Rollover state not working in tooltip

I am having an issue getting a rollover to work correctly in a tooltip. The action is fine but the rollover just doesn't work. You can see an example of it here: http://grosteffon.site90.com/index.html
The buttons in question are "Material Testing" and "Proficiency" Any help at all would be appreciated.

The rollover works in the fact that it triggers the submenu. Aish, do those two buttons change color (rollover state) like the other buttons? That is what I can't get to work.
Thanks!
Scott

Similar Messages

Link to frame in button rollover state not working..

Hi guys,
What I use: Flash CS5 & Actionscript 3
So I had my buttons working just fine and linking to a frame. But after adding a rollover state in which my button has grown in size it no longer links.
Does anyone know how to get my buttons linking in their rollover state?

var someObject:MovieClip; // this is declared - only
var someObjectMovieClip = new MovieClip(); // this is declared and instantiated
Make sure your code uses aghains and not instancename like your code shows.
I don't think you understand the third and fifth items I listed either. The third is saying that the code is not in the same frame as the item it is trying to target. The fifth has to do with objects in consecutive frames, not linking.
If you followed what I mentioned in the last sentence you should have a line number indicated in the error message that will tell you which line is causing the problem. Whatever line that is, the object doesn't exist as far as the code sees it. So if it was the line...
instancename.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_28);
I can guarantee you that there is no object named instancename in the frame where you have that code since it is the only object targeted in that line of code.

Rollover states not working when published online. Suggestions?

I have created rollover states for image navigation. Works great in preview. Works great when published to desktop. I have uploaded to FTP site. Some of the rollovers work, others do not.? I have replaced and re-uploaded, still not working. The normal and active states all work, but the rollover state vanishes. The images are in the image folder. The css pages do have the code to swap the images. Same issue in Chrome, Safari, Firefox, and on ipad.
What am I missing? Thank you for your help!

What's the URL?

Rollover state not working on active state

Hi, I have a problem with menu states. When a menu item is in its active state the rollover state isn't working. Is this supposed to happen or is there a solution to this?
Thanks.

Hello,
This is working as designed. Active state suppresses changing to any other state on mouse interaction and other states only work on links that are currently in Normal state.
Also refer: https://forums.adobe.com/thread/1136562
Cheers,
Vikas

Rollover state not working on type

I have type that is supposed to act as a hyperlink. I've enabled it, and selected the color, etc. It looks fine in iweb, but when i publish it, there are no rollover states at all.
The only thing I can think of, is that i've put a drop shadow on the type, thus making it "art". Would that have anything to do with this issue?
Thanks

Yes. Adding a drop shadow to the text converts the text box to an image file. The rollover features don't work on an image used for a hyperlink.
OT

Menu bar with rollover states not working properly

I have a menu bar that I want to have as a certain size. The
menu items that actually link somewhere are not showing up as the
designated size (150x50px) but the one link that is not linked to
somewhere else in the page looks fine (inventory).
Can someone look at the css and tell me if there is something
contradicting or if there is something I can do?
THank you
You can view the problem page at
http://thebradfordcreativegroup.com/abs/indexold.html

Sorry, I don't have the answers - but you need to see your
site in IE6. It
looks quite different - kind of bloated. Also, the "Quality"
link doesn't
have an arrow.
"Inventory" as you say sits up at the top. FF is fine. Sorry
I can't help
though.
Jo
"joshuataylordesign" <[email protected]>
wrote in message
news:fqia5f$anb$[email protected]..
>I have a menu bar that I want to have as a certain size.
The menu items
>that
> actually link somewhere are not showing up as the
designated size
> (150x50px)
> but the one link that is not linked to somewhere else in
the page looks
> fine
> (inventory).
> Can someone look at the css and tell me if there is
something
> contradicting or
> if there is something I can do?
> THank you
> You can view the problem page at
>
http://thebradfordcreativegroup.com/abs/indexold.html
>

Select statement not working

hi to all,
I am trying to write use inner joining . here is code
DATA:tabname LIKE dd02L-tabname,
     table_disc LIKE dd02t-ddtext.
SELECT dd02ltabname dd02tddtext INTO (tabname,table_disc)
    FROM dd02l INNER JOIN dd02t on dd02ltabname = dd02ttabname
          WHERE dd02tddlanguage = 'E' AND dd02ltabclass = 'TRANSP'
                            AND dd02L~tabname = 'ZANKI*'.
    endselect.
      write : tabname.
I also checked in tables dd02t and dd02l for the table zanki* and data available in both table . but here select statement not working .do u have any idea about this. thank you

Hi,
I executed the ur inner join conditin by commenting 'z*' it's working fine.
I think where condition is not getting satisfied so u r not getting any data.
Please conform in where condition you need * 'AND'* or OR
I change decalration as below.
DATA:tabname    type TABNAME,
      table_disc type AS4TEXT.
SELECT dd02l~tabname
       dd02t~ddtext INTO (tabname, table_disc)
FROM dd02l INNER JOIN dd02t on dd02l~tabname = dd02t~tabname
WHERE dd02t~ddlanguage = 'E' AND
      dd02l~tabclass = 'TRANSP'AND
    dd02L~tabname = 'ZANKI*'.
endselect.
write : tabname.
Regards,
Pravin

Rollover links not working

i'm a newbie to DW3 (not 4) and I'm constructing my first site. I've used the insert rollover dialog box to place the initial link graphic and then the one to be seen in rollover state. I've chek'd "preload rollover image" and pointed the URL to the proper file inside my site folder. There are 7 of these rollover instances, 2 work and 5 don't yet they're all constructed the same way at the same time! When I don't use the rollover technique and just add one graphic as a link they all work fine!
I've deleted all the rollovers and completely reconstructed the page's rollovers and still the same result on the same rollovers.
Does anyone have any suggestions?
Thanks,
Tony

Hi Tony,
The answer, as always, is in your code. Can you upload your page and dependant files to remote server and post a URL here so we can see what have done so far?
My best guess without seeing your code is that you have applied the rollover states to something other than links???? Or you have some other mal-formed code somewhere in your page that is tripping you up.
Use the on-line validation tools below my sig to check your code and fix any reported errors.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
FREE HTML & CSS Tutorials - http://w3schools.com/

Active State not working in Horizontal Menu Bar

I have a Horizontal Menu Bar.
I've set the Top Level Item with Normal, Rollover, Mouse Down and Active States to be different.
All three work on the Top Level Item, EXCEPT for Active State. When the menu is Active, and I move the mouse down the items, the Top Level Item defualts to the Normal State, NOT the Active State.
I've tried trashing the Active State and rebuilding it. That did not work.
I can't figure out how to get the Top Level Item in the Menu Bar to display the Active State.
Hope someone has some suggestions, or knows if this is a bug.
Thanks.
Dave Coop.

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Case when statement not working

hi there, I am trying to work out how to get my case statement to work.
I have got the following code.
select pthproto.pthdbo.cnarole.tpkcnarole, pthproto.pthdbo.cnaidta.formataddr as formataddr, cnaidta.dateeffect as maxdate, isnull(cast (pthproto.pthdbo.cnaaddr.prefix1key as varchar (50)),'') + ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix2key
as varchar (50)),'')+ ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix3key as varchar (50)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.houseidkey as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component1
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component2 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component3 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component4
as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component5 as varchar (100)),'') as mailaddress, row_number() over(partition by pthproto.pthdbo.cnarole.tpkcnarole order by cnaidta.dateeffect desc) as rn into #address from pthproto.pthdbo.cnarole
inner join pthproto.pthdbo.cnaidty on cnarole.tfkcnaidty =cnaidty.tpkcnaidty inner join pthproto.pthdbo.cnaidta on cnaidty.tpkcnaidty = cnaidta.tfkcnaidty inner join pthproto.pthdbo.cnaaddr on cnaidta.tfkcnaaddr = cnaaddr.tpkcnaaddr order by cnaidta.dateeffect
select *, case when mailaddress is not null then mailaddress else formataddr end as test from #address where tpkcnarole = '18306695'
The case when statement is struggling with how i have created the column mailaddress. As it does seem to understand when it is null. In the example I have got there is no value in any of the columns to create
the mailaddress. Hence why I am referencing it from elsewhere. Due to having a way on the system where it picks up data from 2 different places. The mailaddress is always correct if there is one, hence why
trying to reference that one first. So how do i change this case when statement to work ?

It's ok I have fixed my own problem
when
(mailaddress
is
null
or mailaddress
=
then formataddr
else mailaddress
end
as test
case

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Import/Export statement not working..

Hi all,
   I want to export some data from BADI & Import it back in user exit.
I wrote following line of code in BADI
       export P1 FROM xstr to memory id 'ZABHI'.
& following line of code in User Exit
      import P1 to xstr FROM memory id 'ZABHI'.
After export sy-subrc becomes 0 hence export statement is working fine but when aftr import xstr remains blank.(sy-subrc = 4)
I tried to execute same code in single ztest abap program & it works fine there.
Thanks in advance.

hi abhijeet,
you are most welcome....
to delete, use
** deletes the data to save wastage of memory
delete from database indx(xy)
client sy-mandt
id 'ZABHI'.
you need to delete it coz, its available to all programs in the R/3
server via the ID and you don't want anybody to view the data u are
sending into memory.
the statement that u used earlier was program specific and hence
not accessible to the user exit.
Regards,
Samson Rodrigues.

Hide statement not working

Hi experts,
i am using hide statement but it is not working..The problem with it is that after line selection the variable on which i have used hide is carrying the last value of internal table always..<< Removed >>
Regards,
Raman
Edited by: Rob Burbank on Jun 30, 2009 10:41 AM

I am sending a test program with same problem...iin this after line selection the field variable emp-name is displayin only last entry of internal table...
*& Report ZBASICX12
REPORT ZBASICX12.
INITIALIZATION.
DATA: BEGIN OF ITAB OCCURS 0,
        EMPID TYPE ZTEMP-EMPID,
        EMPNAME TYPE ZTEMP-EMPNAME,
        END OF ITAB.
START-OF-SELECTION.
SELECT EMPID EMPNAME FROM ZTEMP INTO TABLE ITAB.
SORT ITAB BY EMPID.
LOOP AT ITAB.
    WRITE: / ITAB-EMPID HOTSPOT.
    HIDE ITAB-EMPID.
ENDLOOP.
END-OF-SELECTION.
AT LINE-SELECTION.
CASE SY-LSIND.
    WHEN 1.
      WRITE: ITAB-EMPNAME.
ENDCASE.

UPDATE statement not working

Hi,
I want to modify the record of PA0009 .I want to change the enddate of personnel No.
UPDATE PA0009 SET ENDDA = '30.10.2009'
WHERE PERNR = '1'
AND BEGDA = '01.09.2008'.
The above statement is not working. How to modify the enddate which is part of key table.
Please guide.
Thanks and Regards
K Srinivas

Hello,
Set the data format to the internal date format (YYYYMMDD), so in the set and the where clause pass '20091030' as ENDA which is to be changed and BEGDA in the where clause as 20080901. Also if the after the changes if the key combination results in dupicate records then the update will faiil. Just make sure that the combination of PERNR,SUBTY,OBJPS,SPRPS,ENDDA, BEGDA and SEQNR remains unique, if a record exists with this combination then sy-subrc will be 4 and the record will not be updated.
Regards,
Sachin

Collect statement not working

Hi,
My collect statement is not working. Kindly let me know what is the other way to add one filed in the loop.
thanks
Moderator message - Please ask a specific question - post locked
Edited by: Rob Burbank on Nov 19, 2009 9:24 AM

Same thing i faced few days ago --. i have resolved this using following logic ... try this it will workout
CLEAR: wa_mkpf_mseg, w_werks, w_matnr, w_lgort, w_bwart.
LOOP AT t_mkpf_mseg INTO wa_mkpf_mseg.
IF wa_mkpf_mseg-werks EQ w_werks AND wa_mkpf_mseg-matnr EQ w_matnr AND wa_mkpf_mseg-lgort EQ w_lgort AND wa_mkpf_mseg-bwart EQ w_bwart.
CLEAR: wa_p_coi.
READ TABLE t_p_coi INTO wa_p_coi WITH KEY werks = wa_mkpf_mseg-werks matnr = wa_mkpf_mseg-matnr lgort = wa_mkpf_mseg-lgort bwart = wa_mkpf_mseg-bwart.
IF sy-subrc = 0.
wa_p_coi-Avg Days = wa_p_coi-Avg Days + wa_mkpf_mseg-Avg Days.
MODIFY t_p_coi FROM wa_p_coi TRANSPORTING Avg Days .
CLEAR: wa_p_coi, wa_p_coi.
endif.
ELSE.
wa_p_coi-werks = wa_mkpf_mseg-werks.
wa_p_coi-matnr = wa_mkpf_mseg-matnr.
wa_p_coi-bwart = wa_mkpf_mseg-bwart.
wa_p_coi-lgort = wa_mkpf_mseg-lgort.
wa_p_coi-Avg Days = wa_mkpf_mseg-Avg Days .
APPEND wa_p_coi TO t_p_coi.
CLEAR: wa_p_coi.
ENDIF.
w_werks = wa_mkpf_mseg-werks.
w_matnr = wa_mkpf_mseg-matnr.
w_lgort = wa_mkpf_mseg-lgort.
w_bwart = wa_mkpf_mseg-bwart.
CLEAR: wa_mkpf_mseg.
ENDLOOP.

Rollover state not working in tooltip

Similar Messages

Maybe you are looking for