Role content is displayed as blank screen for one user

Hello,
Portal version is 6.0 SP 18.
A page (content 2 iviews; one iView is UWL) was added to a role and assigned to users. Although everybody can see the page via role on the portal, one user gets blank window. Page is not displayed for her and no error message is shown. But if the same user previews the portal page under the portal content, teh same page is displayed properly.
Where can this blocking be for this user? I clean cache of UWL and all personalizations; role removed from user and added again. Also I removed the page from role and add again as Deltalink. Result is the same.
I am waiting your reactions, thanks in advance.
Regards,
Mesut

Hi Mesut,
check below blog which resolves issue
iView works when previewed but is blanked when assigned to a role/page.
Koti Reddy

Similar Messages

Adjusting the display area's size for one user

For one user account, the display is larger than the area of the monitor such that when we move the mouse the whole picture scrolls since it does not fit on to the display's area.
I would have thought this had to do with the hardware adjustments with which you can adjust the hor/vert positioning, etc., but I have not been able to address this problem with these controls - In any case, those hardware controls effect all users and this is only an issue for one (of four) users.
It seems it has to do with the resolution since the fonts are slightly distorted.
The display system preferences are set correctly - and no matter what resolution is set, the problem is consistent for that user.
Any suggestions?!

System Preferences->Universal Access and check that Zoom is off.

Firefox suddenly sits with a blank screen for one specific website.

A website I've used for years I suddenly can't get to using Firefox, but I can using Internet Explorer. When I try to go to it in Firefox I get a blank white screen in the browser. I tried all the usual troubleshooting techniques (disabling add-ons, resetting Firefox, deleting cookies and temp files) and nothing helps.
I have Webroot anti-virus and it hasn't detected anything; scans run automatically every day.

Are there any special icons on the location bar that Firefox is blocking content?
You can get a possibly colored Lego icon on the left end of the location bar that indicates that Firefox is blocking a plugin.
*https://support.mozilla.org/kb/why-do-i-have-click-activate-plugins
*http://kb.mozillazine.org/Issues_related_to_plugins#Click_to_Play
You can check if there is a shield icon to the left of the "Site Identity Button" (globe/padlock) on the location bar that mixed active content is blocked.
*https://support.mozilla.org/kb/how-does-content-isnt-secure-affect-my-safety
*https://developer.mozilla.org/Security/MixedContent
You can use these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed and remains as if the computer is now Frozen. Mac book Pro leopard operating system. What can I do to get past the freeze?

Could the disk have failed?
Can you hear it?
Boot from the install DVD and see what Disk Utility says.

Fiori Launchpad displays a blank screen

My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
I installed Fiori and everything appears to be configured ok. I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003). I created a new catalog and group in the launchpad designer and assigned them to my role.
I activated the ICF services, and launchpad services via /iwfnd/maint_service. Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
ZTRANSPORT
ZQUICKVIEW
ZPAGEBUILDER_SERVICE_V_0_1
ZPAGE_BUILDER_PERS
ZPAGE_BUILDER_CUST
ZPAGE_BUILDER_CONF
ZLAUNCHPAD
ZINTEROP
ZLEAVEREQUEST
The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
SAP_GWFND     740        0009       SAPK-74009INSAPGWFND
SAP_UI 740        0011      SAPK-74011INSAPUI
GBHCM002        600        0014       SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
GBHCM003        600        0012       SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
UIX01EAP          100         0005       SAPK-10005INUIX01EAP    UI for ERP Central Applications
UIX01HCM         100         0005       SAPK-10005INUIX01HCM UI for HCM Application
UIX01TRV          100         0004       SAPK-10004INUIX01TRV   UI for Travel Application
I’ve checked ICM logs, ran the cache jobs and authorisations trace. I’m not seeing any errors anywhere so finding it impossible to troubleshoot
Please help!
Thanks
Amanda

For Approve leave requests :
Business Catalog (Launchpad)
SAP_HCM_BC_MANAGER_X1
Business Group (Launchpad)
SAP_HCM_BCG_MANAGER_X1
PFCG role for Business Catalog
SAP_HCM_BCR_MANAGER_X1
PFCG Role for Technical Catalog
SAP_HCM_TCR_T_X1
For Employee :
Business Catalog (Launchpad)
SAP_HCM_BC_EMPLOYEE_X1
Business Group (Launchpad)
SAP_HCM_BCG_EMPLOYEE_X1
PFCG role for Business Catalog
SAP_HCM_BCR_EMPLOYEE_X1

App displays a blank screen

The App screen displays a blank screen and does not respond when searching for apps

Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

[solved] Blank screen for few seconds between GDM and Gnome-Shell

Hi there,
I don't know if this phenomenon is "normal" or not, so I ask : I am using Gnome 3.6 and after I have logged in on GDM I see a blank screen for roundabout 3 seconds before the gnome-shell starts. The whole system is running fine - so this is no "real" problem -, but this 3 seconds of a black screen between GDM and the gnome-shell are somewhat annoying and I want to find out if this behaviour is normal or not .
Indeed, if I look into journalctl, I find this messages:
Dez 03 21:45:53 sushi gdm-simple-slave[272]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:45:53 sushi gdm-launch-environment][305]: GLib-CRITICAL: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Dez 03 21:46:03 sushi gnome-session[311]: WARNING: Detected that screensaver has left the bus
Dez 03 21:46:03 sushi gnome-session[311]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Dez 03 21:46:03 sushi gdm-simple-slave[272]: WARNING: Child process -311 was already dead.
Dez 03 22:00:50 sushi systemd-tmpfiles[1793]: stat(/run/user/1000/gvfs) failed: Permission denied
Actually, I don't know if this is relevant for my little "black-screen" problem (but it looks as if ...).
And
$ systemctl status gdm.service
shows nothing to worry about (as far as I can see):
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Mo, 2012-12-03 21:45:51 CET; 40min ago
Main PID: 266 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─266 /usr/sbin/gdm-binary
├─272 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─279 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-xTnD7p/database -seat seat0 -nolisten tcp vt1
└─440 gdm-session-worker [pam/gdm-password]
The hardware is an Asrock H77M-ITX board with an Intel GPU. Systemd is up and running well, no failing service units.
Any ideas, what's going on here?
Last edited by swordfish (2012-12-08 14:26:00)

Finally I found out what's going on - and it's so simple
It's just my monitor which is runing on a default resolution of 1920x1080. When I switched to 1600x900 using Gnome's system tools, the monitor needs roundabout two seconds to adjust to this resolution

Transaction solman_workcenter displays a blank screen

Hi,
When I execute transaction solman_workcenter it displays a blank screen. There is no error message.
Is there some setting that is missing. Please advice.
Regards
Phanidhar

Hello,
has your user the acording workcenter roles (SAP_SMWORK*)?
regards
Christian

Just downloaded 10.5. It gives me a blank screen for the itunes store. No error message. Internet connection fine. Have checked firewall. Any ideas?

I have just downloaded 10.5. it gives me a blank screen for the itunes store. No error message. Internet connection fine and I have checked my firewall settings. Any ideas? Or is the store blocked because of ios 5 release today?

I've had the exact same issue since late last night since I downloaded 10.5
I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
I will try japiohelp's solution and see if that does anything.

Block Purchaisng screen for one time vendor acount group

Hi Experts,
Hope everyone is doing good.
How can we block purchasing screen for one time Vendor account group.
User requirement:
He wanted to maintain only Accounting data for one time vendor but not purchasing data.Though I have suppressed all the Purchasing related fields in Screen layout for Vendor account group but still at the time of creation of one time vendor "create Vendor:purchasing screen is coming"
Is there any option to suppress/Skip this screen "Create Vendor:Purchasing Data" ?
Regards,
Uzair

- Account group is just one of the four factors influencing the field status. (If all the fields are suppressed in a screen the screen will not appear during the creation of the VMR).
- Company Code, Transaction Used and Purchasing Organization are otehr influencing factors.
- Since the field status depend on several influencing factors, Link rules are necessary which determine the instance of the field status if different influencing factors have different effects.
- Hide has priority 1, Display 2, Mandatory 3, Optional entry 4
- Say for e.g. you want a field to be suppresses due to account group but a mandatory entry due to purchasing organization. Instance hide has the highest priority. If a field was suppresses by account group what was specified by purchasing organization becomes irrelevant.
- Display overrides Required & Optional Entry
- Required entry overrides Optional entry

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that?

Blank password for sa user in SQL server

i have already checked and confirmed that checkboxes in the SA login properties does not have a tick mark and also saved the properties window after leaving the password blank
but when I'm unable to login to the software that is being connected to the respective database in sql server, i find that a password has been assigned to the sa user
our application is not working if a password has been set for the sa user. please give me a solution to set a blank password for sa user and also to make sure that a password is not getting assigned automatically

Why not just disabling SA login?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

OIM11g R2 - If two roles (ACF2 and AD) are selected together for a user req

Hi ,
We are facing a problem In the Catalog, if two roles (ACF2 and AD) are selected together for a user and checking it out.The request goes to approval process.We have not created any approval process flow.
Plz let me know how to recover from it and provide an option to provision two roles simulaneously to a user without going into approval process.
Steps to Reproduce:
1. Create a user in OIM .
2. Search that user.Administration->Users->Search User
3. Click on 'Roles' tab and select 'Request Role' under that tab.
4.'Catalog' tab opens .Click on Search icon and Add AD and ACF2 Role to the cart.
5. Click on 'Check out'
6. Click on Submit button
7. Request Summary tab opens with Request status shown as 'Obtaining Request Approval' and Request Type as 'Assign Roles'.
Note: If we assign AD and ACF2 individually to user and running Evaluate User Policies we are able to see account in Provisioned state under Accounts tab of User and request is not going to approval process
Thanks in advance

Hi,
As mentioned I created two auto approval policies
1. Request Type= Assign Roles
Level= Request Level
Auto Approval checked
Approval Rule=Requester.UserLogin Equals XELSYSADM
(Created this rule as i am logeed in as XELSYSADM)
2. Request Type= Assign Roles
Level= Operation Level
Auto Approval checked
All Scope Checked
Approval Rule=Request.RequestType Equals Assign Roles
After that i opened the user request role page and requested 2 roles (AD and ACF2).
But now also request went to approval work flow
Please point which step i have missed or any other step need to be performed.
Regards,
Edited by: Puneet Lobana on Jan 7, 2013 12:54 AM

Account search functinality is not working for one user in portal

Hi friends,
We have configured E.P 7.0 with CRM 5.0 and configured CRM PCUI business package.
We have a role called <b>accounts and products</b> in portal. So accounts can be searched in this role.
Now our severity issue is for one of the super user,for ex su1, accounts search is not working in portal but the same is working in CRM GUI.
for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
We have checked with other 2 super ids. Both ends portal and gui search is working fine.
Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
Could anyone of u please advice ASAP as this is severity issue.
Thanks & Regards
Sireesha.

Hi srinivas,
I have checked both the users credentials,permissions,groups in the GUI and also in the portal.
Both of the users profiles are assigned as same.
Could you please advice is there any other way to check it out?
Regards
Sireesha.

Role content is displayed as blank screen for one user

Similar Messages

Maybe you are looking for