RMAN new Setup Fails 11g ERRor Creating Control Backup file

Rman> rman catalog=rman/****@rman.respecti.inc target=sys/*****@rac1_serv.respecti.com
Recovery Manager: Release 11.1.0.6.0 - Production on Sat Apr 4 23:29:04 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: RAC (DBID=2269761839)
connected to recovery catalog database
RMAN> create catalog tablespace rmantbs;
recovery catalog created
RMAN> register database;
database registered in recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
RMAN>
I've dropped the catalog and re-created it and continue to encounter this issue.
File '/u02/oradata/RMAN/snap_proactive.f' does not exist though the directory exist and is writable.
No luck with Metalink.
Appreciate recommendations on resolving this issue. Thanks

From RMAN Server (dgrac.respecti.inc)
RMAN> configure snapshot controlfile name to '/san/shared_data/RMAN/snap_proactive.f';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 04/05/2009 19:07:20
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 04/05/2009 19:07:20
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
RMAN> resync catalog;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of resync command on default channel at 04/05/2009 19:07:32
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
From RAC1 node
RAC1> pwd
/san/shared_data
RAC1> ls -lt
total 20
drwxr-xr-x 2 rac dba 4096 Apr 5 18:41 RMAN
drwxr-xr-x 2 rac dba 12288 Apr 5 15:42 ARC
drwxr-xr-x 3 rac dba 4096 Mar 19 19:09 RAC
RAC1>

Similar Messages

Error creating CONTROL FILE

I have a problem while installing 9iAS R2 on RH LInux 8.
When database configuration assistant starts during the installation of 9iAS infrastructure, it gives an error "Error creating CONTROL FILE" followed by many other errors.
Please help me out.
Zulqarnain

I had the same problem, but with RH9
To fix, I ran orapwd from the $ORACLE_HOME/bin directory to create a password file called orapw. Then I moved this file to the directory where the configuration assistant complains it cannot find the file. Fixed. Obviously, just ignore the errors from the configuration assistant about the CONTROL FILE until it tells you the location of the file it is looking for.

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation". Anyone know how to fix this?

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

HELP!!!! PLEASE!!!!!

7.7 upgrade: Error: There was an error creating a temporary file

*I get the following error when trying to upgrade to 7.7*
+"There was an error creating a temporary file that is needed to complete this installation"+
*When I got to launch iTunes ver 7.6.1.9 I get the following message*
+"The registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes. iTunes was not properly installed. If you want iTunes to retrieve CD information from the internet, you need to reinstall iTunes"+
The problem I have is I cannot uninstall iTunes using ADD/Remove Programs nor can I upgrade.
Anyone have any suggestions?
BTW, when I launch iTunes it works but I have not hooked my iPOD up yet for fear it will erase.
Thanks!
Message was edited by: Slattern

Ensure antivirus is disabled. McAfee interfered with my iTunes installer resulting in this error. When I temporarily disabled McAfee, the installer completed successfully.

After Effects error: Creating a resource file

Hi everyone
I'm administrating a machine with several users mainly using After Effects. The machine runs on Windows 7 64 bit.
I recently had to install videocopilots Optical Flares. Everything runs fine on my admin account but if i open AE on a user account i get an error message while on the loading screen. It says:
After Effects error: Creating a resource file "c:insert path to OpticalFlares.aex here" (might be a bit different in english as i translated this from german)
Every user has full read and write permission on the AE support files folder. Has anyone ever had such an error? All other plugins work as they should on every account.
Thanks for any hints!
Michael

I still think it is a permissions/ user privileges/ policies/ security issue - if it runs on one account, it is unlikely the plug-in is damaged or you installed the 32bit version in CS5 or vice versa. I strongly suspect the plug-in is unable to probe your graphics card and thus never initializes. Perhaps it's being blocked by some security tool or your user account doesn't have the permissions to load system drivers. The latter can be fixed by changing the respective entry in your group policy editor (gpedit.msc). The respective point would be in Computerkonfiguration --> Windows-Einstellungen --> Sicherheitseinstellungen --> Lokale Richtlinien --> Zuweisen von Benutzerrechetn --> Laden und Entfernen von Gerätetreibern. And of course temporarily turn off security stuff to verify it's not the problem.
Mylenium

Error creating swf movie file

Hello,
I'm trying to create a virtual world but every time I try and publish it, it says error creating swf movie file. Here's a video to show you what i mean:
http://www.youtube.com/watch?v=WRAAGoQK80A&feature=youtu.be

Hi foxxy123,
Two things that I noticed in the video:
1) You are not saving the file before publishing.
2) Flash warns you about the fonts missing from your system while opening the file.
"The document contains one or more fonts not available on your system. The text will display and publish with the font mapping below:"
So download and install the fonts on your computer "Blaster" and "Blaster Infinite" and save the file before publishing.
It doesn't seem to be saying error creating swf movie file, it just says something about the font not being right.
The message warn you that you have an anti-alias mode set on text and it requires you to have embedded fonts to use anti-aliasing. If you do not want to see that message anymore, then select your text blocks and set the anti-alias types to Use Device Fonts.
You can disable the warning message in the preferences dialog
Edit > Preferences > Warnings > uncheck "Warn on text needs embedded font".
Hope this helps,
Thanks!
Bhawna

Recent backups fail: "An error occurred while copying files to the volume."

I recently moved to a new place and set up Time Capsule as a bridge. Backups were working fine for the first couple days but then, out of the blue, I got a message that said the password I entered for Time Capsule was incorrect. I entered the correct password and hit OK. Time Machine was able to connect but now backups fail with this error: "Unable to complete backup. An error occurred while copying files to the backup volume."
Time Machine indicates it is "preparing backup" for a few minutes, then sits at "zero of __MB completed" for a long while, finally starts backing up and gets to the end but then fails. Console indicates "unexpected reply from backup server; ignored."
None of these attempts have fixes my problem:
--I have deleted my TC passwords in Keychain Access.
--I have tried downloading the latest Airport Utility and re-entering the TC disk's password in both Airport Utility and in Time Machine preferences.
--I have restarted my computer and unplugged & plugged back in TC.
My Internet connection works fine; TC's light is solid green. I can enter Time Machine to restore backups without a problem. The backups just fail every time now. Any ideas?

The problem really isn't the speed of the backup; it's done in 5-10 minutes, but each time it finishes, TM reports it has failed. I don't believe plugging it in overnight or letting TM try over and over will fix the problem. I've tried to manually start backups a number of times, and have let TM try to start and complete them on its own but they consistently fail.
It would be an awful shame if I had to delete my old backup--I bought the Time Capsule for the specific purpose of having backups that go back months and I don't want to lose what I've already backed up.

The last itunes update has failed - getting error program C:/program files (x86)\itunes\itunes.exe - R6034 attemp tp load C runtime library incorrectlly. I have tried to repair and reinstall. getting same error - can ayone help

the last itunes update failed - getting error R6034 attemp to load C runtime library incorrectly. Program reference - Program C;/prgram files (x86)\tunes\itunes.exe - can anyone help. I tried to use epir and did an uninstall and reinstall and still geting same error

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Time Machine will not backup after an error creating the backup folder.

I have TM that will not make backups anymore after getting an error trying to create the backup folder. It wasn't able to complete that backup so it will not create new ones.
I also have a huge file in the backup directory:"dateofbackupattempt.inprogress". It is 231 Gb as if it was trying to do a complete backup instead of an incremental one.
Any idea how to fix this?
Thanks in advance!

georgefrommosman park wrote:
Thank you Pondini.
The Time Machine symbol in the menu appears as a grey ghost, not the black symbol usually seen.
That sounds like Time Machine is turned OFF (on the Preferences panel).
I assume you clicked the TM icon in your menubar or Dock and selected Back Up Now?
It had not saved a thing and the partial file in the folder was dated back to Feb when it all stopped recording. I repaired the disc again. No issues noted.
That sounds like a backup didn't get started at all.
Tried to restart Time Machine. Same grey ghost.
Do you mean moving the big slider button on the TM Prefs panel to ON, or Back Up Now?
Decided to erase and start anew. Got the message cannot erase as disc cannot be unmounted.
Where to next? Help!!!!
Assuming you were doing Back Up Now, let's see what your logs show. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.
Also either tell us what's on the Preferences panel, or post a screenshot of it.

Move to new computer, get "An error occurred while reading files or writing files to disc. The disc

I tried to move my PE6 install and catalog to a new computer. It was on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64 bit) machine. I have always kept my photo files on an external hard drive. My photo library is 50GB, 10,000 files. Here is what I did.
Copied the original PE6 install file to the Toshiba. Installed but didn’t activate it.
Copied the entire My Catalog folder to the proper Windows 7 location.
Plugged the external drive into the Toshiba. Made sure the same drive letter as before (E).
Fired up PE6 on Toshiba. Looked good in Organizer. Everything seemed to be there, but I didn't try to make changes at that point.
Deactivated PE6 on the Dell. Activated on the Toshiba.
Then I realized that it is not right. I can edit Keywords and Rating stars on the pics, but not dates, captions or notes. I get “An error occurred while reading files or writing files to disc. The disc may be full or there may be problems with the source media.”
Only a fraction of the external drive is in use.
I can access the files on the external drive with another app (Windows Photo Viewer).
I tried Reconnect All Missing Files. Somewhat ambiguously, it says “There are no files to reconnect.”
In the properties in the Organizer for each picture are the proper file names and paths. Folder view works fine in Organizer.
I can put new files in the same external drive directories, import them into PE6, then edit them normally.
What is the easiest way to get Organizer properly connected to my files? I suppose I could reimport all the pics on the new machine, but I assume I'd lose some of my metadata. So that is out of the question.
Thanks,
Bill

Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
Take a look at this knowledge base note on the correct procedure for back-up and restore.
I think writing metadata to files for such a large catalog will be a thankless task.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

Error creating the air file

Hello,
this is my first time Air Trial:
Using a simple Webpage (including Text, one jpeg and one gif-file, I tried to creat an air file, using the air extension in dreamweaver CS4.
Following the instruction I made up the air application & installer setting, created my Cert-File and so on.
Preview looks perfect.
But when I try to create the Air file I get this:
unexpected failure: null
java.lang.NullPointerException
at com.adobe.ucf.UCF.addFileOrDir(UCF.java:358)
at com.adobe.ucf.UCF.parseOptionalFileList(UCF.java:284)
at com.adobe.ucf.UCF.parseFileArguments(UCF.java:271)
at com.adobe.air.ADT.parsePackageOrPrepare(ADT.java:199)
at com.adobe.air.ADT.parsePackage(ADT.java:156) at com.adobe.air.ADT.run(ADT.java:101)
at com.adobe.air.ADT.main(ADT.java:38)
What to do?
rgds
jack

Hello,
I feel stuck. I tried everything, incl. various Lessons but still get this error.
Could it be that I am using Air 1.5.2 but the older extension for dreamweaver 1.5.8.?
If this is the cause, when will the extension be updated??
I also read about possible certification problems. How can I check that?
DW Air Extension doesn't support it.
rgds
Jack

System errors - creating a log file

Is there any class, method for trapping system, application errors, exceptions and warnings in a system and then creating a log file.

It sounds like the OP is looking for a way to "listen" for System events and log those to a file. Is this correct? If so, you'll probably need to look at a JNI solution...

Rerun failed queries from transaction log backup files

I recently ran into an issue where live production data was failing to insert into my database. When my windows service inserted data the query failed and returned an error message indicating that the transaction didn't succeed.
After restarting SQL the insert statements started working again as they had before. However, because of this I missed about 24 hrs worth of important production data. My server is currently configured to make database backups every 24 hours and make transaction
log backups every hour.
Is it possible to reapply the SQL queries that failed from the transaction log backups? I understand the transaction log backups contain information about what in the database changed, but does it contain the statements that attempted to run but failed?
thanks for any help!

Thanks for all the replies. Here's the error message I'm getting..
An error occurred in
the Microsoft .NET Framework while trying to load assembly id 1. The server may
be running out of resources, or the assembly may not be trusted with
PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check
documentation to see how to solve the assembly trust issues. For more
information about this error: System.IO.FileNotFoundException: Could not load
file or assembly 'microsoft.sqlserver.types, Version=11.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot
find the file specified. System.IO.FileNotFoundException: at
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String
codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint,
StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName
assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly,
StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString,
Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr
pPrivHostBinder, Boolean forIntrospection) at
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence
assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at
System.Reflection.Assembly.Load(String assemblyString)
Basically SQL was having difficulty reading the microsoft.sqlserver.types.dll assembly. This assembly is used for interacting with the Geography data type. I was getting this error message directly from within SSMS - not just in my .net app. Also, there's
not triggers on this table or any custom SQL besides my insert statement.
Then consensus I'm getting is that this isn't really possible to do using transaction logs without extreme difficultly. I installed the ApexSQL before posting on this forum but I wasn't able to find my insert statements.

AddressBook created empty backup file

10.4.7 with all the updates. I tried to backup AddressBook as its been a couple months since the last backup. I get the file, but it is a directory with only one file named xxx and has size of zero. Removed the AddressBook preferences, ran Preferential Treatment, Rebuilt Permissions and no change. Everything else in AddressBook works fine. ktrace of AddressBook shows lots of file activity but no real attempts to write to the backup file, just the creation of the directory and the xxx file.
Switching to a test user account, AddressBook generates a backup file with data in it.
macbook pro

I wish I had a good answer for that. The basic approach I used was to run ktrace to see if I could find the cause. Thats what left the xxx file in the directory. It didn't help. Then I found 2 prefereneces for Address Book. The obvious one and one what another few characters at the end. I removed both and let it rebuild. Only the obvious one got rebuilt. That didn't help. Thats when I noticed that the contents of the backup file only consisted of an empty xxx file. Removing the xxx file from the address book directory then made everything work. Obviously the xxx file was not the original cause. However, it also kept address book from creating a backup. Perhaps there was something in one of the 2 preference files that originally caused the problem. I can't tell at this point.

RMAN new Setup Fails 11g ERRor Creating Control Backup file

Similar Messages

Maybe you are looking for