RoboHelp 10 not integrating with TFS 2102

Hi all,
I'm trying to integrate RoboHelp 10 with TFS 2012 so I can use source control through it.
I've run through this tutorial: http://www.adobe.com/devnet/robohelp/articles/robohelp-tfs-integration.html but when I go to click "Add to Version Control", I don't see TFS as a version control provider. All I get is RoboHelp SharePoint Connector.
I've also tried modifying my registry following this topic: http://helpx.adobe.com/robohelp/kb/registry-settings-microsoft-team-foundation.html but I get the same results using that.
I can access the TFS server through Visual Studio's Team Explorer, and I've mapped my project folder through Team Explorer's Source Control Explorer.
I'm not sure what else I can do at this point.
Any help anyone can provide on the matter would be appreciated.

I'm looking for a solution but my problem is slightly different. I'm running Visual Studio 2012 (update 4) and RH10. When I installed the 32 bit MSSCCI Provider, the TFS option became available (the 64 bit provider was ignored). Now I get an error on check-in citing "Trouble with TFS power tools". The details says there was an "Error loading the Changeset Comments Policy policy". I have tried installing both the 2010 and 2012 TFS Power Tools (combinations of one, the other, both) but still get the same error.
Thanks!
Thomas

Similar Messages

How to work in RH9 when project is integrated with TFS and TFS server is down

My RoboHelp 9 project is integrated with TFS/Visual Studio. The server went down yesterday and won't be back up until late today.
If I open the project locally (rather than from Version Control), how do I eventually get the latest files (those that I've worked on locally) into Version Control?
Thank you.

Hi,
I use the following method:
1.       Open the project and disconnect from source control.
2.       Modify any files you need. Be aware that when you add/rename/remove/move files, the RoboHelp control files are modified too. (.apj and .fpj)
3.       When TFS is up, check out the files using team explorer. Do NOT overwrite local files. (Make a backup first.)
4.       Using TFS, check in all modified files. Do NOT check in the XPJ file. If you do, the project will lose its connection with source control.
5.       Thrash the local project.
6.       Get the latest version from the server.
Be aware that this requires that you know what you’re doing. Especially when control files are modified. When you only modify the content of existing topics and check the existing topic in, you should be fine.
Greet,
Willam

WLC not integrating with Radius Server

Hello world,
I have the following situation:
One WLC 2000 Series (software version 7.0.230.0) with multiple SSID`s, one is with 802.1x integrated with a Radius Server.
Everything worked fine until fiew days ago, when users were unable to logon via they`re certificates on Windows XP.
The infrastracture didn`t suffer modifications.
What i have checked: Radius certification isn`t expired, client certification isn`t expired, the password between controller and Radius is correct.
There are no ACL`s between the WLC and the remote Server. I can ping the devices, other SSIDs on the same controller (wpa/psk) are working correct.
The AP`s are 1242.
I have tried deleting the SSID, configure it back. The OS on Windows Server is 2003 Standard. The AP`s are configured H-Reap.
I have increased the Server Timeout from Radius Authentication Servers from 2 to 30 sec.
The message logs recived on WLC Trap Logs:
RADIUS server X.X.X.X:1812 failed to respond to request (ID 161) for client xx.xx.xx.xx.xx.xx/ user 'unknown'
The message from the debug dot1x aaa enable:
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLING_STATION_ID(31) index=1
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_CALLED_STATION_ID(30) index=2
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT(5) index=3
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_INT_CISCO_AUDIT_SESSION_ID(7) index=4
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IP_ADDRESS(4) index=5
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_IDENTIFIER(32) index=6
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_VAP_ID(1) index=7
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_SERVICE_TYPE(6) index=8
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_FRAMED_MTU(12) index=9
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_NAS_PORT_TYPE(61) index=10
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_EAP_MESSAGE(79) index=11
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_RAD_STATE(24) index=12
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Adding AAA_ATT_MESS_AUTH(80) index=13
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df AAA EAP Packet created request = 0x1cff348c.. !!!!
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df Sending EAP Attribute (code=2, length=6, id=10) for mobile xx.xx.xx.xx.xx.xx.
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00000000: 02 0a 00 06 0d 00 ......
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.318: 00:15:e9:33:75:df [BE-req] Sending auth request to 'RADIUS' (proto 0x140001)
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] AAA response 'Interim Response'
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df [BE-resp] Returning AAA response
*radiusTransportThread: Mar 06 09:37:07.328: 00:15:e9:33:75:df AAA Message 'Interim Response' received for mobile xx.xx.xx.xx.xx.xx.
*Dot1x_NW_MsgTask_7: Mar 06 09:37:07.329: 00:15:e9:33:75:df Skipping AVP (0/27) for mobile xx.xx.xx.xx.xx.xx.
The messages on Windows 2003 Standard:
User Y was denied access.
Fully-Qualified-User-Name = xx.domain.com/Users_T/user
NAS-IP-Address = X.X>X.X
NAS-Identifier = Cisco_
Called-Station-Identifier = ---------------------
Calling-Station-Identifier = ---------------------
Client-Friendly-Name = ---------------------
Client-IP-Address = ---------------------
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type = Smart Card or other certificate
Reason-Code = 262
Reason = The supplied message is incomplete. The signature was not verified.User Y was denied access.
Fully-Qualified-User-Name = xx.domain.com/Users_T/user
NAS-IP-Address = X.X>X.X
NAS-Identifier = Cisco_
Called-Station-Identifier = ---------------------
Calling-Station-Identifier = ---------------------
Client-Friendly-Name = ---------------------
Client-IP-Address = ---------------------
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type = Smart Card or other certificate
Reason-Code = 262
Reason = The supplied message is incomplete. The signature was not verified.
Can anyone help why i cannot log the users via 802.1x ?

Okay that is good..... this is what I would do next. I would create a test ssid that uses PEAP MSchapv2 and create a new policy in IAS that is basic. Allow 802.1x wireless and user group only and see if you can reconfigure one of the XP machines for PEAP. Can you also post a screen shot of your polices (connection and network) so we can review it.

Can Bugzilla be integrated with TFS.

Hi All,
1. Is it possible to integrate Bugzilla with TFS?
2. Is migration possible between Bugzilla to TFS?
If possible then, could you please explain the process.
Thanks in advance.
Regards,

Hi Ranjit,
Thanks for your post.
There’s no default tool support integrate between Bugzilla and TFS. To move work items from Bugzilla to TFS, you can try export the Bugzilla work items to Excel, then import the work items from Excel to TFS team project. Please refer to the discussions in
this
post and this
one.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Integration with tfs

Does Project Server online integrate with on premise tfs or the new online tfs service?

Hello,
as Anton mentioned – out of the box there is no integration solution implemented as it was offered by MS for the on-prem versions of the two products.
Microsoft however offers a set of APIs for the online and on-prem versions of those tools which dependant on the use case can be used to achieve the integration (Project Server: CSOM, JSOM, odata; Visual Studio Online / TFS: odata). Especially with the odata
APIs you´ll see that MS has committed themselves to provide with a set of standard APIs throughout multiple MS products (Project Server, Project online, Visual Studio Online, CRM, SharePoint, …)
You can custom code against those APIs or reuse standard products which are available on the market by partners which offer those scenarios between Visual Studio Online and Project Server on-prem and online (e.g. CS Connect by Campana & Schott * -
http://www.campana-schott.com/en/technologies/cs-connect?qll=mf).
Please let me know if you need further information on this…
Bastian
* Disclaimer: The company I work for

Forum not integrated with portal content

Hi All,
I like the new forum functionality in the NetWeaver Portal 2004s SPS 12.
But I expect the integration of the forum and the protal environment. But I cannot create links to files that still exist in the portal. I can only adding new files, where are they stored?
How can I create links on files and folders, that were stored in the portal. Without copy & paste access-ids, i think about a wizard which navigates me to files.
Bye and Thanks for helping me
Steve

Sorry all this was sent as a reply to the watch email... apparently SAP doesn't even use all of the functionality... also as stated... even documentation is being removed from what they originally released!
Agreed... this is a major integration for end users that is not there yet. The new products coming out seem to be because of the fact that it is used on SDN and SAP Can now claim that it is part of the "standard product" but as most of the other KMC technologies it probably wont get the dedicated development that is needed.
At this point I don't think there is a way to do that. I am more concerned with the fact that the NNTP portions of the forums don't work, the documentation is horrible, and there are tons of other things wrong!
Thanks
Trevor

E-mail notifications not integrated with CRM WebUI

Dear Experts,
I would like to know if this is the Limitation for extended notification.
If not, is there any hints about integrating the extended notification with CRM WebUI?
Many thanks,
Perry Song

Dear Experts,
I would like to know if this is the Limitation for extended notification.
If not, is there any hints about integrating the extended notification with CRM WebUI?
Many thanks,
Perry Song

RoboHelp 8 Integration with Perforce

I would like to integrate RoboHelp 8 with Perforce to allow our writing team to work on different topics within the same help project at the same time. However, I am having a difficult time locating a document that definitively describes the set up and configuration process. Can someone on this forum provide their instructions for integrating RoboHelp and Perforce?
Thank you in advance for your assistance.

Can you please tell us the type of output you are generating? Is it a CHM file? Also there are a number of variables in your problem that we need to ask about in order to get to the bottom of things.
You say you can't see the problem. Do you mean that when you view the output all the topic titles and TOC pages display the French correctly? If so, who is getting the problem?

ThinkVantage Updates Not Integrated with Access ThinkPad

My R32 has an Access ThinkPad button which opens a menu of help topics.
Within these topics there are command buttons for System Updates, Easy Eject, Access Connections etc.
When I download an update, the software does not update the location for these tasks within Access ThinkPad.
Thus, I am loath to download updates that are gradually eroding Access ThinkPad which I like and use alot.
This may sound like nit-picking, but the Access Thinkpad and Help need updating as well.

Sorry all this was sent as a reply to the watch email... apparently SAP doesn't even use all of the functionality... also as stated... even documentation is being removed from what they originally released!
Agreed... this is a major integration for end users that is not there yet. The new products coming out seem to be because of the fact that it is used on SDN and SAP Can now claim that it is part of the "standard product" but as most of the other KMC technologies it probably wont get the dedicated development that is needed.
At this point I don't think there is a way to do that. I am more concerned with the fact that the NNTP portions of the forums don't work, the documentation is horrible, and there are tons of other things wrong!
Thanks
Trevor

Equal logic Storage not Integrating with SCVMM 2012 R2

Hi,
I am using Equal logic 6210 with firmware 7.0. I also installed Hit Kit 4.7 on my SCVMM servers (in High Availability Cluster) and direct access to my ISCSi san subnet.
I am facing issue in adding storage to my SCVMM 2012 R2, after running below commands i am able to see Storage Proivder in SCVMM but no success in adding storage in Array tab of scvmm.
Please guide me , see attached screen shots
Import-Module -Name 'C:\Program Files\EqualLogic\bin\EqlPSTools.dll'
New-EqlGroupAccess -GroupName Group -GroupWKAddress 192.168.1.5 -MgmtWKAddress 10.1.1.5 -UserName grpadmin -Password testpwd
Update-StorageProviderCache
Import-SCStorageProvider
Afzal Munir
<ADMIN NOTE: Phone number removed per privacy policy>

Hi Kevin
I am struggling with the same thing during bare metal installs of Hyper-V hosts. In my case I have managed to narrow it down to the language settings in the oobe pass. If I include them, parsing of the unattend file halts (without an explicit error anywhere)
and the host fails to join the domain. Could you try to leave out the language settings in oobe pass and see if it then completes as expected? Would be interesting to see if it actually is the same issue with a slightly different flavour :)
EDIT: Got a bit further now with the new release of WS2012 R2. All the testing I've done has been with the 05182 build. Stumbled across KB2913316 which stated that a new build (31419) was released december 11th. Allthough the KB does not directly apply to our
issue I thought I'd give it a go, so I went about building a new vhdx-image. Low and behold - the first test went smoothly applying all the settings in the unattend file! I'm going to continue testing to make sure the successful run wasn't just a fluke.

XML Publisher is not integrating with Reports 10g Concurrent program

Hello,
I created report in reports 10g. Saved report in the custom_top/reports/US. Created a concurrent program for the report with output as XML. Created a Data Definition with the same short name as the concurrent program and created a template used the same short name as the Data Definition, associated template with the data definition. Uploaded the .rtf file to the template.
The issue i have is when i run the concurrent program the output is xml tags rather than the xml publisher report.
Any help will be appreciated.

| Starting concurrent program execution...
+-----------------------------
Arguments
P_Start_Date='01-JAN-11'
P_end_Date='15-AUG-11'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
Report Builder: Release 10.1.2.3.0 - Production on Wed Aug 24 09:25:14 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE

Lotus Notes integration with WebCenter?

I need to integrate Lotus Notes in WebCenter without using Adapters .can anyone help me out??
Thxs in Advance
praveena

hi praveena,
you should be able to use the lotus notes portlet that is provided as part of the OracleAS Provider for Lotus Notes.
http://www.oracle.com/technology/products/ias/portal/point_downloads.html#lotus
the portlet was originally designed for oracle portal but you should be able to register it in WebCenter as well.
regards,
christian

PA not integrating with OM

Dear Experts,
I'm kinda new here and need clarity on this issue.
When an Employee is terminated in personnel administration, he still holds a position in the organisational structure.
This shouldnt be so, please advise on what to do.
Regards.

If integration is on, there should be no need to run any RHINTE-reports to have the dummy position assigned. The dummy position should be assigned immediately, and the relationship 008 should be delimited in OM.
Does your problem occur to all employees you terminate? If so, check your leave action. It should be correctly delivered from SAP, so if you have changed it, maybe compare to client 000.
/Kirsten

HT5361 Why iCal is not integrated with Mail

I used Outlook Mail for years and one of the best features was the ability to quickly look at my calendar while I was in Outlook, why cannot Mail have this feature? I want to quickly see ical in mail, not go out of mail to see my calendar.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Integration with Lotus Notes 8.5 - Room Reservation System to Add Approval Steps

I have implemented several LiveCycle Forms with Some Workflow all
based on XML and .NET. All working fine.
Now, I have a new project (yet to be approved) which is to add
Workflow and Approval Steps for Lotus Notes Room Reservation System.
The current system on Lotus Notes, is out-of-the-box from Lotus, and
it is working very well, and it has great repeat option to setup the
required schedule to make the needed room reservation system.
The user now requested to add some new features like add 2 more
approval steps, and some new fields.
I can modify the application in Lotus Notes, but this will creat a new
problem. If there is new version coming for this system from Lotus
Notes, then I will have to sync the modifications I did, and it will
be a problem.
I have put some screen shots to help understand what we are talking
about:
https://docs.google.com/leaf?id=0B97clwYte2SHYmUyZTRiZDEtZWRjZS00YmQ3LTg1MDUtM2MxNmYyYTIzM 2Ix&hl=en
I have developed several programs in the past, I was able to connect
to Lotus Notes Database from .NET.
My plan is to develop the new Form in Adobe LC Desinger, with all the
new required features, and connect to what ever existing functions/
data to Lotus Notes (in both directions).
The only thing I need help for is how to capture the Repeating
Calendar Entry. I think this will take some effort. Becuase, once I
capture all input parameters, I have to call a Web Service (in .NET)
to get a list of Free Rooms to choose from.
Here are my questions:
1. Do you have any feedback on the above ?
2. Any one has done any work to capture a repeating calendar entry in
a PDF Form ?

Hi Anil
For Lotus notes integration with SAP solutions, pl check the following links:
http://www.redbooks.ibm.com/redpieces/pdfs/redp4215.pdf
http://www-306.ibm.com/software/info/ecatalog/en_US/products/Z262246B25186K14.html
Best regards
Ramki

RoboHelp 10 not integrating with TFS 2102

Similar Messages

Maybe you are looking for