RMAN (DP6.0) backup failure on Oracle10g

Hello,
I am using DP6.0 with Oracle10g environment for backup.
While I was able to successfully able to allocate the channels I am getting the below error message stack when the backup script is executed.
Thanks
RMAN> CONNECT TARGET *
2> run {
3> allocate channel 'dev_0' type 'sbt_tape'
4> parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=<SID>,OB2BARLIST=<SID>BAZAORACLE,OB2BARHOSTNAME=server.xx.yy)';
5> backup incremental level 0
6> format '<SID>BAZAORACLE<<SID>_%s:%t:%p>.dbf'
7> database;
8> sql 'alter system archive log current';
9> backup
10> format '<SID>BAZAORACLE<<SID>_%s:%t:%p>.dbf'
11> archivelog all;
12> delete archivelog until time 'sysdate-1';
13> backup
14> format '<SID>BAZAORACLE<<SID>_%s:%t:%p>.dbf'
15> current controlfile;
16> }
17> EXIT
connected to target database: <SID> (DBID=3497973964)
using target database control file instead of recovery catalog
allocated channel: dev_0
channel dev_0: sid=134 devtype=SBT_TAPE
channel dev_0: Data Protector A.06.00/DPWIN_00268
released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dev_0 channel at 06/21/2007 12:00:20
ORA-19506: failed to create sequential file, name="<SID>_BAZA_ORACLE<<SID>_7:625838365:1>.dbf", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
Vendor specific error: OB2_StartObjectBackup() failed ERR(8010)
Recovery Manager complete.
[Major] From: [email protected] "<SID>" Time: 21.6.2007 12:00:20
     The database reported error while performing requested operation.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dev_0 channel at 06/21/2007 12:00:20
ORA-19506: failed to create sequential file, name="<SID>_BAZA_ORACLE<<SID>_7:625838365:1>.dbf", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
Vendor specific error: OB2_StartObjectBackup() failed ERR(8010)
Recovery Manager complete.
[Major] From: [email protected] "<SID>" Time: 21.6.2007 12:00:20
     Oracle Recovery Manager completed with errors.
[Major] From: [email protected] "<SID>" Time: 21.6.2007 12:00:20
     Backup of target database failed
*************************************************************************************

I changed the tapes and backup drive but problem is standing. Now the message is:
released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dev_0 channel at 07/04/2007 09:11:48
ORA-19506: failed to create sequential file, name="<SID>_BAZA_ORACLE<<SID>_15:627037853:1>.dbf", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
Vendor specific error: OB2_StartObjectBackup() failed ERR(8010)
Recovery Manager complete.
[Major] From: [email protected] "<SID>" Time: 4.7.2007 9:11:49
[Critical] From: [email protected] "LTO2-1_server" Time: 4.7.2007 9:12:01
IPC Cannot Allocate Shared Memory Segment
     The database reported error while performing requested operation.
[Normal] From: [email protected] "LTO2-1_server" Time: 4.7.2007 9:12:07
     scsi5:0:1:0C
     Medium header verification completed, 0 errors found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dev_0 channel at 07/04/2007 09:11:48
ORA-19506: failed to create sequential file, name="<SID>_BAZA_ORACLE<<SID>_15:627037853:1>.dbf", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
Vendor specific error: OB2_StartObjectBackup() failed ERR(8010)
Recovery Manager complete.
[Major] From: [email protected] "<SID>" Time: 4.7.2007 9:11:49
     Oracle Recovery Manager completed with errors.
[Major] From: [email protected] "<SID>" Time: 4.7.2007 9:11:49
     Backup of target database failed.
Please help me.... I don't have backup 20 days...

Similar Messages

  • Restore from OSB. RMAN-06024: no backup or copy of the control file found

    I backed up controlfile for standby on production server to OSB media:
    -bash-3.00$ rman target / catalog rman/rman@emgc
    Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: EMGC (DBID=1838014073)
    connected to recovery catalog database
    RMAN>
    RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
    RUN
    ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
    BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
    RELEASE CHANNEL ch1;
    CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
    new RMAN configuration parameters:
    CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
    new RMAN configuration parameters are successfully stored
    starting full resync of recovery catalog
    full resync complete
    RMAN> 2> 3> 4> 5> 6>
    allocated channel: ch1
    channel ch1: sid=1085 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    Starting backup at 25-JAN-11
    channel ch1: starting compressed full datafile backupset
    channel ch1: specifying datafile(s) in backupset
    including standby control file in backupset
    channel ch1: starting piece 1 at 25-JAN-11
    channel ch1: finished piece 1 at 25-JAN-11
    piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
    channel ch1: backup set complete, elapsed time: 00:00:27
    Finished backup at 25-JAN-11
    released channel: ch1
    RMAN> list backup of controlfile;
    old RMAN configuration parameters:
    CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
    RMAN configuration parameters are successfully reset to default value
    starting full resync of recovery catalog
    full resync complete
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
    BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
    Handle: 1em30ngu_1_1 Media: mf_rman-000003
    Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
    RMAN>
    On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
    -bash-3.00$ rman target / catalog rman/rman@emgc
    Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: emgc (not mounted)
    connected to recovery catalog database
    RMAN> set DBID=1838014073;
    executing command: SET DBID
    database name is "EMGC" and DBID is 1838014073
    RMAN> RUN
    ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
    crosscheck backup of controlfile;
    2> 3> 4> 5>
    allocated channel: ch1
    channel ch1: sid=1093 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
    Crosschecked 1 objects
    released channel: ch1
    RMAN> list backup of controlfile;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
    BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
    Handle: 1em30ngu_1_1 Media: mf_rman-000003
    Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
    RMAN> RUN
    ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
    RESTORE CONTROLFILE FROM TAG 'STB_CTL';
    2> 3> 4> 5>
    allocated channel: ch1
    channel ch1: sid=1093 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    Starting restore at 25-JAN-11
    released channel: ch1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 01/25/2011 15:35:20
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    RMAN> RUN
    ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
    delete noprompt backup of controlfile;
    2> 3> 4> 5>
    allocated channel: ch1
    channel ch1: sid=1093 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    List of Backup Pieces
    BP Key BS Key Pc# Cp# Status Device Type Piece Name
    1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
    deleted backup piece
    backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
    Deleted 1 objects
    released channel: ch1
    RMAN>

    You cannot specify a tag for a standby control file.
    read here
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
    Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM

  • RMAN-06023: no backup or copy of datafile 5 found to restore ??

    Hi,
    Am on
    Apps 12.0.4
    DB 10gR2
    Am trying to recover a datafile: got below error ?
    Hex dump of (file 5, block 11701) in trace file /u01/app/oracle/admin/ora10g/udump/ora10g_ora_6482.trc
    Corrupt block relative dba: 0x01402db5 (file 5, block 11701)
    Bad check value found during backing up datafile
    Data in bad block:
    type: 0 format: 2 rdba: 0x01402db5
    last change scn: 0×0000.00000000 seq: 0×1 flg: 0×05
    spare1: 0×0 spare2: 0×0 spare3: 0×0
    consistency value in tail: 0×00000001
    check value in block header: 0x8bf5
    computed block checksum: 0×2
    Reread of blocknum=11701, file=/u01/app/oracle/oradata/ora10g/example01.dbf. found same corrupt data
    RMAN> blockrecover datafile 5 block 11701;
    Starting blockrecover at 23-AUG-11
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=139 devtype=DISK
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
    RMAN-06026: some targets not found – aborting restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    i dont have a backup of this datafile
    Thanks
    Edited by: NewAppsDBA on Oct 24, 2011 6:23 AM

    RMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
    RMAN-06026: some targets not found – aborting restore
    RMAN-06023: no backup or copy of datafile 5 found to restoreSearch MOS for those errors and go through the docs.
    Thanks,
    Hussein

  • RMAN-06023: no backup or copy of datafile 3 found to restore

    Hello,
    i have searched the whole forum, but i didnt get anything.
    i have rman backupset (x64), and i am trying to restore it to another machine, (same characteristic) but i got the error below.
    help please.... :(
    RMAN> run
    2> {
    3> ALLOCATE CHANNEL C1 DEVICE TYPE DISK;
    4> RESTORE DATABASE;
    5> }
    using target database control file instead of recovery catalog
    allocated channel: C1
    channel C1: SID=170 device type=DISK
    Starting restore at 03-MAY-10
    released channel: C1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 05/03/2010 11:16:00
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN>

    Hello,
    i am using 10 g and my backup set, is that enough?
    RMAN> list backup;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    79 Full 12.85G DISK 00:26:51 12-JUN-09
    BP Key: 79 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
    1209042215
    Piece Name: F:\RMAN_BACKUP\2NKHDHB1_1_1
    List of Datafiles in backup set 79
    File LV Type Ckp SCN Ckp Time Name
    1 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
    2 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
    F
    3 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
    4 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
    5 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
    F
    7 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
    NSIONS_01.DBF
    8 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
    S_01_REORG0_REORG0.DBF
    9 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
    XES_01.DBF
    10 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
    ING_01_REORG0.DBF
    11 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
    NSIONS_01.DBF
    12 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
    S_01_REORG0_REORG0.DBF
    13 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
    XES_01.DBF
    15 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
    ING_01_REORG0.DBF
    16 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
    ING_02_REORG0.DBF
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    80 Full 7.17M DISK 00:00:04 12-JUN-09
    BP Key: 80 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
    1209042215
    Piece Name: F:\RMAN_BACKUP\2OKHDITH_1_1
    SPFILE Included: Modification time: 12-JUN-09
    Control File Included: Ckp SCN: 4254271191 Ckp time: 12-JUN-09
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    81 Full 13.29G DISK 00:33:30 22-APR-10
    BP Key: 81 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_04
    2210052403
    Piece Name: F:\RMAN_BACKUP\2PLBPCV8_1_1
    List of Datafiles in backup set 81
    File LV Type Ckp SCN Ckp Time Name
    1 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
    2 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
    F
    3 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
    4 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
    5 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
    F
    7 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
    NSIONS_01.DBF
    8 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
    S_01_REORG0_REORG0.DBF
    9 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
    XES_01.DBF
    10 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
    ING_01_REORG0.DBF
    11 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
    NSIONS_01.DBF
    12 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
    S_01_REORG0_REORG0.DBF
    13 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
    XES_01.DBF
    15 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
    ING_01_REORG0.DBF
    16 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
    ING_02_REORG0.DBF
    RMAN>

  • RMAN-06024: no backup or copy of the control file found to restore

    I am cloning a new database using a full backup from previous nightly rman backup using a standby database utilizing catalog. When I run the duplicate command, I get
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/27/2011 15:04:05
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    But the backup of controlfile does exists in the right place. What am I missing?

    958210 wrote:
    i was trying to clone a database to a remote machine, but it is giving me the following error
    'RMAN-06024: no backup or copy of the control file found to restore
    ORA-19505: failed to identify file "/u01/app/oracle/product/11.2.0/dbs/c-1617115651-20120912-02"
    even though i can list the backup of the control file in the source machine.
    thank you
    'How do I ask a question on the forums?
    SQL and PL/SQL FAQ
    Since we don't know what you did, so we can't know what you did wrong

  • Problem about RMAN-06023: no backup or copy of datafile 5 found to restore

    here is the error info when i duplicate database use rman
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/19/2011 09:33:39
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    and following my operate steps
    ==================
    auxiliary instance configure
    1, create password file
    $ orapwd file=/opt/app/oracle/product/10.2.0/db_1/dbs/orapwslavedb password=Myss123456 entries=30
    2,edit tnsname.ora on auxilary so i can connect primary db and auxiliary
    $ vi tnsname.ora (tnsping test pass)
    PRIDB =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.40.214)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = pridb)
    3,create pfile for auxiliary instance
    $ vi initslavedb.ora
    *.DB_BLOCK_SIZE=8192
    *.DB_NAME=slavedb
    *.CONTROL_FILES='/opt/app/oracle/oradata/slavedb/control01.ctl','/opt/app/oracl
    e/oradata/slavedb/control02.ctl','/opt/app/oracle/oradata/slavedb/control03.ctl'
    *.DB_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
    *.LOG_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
    4,start auxiliary instance nomount and create spfile,then shutdown it,and startup to nomount status again
    5,backup target database
    RMAN> backup database;
    6, create directory on slavedb,and transforer target backupset and archlog to salvedb
    $ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/backupset/2011_08_19
    $ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/archivelog/2011_08_19
    7,run duplicate commandline on auxiliary
    [oracle@localhost admin]$ rman target sys/Myss123456@pridb auxiliary /
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 19 10:46:05 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: PRIDB (DBID=969477968, not open)
    connected to auxiliary database: SLAVEDB (not mounted)
    RMAN> duplicate target database to 'slavedb'
    2> nofilenamecheck;
    Starting Duplicate Db at 19-AUG-2011 10:46:15
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: sid=35 devtype=DISK
    contents of Memory Script:
    set until scn 490864;
    set newname for datafile 1 to
    "/opt/app/oracle/oradata/slavedb/system01.dbf";
    set newname for datafile 2 to
    "/opt/app/oracle/oradata/slavedb/undotbs01.dbf";
    set newname for datafile 3 to
    "/opt/app/oracle/oradata/slavedb/sysaux01.dbf";
    set newname for datafile 4 to
    "/opt/app/oracle/oradata/slavedb/users01.dbf";
    set newname for datafile 5 to
    "/opt/app/oracle/oradata/slavedb/example01.dbf";
    restore
    check readonly
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 19-AUG-2011 10:46:16
    using channel ORA_AUX_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/19/2011 10:46:16
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    anyone can help?

    use format command with backup.
    eg:-
    backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T';
    if it is archivelog mode then
    backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T' plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
    then copy the backup to the auxiliary instance server.
    then try again the duplicate command.

  • Rman Recovery using backup created using dbconsole

    Thanks for taking my questions. First, I see there is another person asking about rman recovery but I am hoping mine is not identical.
    BACKGROUND
    Archiving and flashback is on.
    Database is 11g.
    Full on-line database backup is done using dbconsole (oem) and includes control, spfile and archive logs.
    RECOVERY
    I am testing my recovery to a new serve.
    I installed oracle
    Restored a backupset from one backup to the new servers flashbackup area.
    Recovered the spfile ok
    Recovered the control file ok
    Found last seq number ok
    Restore database ok
    RECOVER DATABASE UNTIL SEQUENCE - NOT OK
    Error=DATAFILE 1 MUST BE RESTORED FROM BACKUP OLDER THAN SCN
    QUESTIONS
    Where did I go wrong?
    Could it be my rman backup didn't backup all necessary archive logs?
    How do I fix this and can I fix it using dbconsole?
    Also, is it still possible to fix the test server without loading any new files?
    Thanks!
    Kathie

    Hello,
    To answer your questions, it looks like your backup is out of sync with SCN for datafiles with your Oracle 11g database.
    What you need to do is first check the low SCN and current SCN for your database to that in your RMAN backup files.
    You can check backups in RMAN command line with
    RMAN> list backup;
    using target database control file instead of recovery catalog
    List of Backup Sets
    ===================
    BS Key Size Device Type Elapsed Time Completion Time
    1 349.08M DISK 00:01:14 24-JAN-08
    BP Key: 1 Status: AVAILABLE Compressed: NO Tag: TAG20080124T180119
    Piece Name: C:\ORACLE\FLASHBACK\ORCL\BACKUPSET\2008_01_24\O1_MF_ANNNN_TA
    G20080124T180119_3SLJQOFO_.BKP
    List of Archived Logs in backup set 1
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 1 1030802 04-JAN-08 1053767 05-JAN-08
    1 2 1053767 05-JAN-08 1104812 06-JAN-08
    Then open another prompt window and SQL*PLUS session as sysdba privileged account:
    SQL> select name, current_scn from v$database;
    NAME CURRENT_SCN
    ORCL 4089528
    You need to make sure that you are trying to restore database with RMAN with a backup for the SCN numbers that are older than the current database SCN in database or Oracle will complain.
    Enterprise Manager dbconsole will work but nothing beats the power of a command line.
    Use the automated repair options for the Oracle 11g Database Repair advisors.
    1. Connect to RMAN
    rman target=/
    RMAN> list failure;
    RMAN> repair failure preview;
    RMAN> repair failure;
    For more details, Arup Nanda has a good overview of RMAN with Oracle 11g:
    http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-rman.html
    Hope this helps you out.
    -Ben
    Cheers,
    Ben Prusinski
    http://oracle-magician.blogspot.com/

  • RMAN-06023: no backup or copy of datafile

    Hi,
    on 10g R2 on AIX, I want to recover my DB at the time of 26 of march. The backup files are available but I receive :
    RMAN> Run {
    2>         SET UNTIL TIME "to_date('26-03-2011 00:00:00','DD-MM-YYYY HH24:MI:SS')";
    3>      allocate channel t1 type disk;
    4>      restore database;
    5>      recover database;
    6>      sql "alter database open";
    7> }
    8>
    executing command: SET until clause
    allocated channel: t1
    channel t1: sid=155 devtype=DISK
    Starting restore at 01-APR-11
    released channel: t1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 04/01/2011 11:13:42
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 216 found to restore
    RMAN-06023: no backup or copy of datafile 215 found to restore
    RMAN-06023: no backup or copy of datafile 214 found to restoreWhy RMAN can't find them ?
    How to verify ?
    Thank for help.

    Hi,
    Can you please make sure the restore mechanism you are following is correct or not?
    Mechanics of Restore Operations
    RMAN automates the procedure for restoring files. You do not need to go into the operating system, locate the backup that you want to use, and manually copy files into the appropriate directories. When you issue a RESTORE command, RMAN directs a server session to restore the correct backups to either:
    * The default location, overwriting the files with the same name currently there
    * A new location, which you can specify with the SET NEWNAME command
    To restore a datafile, either mount the database or keep it open and take the datafile to be restored offline. When RMAN performs a restore, it creates the restored files as datafile image copies and records them in the repository.
    refer the link for more information
    http://download.oracle.com/docs/cd/B12037_01/server.101/b10734/rcmconc2.htm
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • Backup Failure using OEM

    Backup Failure using OEM
    I have oracle 9i (windows 2000 server)
    I tried to make a fullbackup using OEM, it gives me NO error messages
    I got result file with 890 MB (my Db is not huge),
    but when I go back to the JOBs in OEM I found the status of the job FAILED
    I tried to do the same thing using incremental backup level 0, but I got the same result
    any Idea why the job didn't complete successfully
    thanx in advance

    Use command line -> rman .

  • RMAN  %N Format Backup

    Hi Gurus,
    I have rman script that backups up my 10g database. I'm trying to format the backup ser as databasename_tablespaceName_date_UniqueNo.dbf. This is my script:
    backup incremental level 1
    filesperset 1
    format '%d_%N_%T'
    keep until time "sysdate+1" logs
    (database include current controlfile);
    All datafiles complete but at the end I get this error:
    ORA-19715: invalid format N for generated name
    ORA-27302: failure occurred at: slgpn
    continuing other job steps, job failed will not be re-run
    channel ch2: starting incremental level 1 datafile backupset
    channel ch2: specifying datafile(s) in backupset
    including current SPFILE in backupset
    channel ch2: starting piece 1 at 27-AUG-09
    RMAN-03009: failure of backup command on ch2 channel at 08/27/2009 07:45:01
    ORA-19715: invalid format N for generated name
    ORA-27302: failure occurred at: slgpn
    continuing other job steps, job failed will not be re-run
    channel ch1: finished piece 1 at 27-AUG-09
    piece handle=MEDTEST_USERS_20090827 tag=TAG20090827T074351 comment=API Version 2.0,MMS Version 5.0.0.0
    channel ch1: backup set complete, elapsed time: 00:00:30
    released channel: ch1
    released channel: ch2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ch2 channel at 08/27/2009 07:45:00
    ORA-19715: invalid format N for generated name
    ORA-27302: failure occurred at: slgpn
    RMAN-03009: failure of backup command on ch2 channel at 08/27/2009 07:45:01
    ORA-19715: invalid format N for generated name
    ORA-27302: failure occurred at: slgpn
    RMAN>
    RMAN> **end-of-file**
    RMAN>
    Please help.

    I removed include current control file, I still get the same error for %N & %f:
    backup
    incremental level 1
    filesperset 1
    format '%d_%f_%N_%T_%U'
    keep until time "sysdate+1" logs
    (database);
    RMAN-03009: failure of backup command on ch2 channel at 08/27/2009 09:20:33
    ORA-19715: invalid format N for generated name
    ORA-27302: failure occurred at: slgpn
    continuing other job steps, job failed will not be re-run
    channel ch2: starting incremental level 1 datafile backupset
    channel ch2: specifying datafile(s) in backupset
    channel ch1: finished piece 1 at 27-AUG-09
    piece handle=MEDTEST_8_USERS_20090827_3sknnpe8_1_1 tag=TAG20090827T091919 comment=API Version 2.0,MMS Version 5.0.0.
    0
    channel ch1: backup set complete, elapsed time: 00:00:26
    including current SPFILE in backupset
    channel ch2: starting piece 1 at 27-AUG-09
    released channel: ch1
    released channel: ch2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ch2 channel at 08/27/2009 09:20:34
    ORA-19715: invalid format f for generated name
    ORA-27302: failure occurred at: slgpn
    RMAN>
    RMAN> **end-of-file**

  • RMAN-06023: no backup or copy of datafile 12 found to restore

    Hi
    I'm getting the above error when trying to create a duplicate database on the same server.
    Steps
    1) Create backup.
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    backup as copy
    incremental level 0
    spfile
    database
    include current controlfile;
    2) Restore / Duplicate
    Have database orcl2 which is on the same server as ORCL1. Performing a no catalog recovery.
    I get the following error.
    executing Memory Script
    executing command: SET until clause
    Starting restore at 14-MAR-11
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=555 device type=DISK
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 03/14/2011 16:02:24
    RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    All the datafiles are not found. Not sure how this is possible as I just did the backup.
    Command for Duplication :
    DUPLICATE TARGET DATABASE TO ORCL2
    DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
    SPFILE
    PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
    SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
    Additional Information
    RMAN> list backup
    2> ;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    13 Full 16.77M DISK 00:00:01 14-MAR-11
    BP Key: 13 Status: AVAILABLE Compressed: NO Tag: TAG20110314T155530
    Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACKUP\2011_03_14\O1_
    MF_S_745775730_6QWWOM7G_.BKP
    SPFILE Included: Modification time: 14-MAR-11
    SPFILE db_unique_name: ORCL1
    Control File Included: Ckp SCN: 731378 Ckp time: 14-MAR-11
    RMAN>
    Any help would be appreciated.
    Thanks.

    ORADBA , thank you for your help.
    Did as you suggested but still getting the same error
    RMAN> DUPLICATE TARGET DATABASE TO ORCL2
    2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
    3> SPFILE
    4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
    5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
    6> until scn = 666967;
    Starting Duplicate Db at 14-MAR-11
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=537 device type=DISK
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:12:47
    RMAN-06136: ORACLE error from auxiliary database: ORA-01565: error in identifyin
    g file 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    RMAN> exit
    Recovery Manager complete.
    C:\Documents and Settings\Administrator>rman target sys/mariorun@orcl1 nocatalog
    Recovery Manager: Release 11.1.0.7.0 - Production on Mon Mar 14 18:13:20 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: ORCL1 (DBID=1129792691)
    using target database control file instead of recovery catalog
    RMAN> connect auxiliary sys/mariorun@orcl2
    connected to auxiliary database: ORCL2 (not mounted)
    RMAN>
    RMAN> DUPLICATE TARGET DATABASE TO ORCL2
    2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
    3> SPFILE
    4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
    5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
    6> until scn = 666967;
    Starting Duplicate Db at 14-MAR-11
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=97 device type=DISK
    contents of Memory Script:
    set until scn 666967;
    restore clone spfile to 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA';
    sql clone "alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFIL
    EORCL2.ORA''";
    executing Memory Script
    executing command: SET until clause
    Starting restore at 14-MAR-11
    using channel ORA_AUX_DISK_1
    WARNING: A restore time was estimated based on the supplied UNTIL SCN
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring SPFILE
    output file name=C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA
    channel ORA_AUX_DISK_1: reading from backup piece D:\ORACLE\FAST_RECOVERY_AREA\O
    RCL1\AUTOBACKUP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP
    channel ORA_AUX_DISK_1: piece handle=D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACK
    UP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP tag=TAG20110314T155530
    channel ORA_AUX_DISK_1: restored backup piece 1
    channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
    Finished restore at 14-MAR-11
    sql statement: alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFI
    LEORCL2.ORA''
    contents of Memory Script:
    sql clone "alter system set db_name =
    ''ORCL2'' comment=
    ''duplicate'' scope=spfile";
    sql clone "alter system set audit_file_dest =
    ''c:\oracle\ora11g\admin\orcl2\adump'' comment=
    '''' scope=spfile";
    sql clone "alter system set control_files =
    ''c:\oracle\ora11g\oradata\orcl2\control01.ctl'', ''c:\oracle\ora11g\oradata\or
    cl2\control02.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control03.ctl'' comment=
    '''' scope=spfile";
    sql clone "alter system set LOG_FILE_NAME_CONVERT =
    ''\orcl1'', ''\orcl2'' comment=
    '''' scope=spfile";
    shutdown clone immediate;
    startup clone nomount ;
    executing Memory Script
    sql statement: alter system set db_name = ''ORCL2'' comment= ''duplicate'' sco
    pe=spfile
    sql statement: alter system set audit_file_dest = ''c:\oracle\ora11g\admin\orc
    l2\adump'' comment= '''' scope=spfile
    sql statement: alter system set control_files = ''c:\oracle\ora11g\oradata\orc
    l2\control01.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control02.ctl'', ''c:\oracl
    e\ora11g\oradata\orcl2\control03.ctl'' comment= '''' scope=spfile
    sql statement: alter system set LOG_FILE_NAME_CONVERT = ''\orcl1'', ''\orcl2''
    comment= '''' scope=spfile
    Oracle instance shut down
    connected to auxiliary database (not started)
    Oracle instance started
    Total System Global Area 267825152 bytes
    Fixed Size 1346712 bytes
    Variable Size 100664168 bytes
    Database Buffers 163577856 bytes
    Redo Buffers 2236416 bytes
    contents of Memory Script:
    set until scn 666967;
    set newname for datafile 1 to
    "D:\ORACLE\ORADATA\ORCL2\SYSTEM01.DBF";
    set newname for datafile 2 to
    "D:\ORACLE\ORADATA\ORCL2\SYSAUX01.DBF";
    set newname for datafile 3 to
    "D:\ORACLE\ORADATA\ORCL2\UNDOTBS01.DBF";
    set newname for datafile 4 to
    "D:\ORACLE\ORADATA\ORCL2\IM_DATA_01.DAT";
    set newname for datafile 5 to
    "D:\ORACLE\ORADATA\ORCL2\IM_IDX_01.DAT";
    set newname for datafile 6 to
    "D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_01.DAT";
    set newname for datafile 7 to
    "D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_02.DAT";
    set newname for datafile 8 to
    "D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_01.DAT";
    set newname for datafile 9 to
    "D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_02.DAT";
    set newname for datafile 10 to
    "D:\ORACLE\ORADATA\ORCL2\IM_PROC_LOG_01.DAT";
    set newname for datafile 11 to
    "D:\ORACLE\ORADATA\ORCL2\IM_PROC_NOLOG_01.DAT";
    set newname for datafile 12 to
    "D:\ORACLE\ORADATA\ORCL2\USERS01.DBF";
    restore
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 14-MAR-11
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=555 device type=DISK
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:13:59
    RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    Any suggestions are appreciated.

  • PC Suite 6.86.9.0 Backup Failure

    PC Suite 6.86.9.0 Backup Failure
    When backing up the messages on my N80(firmware v5.0719.0.2) the backup always fails when processing multimedia messages and windows reports "Windows Driver Foundation - User-mode Driver Framework Host Process" (WUDFHost.exe) has failed. All other parts of the backup work successfully.
    What version of Windows is being used? Vista
    What Service Pack is installed? SP1
    What version of PC Suite is installed? 6.86.9.0
    What is the connection method, cable, bluetooth or IR? usb cable
    Does anyone know how to correct this issue ?

    13-Apr-2008 12:16 PM
    chris9 wrote:
    PC Suite 6.86.9.0 Backup Failure
    When backing up the messages on my N80(firmware v5.0719.0.2) the backup always fails when processing multimedia messages and windows reports "Windows Driver Foundation - User-mode Driver Framework Host Process" (WUDFHost.exe) has failed. All other parts of the backup work successfully.
    What version of Windows is being used? Vista
    What Service Pack is installed? SP1
    What version of PC Suite is installed? 6.86.9.0
    What is the connection method, cable, bluetooth or IR? usb cable
    Does anyone know how to correct this issue ?
    plz can u post the Screenshot of error?
    i m not having this type of problem, Backup is working Fine for Me.
    Nokia 5530 Xpress Music RM-504
    v30.0.009
    31-5-10

  • If I need a full rman restore which backups will it use?

    Hello,
    I have a database 11.1.0.7 with 8TB. Block change tracking is enabled.
    At the weekend I take level 0 backup and during the week level 1 cumulative.
    For some weeks the level 0 backup is failing, so I only have level 1 cumulative backups taken every week day with a 4 weeks old level 0 backup.
    If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
    I ask this because grid crontrol tells me that the recent level 1 backups input size is smaller than last week level 1 backups and in between I dont have any level 0 sucessfull backups. Shouldn't the input size of level 1 cumulative increase until the next level 0 backup ?
    The grid reports:
    Backup Name Status Start Time Time Taken Type Output Devices Input Size Output Size Output Rate (Per Sec)
    rman_df_lv1c COMPLETED 25/Jul/2011 21H00m WEST 02:33:29 DB INCR SBT_TAPE *1.32T* 289.02G 32.14M
    rman_df_lv0 FAILED 23/Jul/2011 02H01m WEST DB INCR SBT_TAPE 8.78T 8.06T
    rman_df_lv1c COMPLETED 21/Jul/2011 21H00m WEST 04:39:38 DB INCR SBT_TAPE *3.46T* 550.82G 33.62M
    rman_df_lv1c COMPLETED 20/Jul/2011 21H00m WEST 04:47:36 DB INCR SBT_TAPE *3.37T* 524.36G 31.12M
    rman_df_lv1c COMPLETED 19/Jul/2011 21H00m WEST 04:06:09 DB INCR SBT_TAPE *3.15T* 490.75G 34.03M
    rman_df_lv1c COMPLETED 18/Jul/2011 21H00m WEST 03:40:24 DB INCR SBT_TAPE *2.49T* 410.88G 31.82M
    rman_df_lv0 FAILED 16/Jul/2011 22H16m WEST DB INCR SBT_TAPE 6.27T 5.69T
    rman_df_lv1c FAILED 14/Jul/2011 21H00m WEST 06:13:40 DB INCR SBT_TAPE 4.38T 714.30G 32.62M
    rman_df_lv1c FAILED 13/Jul/2011 21H01m WEST 04:40:45 DB INCR SBT_TAPE 3.25T 542.98G 33.01M
    rman_df_lv1c COMPLETED 12/Jul/2011 21H00m WEST 07:15:54 DB INCR SBT_TAPE 4.74T 847.93G 33.20M
    rman_df_lv1c COMPLETED 11/Jul/2011 21H00m WEST 07:26:40 DB INCR SBT_TAPE 3.78T 766.40G 29.28M
    rman_df_lv0 FAILED 9/Jul/2011 02H32m WEST 04:30:44 DB INCR SBT_TAPE 749.89G 716.02G 45.14M
    rman_df_lv1c FAILED 7/Jul/2011 21H01m WEST 04:49:24 DB INCR SBT_TAPE 2.16T 515.90G 30.42M
    rman_df_lv1c FAILED 6/Jul/2011 21H00m WEST 01:26:06 DB INCR SBT_TAPE 745.83G 165.48G 32.80M
    rman_df_lv1c FAILED 5/Jul/2011 21H01m WEST 00:05:48 DB INCR SBT_TAPE 58.56G 7.56G 22.24M
    rman_df_lv1c FAILED 4/Jul/2011 21H00m WEST 01:55:03 DB INCR SBT_TAPE 422.40G 79.55G 11.80M
    rman_df_lv0 FAILED 3/Jul/2011 16H32m WEST 30:22:04 DB INCR SBT_TAPE 4.53T 4.21T 40.40M

    >
    If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
    From http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmvalid.htm
    Validating Backups Before Restoring Them
    You can run RESTORE ... VALIDATE to test whether RMAN can restore a specific file or set of files from a backup. RMAN chooses which backups to use.
    The database must be mounted or open for this command. You do not have to take datafiles offline when validating the restore of datafiles, because validation of backups of the datafiles only reads the backups and does not affect the production datafiles.
    When validating files on disk or tape, RMAN reads all blocks in the backup piece or image copy. RMAN also validates offsite backups. The validation is identical to a real restore operation except that RMAN does not write output files.
    You can monitor what RESTORE VALIDATE does.
    Make precautions, so you do not damage the production DB!!!
    Iordan Iotzov
    http://iiotzov.wordpress.com/

  • Time Machine backup failure on case-sensitive disk?

    Hello,
    I just started getting a Time Machine backup failure error that says "A disk you are backing up is case-sensitive, but the backup disk is not."
    None of my external disks have changed and I've not added any new ones.
    The error seems to be stemming from the fact that I'm logged in as multiple users on my system, all with MobileMe accounts. When I "get info" on all mounted disks, the only ones that are reporting "Mac OS Extended (Case-sensitive, Journaled)" are the mounted iDisks from the other use accounts that I'm currently logged in as.
    Does this mean I cannot use Time Machine while logged in as multiple users, all with the iDisks mounted? That would be a major annoyance to either have to log out/log in to each user as I need them or to disable iDisk syncing in my MobileMe prefs.
    Regards,
    Terry

    That seems odd to me; my iDisk shows WebDAV as the format and doesn't interfere with backups, but I don't have any other users' iDisks, either.
    Another possibility would be to reformat your TM drive as case-sensitive. That would, of course, erase all your backups so TM would start over from scratch, and some possible troubles when restoring (see the pink box in #5 of the Frequently Asked Questions *User Tip,* also at the top of this forum, for details); but you'd no longer have the backup problem.

  • RMAN report need backup

    We have an incremental level-1 backup Mon-Sat and cold full backup on Sundays with retention policy of 7 days. While troubleshooting some backup issues (space issue, expired backups) I ran the following commands and trying to understand the output.
    RMAN> report need backup database;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 7 days
    Report of files whose recovery needs more than 7 days of archived logs
    File Days Name
    100 146 /orahprdidx/hprd/psindex05.dbf
    RMAN> report unrecoverable;
    Report of files that need backup due to unrecoverable operations
    File Type of Backup Required Name
    RMAN> report need backup days = 7 database;
    Report of files whose recovery needs more than 7 days of archived logs
    File Days Name
    100 146 /orahprdidx/hprd/psindex05.dbf
    RMAN> report obsolete recovery window of 7 days;
    no obsolete backups found
    RMAN>
    I looks like I need 146 days worth of archive log files to recover the psindex05.dbf. If so, what I could do to bring that into the 7 days policy?
    The database is fine, I am not trying to recover the database.
    This was setup by someone and now I am taking over with minimum RMAN experience.
    I appreciate any help in this subject.

    The datafile was offline. I guess it was created my mistake and hanging in there. Once I do the cleanup it should go away.

Maybe you are looking for

  • System-copy failed

    hi gurus,   I'm trying to make a system copy from WIN2000/ORA817 to WIN2003/ORA10g FOR R/3 4.6C SR2.   During the system-copy, I change the SCHEMA-ID from SR3 to DEV, and now it's in new tablespace layout, which means there're no PSAPDDICD/PSAPDDICI

  • New Retina MacBook Pro does not find WiFi after booting

    My Retina MacBook Pro keeps looking for WiFis after it has booted, but does not find any. I have to explicitly turn WiFi off and on again after booting to get it working. When I put the MacBook to sleep and wake it, the problem does not occur. Any hi

  • Connecting MBP w/Retina and Work Laptop with Switch to dual monitors

    I have the latest MBP w/retina display and NVidia GT750M video card.  I also have my work laptop (Dell, Win 7, HDMI out). I want to connect these to a dual monitor setup with a switch.  I currently only have one monitor that is 1920 x 1080 and suppor

  • Capturing from firewire to new macbook pro in FCS 7.0.3

    I'm thinking about buying a new macbook pro but it doesn't have a firewire input and my camera (Sony HC9) uses that for output.  Can I log and capture to FCP 7.0.3 through a firewire adapter or through the HDMI input on the computer.  thanks. Steve

  • "Itunes cannot connect to the internet" message is doing my nut

    When I try and update 3GS, i get an error message claiming that Itunes cannot contact the Iphone software update server because there is no internet connection. Rubbish. I'm talking to you via internet arent I. Have tried altering LAN settings. Any h