument
Error: can't open library lib1 via host DSI0104 - Invalid argument
Error: can't open library lib1 via host DSI0110 - Invalid argument
Info: drive 1 tape1 via host DSI0101 accessible.
Error: can't open drive tape1 via host DSI0102 - Invalid argument
Error: can't open drive tape1 via host DSI0103 - Invalid argument
Error: can't open drive tape1 via host DSI0105 - Invalid argument
Error: can't open drive tape1 via host DSI0104 - Invalid argument
Error: can't open drive tape1 via host DSI0110 - Invalid argument
[root@DSI0102 ~]# obtool pingdev -a
Info: library lib1 via host DSI0101 accessible.
Info: library lib1 via host DSI0102 accessible.
Info: library lib1 via host DSI0103 accessible.
Info: library lib1 via host DSI0105 accessible.
Info: library lib1 via host DSI0104 accessible.
Info: library lib1 via host DSI0110 accessible.
Info: drive 1 tape1 via host DSI0101 accessible.
Info: drive 1 tape1 via host DSI0102 accessible.
Info: drive 1 tape1 via host DSI0103 accessible.
Info: drive 1 tape1 via host DSI0105 accessible.
Info: drive 1 tape1 via host DSI0104 accessible.
Info: drive 1 tape1 via host DSI0110 accessible.
Edited by: MarcinB on Nov 14, 2008 10:50 AM
Configure: Host: DSI0101
IP interface name(s): DSI0101 changed to 10.66.......
[root@DSI0101 ~]# obtool -u admin pingdev -a
Password:
Info: library lib1 via host DSI0101 accessible.
Info: library lib1 via host DSI0102 accessible.
Info: library lib1 via host DSI0103 accessible.
Info: library lib1 via host DSI0105 accessible.
Info: library lib1 via host DSI0104 accessible.
Info: library lib1 via host DSI0110 accessible.
Info: drive 1 tape1 via host DSI0101 accessible.
Info: drive 1 tape1 via host DSI0102 accessible.
Info: drive 1 tape1 via host DSI0103 accessible.
Edited by: MarcinB on Nov 14, 2008 11:17 AM

Similar Messages

  • The volume button ( ) is not working.  Can I take the device to any Apple store in the U.S. for this to be resolved?

    The volume button is not working.
    Can I take the device to any Apple store in the U.S. for this to be resolved?

    supergabu wrote:
    I need to take it and how long I have an answer?
    We wouldn't know that answer.  You'll know when you take in to the Apple store to have it looked at.

  • Need to cancel an auto renewal subscription but don't have the device.  can i do it fron itunes.

    need to cancel an auto renewal subscription but don't have the device.  can i cancel from itunes?

    Yes, see that topic of:
    iTunes Store: Purchasing and managing auto-renewing subscriptions

  • HT201407 i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    Where did you buy this iPhone and how did you unlock it?

  • TS1591 iphoto recognises my iPhone but iTunes and finder don't see the device?

    Folks,
    Iphoto autmatically detectgs my iphone 5s when i connect it to my imac. Howver, both finder and itunes don't see it as a device. If i sign into itunes store the device sees the apps currently on my phone but i can't access my songs to play. Am i missing something?

    Did you follow the instructions on the page you came from?
    FYI: You will not see the iPhone in the Finder.

  • On our project site, with Firefox 4 and 5, buttons don't take the keyboard focus if you mouse-click on them. Is this a problem of our site?

    On a page like http://www.ori.uzh.ch/links.html, clicking a link opens a new tab, and after closing that tab, you can move to the next link with the tabulator key. On that site, it still works with Firefox 5. I also worked on our project site (password secured, sorry) with Firefox up to 3.6.18. But now, if I open a link with the mouse, close that tab again and press the tab key, the focus just goes to the first clickable button, as if I had not clicked any button previously. If I open a link by tab key and "enter", the keyboard focus is preserved on that button. But there are many many buttons on our pages, and they reload frequently.
    BTW I adjusted the system preferences, so that the keyboard focus moves between all controls. (see http://www.tipstrs.com/tip/1505/Tab-key-to-select-form-elements-in-Firefox-on-the-Mac). But I don't think the problem is related to that.

    I found out that our buttons are no links, but input tags, type="submit". I'll discuss the problem with our programmer.

  • CUCM 9.1.1.20000-5 don't have the device packages for 8831

    Hi all,
    I have just tried to add the device for 8831 and I didnt see that option available? Can someone guide be to getting the device packages for this version. I went on the software download site and it didnt have any device packages for that version of call manager.
    Please advise what are my next steps?

    Hi,
    you can refer the matrix.What is the UCXN version u are using ?
    Supported Version Combinations for Cisco Unity Connection 2.x and Later with Cisco Unified Communications Manager
    Cisco Unity Connection
    2.x and Later
    Cisco Unified Communications Manager
    9.1(2), 9.1(1), 9.0(1),8.6(2),8.6(1),8.5(1),8.0(x), 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x), 5.0(x), 4.3(x), 4.2(x), 4.1(3)
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html#wp100363
    you can upgrade if your H/W permits and u have UCSS/ESW contract .Also, if looking for any new features on UCXN 9
    regds,
    aman

  • Don't take the low cost IPAD scam.. they are nearly 4 years old!

    When I upgraded my iphone 4 to an iphone 6 three weeks ago, I was offered a low cost mini ipad.  I took the deal only to find out later that the ipad you are given is an ipad 1, approx 4 years old now.  The mini ipad 3 is now available.  I heard something about 30 days return, but when I tried to return it today, was told...no its only 14 day return and I am 9 days over the limit.  They willl not take back this obsolete piece of equipment.  They would, with a $170 cancellation fee, plus a $70 return fee, or I could cancel my entire service for only $700.00 plus fee!  ATT is providing mini ipad 3s at a discount, but I decided that since I had used Verizon since pre Alltel days, I would stay with them.  I will be gone in 2 years.  Will post to my facebook tomorrow!  Scam alert!

    Twilly wrote:
    This is not a philosophical discussion on hindsight, rather an observation of dirty, and underhanded practices condoned by a large conglomerate that no longer cares about there customers and continues to take advantage of there position. The same goes for there pseudo company that are set up for collect or prepaid calls to people in dire straights such as prison or military. Evil underhanded snakes.
    Or a discussion that sales people do what they have done for centuries, even millennium, try to make you buy things you really don't want or need.

  • Move file in another folder don't take the parent permission

    Hello, i am seeing this support page where explain my problem
    http://support.microsoft.com/kb/310316
    i see that the "MoveSecurityAttributes" is not supported in windows 8.1 and i see that there is an hotfix for windows 7 here:
    http://support.microsoft.com/kb/2617058
    but for windows 8.1? how can fix this? It is incredible that if i want adding file at a shared folder they haven't everyone access and i need to add them manually each time.

    Please be more specific about precisely what you're doing, Atomicoz, and what you're expecting to happen that's not happening.  The kb310315 article you provided a link for just explains a behavior of the NTFS implementation in Windows 2003 and earlier,
    which (IMO) is not robust, security-wise.
    Your last sentence begins to describe what you're trying to do, but it's just not complete enough to provide specific help with.  I suspect permissions on the parent folder can be set so that you don't have to change permissions on every file you copy
    into it, but I can't quite say just based on what you've written.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Dynamic Live Stream don´t take the best stream for my bandwith

    Hi @all,
    I hope someone can help me with my problem - btw. sorry for my English!
    I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
    AS3:
    import fl.video.*;
    VideoPlayer.iNCManagerClass = NCManagerDynamicStream;
    myPlayer.fullScreenTakeOver = false;
    var dsi:DynamicStreamItem = new DynamicStreamItem();
    //myVideo.source = "dynamicStream.smil"
    dsi.startRate = 1548;
    dsi.uri = "rtmp://x.x.x.x.x/dani_/";
    dsi.addStream("test548", 548);
    dsi.addStream("test848", 848);
    dsi.addStream("test1548", 1548);
    myPlayer.play2( dsi );
    My Encoder is setup with three streams:
    Vid: 500 kbps - Audio: 48 kbps
    Vid: 800 kbps - Audio: 48 kbps
    Vid: 1500 kbps - Audio: 48 kbps
    I start the encoder and everything looks fine in the log.
    In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate.
    I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
    My network connection is on a 100MBit leasd line, so I don´t think that my connection is the problem
    What did I wrong? Or Have I missunderstood something in the examples for dynamic streaming?
    Regards from Munich/Germany
    Daniel
    EDIT: Must I change something in the ini-file or in a nother config-file of the server.
    Nachricht geändert durch 77nautius

    I working a little bit on my problem.
    I put an text area in my script to see which stream is taken.
    I slow down the bandwith to 100, 200 and 350 kbps and - surprise surprise only the 100 kbps stream was taken by my app.
    Nobody any idea what the problem can be?
    Regards,
    Daniel

  • How to deauthorise when you don't have the device

    Hi, I seem to have five devices authorised on my account but at least 1 of these is an old laptop that I forgot to deauthorise. Is there anyway to address this as I cannot authorise my present laptop.

    Use the Deauthorize All command documented in this article.
    (100148)

  • ExecuteWithParams, bindVariable don´t take the current value of textfield

    Hello,
    i use a bind variable to select only the rows with the same date. (ExecuteWithParams)
    Therefor i added the bind Variable as a JTextfield to my client.
    If i type the date to the textfield it works, but if i add current date by pressing a button, the filter ignores the value of the textfield.
    After a mouseklick into the textfield it works again.
    Thank you
    AK
    JDeveloper: 10.1.3.0.4.3673
    ADF BC: 10.1.3.36.73
    Java: 1.5.0_05

    Hi,
    how do you add the current date? You should set the date in the binding layer if you want it to also show in the textfield. The panelBining variable is a handle to the binding. From here you can cal get("name of the attribute"), cast it to control binding and cal setInputValue
    Frank

  • I've lost my iphone. How can I find it? The weird thing is that i don't see the device in find my iphone while i had set it up.

    How can i find it back?

    It won't show if it's switched off. It won't show if it's been restored. It won't show if the SIM has been removed. It won't show if
    the battery is dead.
    You are sure that you enabled "Find My iPhone in the Settings of the phone?  The application of the same name is nothing more than an alternative to searching via iCloud, and has no impact on whether or not the phone can be found.

  • My uncle has died and we are trying to access his iPad but don't know his code so the iPad is disabled. Can we unlock it without resetting the device as we don't know if he's backed it up our not and don't want to lose whatever he has on there?

    My uncle passed away recently and we are trying to access his iPad but don't know his code so the iPad is disabled. Can we unlock it without having to reset it as we don't know if he's backed anything up and we don't want to lose whatever is on there... thanks in advance.

    About all you can do is take the device to an Apple Store along with the death certificate and explain the situation...if someone can do something, it would be them.

  • I don't have the option to add a device on either the iphone or the computer. Both devices tell me to go to "add a device" and neither device give me that option.

    I set up sync and downloaded firefox home which I opened. I clicked I already had a sync account and it asked me to add the passcode to my computer under add a device, which is not an option that comes up. Only thing that comes up on my vista computer is set up sync which tells me to go to add a device on my iphone which also does not come up. It is a never ending loop. I tried entiring the passcodes that come up on both devices in both devices alternating codes but none work and they also keep changing.

    This happens when you PC disconnects from the sync server. If you go to Tools > Options and then the Sync tab in Firefox 4 and it's not showing your email address with options to manage your sync account, then you've been logged out.
    From that window you need to press Connect and use the option "I don't have the device with me" which will allow you to reconnect to the sync server using your email address and sync key you first got when you created the account.
    Once you've logged back in, the option to enter the phone's pass code will appear.

Maybe you are looking for