Rollback all steps in a mapping if an error occurs

We have a mapping with some different steps (pre-mapping procedure, some operators and post mapping procedure) and we want to commit or to rollback the entire mapping transaction. So we have that all is OK or all is not refreshed in this mapping. Which parameters we have to configure (Maximum number of errors: 1, Commit frequency: 0, ...)?
Thanks.
Alessandro

You should probably make sure that the pre-mapping does not have commits (that should be easy). Also don't do DDL in there!
Then set the commit frequency to large, or even better, make sure the mapping runs in set based mode. That means any error rolls back the stuff (be sure to set this to SET BASED ONLY, otherwise we will do row-by-row and commit stuff).
Make sure that the post mapping does NEVER run (e.g. configure this to only run on success of the main mapping body).
That should do the trick.
Jean-Pierre

Similar Messages

  • Step-by-step custom Credential Mapping using weblogic 10.3 SSPI

    Folks,
    I am trying to implement custom Credential Mapping using weblogic 10.3 SSPI. Am sure that few of you have already implemented the same. But here my questions in reagrds with the implementation
    Right now, I have below
    1.MyCredentialMapperImpl implements CredentialMapperV2
    1.Overridden getCredential and gerCredentials method.But I am not sure what are all the other methods , I should implement here.
    2.MyCredentialMapperProviderImpl implements CredentialProviderV2
    Questions.
    1.How to get ContextHandler to pass as param in MyCredentialMapperImpl -->gerCredentials method.
    2.Should I need set up a database after deploying the MBean ?
    3.How do I execute above implementation ?
    4.Can I see the SAML Token in my client ?
    If possible Please send me the step-by-step custom Credential Mapping implementation.
    Thanks in advance.
    Ravi

    Hi John,
    I would like magic of course. However, in this case I want something special: my authentication provider uses special means and contents of headers, cookies and service from external identity management systems to determine the user's identity.
    I do not want the application to present the login dialog! I want to derive the identity and the fact that the user is logged in from whatever the authentication provider returns in terms of Subject.
    Ideally, the flow is something like:
    - user accesses an unprotected resource - resource is shown, no interaction with authentication provider
    - user presses a link or button that takes him/her to a protected resource
    - the authentication provider is contacted to work with the identity asserter to establish the identity of the current user and create a subject object for this user
    - the application can access the subject and principals
    - ADF Security recognizes the identity and the roles (based on the principals) and coordinates access based on this.
    the authentication method is client certificate. presumably this prompts WebLogic/OPS to use an identity asserter to work with custom headers and cookies ("... when you configure a web application to use CLIENT-CERT authentication. In this case, WebLogic can perform identity assertion based on values from request headers and cookies. If the header name or cookie name matches the active token type for the provider, the value is passed to the provider."). No login form should be presented to the user, as all information required to perform the authentication is already available.
    I am trying to understand what I must do to have the ADF application adopt the subject set by the authentication provider - if anything?!
    If you more ideas to share - I would love to hear them.
    best regards,
    Lucas

  • What all steps required in IR and ID?

    Hi Experts,
    Could you please tell me, what all steps required in IR and ID for the webservice (SOAP Adapter) - XI - JDBC Adapter synchronous scenario.
    Do we have any blog for this scenario( Beginner level)?
    Regards
    Sara

    Sara,
    The scenario in terma of Integration Respository will be like say a HTTP to JDBC .
    1. Create Dataytypes for request and response of SOAP and JDBC respectively.
    2. Create Messagetypes.
    3. Create Message Interfaces ( One Synch Outbound for SOAP and Oune Synch Inbound for JDBC).
    4. Create 2 message mappings and interface mapping.
    The datatype you create for the JDBC depends on the Action you want to perform on the Database.
    Do you want to Insert or update or delete or select data from the database?
    Look into this link for the datatype formats,
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    Also in ID will be the same with 1 receievr determinations, 1 interface determinations , 1 sender SOAP adapter,1 Receievr JDBC adapter amd Sender and Receiver Agrreements.
    Finally you need to expose the Outbound Messgae interface as a webservice and to do this, look into section 3.2.2 of this article,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    Regards
    Bhavesh

  • Interface is successfull but not all steps.

    I have imported an Interface from Repository A to Repository B. After this it's executing successfully in Repository B but not all steps. Due to this, the target table is not populating. Here is what I did.
    1. Created a master repository MA and work repository WA
    2. Developed the interface.
    3. Run the interface. It's working properly. See the snapshot at
    http://www.flickr.com/photos/uday_sunrise/478322469/
    4. Exported everything from here to files.
    5. Created a master repository MB and work repository WB
    6. Imported all the exported files in step 3 here in Synonym INSERT_UPDATE mode.
    7. Run the interface. It's completing successfully(without errors), but not completing all the
    steps. Due to this my target table is not populating.
    See the snapshot at http://www.flickr.com/photos/uday_sunrise/478322473/
    Please help where is the mistake.
    Thanks,
    Uday

    Take care of these things while you Import the Interface from one Repository to another.
    1.) u follow the import step wise
    First import the physical schemas.and map them to logical schame with samename and context as in previous repository.
    Then,import the models in designer that are to be used in your interface.
    Finally Import the Interface.One Important Thing to mentio here is that any mapping(in Diagram Tab) in an Interface needs to be done again.
    Your Screenshots are not visible .

  • Help--Mapping multiple steps within ONE map in OWB 9.04 -

    Hello all
    I want to consolidate all the steps in one mapping. The following steps need to be conducted:
    1. Import a flat file to become a external table (2 or more)
    2. Map these external tables to apply some filter, cleansing process and then write the result another flat file.
    3.From number #2 flat file result , I will map to a warehouse oracle tables.
    Your response greatly appreciated

    Since you are writing to a flat file target as an intermediate step, you might have to split the mapping in in two.
    Two questions:
    - Why do you want to have everything in one mapping? It might be better to have more than one mapping and then consolidate the process in a workflow that will contain them all. You could the define the dependencies and operation sequences between the mappings in the workflow.
    - Why are you using a flat file as an intermediate step instead of a staging table?
    Regards:
    Igor

  • Is there a way to restart an indvidual step in a map ?

    Does anyone know how to rerun just a particular step in a given map ? The purpose is to allow flexibility when building maps - so that if an error occurs with a single step - then you can just restart that step instead of the entire map.. That way I can have multiple INSERTS in one map and not have to rerun all of them.
    thanks
    OBX

    You want to add an Input parameter box from the palette. There you can add a field as numeric.
    When you run the mapping, make sure your preferences are set to prompt for input parameters.
    In my case, the input parameters are always defaulted to true. The only time I would change them is when I am running a mapping manually (i.e. from Design center).

  • All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

    I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
    Please suggest a solution.
    Thanx in advance.
    Edited by: Aritra on Nov 28, 2011 11:37 AM

    Hi,
    i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
    so to resolve this error just remove  changes you manually did. or remove that code and again create start routine and paste the code which u need.
    Thanks & Regards,
    NIKHIL

  • How to delete all favorites in here maps at once?

    How can i delete all favorites in here maps at once? On my Nokia lumnia 920 maps is not working due long synchronisation time.
    Arnold
    Solved!
    Go to Solution.

    Do not see any option to do that at once.. You need to delete them one-by-one ...
    What if you go to settings (in Maps on your device..) and set 'Synchronise favourites automatically' to OFF? 
    Other work around is to create a fresh account at here.com and use that as Nokia account on your phone..

  • I have updated to windows 8.1 from windows 8.  My ipod nano (6th gen) is no longer identified properly in itunes.  I have tried all steps in the troubleshooting guide but it has not resolved the issue.  What can I do?

    My ipod nano (6th gen) is no longer identied properly in itunes.  I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved.  What can I do?

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • Ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    Does it light up at all? If not, you could have a battery issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • HT201272 itunes was on mac book that crashed.  Did all steps to download purchased music onto new computer.  Only part of my purchased music was transferred to new computer.  Can't recover remainder of purchased music.

    itunes was on mac book that crashed.  Trying to move music and podcasts to wifes windows 7 pc.  Followed all steps for importing purchased items.   Only a portion of purchased music was transferred to new computer.  What to do???

    JustMeAndYou,
    For what it's worth ...
    Apple's policy is clear: iTS purchases can be downloaded only once. It is your responsibility to make back-ups . (For most people, this will involve either CD's/DVD's or an external drive .)
    That being said, at their discretion they have made one-time exceptions to this policy. You can ask for an exception by submitting the form on this page:
    http://www.apple.com/support/itunes/store/browser/
    Good Luck! But whatever the response from Apple, remember:
    Your music is valuable - please back it up!

  • I just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    i just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    sorry my english is very cash I think we got the paper on the lock operator and we have done all the steps but it will not play if it is unlocked, bought locked to three paid 350kr

  • HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Try:
    iTunes: Finding lost media and downloads
    iTunes: How to re-create your iTunes library and playlists
    Next try:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Also:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

    I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
    like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
    You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
    As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
    That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Crashed thrice today. Followed all steps recommended etc etc - if Mozilla were a car, it would be recalled - get it in gear!

    Followed all steps in these threads - no hardware acceleration, disabled plug ins - even ran w/out adobe or java enabled and PLEADED for a response in crash reports - nada zip zero - I like the privacy controls of Mozilla but this is starting to interfere with productivity.

    Hi angry_user, thank you for the update.
    I'm not sure how NoScript was involved, but because many sites split their scripts between different servers, perhaps they went haywire when some of the scripts did not load. ??

Maybe you are looking for