RME: User defined groups on basis of snmp server-location

Hi,
We have abt 3500 devices in LMS3.2.1, and we want to make user defined groups in RME on the basis of devices configuration of snmp server-location ...
Please advise that it is possible or not?
Thanks

Hi Michel and thanks for the reply.
The "Physical Location" groups magically started working. I had tried to apply a bunch of device update packages a couple of days ago. I thought they all failed but maybe some of them actually applied. I have no idea but the 2 groups with a rule like this one are now populating:
Device.Hostname startswith "XYZ"
However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
Device.Admin_responsibility equals "XYZ"
Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups. I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked. I always had to go into group admin and manually refresh to get the groups to update. I have tried that several times in 4.1 with no luck.
-Jeff

Similar Messages

RME User Defined Group

Hello,
i create a group under RME > User Defined Group. (named TEST)
i choosed system.domainname under Rule Expression tab.(net.xxx.com)
and i want when i add a device that has domain name net.xxx.com, it comes in under my TEST group automatically.
p.s : i clicked "membership update" as automatic ....
is not it possible or am i doing it wrong ?

Dynamic groups in RME work nice for me.
You may wish to post the rules you defined to form this group
Also what is the parent of your group?
Cheers,
Michel

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

LMS 3.2 Common Services User Defined Groups problem

CiscoWorks LMS 3.2 is installed on Windows 2008 64-bit server.
All devices are added into appropriate User defined group in Groups/Common Services.
All groups are fine except that Members of group named Switch-HO-access have been copied also to group named Router-Branch by system for unknown reasons.
At few files we have noticed errors :
" FATAL com.cisco.nm.xms.ogs.server.OGSServer main Exception while OGS Server start up: CTMRegistry::startRegistryServer() : Can't find/start registry server " and
" com.cisco.nm.xms.ogs.util.OGSException: CTMRegistry::startRegistryServer() : Can't find/start registry server ".
What is the reason for copying this devices and is there some other underlying problem?

it seems that the errors you see correlate with regular stopping/starting of the LMS processes (dmgtd) so this would be a normal behaviour.
Can you provide a screenshot of the problem you describe and also the rule for the group Switch-HO-access and Router-Branch

Prime Infrastructure 2.0 Importing user-defined group rules

Dears,
I'm looking for a way to import rules to put devices in a user defined group.
I can see how I can create groups and rules manually, but not how I could export or import those rules.
Is this possible, or on the roadmap?
Cheers,
Michel

In the Cisco Prime Infrastructure 2.0 Deployment Guide under LMS 4.2 Data Migration there is a way to import settings from a "special" backup made from LMS.
This should allow for importing userdefined groups.
Does anyone have tried this yet?
Cheers,
Michel

User defined groups authorization

Hi Dear;
is there any possibility to manage the authorization of user defined field or user defined groups in a form?
regards;

Dear Mr Bittar,
Can you check the Expert Empowerment Session:
User unable to modify the UDF form settings
If you go to the following link and write authorisation in the search option the session will appear in the list.
https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706503&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

LMS 4.1 No User Defined Groups shown in Fault Notification Groups?

Hi,
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group:
Admin > Network > Notification and Action Settings > Fault Notification Group
Am I missing something?
Thanks for help!

It is not generic, Are you superuser? Any device restictions?
Cheers,
Michel

LMS4 - overview about all devices and their user defined groups

Hello,
How is it possible to generate a report to get an overview wheather all devices matches in their intended user defined groups?
For instance this style:
name mgmt-ip user-defined-group-name
Cant find OGS attributes in report generator.
thx for hints, Steffen

Do publish the rules you use to get he devices.
What is the parent group of your devices
Cheers,
Michel

I suddenly cannot add/edit users or groups!!! (Lion Server)

I suddenly cannot add/edit users or groups!!! (Lion Server)
On the latest Mac Mini Server Lion 10.7.2
Everything was working fine at first, I'm pretty sure either since i've upgraded to 10.7.2 or since we try to connect Windows8 to the server, Lion Server is not working to good anymore, from that time I cannot add/edit users or groups & assign any users to any goups, the + sign looks desable, and everything seems pretty glichy. The other thing I have notice is that a huge amount of Users & Groups has been added without my consent.
Do I have to ReInstall Lion Server??
Why do I have all these random Users & Groups listed? (see screenshot)

I had the same issue. I opened the Workgroup Manager application and noticed the message "not authenticated as diradmin to directory: /LDAPv3/127.0.0.1" was under the icon bar at the top of the popup screen. When I clicked on that bar I entered the diradmin username and my password. After I exited the authentication dialogue box the message now read "Authenticated as diradmin to directory: /LDAPv3/127.0.0.1."
At that point I had full privalages in both the Workgroup Manager and Server App to create users and groups.
Not sure if this why the problem occurred in the first place but at least I resolved it without any major problems.

Prime Infrastructure 2.2 snmp-server location

We have implemented Cisco Prime Infrastructure 2.2 in our facility. We have each switch loaded in with an "snmp-server location" set for the switches for easier identification and quicker troubleshooting. We would like that location to show in the network topology map as well as in the email alerts it sends if one of those switches goes down. Is this something I am overlooking, and if so, can someone please explain to me how to make this happen?

Hi William,
snmp-server location is synced from the devices & also the info available in various report.
But, if i'm not wrong you want to customize the e-mail body of notifications sent out from the prime.
This functionality is no where discussed in PI user guide & i'm afraid not possible as of now.
Also, there's bug related to snmp-server location even retrieving it from the reports
CSCuj09556 : PI 2.0 corrupts device config by doing snmp set for location after sync
https://tools.cisco.com/bugsearch/bug/CSCuj09556
CSCuo16889 : PI 2.0 - Does not poll sysLocation for 3750 device
https://tools.cisco.com/bugsearch/bug/CSCuo16889
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Prime Infrastructure 2.0: Running an inventory sync removes "snmp-server location" in running-config

Hello,
we're running Prime Infrastructure 2.0 (version VA-2.0.0.0.294).
I was scared as I figured out one hour ago that running an inventory sync (Device Work Center) removes the command snmp-server location and adds the command snmp-server host "PI-ip address" "snmp rw community" in the running-config.
Has someone the same behaviour or can reenact this scenario?!
Can someone imagine that this behaviour has something to do with a configuration setting in PI?
I'm perplexed and got gray hair now.
Thank you for your answers or tips.
Bastian

Hello Rob,
I just successfully installed the patch. The snmp-server location is not touched anymore while running a inventory job.
But PI still enters this string in the running-configuration:
snmp-server host "PI-IP address" " our snmp RW community- string"
although there already exists the entry:
snmp-server host "PI-IP address" version 2c "community-string (not the snmp rw-community-string)"
Do you or anyone else has the same behaviour that PI adds automaically himself as snmp trap receiver with the SNMP-RW community?
Regards
Bastian

LMS 4.2 User Defined Groups Empty after Daemon restart

Hello
I need some help here.
In order to get topology services to run on a non resolvable DNS server I have followed the instructions in the online help and got Topology Services to start. My issue now is that all my userdefined groups are empty and I can not edit them - it gives me a error message.
Checked the parent groups and these are as supposed - the system groups - subnet groups fx are also populated.
What do you advise?
I have read oither posts and some people were advised to restart crmdmgtd as in this thread:
net stop crmdmgtd
net start crmdmgtd
http://https://supportforums.cisco.com/message/3414498#3414498
Should I just follow the same steps? I can not see find this process in 4.2
Thanks Isaac
PS: These were the steps followed in order to make Topology Services to work.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The Cisco Prime LMS client must be able to resolve the hostname of the Cisco Prime LMS server to server's IP Address, through DNS.
If the Cisco Prime LMS server is not DNS resolvable, Cisco Prime LMS client can access it with the IP address itself, by performing the following steps:
Open the orb.properties file. Solaris or Soft Appliance: NMSROOT/lib/classpath Windows: NMSROOT\lib\classpath where NMSROOT is the directory where you have installed Cisco Prime LMS. Set the property as follows: jacorb.dns.enable=off Go to Admin > Trust Management > Local Server > Certificate Setup.
The Certificate Setup page appears. Enter the IP Address of the Cisco Prime LMS Server in the Hostname textbox. Populate the other columns as explained in the Online help for Administration of Cisco Prime LAN Management Solution 4.2. Click Apply to generate the self-signed certificate. Restart the daemons. See the Online help for Administration of Cisco Prime LAN Management Solution 4.2 for instructions. You will be able to launch Topology Services with the IP address itself.

Hi Michel and thanks for the reply.
The "Physical Location" groups magically started working. I had tried to apply a bunch of device update packages a couple of days ago. I thought they all failed but maybe some of them actually applied. I have no idea but the 2 groups with a rule like this one are now populating:
Device.Hostname startswith "XYZ"
However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
Device.Admin_responsibility equals "XYZ"
Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups. I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked. I always had to go into group admin and manually refresh to get the groups to update. I have tried that several times in 4.1 with no luck.
-Jeff

User Defined Types menuitem not appears in Server Explorer at Remote Server

Hi,
I'm working on oracle 10g,odp.net with 2.0. i created two types which are input and output parameters for a function. I installed odp.net (ORACLE DATA PROVIDER FOR .NET 11.1.0.6.20) and generated UDT custom class code. It's working in my system. But when i installed odp.net (ORACLE DATA PROVIDER FOR .NET 11.1.0.6.20) in my remote server, its not showing the UDT Custom Class Code Generation Wizard to create UDT Custom Class Code. I have installed oracle Client 10g,.Net Framework 2.0 and ODP.Net(11.1.0.6.20) in the server.
In my Local system server explorer it's showing
Tables
Views
Procedures
Functions
Packages
Synonyms
Sequences
XML Databases
Java Classes
User-Defined Types
In server explorer it's showing only
Tables
Views
Synonyms
Sequences
Procedures
Functions
Packages
Package Bodies
Why its not showing User-Defined Types.
Pls Help.
Ideas are highly appreciated.
Anil

As you noticed, not all database objects are available in Server Explorer, and because of this they can't have scripts generated for them, nor can they be compared with Schema Compare.
In a pinch, you should be able to use SQL Developer to do this.

User defined name in place of application server in SAPGUI 6.40

Hi,
Can anybody please let me know how to define company name in place of static Ip in SAPGUI 6.40.
I am using AIX 5.3L / Oracle 9.x / ECC 5.0
I have given static IP in the space provided for application server which I don't want. I want to give company initials (XYZ) in place of application server for the safety purpose.
Thanks in advance
Sanjay

U can put the ip of the host server or the hostname of the server. How can you put the company's name. And wven if you put the company name which machine it will connect.
But if you want to do it by any means then do it as under\
In the frontend computer got to---->Windows->system32-->Drivers--->etc
There will be a file hosts.
make the following entry in this file
192.168.0.xxxx company name
means the ip of the sap server your company name
Use this name in the sapgui setting.
But the restriction is that in every frontend machines this entry has to be mentioned.
Pl dont forget to award points
Regards

When to user Availability Group versus traditional Clustered SQL Server

Hi...
I'm trying to get my arms around when to use an SQL Server 2014 Availability Group. Here are the characteristics about my platform:
2 physical servers (Windows Server 2012 / SQL Server 2014)
Both servers connected to same LAN
External SAN storage connected DIRECTLY to each physical server via fibr3-channel. (No fibre-channel switch)
Database resides on SAN storage.
I've set up a failover cluster between the 2 physical servers.
I've created a high availability group with a Primary/Secondary and synchronization.
Both Primary/Secondary are green and show synchronized. The concern I have is that the Primary says Synchronizing (No Data Loss) and the Secondary says Not Synchronizing (Data Loss). When I use the Failover Wizard to failover, it tells me that I will have
data loss on the Secondary.
So my questions are these, do you need more than one Secondary node to have an effective Availability Group? If I only plan to have the 2 physical servers, should I be setting up a traditional Clustered SQL Server installation.
I've used the traditional Clustered SQL Server in the past and used the Active/Passive licensing for the SQL Server software but the Always On Availability Group looked interesting to me, but NOT if it requires more than 2 physical servers and more
than 2 SQL Instances (and licenses) to provide proper failover capability.
All input will be appreciated.
Thanks,
Brett

Hi Brett,
An AlwaysOn Availability Group is created between several standalone SQL Server instances, you don’t need to set up a traditional clustered SQL Server installation when configuring AlwaysOn Availability Group. Also you can have an effective Availability Group
with only one Secondary node.
From your description, you have an synchronous-commit availability secondary replica
and it says Not Synchronizing. This issue can be caused by the following:
•The availability replica might be disconnected.
•The data movement might be suspended.
•The database might not be accessible.
•There might be a temporary delay issue due to network latency or the load on the primary or secondary replica.
Please resolve any connection or data movement suspend issues. You can check the events for this issue using SQL Server Management Studio, and find the database error.
Reference:
Data synchronization state of some availability database is not healthy
Availability databases in unhealthy data synchronization state (Error: 35285, Severity: 16, State: 1.)
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

RME: User defined groups on basis of snmp server-location

Similar Messages

Maybe you are looking for