Rman : 'failure during compilaton of command'

Hello friends,
I am new to Rman backup.
However, I attempted one for the first time, with a script file 'full_backup.sh'. I am having oracle 8i in Unix server.
Rman did run and some files have been created in the backup directory. But towards the end, there was this message.
RMAN-03022 : compiling command : backup
RMAN-03026 : error recovery releasing channel resources
RMAN- 08031 : released channel : c1
RMAN- 08031 : released channel : c2
RMAN- 08031 : released channel : c3
ERROR MESSAGE STACK FOLLOWS
RMAN - 03002 : failure during compilation of command
RMAN - 03013 : command type : backup
RMAN - 06089 : archival log /home2/oracle/arch/arch_1_14932.arc not found or out of sync with catalog.
I would like to know
1. whether I have successfully completed backup using the RMAN script
2. What is the significance of the above message.
3. Of course, I have deleted some archive log files, of which the last one could be /arch_1_14932.arc, before ever running RMAN.
please help,
regards,
thomaskprakash

Hi,
can you paste the content of the script on the board? well here i am not in a position to comment on anything.for a instance i guess that you have some archivelog missingm,and this is the reason the rman came up with these texts.
thanks
Alok

Similar Messages

RMAN-11003: failure during parse/execution of SQL statement: alter session

without doing any changes I have started getting the following error in the RMAN logs.
i didnt any changes related to sort_area_size but getting the error below
plz help guys
RMAN logs
=====================
connected to recovery catalog database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of allocate command at 12/03/2007 22:00:01
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 12/03/2007 22:00:01
RMAN-11003: failure during parse/execution of SQL statement: alter session set sort_area_size=10485760
ORA-00068: invalid value 10485760 for parameter sort_area_size, must be between 0 and 1

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

RMAN-03002: failure of Duplicate Db command at 06/01/2013 16:47:33

sql statement: alter system reset db_unique_name scope=spfile
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/01/2013 16:47:33
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 8064 and starting SCN of 13048058320848 found to restore
i am trying to duplicate a database, at the end it is getting finished with this error.
can any one help me fixing this one?

It is preferable to set an UNTIL point (to the latest available archivelog) when doing a DUPLICATE. Else, Oracle attempts a complete recovery and fails after the last archivelog it finds.
Hemant K Chitale

Failure of Duplicate Db command 11g R2

I have a RAC production(prod) database (11G R2) and created Auxiliary(cscp) database on different server and both have same Solaris 10 platforms. I cannot clone the database using “UNTIL TIME”. I do followings but get error. I would appreciate your help. I am running command from Auxiliary. Should I run RMAN from Prod server?
In Aux Server:
1-     Moved password file
2-     Created init.ora and has following value
DB_NAME='cscp'
3-     startup nomount pfile='/apps/oracle/ora112/dbs/init.ora';
in prod Server:
1-     connect target sys/pw@prod
2-     connect auxiliary sys/pw@cscp;
3-     connect catalog rman/pw@prod;
4-     RUN {
SET NEWNAME FOR DATABASE TO "/apps/oracle/ora112/oradata/%U";
DUPLICATE TARGET DATABASE TO CSCP pfile=/apps/oracle/ora112/dbs/init.ora
SPFILE
NOFILENAMECHECK
UNTIL TIME "to_date('08-09-2010 13:03:14','dd-mm-yyyy hh24:mi:ss')"
LOGFILE
GROUP 1 ('/apps/oracle/ora112/redo01a.log') SIZE 50M REUSE,
GROUP 2 ('/apps/oracle/ora112/redo02a.log') SIZE 50M REUSE;
Here is the output:
executing command: SET NEWNAME
Starting Duplicate Db at 30-SEP-10
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=5 device type=DISK
contents of Memory Script:
set until scn 3958980184;
restore clone spfile to '/apps/oracle/ora112/dbs/spfilecscp.ora';
sql clone "alter system set spfile= ''/apps/oracle/ora112/dbs/spfilecscp.ora''";
executing Memory Script
executing command: SET until clause
Starting restore at 30-SEP-10
using channel ORA_AUX_DISK_1
WARNING: A restore time was estimated based on the supplied UNTIL SCN
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring SPFILE
output file name=/apps/oracle/ora112/dbs/spfilecscp.ora
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/30/2010 09:16:24
RMAN-03015: error occurred in stored script Memory Script
ORA-03113: end-of-file on communication channel

Hi Maxym,
I used following command and to verify backup files then copy them to other server. I get error. Do you have any suggestions what I get Controllfile is not found?
RMAN> restore database preview until time "to_date('01-10-2010 22:26:30','dd-mm-yyyy hh24:mi:ss')";
When I run Duplicate database command, there was following error generated by the RMAN:
executing command: SET NEWNAME
Starting Duplicate Db at 04-OCT-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/04/2010 13:54:55
RMAN-05575: CONTROLFILE backup created before to_date('01-10-2010 22:26:30','dd-mm-yyyy hh24:mi:ss') not found in /mnt
After that, I run following command and copied the control file to other server and run duplicate command but still I get same error from rman.
RMAN> restore controlfile preview until time "to_date('01-10-2010 22:26:30','dd-mm-yyyy hh24:mi:ss')";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
7350 Full 18.92M DISK 00:00:03 01-OCT-10
BP Key: 7360 Status: AVAILABLE Compressed: NO Tag: TAG20101001T011209
Piece Name: +DATA/cs01/autobackup/2010_10_01/s_731207529.613.731207531
Control File Included: Ckp SCN: 3981788360 Ckp time: 01-OCT-10

RMAN failure for "archive-log ... not found in controlfile"

Recovery Manager: Release 8.1.6.0.0 - Production
RMAN> connect target sys/XXXX@cldb;
2> connect catalog rman/XXXX@rmandb1;
3>
4> resync catalog;
5>
6> # Backup the database
7> run {
8> allocate channel ch1 type disk;
9> backup incremental level 0 format
10> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_%t_%s_%p' database;
11> sql 'alter system archive log current';
12> }
13>
14> # Backup the archived redo logs
15> run {
16> allocate channel ch1 type disk;
17>
18> backup incremental level 0 format
19> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_%t_%s_%p' archivelog all;
20> sql 'alter system archive log current';
21> }
22>
23> # Backup the control file
24> run {
25> allocate channel ch1 type disk;
26> sql 'alter database backup controlfile to trace';
27> copy current controlfile to
28> '/tools/cm/clearquest/orabackup/cldb.cqdbserver/controlfile.bak';
29> }
30>
31>
RMAN-06005: connected to target database: CLDB (DBID=1292102281)
RMAN-06008: connected to recovery catalog database
RMAN-03022: compiling command: resync
RMAN-03023: executing command: resync
RMAN-08002: starting full resync of recovery catalog
RMAN-08004: full resync complete
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03023: executing command: backup
RMAN-08008: channel ch1: starting incremental level 0 datafile backupset
RMAN-08502: set_count=816 set_stamp=422358010 creation_time=22-FEB-01
RMAN-08010: channel ch1: specifying datafile(s) in backupset
RMAN-08522: input datafile fno=00001 name=/opt/orabase/oradata/cldb/system01.dbf
---snip----
more like this
---snip----
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/backup_422358010_816_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:01:46
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter system archive log current
RMAN-03023: executing command: sql
RMAN-08031: released channel: ch1
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: ch1
RMAN-08500: channel ch1: sid=17 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-03025: performing implicit partial resync of recovery catalog
RMAN-03023: executing command: partial resync
RMAN-08003: starting partial resync of recovery catalog
RMAN-08005: partial resync complete
RMAN-03023: executing command: backup
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=817 set_stamp=422358179 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
RMAN-08504: input archivelog thread=1 sequence=85 recid=2610 stamp=422352397
RMAN-08504: input archivelog thread=1 sequence=86 recid=2611 stamp=422352397
----snip----
more similar stuff here
----snip----
RMAN-08504: input archivelog thread=1 sequence=140 recid=2732 stamp=422358121
RMAN-08013: channel ch1: piece 1 created
RMAN-08503: piece handle=/tools/cm/clearquest/orabackup/cldb.cqdbserver/backup/archivelog_422358179_817_1 comment=NONE
RMAN-08525: backup set complete, elapsed time: 00:00:17
RMAN-08009: channel ch1: starting archivelog backupset
RMAN-08502: set_count=818 set_stamp=422358197 creation_time=22-FEB-01
RMAN-08014: channel ch1: specifying archivelog(s) in backup set
----snip----
more like this
----snip----
RMAN-08504: input archivelog thread=1 sequence=164 recid=2756 stamp=422358123
RMAN-08504: input archivelog thread=1 sequence=165 recid=2757 stamp=422358123
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAG E STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03006: non-retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19571: archived-log recid 2011 stamp 419161314 not found in controlfile
RMAN-10031: ORA-19571 occurred during call to DBMS_BACKUP_RESTORE.BACKUPARCHIVEDLOG
I added the resync catalog command to the backup. But I am still getting this error. What is happening? I have the control_file_record_keep_time = 14 in the paramater file. Do I need to change this to something greater?
null

The error message is pointing to an inconsistency between what RMAN "thinks"
should be there and what is in control files.
There are a few things you can try to do
1. Compare V$LOG, V$LOGFILE, etc. Some of these views are based on control files
2. Shutdown and restart the instance.
This may help in synchronizing control files
with internal structures.
3. Trace RMAN session using oradebug and even 10046 to find out what it is doing
4. Dump entire controlfile to trace using
alter session set events 'immediate trace name controlf level 10';
Or dump loghist only
alter session set events 'immediate trace name loghist level 4';
This will dump 2**level entries.
5. Re-create controlfiles with CREATE CONTROLFILE
Regards,
Sev

Java.sql.SQLException: Communication failure during handshake.

I'm troubled by this problem followed:
the exception is decripted as:
java.sql.SQLException: Communication failure during handshake. Message from server: "Unknown database 'cust'"
I'm using JSP to access the MYSQL database. the database server has three databases:mysql,test,customer. my OS is win98. I can access the customer using "mysql -u root -p customer" in the command prompt.
but when I runs the JSP, the error appears.
the connection string is :
private String protocol = "jdbc:mysql://localhost/customer?user=customer_f&password=151276&useUnicode=true&characterEncoding=8859_1";
if the connection string is :
private String protocol = "jdbc:mysql://localhost/test?user=customer_f&password=151276&useUnicode=true&characterEncoding=8859_1";
or
private String protocol = "jdbc:mysql://localhost/mysql?user=customer_f&password=151276&useUnicode=true&characterEncoding=8859_1";
there's no problem.
what is wrong ?
I guess it's wrong with mysql's setting.
please help me,lots of thks.

It seems user root is the owner of 'customer' database. Can you use root to access 'customer' from JSP code?
Another hint:
Do you grant user customer_f privileges to 'customer' database when create 'customer'?
with root access from mysql> prompt:
mysql>grant all privileges on customer.* to customer_f@"localhost" identified by '151276';
Then, user customer_f will have all privileges to access 'customer' either from prompt or JSP page.
about Creating Users and Setting permission in MySQL
see http://www.devarticles.com/content.php?articleId=134

432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission

I am having an issue where emails to specific users internal to internal are being successfully delivered, but [a duplicate is?] also getting stuck in the "SMTP Delivery to mailbox" queue, with the sender getting a "Delivery is delayed to
these recipients or groups:" "Remote Server returned '400 4.4.7 Message delayed" This only happens with emails to specific people in the organization, they get the email immediately after being sent, and everyone else works fine. This issue
started after we migrated the users mailboxs from Exchange 2007 to Exchange 2013 CU5, we did not notice the issue until we finished moving all user mailboxes to 2013.
Delivery Report of email to affected user:
Delivered
6/30/2014 11:20 AM mail.domain.com
The message was successfully delivered.
Pending
6/30/2014 11:20 AM
The message has been queued on server 'mail.domain.com' since 6/30/2014 11:20:15 AM (UTC-06:00) Central Time (US & Canada). The last attempt to send the message was at 6/30/2014 11:21:09 AM (UTC-06:00) Central Time (US & Canada) and generated the error
'[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}]'.
-Strange time stamp
Original message headers:
Received: from mail.domain.com (172.22.220.68) by
mail.domain.com (172.22.220.68) with Microsoft SMTP Server (TLS)
id 15.0.913.22; Sun, 29 Jun 2014 21:36:34 -0500
Received: from mail.domain.com ([fe80::1554:6e6f:4ca5:85be]) by
mail.domain.com ([fe80::1554:6e6f:4ca5:85be%12]) with mapi id
15.00.0913.011; Sun, 29 Jun 2014 21:36:34 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: T S <[email protected]>
To: M M <[email protected]>
CC: D M <[email protected]>
Subject: FW: Migration Complete
Thread-Topic: Migration Complete
Thread-Index: Ac+UAzn/W6u8OF7qRG2V93cDeqU24wACDqXL
Date: Sun, 29 Jun 2014 21:36:33 -0500
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Originating-IP: [71.170.174.74]
Return-Path: [email protected]
Update 7/2/14:
Checked event viewer, and found that event ID 1051, erroring multiple times per second with message:
"Agent 'Mailbox Rules Agent' caused an unhandled exception 'StoreDriverAgentTransientException: Store Driver Agent was unable to send email.' while handling event 'OnDeliveredMessage'"
Ran Test-MailFlow on my mailbox, and the two know non-working mailboxes, For me it returned as successful, but showed as a Failure on the two other accounts.
The test emails were actually delivered to the user mailboxes even though it shows as a Failure with the Test-MailFlow command:
From Exchange Queue viewer you can see the test emails stuck in retry, with the following information:
Identity: mail\3112\1395864371267
Subject: Test-Mailflow 8f33ae76-fdd9-4528-8e73-5b9f2481a333 66c7004a-6860-44b2-983a-327aa3c9cfec
Internet Message ID: <[email protected]>
From Address: SystemMailbox{658b82cc-efc2-4407-8c92-8303213c63e2}@domain.com
Status: Retry
Size (KB): 8
Message Source Name: SMTP:Default mail
Source IP: 172.22.220.68
SCL: 0
Date Received: 7/1/2014 9:52:12 PM
Expiration Time: 7/3/2014 9:52:12 PM
Last Error: 432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
Queue ID: mail\3112
Recipients: [email protected];3;3;[{LRT=};{LED=432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]};{FQDN=};{IP=}];0;CN=Mailbox Database 2111459242,CN=Databases,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=LCS,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=com;0

Hi S Calkin,
According to the error messages, I find following information for your reference:
1. About Event ID 1051
This warning event indicates that the transport agent referenced in the event description has encountered an unhandled exception while handing the event.
More details in the following article:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Exchange&ProdVer=8.0&EvtID=1051&EvtSrc=MSExchange+Extensibility
2. About "432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]"
I suggest double check whether you have enough space. I find a similar case that caused by the low space, please see this:
432 4.2.0 STOREDRV.Deliver; Agent transient failure during message resubmission[Agent: Mailbox Rules Agent]
http://social.technet.microsoft.com/Forums/exchange/en-US/750d89fb-1832-4aaf-b095-c2b9defec977/432-420-storedrvdeliver-agent-transient-failure-during-message-resubmissionagent-mailbox-rules?forum=exchangesvrgeneral
Thanks
Mavis
Mavis Huang
TechNet Community Support

CTC v5.0 - Error: Failure during IOR Repository Initilization

I am currently running the following:
Win 2000 Pro
IE 6.0
Java 1.4.2_08-b03
When I start the CTC initilization after the .jre files have downloaded I get the following error message: Error: Failure during IOR Repository Initilization
I have uninstalled all previous versions of Java on the machine and am only running 1.4.2.
I have also deleted the CTC Cache, cookies and offline files before I run CTC.
I have been using CTC for the past 4 years with various versions of CTC software and have yet to get this message.
Any help would be greatly appreciated,
Jon

Jon,
Possible Cause: The CTC cache file might be corrupted or might need to be replaced.
1. Delete any and all Java that you having running at this time.
2. Delete the CTC Cache File Manually
To delete the JAR files manually, from the Windows Start menu choose Search > For Files or Folders.
Enter ctc*.jar or cms*.jar in the Search for files or folders named field in the Search Results dialog box and click Search Now.
Click the Modified column in the Search Results dialog box to find the JAR files that match the date when you downloaded the files from the TCC2/TCC2P.
Highlight the files and press the keyboard Delete key.
Click Yes in the Confirm dialog box.
3. Reload Java. You should load 1.4.2_03
http://java.sun.com/products/archive/j2se/1.4.2_03/index.html
4. Use a standard ping command to verify the TCP/IP connection between the PC and the ONS 15454 TCC2/TCC2P card
If the workstation has connectivity to the ONS 15454, the ping is successful and displays a reply from the IP address. If the workstation does not have connectivity, a "Request timed out" message appears.
If the ping is successful, an active TCP/IP connection exists. Restart CTC.
If the ping is not successful, and the workstation connects to the ONS 15454 through a LAN, check that the workstation's IP address is on the same subnet as the ONS node.
If the ping is not successful and the workstation connects directly to the ONS 15454, check that the link light on the workstation's NIC is illuminated.
5. The last thing I would try is pulling one of the TCC cards and then try to login.
Ian W. Miller
CSE, Optical TAC
469 255-4432

System failure during locking GL account 5555 by 13113910 Message no. 8I076 and the time of saving out going excise invoice.

Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
Shashi

Dear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

System Failure during locking GL Account 13113910 - Cenvat Suspense Account

Dear All,
While creating Excise Invoice ( in India) using J1IIN, system is giving error " System Failure during locking GL Account 13113910 " The error message No. is 8i076.
System is not allowing to create Excise Invoice.
Can anybody help me how to overcome this problem?
Thanks & regards,
Govind

<a href="https://service.sap.com/sap/support/notes/867529">Apply SAP note 867529</a>

Error in BPM: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC

hello experts
i am receiving the above error incase of BPM scenario where i am having a Transform step and synchronous RFC step.
i referred to the few threads discussing such problems and was trying to find whether my mapping is correct and i tested my mappings using my payload which looks good.
When looked into the Mapping trace of the BPM "Show container" i found error ""COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection" and it seems that when BPM is attempting to call interface mapping it is throwing this error.
Thanks in advance.
Regards
rajeev

hi,
I think no problen with the mapping part,
jco connection requird when xi try to stablish the connection with the adapter .
please look the link provided.
Setup and test SAP Java Connector outbound connection
please also check the following parameter at the exchange profile
com.sap.aii.rwb.server.centralmonitoring.r3.ashost
com.sap.aii.rwb.server.centralmonitoring.r3.client
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
com.sap.aii.rwb.server.centralmonitoring.httpport
these parameter must be given properly.
if every thing is ok than and problem still exist than try to restart the system.
for us after restarting its worked fine.
regards,
navneet

Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.

Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

System failure during call of function module RSWR_RFC_SERVICE_TEST in BW

Hello All,
            I am doing configuration with BW and EP portal when we run the program (RSPOR_SETUP) in step - 12 Maintain User Assignment in Portal = (System failure during call of function module RSWR_RFC_SERVICE_TEST) giving this error SSO is working fine.
RFC connection is working fine with BW and portal
When i execute the FM - RSWR_RFC_SERVICE_TEST it is giving error (SYSTEM_FAILURE) and in Portal side log file it is giving below error.
dev_jrfc.trc
Exception thrown [Fri Sep 05 15:14:57,928]:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host (Hostname), ProgId=EPP_PORTAL_SID: Object not found in lookup of RSWR_RFC_SERVICE_TEST.
        at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:138)
        at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please help me find the solution.
Thanks
Gurpal

Hi Gurpal,
Please go through the below SAP notes
878455
- Information broadcasting: No portal user exists
814083
- Inf. broadcasting: Changed RFC settings as of NW 04 SP11
1135947 - Bean not found
Hope this solves your problem.
Regards,
Prithviraj.

Rman : 'failure during compilaton of command'

Similar Messages

Maybe you are looking for