Robohelp 8 not working, folder and subfolders deleted
Hi,
I am using Robohelp 8. I had worked on some files on Thrusday, generated a .chm output, and saved the source and output files onto our company server. My problem is that when I try to open both the files, the one on my computer and the company server, I get a message saying a particular folder and all the sub-folders within it,are missing from the Project Manager. And I that I should delete them. However, while trying to open Robohelp 8, I get a message saying Adobe Robohelp has stopped working. I also get a message saying a problem has caused the system to close. Windows will notify if a solution is available.
As far as I know I have not worked on Robohelp since Thursday, 28 Oct. I have not deleted any files (even the one that Robohelp now inidcates are missing).
Any help or advice about what could have gone wrong, will be really appreciated.
Thanks,
Sangeeta
Hi Peter,
I applied the patches and my files now seem to work fine.
Thank you,
Sangeeta
Similar Messages
-
My itunes is not working correctly. can i delete and reinstall without losing my music
My itunes is not working correctly. can i delete and reinstall without losing music?
Hi there,
You may find the article below helpful.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
-Griff W. -
The message says the computer is not authorized. I deauthorized and reauthorized it and it still will not work. Should i delete the song and download it again?
Should i delete the song and download it again?
Yes ... if just one song on an album is doing that, it usually means you've got a damaged file on your hands. -
How to count files in a folder and subfolders of the folder.
Hello everyone,
I'm having a difficulty with countin files in a Regular folder and subfolders of the folder. I've tried to use SI_ANCESTOR in a query; however, it gives me innacurate results.
I used this hierarchy to create the code below, and it works to count all the files:
Folder A ---> Folder B( subFolder of A) -
> Folder C(subFolder of B)
//get folder A
IInfoObjects regFolders = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_KIND='Folder' AND SI_PARENTID=0 AND SI_NAME!='User Folders' Order by SI_NAME");
IFolder regFolder = (IFolder) regFolders.get(0);
//get files from Folder A
IInfoObjects rFiles = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID ! = 'CrystalEnterprise.Folder' AND SI_PARENTID=" + regFolder.getID() );
ilesCount += rFiles.size();
int subCntr=0;
nt subCntr2=0;
//get folder B
IInfoObjects rSubFolders = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.Folder' AND SI_PARENTID=" + regFolder.getID() );
//get files from subFolders of Folder A
while (subCntr < rSubFolders.size())
IInfoObject subFolder=(IInfoObject)rSubFolders.get(subCntr);
IInfoObjects subFiles = infoStore.query ("SELECT * FROM CI_INFOOBJECTS "
+ " WHERE SI_PROGID != 'CrystalEnterprise.Folder'" AND SI_PARENTID=" + subFolder.getID() );
filesCount += subFiles.size();
//get subFolders of Folder B
IInfoObjects rSubFolders2 = infoStore.query ("SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.Folder' AND SI_PARENTID=" + subFolder.getID() );
//get files from subFolders of Folder B
while (subCntr2 < rSubFolders2.size())
IInfoObject subFolder2=(IInfoObject)rSubFolders2.get(subCntr2);
IInfoObjects subFiles2 = infoStore.query ("SELECT * FROM CI_INFOOBJECTS "
+ " WHERE SI_PROGID != 'CrystalEnterprise.Folder' AND SI_PARENTID=" + subFolder2.getID() );
filesCount += subFiles2.size();
subCntr2++;
subCntr++;
As you can see, the code is too complicated, and what if folder C has subFolder?
I'm guessin maybe recursion would be one way to got, but I'm not really good with it, so I was wondering if anyone has any idea on how to go about doing it.
Thank you,Hi,
For detailed information, please refer to the BI 4.0 developers guide here.
You can find the section "Setting up the development environment" in developers guide that have every single instruction to execute a java code specific to BI 4.0 environment.
Also, here are the instructions for BO 3.1 environment:
To configure a WAR file for a J2EE application that uses the BusinessObjects Enterprise XI 3.0 and 3.1 Java SDK, complete these steps:
Create a lib folder in the WAR file's WEB-INF folder.
Copy the Enterprise XI 3.0 or 3.1 Java SDK JAR files from the appropriate location below to the WAR file's WEB-INF\lib folder:
Windows:
...\Program Files\Business Objects\common\4.0\java\lib
UNIX:
<businessobjects_root>/java/lib
Copy the log4j.jar file from the appropriate location below to the WAR file's WEB-INF\lib folder:
Windows:
...\Program Files\Business Objects\common\4.0\java\lib\external
UNIX:
<businessobjects_root>/java/lib/external
Copy the entire crystalreportviewers12 folder from the appropriate location below to the WAR file's root folder.
Windows:
...\Program Files\Business Objects\common\4.0
UNIX:
<businessobjects_root>/enterprise12/JavaSDK
Open the web.xml file located in the WAR file's WEB-INF folder.
Specify the location of the utility files used by the report viewers contained in the crystalreportviewers12 folder by inserting the following code below the <display-name> and <description> tags but within the <webapp> tag definition:
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/BOXIR3/crystalreportviewers12</param-value>
</context-param>
<servlet>
<servlet-name>CrystalReportViewerServlet</servlet-name>
<servlet-class>com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CrystalReportViewerServlet</servlet-name>
<url-pattern>/CrystalReportViewerHandler</url-pattern>
</servlet-mapping>
Deploy the WAR file to the J2EE application server.
You are now able to run an application using the BusinessObjects Enterprise XI 3.0 and 3.1 Java SDK on a J2EE web application server.
Hope it helps.
Regards,
Anchal -
EMERGENCY!!!!!!!!
IS THERE ANY WAY TO RETREIVE AN ACCIDENTALLY DELETED BACK UP FROM MY TIME MACHINE DRIVE????
In other words, I emptied out a folder on my main MAC to make space and the next subsequent backup backed up the EMPTY FOLDER and then deleted the "old backup" that actually contained the contents of the very important folder.
Now only the emptied folder exists on my MAC and in the two backups on my Time machine backup drive.
This was clearly a big mistake on my part not realizing that the "old backup" being deleted by Time Machine would include backed up files that I had no intention of getting rid of....
What can I do now?
Is DATA RETREIVAL even an option?
I am sure that the Folder of files that I need are on the most recently deleted "OLD BACKUP" but how do I get to this, if even possible?????
Super desperate situation here...
Minna-help-me wrote:
Is DATA RETREIVAL even an option?
It may be possible to recover some of the data, if it hasn't been overwritten, but it won't be cheap or easy.
You've posted in the Time Capsule forum, but you mention a "backup drive." If your backups are on a Time Capsule's internal HD, instead of an external HD, it's even worse.
See Data Recovery.
Good luck. -
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million
Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset. -
The Yahoo mail toolbar is not working. Can't delete, can't move, can't mark as read, etc. It works on Chrome. What's up?
Of course they would say that. Tell us are there any other problems?
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Make sure you have the latest version. The best thing to do is first remove
the program, then get the full installer. -
Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue? I have applied all Mac updates and still having problems with the trackpad.
The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys. -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Audio is not working properly and battery is not lasting
audio is not working properly and battery is not lasting over 30 mins
Hello swampdonkey,
I see that you are having a problem with the sound and battery on the computer. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
Sincerely,
CatlosThis does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes. I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever. My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems. I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions. So here I am debating on whether to spend all this $ on an airport extreme? I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did. Just wondering if you have ATV as well and if the AE solved its problems? I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
**Glad they didn't "moderate into extinction" your post yet, lol, Thank -
made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
class Program
#region Cosmos Builder logic
// Most users wont touch this. This will call the Cosmos Build tool
[STAThread]
static void Main(string[] args)
BuildUI.Run();
#endregion
// Main entry point of the kernel
public static void Init()
var xBoot = new Cosmos.Sys.Boot();
xBoot.Execute();
Console.ForegroundColor = ConsoleColor.DarkBlue;
a:
Console.WriteLine("------------------------------");
Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
Console.WriteLine("------------------------------");
Console.WriteLine();
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("\t _____
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |___________");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t|_____| |____________| |____________| ____________");
string input;
Console.WriteLine();
Console.Write("\nAbout OS : a");
Console.Write("\nTo Shutdown : s");
Console.Write("\nTo Reboot : r");
Console.Write("\nStart Windows Normaly : n");
Console.WriteLine();
input = Console.ReadLine();
if (input == "s" || input == "S"){
Cosmos.Sys.Deboot.ShutDown();
else
if (input == "r" || input == "R"){
Cosmos.Sys.Deboot.Reboot();
else
if (input == "a" || input == "A"){
Console.ForegroundColor = ConsoleColor.DarkBlue;
Console.Clear();
Console.WriteLine("\n\n\n-------------------------------------");
Console.WriteLine("version: DISPLAYS OS VERSION");
Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
Console.WriteLine("-----------------------------------");
Console.Write("You Want to know : ");
input = Console.ReadLine();
if (input == "version"){
Console.WriteLine("--------------------");
Console.WriteLine("OS VERSION 0.1");
Console.WriteLine("--------------------");
else
if (input == "about"){
Console.WriteLine("--------------------------------------------");
Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
Console.WriteLine("--------------------------------------------");
Console.Write("Want to go back to the main window");
Console.Write("\nYes : ");
string ans = Console.ReadLine();
if (ans == "y" || ans == "Y")
goto a;
Thread.Sleep(10000);
else
if (input == "n" || input == "N")
Thread.Sleep(5000);
Console.Clear();
for (int i = 0; i <= 0; i++){
Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
Thread.Sleep(500);
Thread.Sleep(5000);
Console.Clear();
BootUserInterface();
Console.ReadLine();
// Form1 fo = new Form1();
else{
for (int i = 0; i <= 5; i++){
Console.Beep();
Thread.Sleep(1000);
goto a;
while (true);
private static void BootUserInterface() {
Thread t = new Thread(UserInterfaceThread);
t.IsBackground = true;
t.SetApartmentState(ApartmentState.STA);
t.Start();
private static void UserInterfaceThread(object arg) {
Form1 frm = new Form1(); // use your own
Application.Run(frm);
Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Aggregate at Universe but not at Report level
Is there a way to set the report to not aggregate even though the universe is set to aggregate values?
-
What is the best way to upgrade my late 2008 mbp with Leopard on it to Lion/Mountain Lion?
For whatever reason I never upgraded to Snow Leopard when it came out, and then things were a bit clunky to go to lion so I passed. I would like to upgrade to lion/mountain lion but I am not aware of any easy ways to do it, so what are my best possi
-
Can't sync songs to ipod because my computer is 'not authorized'
I just bought my ipod touch a few months ago and it was working fine till I realised some songs were missing. When I go to sync my ipod and put the songs on I get told my computer isn't authorised. When I try to authroize it I keep getting this messa
-
Hello Everyone, Does anyone know how you kan read archived SD Quotations in the original transaction VA23 (like with orders in VA03) Greetings, Peter
-
Solaris 10 : Direct Access to internet
Hi guys !!! I have a server with Solaris 10. It access the internet by a router, but i want to access in a direct point without the router. When the server is on the router the internet work good, but i plug it on direct point it does not work becaus