Role oF Mail Box, ANA Number & TUN Number

Hi All,
We are using seeburger as 3rd party and receiving Orders from customers using AS2 sender and sending invoices back to partners using AS2 receiver.
We have purchased GXS mail box , now my questions are:
GXS prvodided us some mail box details and explained us to use the EDI partners mailbox detils to send invoices from PI.In this case do we only need to use the GXS mailbox details to pick Orders files?
One of my Partner provided the details like : ANA number: 13 digit number(xxxx) and 4 digit TUN number(XXXX).Do we need to use the same details for picking orders and posting invoices
I'm confused like if we have the details for the trading partner then we can send receive orders and send invoices using this mailbox deatils..then what is the use of GXS mail box?
Also,what is AS2 id for my partner then? Would it be 4 digit TUn number,
what are the parameters to configue in AS2 sender (GXS or trading partner mail box) and AS2 receiver?
Please clarify.
Cheers,
Smith

Hi,
Seeburger experts..
Waiting for your inputs please..
Cheers,
Smith

Similar Messages

Viewing mail box and number of unread mails for each user

i need to know if there is a ready made portlet to get the number of unread messages from my mail box, and if there is no such portlet , what is the best way to do it and where to start
thank you for your time...

There is a set of portlets for Microsoft Exchange that will be published via the PDK shortly. The set contains a portlet for email, contacts, and schedules.

Is there a limit to the number of mail boxes in mail?

I cannot set up a new mailbox under the mail box menu within Mail. All I get is a "boing.

Mail is set to check every 5 minutes.
The error it reports is "Could not connect to the IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, uncheck the "Use SSL" checkbox in the Avanced tab of Account preferences"
However, I'm sure it's not a problem with the settings because 1) these settings have been fine for weeks, and 2) if i inactivate any of the accounts the others (that are showing errors) no longer show errors).
If I have fewer accounts connecting, or if I switch of SSL, then the errors go away.
I would prefer to connect using SSL, which is why I'm not simply switching off SSL and forgetting about it.

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

IPad- on Yahoo pages the mail icon with the red number indication shows email. When I tap, it asks me to sign in again. I do. It takes me to yahoo mail but there is nothing. All the folders are emptied. All mail is either read, trash, or deleted.

iPad- on all Yahoo pages the mail icon with the red number indication shows email. When I tap, it asks me to sign in again. I do. It takes me to yahoo mail but there is nothing. All the folders are emptied. All my mail is either read, trash, or deleted. Also, when I tap on the mail app on iPad home page, gmail is no problem but for yahoo I get error: no password for yahoo. Go to Mail Account Settings and enter password. I'm stuck. Suggestions? Thank you.

Ask and you shell receive.....lol
Go to your Gmail account in the browser.
Hit the folder icon that brings up the folder selection.
Scroll down to the bottom and select desktop version.
The broswer will refresh and bring up your gmail account as though you were looking on it on the computer.
The go to the upper right corner and select settings.
Then go to forwarding and pop/imap
Go look at pop download
There you'll find 3 numbered lines
Go to 1. Status
And select enable pop for all mail
Then save the settings
Once you have done that you can go back to BlackBerry device settings and sync your mail or wait for it to sync it's self.
Let me know how it works out.
I just did it and it sync within minutes.

Why "Bulk Mail" foder does not display number of unread messages unless I click the folder (Yahoo mail through IMAP)?

Yahoo mail account's "Spam" folder (as viewed through "Yahoo mail" web interface) is displayed in Thunderbird as "Bulk Mail" (IMAP). Looking at the account's foders in Thunderbird I see the number of unread messages in each folder. "Bulk Mail" appears always to be empty. If I click the "Bulk Mail" folder, then magically messages appear in message list, and the number of unread messages is displayed next to folder name, like in all other folders of this account.
Why I need to touch the "Bulk Mail" folder in order to see the number of messages in it?
Yahoo deletes messages from this folder at certain periods. I'm in danger of loosing messages unless I remember to touch all of my Yahoo account's Bulk Mail folders in Thunderbird.
How I can get "Bulk Mail" folder to show the number of unread messages like all other folders of the same account do?
Thunderbird 24.6.0, Windows 7 Enterprise (Sp1)
pekka

I don't use IMAP in Thunderbird, so I can't provide step-by-step instructions, however, other e-mail programs have settings for whether or not to synchronize each individual folder on a schedule or using push IMAP (vs when clicked). If Thunderbird has those settings, I would expect them to appear in the folder properties or account settings. Perhaps this will be helpful, but I don't know if you've already done some digging like this or not.
FYI, a quick search brought me to this page:
https://support.mozilla.org/en-US/kb/configuration-options-folders
One item listed in that page is this:
Configure IMAP folders, connections and namespaces
Menu location: Tools | Account Settings | <account name> | Server Settings | Advanced
Perhaps that would be a good place to start since it does mention IMAP folder connections, but folder properties still might be an easier place to peek first, just in case. For that, the site lists this:
Configure folder properties (IMAP folders only)
Menu location: Edit | Folder Properties | General Information
However, I think you could right-click on the "Bulk Mail" folder and hit properties in the pop-up menu.

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. hat do I d

I wish to reinstall Adobe Creative Suite 6 Design Standard on a replacement PC using the original box CD and Serial Number. Website says SN is valid but cannot find corresponding Adobe product. My product is not on the drop down list offered. What do I do next?

Contact support by web chat.
Mylenium

I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

I accidentally threw away the box with my serial number before registering the product. I am new to adobe so I didn't realize I would need it. Is there a way to track down my number?

Barbara B. wrote:
There is one faint glimmer of light. Depending on where you bought PSE you might have gotten a redemption code rather than a serial number. If you didn't also throw away your receipt, check that for a code. Then go here, if you find one:
Redemption Code Help
But otherwise, I'm afraid you are out of luck, sorry.
Barbara,
It has been months since I visited here. Your patience is still intact! I have your wonderful PSE 11 book on my Kindle now. Thanks for the good work.

Which number on the back of my product box is the serial number?

Which number on the back of my product box is the serial number? When I try and register my product, Adobe will not accept any of the numbers!

Hi Mimi7,
Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
Regards,
Romit Sinha

TS3899 I can't find the 'sync settings' in the mail settings to limit the number of emails in my account

I can't find the 'sync settings' in the mail settings to limit the number of emails stored on my ipad.

That option depends on what kind of mail account it is. On an Exchange account, go to Settings > Mail, Contacts, Calendars > Tap the account and you should see "Mail days to sync." If that option isn't there, you won't be able to change it. You could always clean up your inbox on the server.

I have tried serveral times to download an online purchase of Adobe Creative Suites 6 after getting e-mail notification of the serial number for the product

I have tried several times to download Creative Suites 6 without success after getting e-mail notification of the serial number. I went through the download process by I cannot find the files on my computer and the installer app. does not download

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

The class I am teaching starts Monday and I cannot wait for snail mail return of my serial number. M

The class I am teaching starts Monday and I cannot wait for snail mail return of my serial number. My product code is <removed by mod, kglad>. What help can of give me?

contact adobe support, http://helpx.adobe.com/contact.html?product=flash&topic=using-my-product-or-service

Mail messages are marked "junk" in the outgoing mail box

For some time all my outgoing email messages have been marked as "junk" in the sent mail box. Today found that if I do not mark my personal information in my address book as "Me" my sent messages are no longer marked "junk". Does anyone know how I can fix the problem so my personal information can be marked "Me"?
iMac intel Mac OS X (10.4.8)
iMac intel Mac OS X (10.4.8)

The following procedure thoroughly gets rid of all the files used by the junk filter, so that Mail creates them anew, and should fix the problem in the cases where the simple procedure provided in my first post doesn’t:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/.
3. Locate LSMMap2 and move it to the Trash. This file stores information about what does and doesn’t constitute junk, and allows the junk filter to learn. Deleting this file is what Preferences > Junk Mail > Reset does. The file was called LSMMap in early versions of Mail; delete that as well if you see it.
4. Locate any MessageRules.plist (Mail 2.x) and/or MessageSorting.plist (Mail 1.x) files and move them to the Desktop. This is where Mail stores all the rules, including the rule that governs what the junk filter does.
5. Locate DefaultCounts and move it to the Trash. This file keeps statistics about the number of messages that have been marked as junk, either automatically by the junk filter or manually by the user.
6. Look for the account folders. The name of each account folder starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. Open each of the account folders, locate the Junk.mbox or Junk.imapmbox folder within it, and move it to the Trash if present.
7. Go to ~/Library/Mail/Mailboxes/. Locate any Junk.mbox mailboxes there (their name may include the account name in parenthesis), and move them to the Trash.
Note: Steps 5, 6 and 7 may be unnecessary. Also, messages in Junk mailboxes with an .mbox suffix are stored locally and will be lost forever as a result of doing steps 6 and 7. If there is a chance that you have legit messages there that you want to preserve, either try skipping those steps, or move the messages to another mailbox in Mail first, or move Junk.mbox to the Desktop (to be imported back later) instead of to the Trash. Junk mailboxes with an .imapmbox suffix aren’t a concern because they are stored on the server and Mail would rebuild them automatically.
8. Open Mail. As a result of removing the rules file, the junk filter will be disabled now. You may want to either tell Mail to go offline immediately after opening it, or shut down the Internet connection before opening Mail, to prevent it from downloading anything until the junk mail filter has been enabled again.
9. Go to Mail > Preferences > Junk Mail, enable junk filtering, and configure it however you wish.
10. Go online again if you went offline in step 8.
If the above solves the problem and you don’t have any rules you’d like to preserve or recreating them is not a daunting task, just trash the rules files that were moved to the Desktop and be done with it.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Unity mail box aging policy

I need to change the current Mail box aging policy for an existing system. If I reduce the current set up how does it effect existing "deleted" messages? Does it delete all existing ones or does it only delete new ones from the date of the change as with changes in Template/COS?
Also I need to change the alarm threshold is there a best practice based upon the size of the hard drive- % wise ?
thanks

Hi -
The default mailbox message aging policy is Enabled for Deleting voice messages automatically in the Deleted Items folder. "Permanently Delete Messages in the Deleted Items Folder in 15 Days"
So unless you have disabled this rule, voice messages are already getting deleted. You may want to check here.
When you enable the policy for a specific number of days, the timestamp of the message is used for calculating, based on
how the user marked the message as new, resaved the message, deleted the message, or restored a deleted message as saved from the phone interface, called the "modification time". So if you change it to 90 days, voice messages older than 90 days will be deleted the next time the scheduled task "Clean Deleted Messages" runs, which is every day, every 30 minutes. From Cisco's Unity Connection 8.5 System Admin guide, "If you only need one set of message aging rules, you can change the specifications for the default message aging policy and assign that one policy to all users and all templates. If you need to allow some users to retain messages longer than other users, you can create additional policies and assign different policies to user templates and to individual users. If you want to send message aging alerts to some users and not to others, you can create additional policies that include aging alerts. (Message Aging Alerts are available only in Cisco Unity Connection 8.5 and later.)". You might have "privileged" users, i.e. Managers that you want to protect and configure a different policy for these users.
Hope this helps! Ginger

Role oF Mail Box, ANA Number & TUN Number

Similar Messages

Maybe you are looking for