Link to frame in button rollover state not working..

Hi guys,
What I use: Flash CS5 & Actionscript 3
So I had my buttons working just fine and linking to a frame. But after adding a rollover state in which my button has grown in size it no longer links.
Does anyone know how to get my buttons linking in their rollover state?

var someObject:MovieClip; // this is declared - only
var someObjectMovieClip = new MovieClip(); // this is declared and instantiated
Make sure your code uses aghains and not instancename like your code shows.
I don't think you understand the third and fifth items I listed either. The third is saying that the code is not in the same frame as the item it is trying to target. The fifth has to do with objects in consecutive frames, not linking.
If you followed what I mentioned in the last sentence you should have a line number indicated in the error message that will tell you which line is causing the problem. Whatever line that is, the object doesn't exist as far as the code sees it. So if it was the line...
instancename.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_28);
I can guarantee you that there is no object named instancename in the frame where you have that code since it is the only object targeted in that line of code.

Similar Messages

Rollover state not working on active state

Hi, I have a problem with menu states. When a menu item is in its active state the rollover state isn't working. Is this supposed to happen or is there a solution to this?
Thanks.

Hello,
This is working as designed. Active state suppresses changing to any other state on mouse interaction and other states only work on links that are currently in Normal state.
Also refer: https://forums.adobe.com/thread/1136562
Cheers,
Vikas

Rollover state not working in tooltip

I am having an issue getting a rollover to work correctly in a tooltip. The action is fine but the rollover just doesn't work. You can see an example of it here: http://grosteffon.site90.com/index.html
The buttons in question are "Material Testing" and "Proficiency" Any help at all would be appreciated.

The rollover works in the fact that it triggers the submenu. Aish, do those two buttons change color (rollover state) like the other buttons? That is what I can't get to work.
Thanks!
Scott

Rollover states not working when published online. Suggestions?

I have created rollover states for image navigation. Works great in preview. Works great when published to desktop. I have uploaded to FTP site. Some of the rollovers work, others do not.? I have replaced and re-uploaded, still not working. The normal and active states all work, but the rollover state vanishes. The images are in the image folder. The css pages do have the code to swap the images. Same issue in Chrome, Safari, Firefox, and on ipad.
What am I missing? Thank you for your help!

What's the URL?

Button hit state not working

Hi, I made a few buttons for my .fla and all the states are working but the hit state.
So just to see what the problem was I made a new button, which is only text at each stage, so for up i wrote up, down down etc,
all the states work but hit, what gives???
hit is after someone clicks it it should be at the hit state correct?

Nope. Hit is the shape that will trigger a rollover/click area.
Normally the hit state is determined by the artwork in the up state and then the over state once you've rolled over, but sometimes you need to override that with an area different area. That is the hit state. But you don't need to put anything there.
Test it out. Make a circle on the other states and then put a larger square in the hit. Then check out how it works.

Rollover state not working on type

I have type that is supposed to act as a hyperlink. I've enabled it, and selected the color, etc. It looks fine in iweb, but when i publish it, there are no rollover states at all.
The only thing I can think of, is that i've put a drop shadow on the type, thus making it "art". Would that have anything to do with this issue?
Thanks

Yes. Adding a drop shadow to the text converts the text box to an image file. The rollover features don't work on an image used for a hyperlink.
OT

Button "Over" State Not Working Within Visible MovieClip

Hi Folks,
My button states aren't working right, and I'm pulling my hair out:
http://www.miklas.org/test/test.htm
The desired behavior is under the "Design..." button--notice how when you mouseover the "Our Philosophy" link it turns blue? Why isn't this happening for the "What We Can Do For You" and "Our Process" buttons in the other movieclips?
The document is structured as follows:
MovieClip 1: Design: Your Silent Salesperson
---Text
---Images
---Button: Our Philosophy
MovieClip 2: Who Owns Your Brand
---Text
---Images
---Button: What We Can Do For You
MovieClip 3: What's Your Brand's Persona
---Text
---Images:
---Button: Our Process
DETAILED EXPLANATION:
I have three separate movie clips with a bunch of objects. Using AS3, I tween their alpha value from 0 to 1 to make them visible depending on a user mouseover. As part of each movieclip I have a button. It is text with an underline; made to look like a hyperlink. When the user mouses over the text, I want it to change color from orange to blue. This works on the first movieclip, but doesn't on the second and third! What's weird is that if I cut-and-paste the button from the second or third movieclip to the first, the over state works fine. If I set Control -> Enable Simple Buttons, the over state works fine. But when I export it to .swf, it doesn't work!?
tyvm!

OK I finally got it! My layers were indeed out of whack--the entire problem was solved by the"setChildIndex" function.
Basically, when the user mouses over the buttons, I fade in the new clip, and set the depth above the other movie clips. Here's the code:
buttons_movieClip.whyDesign_button.addEventListener(
MouseEvent.MOUSE_OVER,
function(evt:MouseEvent):void
      if (active != whyDesign_movieClip)
        fade(whyDesign_movieClip);
        setChildIndex(whyDesign_movieClip,3);
        setChildIndex(whoOwns_movieClip,2);
        setChildIndex(persona_movieClip,1);
There is a black background at depth 0. The following forum post helped a lot:
http://www.smithmediafusion.com/blog/?p=435
tyvm!

Menu bar with rollover states not working properly

I have a menu bar that I want to have as a certain size. The
menu items that actually link somewhere are not showing up as the
designated size (150x50px) but the one link that is not linked to
somewhere else in the page looks fine (inventory).
Can someone look at the css and tell me if there is something
contradicting or if there is something I can do?
THank you
You can view the problem page at
http://thebradfordcreativegroup.com/abs/indexold.html

Sorry, I don't have the answers - but you need to see your
site in IE6. It
looks quite different - kind of bloated. Also, the "Quality"
link doesn't
have an arrow.
"Inventory" as you say sits up at the top. FF is fine. Sorry
I can't help
though.
Jo
"joshuataylordesign" <[email protected]>
wrote in message
news:fqia5f$anb$[email protected]..
>I have a menu bar that I want to have as a certain size.
The menu items
>that
> actually link somewhere are not showing up as the
designated size
> (150x50px)
> but the one link that is not linked to somewhere else in
the page looks
> fine
> (inventory).
> Can someone look at the css and tell me if there is
something
> contradicting or
> if there is something I can do?
> THank you
> You can view the problem page at
>
http://thebradfordcreativegroup.com/abs/indexold.html
>

Syncing Button Rollover States

I'm building a website for myself (currently with the Muse trial, but I am planning to buy), and I have a question regarding button rollover states. The site I'm building is an architectural photography website, and the general portfolio page has a list of subcategories in the left-side menu bar. However, I also want to have thumbnail links to each of the subcategories in the main body of the website (see image provided). The thumbnails are for the Educational and Municipal subcategories. I have currently set up the rollover states for all the links in the left-side menu (to turn to the light blue that is seen on the active state of the Portfolio button), and I've set the rollover states for the thumbnails (to go to 50% opacity). Is there a way for me to synchronize these rollover states? I would like to see a thumbnail respond in its rollover state if I roll over its corresponding button in the left-side menu, and vice versa.
Thanks!
Rob

Hi,
To accomplish that you can use the composition tool tip. A transparent triger can be placed where your menu item is and the target will be on the image with an opacity of the 50%.
However, this will only work in one direction and will not change the menu item when you roll over to the image.
Regards,

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Why isn't my back button in Safari not working? I am constantly resetting Safari.

Cheryl...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
Restart your Mac. Launch Safari. Try the back button.
~ (Tilde) character represents the Home folder.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Disabling Radio Button Conditionally is not working Well

Hi friends,
I have three radio buttons
<li>self
<li>New Hire
<li>On Behalf of
I will be showing this radio button conditionally according to the user who logs into the application.
Assume, suppose if a person 'A' enters into the application means he will be shown only these radio button options ---NH---,----OB----,----Self-----
Suppose, if a person 'B' enters into the application means he will be shown only these radio button options ----NH----,----Self---
If a person 'C' enters into the application means he will be shown only these radio button options ---Self---
I have restricted those radio buttons according to the users who enter into the application using their roles.
But my challenge here is once the user logged in and if he select anyone of the radio button means,
Example if he selects----NH---means, then ---OB----and -----Self---radio button has to disable and if he selects ---OB----means then ----NH-----and ---Self---has to
disable(vice versa).
I have also achieved the same using the DA.
With true action as: javascript Expression i have given the following codings( i have written the below DA for three cases, if the request_class_code is equal to
(NH,OB,S)
var enabled=$v('P22_REQUEST_CLASS_CODE');
if (!$u_SubString(enabled,'S')) $('#P22_REQUEST_CLASS_CODE_2').attr("disabled","disabled");
if (!$u_SubString(enabled,'NH')) $('#P22_REQUEST_CLASS_CODE_0').attr("disabled","disabled");
if (!$u_SubString(enabled,'OB')) $('#P22_REQUEST_CLASS_CODE_1').attr("disabled","disabled"); The above DA is working great only for the user who has the option of viewing three radio buttons in my form(i.e)(NH,OB,S).
For the user who has the option of viewing two or one radio button, it is not working properly(i.e)(NH,S) or(OB,S) or(S).
Why it is not working for the user with two options or with one option radio button means, the source of that radio button property is changing. Since i have taken
the source of my radio button in my DA only when the three options are present.
How i can solve this issue for the user who is having this two radio option or one radio option.
Hope you understood clearly about the problem.
Brgds,
Mini

Hi,
If I did understand what you like have this might work
var lVal = $v('P22_REQUEST_CLASS_CODE');
$('#P22_REQUEST_CLASS_CODE input:not([value="' + lVal + '"])').attr("disabled","disabled");Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME

Link to frame in button rollover state not working..

Similar Messages

Maybe you are looking for