Rollover in Dynamic List?

HI everyone, I have a search results page which returns 10
results per page. I would A. like an alternate coloured background
per line and B. to change to a third colour on mouseover returning
to original on mouseout.
Can anyone advise me as to the best way to do this. I am
using ASP, MySQL and Dreamweaver MX.
Thanks in advance
JohnA

Create the table and repeating region, and check it works ok,
then in code
try replacing the single TR tag at the start of the row with
all of this:
<% If rowcolour = "pink" Then %>
<tr bgcolor="#FFCCFF"
onmouseover="style.backgroundColor='#CCCCCC'"
onmouseout="style.backgroundColor='#FFCCFF'">
<% rowcolour = "yellow" %>
<% Else %>
<tr bgcolor="#FFFFCC"
onmouseover="style.backgroundColor='#CCCCCC'"
onmouseout="style.backgroundColor='#FFFFCC'">
<% rowcolour = "pink" %>
<% End If %>
The rowcolour names are just variables, the HEX values are
what you'll need
to change. Be careful of editing - watch the single and
double quotes.
HTH,
Piers

Similar Messages

Referencing a "checked record" from my ADDT Dynamic List using a SPRY Menu

I have just posted a Beta of my site to:
http://www.clearwave.biz/Beta/T1COElogin.cfm
- Username is: Beta
- Password is: 123
- Once you are logged in you should see the ADDT list w/one
order listed.
- Click on the Printer icon & the Order Agreement will
open in PDF. (this works fine)
- Click on the InfoSheet link & the Report will open in
PDF as well. (this works fine)
- Everything works fine if you use the links on the same line
as the record.
- But if you check the CheckBox on the left, then choose the
Spry Menu above, Reports/T1 Agreement the report will not work?
Question: What should the Link be to reference the checked
item below, pass the CustID value to the report & print the
PDF?
(Note: the CF report has the following line in the SQL:
(tblT1OrderProcessing2.T1CustID = #param.T1CustID#) and the report
prints fine in Report Builder if I pass it the T1CustID, as well as
if I click the links on the same line as mentioned above, so this
is just an issue of grabbing the CustID value from the checked line
& passing it to the report link in the Spry menu)
Here is a visual picture of my Dynamic List page:
http://cerberus.clearwave.com/jerry/Order_Management_Main_Page.jpg
Thanks in advance for the help,
jlig

Here is the Report URL that works perfectly when clicking the
Printer icon on the right of my List:
http://www.clearwave.biz/Beta/reports/T1_Service_Agreement.cfm?T1CustID=1508
and the link to the InfoSheet:
http://www.clearwave.biz/Beta/reports/T1_Information_Sheet.cfr?T1CustID=1508
Both of these work perfectly by grabbing the T1CustID value
of 1508 from the line.

Dynamic list of values in CR 2008 - request of login to database

I am using CR2008 with VB2005. I created simple application which generate report on different SQL Server 2005 databases.
Report uses OLE.DB connection to SQL Server, I pass logon information in VB using "SA" username and password. The same simple report works great on different databases with one exception: if parameter (dynamic list of values) is used in report it runs correctly only on database it was created (connection to this database is saved in report and can be seen in Database->Set Datasource Location). Changing connection to other databases in VB during runtime causes CR to ask for username and password (in standard parameter window). It looks, like Crystal have one connection for report and the other for dynamic list of values parameter. I pass connection information to report using ConnectionInfo(). I loop through alll tables in report and apply connection:
For Each crTable In crTables
 crTableLogOnInfo = crTable.LogOnInfo
 crTableLogOnInfo.ConnectionInfo = crConnectionInfo
 crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
I tried to pass connection information also to parameter but I couldn't find such possibility.

This is a known issue (Tracking number is ADAPT01333806.) and a note has been written, unfortunately it is not yet published. Below is the note content, including a work-around / resolution. You may also want to try FP 2.3, see that helps. (I'll break this post into two as I'll loose the formatting if I don't.
Reproducing the Issue
Use Crystal Reports 2008 SP2 to create a report with dynamic parameter(s)
Use the following code from the Crystal Reports SDK for VS .NET
Dim crDatabase As Database
Dim crTables As TablesDim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
crReportDocument.Load("<path>")
crReportDocument.Refresh()
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
 .ServerName = "<New Server Name>"
 .Password = "<password>"
End With
crDatabase = crReportDocument,Database
crTables = crDatabase.Tables
For Each crTable In crTables
 crTableLogOnInfo = crTable.LogOnInfo
 crTableLogOnInfo.ConnectionInfo = crConnectionInfo
 crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
CrystalReportViewer1.ReportSource = crReportDocument
The above code works with Crystal Reports 2008 SP 1

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

Dynamic List and Security Issue

Hi
I have a Dynamic List Wizard for orders, which the user can click on edit to edit or modify the order and if the user choose "Yes" to submit ( the order form has a submit filed which has Yes / No Values)then the EDIT button disappear and the user has no more control on the record(using show if conditional Region server behavior).
- Now i noticed that when i click on the edit the address bar includes the (www.mysite.com/form.php?order_id=1) now say the order Number 2 is already submitted (still on the list but no Edit button for it) if i write 3 or 4 or any other number instead of 1 at the address bar (www.mysite.com/form.php?order_id=3) the record which has the order number 3 displays on the screen and then you can edit it and when click update the Edit Button becomes Active which destroy the whole concept.
so, how to fix that?

Hi Lorie,
Taking it a step further
interesting that you´re mentioning this -- because I was just in the middle of finding a workaround for the very same issue ;-)
I actually did find a pretty easy solution, which basically goes like this:
1) wrap the whole table *plus* any possibly added hidden fields located below this table in a "Show IF conditional region" behaviour -- but make sure to *not* include the buttons within the "KT_bottombuttons" div in here.
2) as I assume that your "supplier_name" column holds a numeric value which equals the user´s "kt_login_id" Session Variable (which it should !), define the following conditions for the "Show IF conditional region" behaviour:
Expression 1: choose "supplier_name" from the tNG recordset
Condition: ==
Expression 2: choose Session -> kt_login_id
3) tick the Has ELSE option
4) confirm with OK
5) replace the default "has Else" message with something meaningful like "you can´t edit this record !"
Switching to Code view and navigating to the very start of your "Show IF conditional region" should display something like this:
if (@$row_rsqueryname['supplier_name'] == @$_SESSION['kt_login_id']) {
When viewing the modified Dynamic Form in a browser, you´ll note that this solution will indeed display the form instances for all "authorized" records, whereas those form instances which don´t match the required credentials will be replaced with that "has else" message.
BUT !! This solution has one major drawback which I haven´t been able to resolve yet :: when the Dynamic Form goes into Insert Record mode
(means when you click the "add new" link in the Dynamic List), all inner form instances will display that "has else" message.
The only workaround I currently can come up with is to have the List´s "add new" link point to a separate "add_new.php" page that´s going to insert a single record.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Dynamic List to Update Field in Record

Hello,
I have created an Update page in CS5.5 and have added a dynamic list to update a field in the record. Now I am stuck. How do I modify the code in the menu to have it update the field?
<select name="cemeteryID">
<?php do { ?>
<option value="<?php echo $row_cemeteryList['cemeteryID']?>"<?php if (!(strcmp($row_cemeteryList['cemeteryID'], $row_cemeteryList['']))) {echo "selected=\"selected\"";} ?>><?php echo $row_cemeteryList['cemetery']?></option>
 <?php
 } while ($row_cemeteryList = mysql_fetch_assoc($cemeteryList));
 $rows = mysql_num_rows($cemeteryList);
 if($rows > 0) {
 mysql_data_seek($cemeteryList, 0);
 $row_cemeteryList = mysql_fetch_assoc($cemeteryList);
?>
</select>
Thanks!

I figured it out. Suprised that no one responded - oh well.

Dynamic List Wizard error - can't connect to recordset or table

I'm using Windows Vista, CF 8, and DW CS3.
I have just started working with the Dynamic List Wizard and cannot get it to work. I have tried both options: get data from recordset, and get data from table. When I click on "finish" I get the following error message: Please select a connection that contains tables for updating, or click cancel.
Everything appears to be good to go. I've refreshed my recordset, my database connections, etc. Has anybody else had this issue and what is the workaround?
Also, is there a tutorial out there ANYWHERE for this part of the extension? Interakt had such great Flash demos ... what's up with Adobe? No Flash demos for this extension?
Thanks!

Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. This is an example of what can happen. If the NAS doesn't work, your only recourse is to the manufacturer (which will blame Apple.)
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or a mini-tower (802.11ac) AirPort base station. Only the 802.11ac base station supports Time Machine, not any previous model.

Dynamic list of .Mac Web Gallery into iWeb

Hi guys,
I would like to know we can incorporate a dynamic list of all my .mac web galleries so that it appears in iWeb.
For example, in my .mac gallery, I have these four galleries:-
1. Picnic shots
2. Wedding shots
3. Pet shots
4. Zoo shots
I want this entire list to be shown in iWeb, and it should be dynamic in such if I change the title of the gallery, it changes in iWeb as well. Or when I modify and add new galleries in my .mac , it should be reflected in my iWeb.
I just want the list to appear, not the gallery widget. Thanks!!

Assuming it's possible to do at all outside of Apple, I suspect that it would require some sophisticated programming on the server where your site is hosted. If you are hosted on .Mac, I doubt such programming is possible. However, if you are hosted on a non-.Mac server, perhaps someone here can suggest an approach.
Possibly Apple will provide that feature in a future version of iWeb and you can request it via this feedback form:
...in +Feedback Type+ choose +Enhancement Request+.
Meanwhile, you've probably guessed already that the non-dynamic solution is to set up text hyperlinks in iWeb to your Galleries and update those links manually as necessary.

ADDT Dynamic List with Session Variable?

I've created a dynamic list using ADDT. When a member logs into the site I want the member to see only his or her specific information in this list. How do I create a session variable that allows only the logged in member to see there specific information in the list?
 
 <%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
 

 

 

 

 

 <% ' Filter Dim tfi_listLandLordRentalProperties3: Set tfi_listLandLordRentalProperties3 = new TFI_TableFilter tfi_listLandLordRentalProperties3.Init MM_rentalpaypro_STRING, "tfi_listLandLordRentalProperties3" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.memUserName", "STRING_TYPE", "memUserName", "%" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.StreeNumber", "NUMERIC_TYPE", "StreeNumber", "=" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.StreetName", "STRING_TYPE", "StreetName", "%" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.AptNumber", "NUMERIC_TYPE", "AptNumber", "=" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.City", "STRING_TYPE", "City", "%" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.State", "STRING_TYPE", "State", "%" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.ZipCode", "NUMERIC_TYPE", "ZipCode", "=" tfi_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.RentAmount", "NUMERIC_TYPE", "RentAmount", "=" tfi_listLandLordRentalProperties3.Execute() ' Sorter Dim tso_listLandLordRentalProperties3: Set tso_listLandLordRentalProperties3 = new TSO_TableSorter tso_listLandLordRentalProperties3.Init "rslistLandLordRentalProperties3", "tso_listLandLordRentalProperties3" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.memUserName" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.StreeNumber" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.StreetName" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.AptNumber" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.City" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.State" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.ZipCode" tso_listLandLordRentalProperties3.addColumn "LandLordRentalProperties.RentAmount" tso_listLandLordRentalProperties3.setDefault "LandLordRentalProperties.memUserName" tso_listLandLordRentalProperties3.Execute() ' Navigation Dim nav_listLandLordRentalProperties3: Set nav_listLandLordRentalProperties3 = new NAV_Regular nav_listLandLordRentalProperties3.Init "nav_listLandLordRentalProperties3", "rsLandLordRentalProperties1", "../", Request.ServerVariables("URL"), 10 %>
 

Hi,
when you use the dynamic list ..
it creates a SQL query..
change it ..,
add the param ( your session variable to it)
hope this helps
regards
mohnkhan
http://www.mohitech.com

Dynamic list to generate url variable

Hello, I am using a dynamic list to pull product codes from a
database. I then want to pass the code into a url variable when it
goes to the results page. This is so customers can chose which code
they want to go to a detail page about. I already have the dynamic
list working, I just can not figure out how to embed the selected
code into a url variable. For example I want it to do the
following:
sitename.com/search.php <--- here is where you start and
make the selection then it brings you to:
sitename.com/details.php?code=202 <---- code202 was
selected on previous page in dynamic list.
I know how to do it by pulling results from a database and
generating links for each one, but I need to do it from a dynamic
drop down list.
Here is the coding that I was trying to use:
Thank you for your assistance.

Sorry, dumb error on my part. Used method=post rather then
get.

How do I add a time field to a dynamic list and form?

I'm trying to create an update form that logs when an action was taken. Among the fields are one for the date and one for the time, but I've not been able to get the time field to display or enter data correctly.
I've set the time format in the ADDT preferences (database date and time format is yyyy-mm-dd and HH:mm:ss and screen format is dd/mm/yyyy and HH:mm). When I create the list or the form using the wizard, there is no option to display the field as a time.
In step 3 of 4 in the Dynamic List Wizard, the 'Display as' options are: text, numeric, double and date. Choosing date for the time field gives me a display as though it was a date (I get '00/00/0000'). I have the same problem with generating a Dynamic Form in that there is no option to display a time, only a date.
Am I able to do this using the wizard, or is there another way that I'm, missing? Thanks for any help.

If those date/time fields are only needed for logging purposes then follow Günter's instructions.
If you need to be able to edit those two fields and have their values displayed properly then there are several steps you should take.
First open the page that uses the Dynamic List behavior and make sure that all date and time fields are configured to display as dates. Then open the page with the dynamic form and click on "Manage Dynamic Form Wizard" in the Developer Toolbox. Configure your date and time fields to submit as dates. Then go to the Server Behaviors panel and double click on "Validate Form". You should now have 3 date/time options available under Validation Format: Date, Datetime, and Time. Configure each field as needed.
This will ensure that date and time fields are saved in the proper format so that when you view their values they will be displayed properly, that is dates will be displayed as dates and times as times.
There are also several additional server formats available that are accessible through the Bindings panel that you might want to experiment with.

Unable to use #A01# substitution variable in dynamic list

Greetings...
I am attempting to generate a dynamic list on the page. The list will contain a flag indicating whether the list entry is actually hidden to the user or not. If it is hidden to the user, then I want to apply a particular class to that list entry when rendered.
The dynamic list has the following SQL:
SELECT null lvl,
 menu.menu_nm label_value,
 q'!javascript:$s('P32_MASTER_MENU_ID', '!' ||
 menu.menu_id || q'!');!' target_value,
 null image,
 null image_attribute,
 null image_alt_attribute,
 case when menu.hidden = 'Y'
 then 'class="hiddenNode"'
 else null end attribute1
from ( select 'N' hidden, vis.* from std_vw_apex_menu vis
 union all
 select 'Y' hidden, hid.* from std_vw_apex_menu_hidden hid ) menu
where menu.menu_ty = 'MAINMENU'
order by menu.sort_order
I am then using a list template with the following as the "Current" list entry:
<li class="active"><a href="#LINK#">#TEXT#</a></li>
... and the following as the "Non-Current" list entry:
<li><a href="#LINK#">#TEXT#</a></li>
The result I see in the rendered page however is that the substitution is not happening, as indicated in the following snippet :
<li><a href="javascript:$s('P32_MASTER_MENU_ID', '18893191201');">Education</a></li>
We are on ApEx 4.2.1. What am I doing wrong as I've seen other threads indicate that it is possible for dynamic lists to use substitution variables in their list templates.
Shane.

I found the solution at Attribute substitution not working in templates for dynamic lists.

Using variable in dynamic list queries

How can we use a variable value like metadata value of the parent content in the dynamic list query?
I tried something following ways but the query was not picking up the value of xCountries.
dDocType <matches> `State` <AND> xCountries <matches> xCountries
dDocType <matches> `State` <AND> xCountries <matches> `xCountries`
dDocType <matches> `State` <AND> xCountries <matches> `$xCountries`
dDocType <matches> `State` <AND> xCountries <matches> ``
None of them worked. But when I printed the  on the secondary page for the selected country the value is getting printed.
Regards,
Pratap

Hi Bex,
You were right. Eval function call was helpful here.
The problem was resolved only to an extent by using the eval function. This is
evaluating the query string given in parameters window for ssQueryText to
correct value. We used the eval() function in the dynamic list fragment. The
format of query we were trying earlier was incorrect. The correct format is like
this
dDocType <matches> `City` <AND> xCountries <matches> `<$xCountries$>` <AND>
xStates <matches> `<$xStates$>`
There is another problem though. We are able to add new states or cities by
going to the specific state page or to the cit page and then edit it. But if we
click edit on a secondary page e.g. on a State page(which contains list of
cities) the correct values for cities are not getting populated in the Cities
dynamic list in state edit window. Possible cause is that the eval function is
not called in the edit window (which shows all applets), instead the eval
function is called only in dynamic list fragment which is evaluated in the
secondary page template for State. How can we make the eval function execute in
the edit window as well?
In fact the query is failing from paramters window itself. If I use Test Query
it is returning 0 results.
Is there a work around to address this problem? Hope I didn't confuse much.
Regards,
Pratap

Attribute substitution not working in templates for dynamic lists

Hi all,
dynamic lists were introduced in APEX 4.1 and they can be used for drop-down menus. I am trying to use attribute substitution #A01#...#A10# in the templates without success.
Here is a sample select statement
<pre>
SELECT level,
short_title label,
'f?p=myapp:1:0::::MYAPP_ID:'||id target,
'NO' is_current,
NULL image,
'm'||TO_CHAR(id) attribute1
FROM mytable
START WITH parent_id = :MYAPP_ROOT_ID
CONNECT BY PRIOR id = parent_id
ORDER SIBLINGS BY seq_in_parent
</pre>
and here a snippet from the template
List Template Noncurrent
<li class="dhtmlMenuItem"><a id="#A01#" href="#LINK#">#TEXT#</a></li>
The substitution is not being made. It looks like a bug but maybe I'm missing something.
Any help would be greatly appreciated.
Regards Garry

Hi Garry,
When the list query is parsed, it's not the column alias that deciphers which parameters you're trying to set, it's the positioning of the parameter in the query itself. So, for example, if a user wishes to set the #A01# attribute, like in your case, then the value returned by the 8th parameter in the query will be used. In your original query, you only supplied 6 parameters i.e. up to the image attribute setting. If you're not setting anything for the image attributes, then you simply set those values to null. The syntax for the query should be similar to the following:
select level,
 labelValue label,
 [targetValue] target,
 [is_current] is_current_list_entry,
 [imageValue] image,
 [imageAttributeValue] image_attribute,
 [imageAltValue] image_alt_attribute,
 [attribute1] attribute1,
 [attribute2] attribute2,
 [attribute3] attribute3,
 [attribute4] attribute4,
 [attribute5] attribute5,
 [attribute6] attribute6,
 [attribute7] attribute7,
 [attribute8] attribute8,
 [attribute9] attribute9,
 [attribute10] attribute10
from ...
where ...
order by ...Regards,
Hilary

Dynamic List Populate in Tabular Report

Hi All,
Could anybody help / advise me out in getting done the following requirement in Oracle APEX 4.1. I tried using AJAX / visited DENES KUBICEK application but its getting complicated with AJAX. Any quick inputs will be highly appreciated
I would like to implement dynamic list in Tabular Column. Here is a typical example; If there are two list Deptno LOV, Employee Name LOV. Based on the department number selected, Employees pertaining to that department should be populated.
Thanks,
Ahmed

Thanks a ton your kind advise Scott. I tried following up the same somehow not getting through. I have created the sample application in the following workspace under cascade lov tab following the same steps. Any correction will be of great help. Many Thanks again.
Workspace Name: apex_app_tst
username/passwd: test/test
http://apex.oracle.com/pls/apex/f?p=1847:2:100801961610213:::::

Rollover in Dynamic List?

Similar Messages

Maybe you are looking for