Room Mailbox - When creating a meeting request, the Room Mail Box Alias message returns with Delivery Failure

Good Day,
Hopefully someone here has the know why on this one.
I have setup the Room Mailbox as per several online tutorials. From my Outlook 2013 I can access the room and its calendar.
But when I create a new meeting request, I add myself as an Attendee for testing purposes. When I select the room from the rooms button. It adds the room mailbox [email protected] to the attendee list.
When I click send, the alias address returns as below:
Delivery has failed to these recipients or groups:
 Principals Office ([email protected]) There's a problem with the recipient's mailbox. Please try
resending the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
 Generating server: EXCHANGE.ourdomain.LOCAL
 [email protected] #550 5.2.0 RESOLVER.FWD.NotFound; misconfigured forwarding address ##
 Original message headers:
 Received: from EXCHANGE.ourdomain
.LOCAL ([10.10.1.3]) by exchange  ([10.10.1.3]) with mapi id 14.01.0438.000; Fri, 31 Jan 2014 14:15:26 +0200 Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary From: "Chadley L. Wilson" <[email protected]>
Subject: Canceled: test 43 Thread-Topic: test 43 Thread-Index: Ac8eeG1lL8A9HdusTwmNIg6lVDeCaQABbBnA Importance: high X-Priority: 1 Date: Fri, 31 Jan 2014 14:15:25 +0200 Message-ID: <E7EC80BFFFA86E4086FDCE3C18EFBDD79ACCDF1C@exchange> Accept-Language:
en-GB, en-ZA, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: <E7EC80BFFFA86E4086FDCE3C18EFBDD79ACCDF1C@exchange> MIME-Version: 1.0 X-Originating-IP: [10.10.1.33]
In the Exchange EMC I have setup the everything as per the following link:
http://exchangeserverpro.com/exchange-server-2010-room-mailboxes-step-by-step-guide/
I have also use created a room list and added the rooms to it. They show upo in my outlook.
I have rebooted the server and tried various permissions and option settings in Outlook with no luck. I even tried enabling the user account in AD. Nothing works and the email always comes back undeliverable.
One post I read suggested that In the Resource General tab that Enable the Resource booking attendant be ticked. Either way it doesn't get right of the problem.
Chad the Dad

Ok I see from the output below there were two problems fixed the first one, but I can't figure out how to correct this one:
The forwardingAddress is wrong. But I also do not know what it should be
Name                          : Principals Office
Alias                         : principalsoffice
ForwardingAddress             : ourdomain.LOCAL/Admins/John H. Robertson
ForwardingSmtpAddress         :
OfflineAddressBook            :
AddressListMembership         : {\All Mailboxes(VLV), \All Recipients(VLV)}
EmailAddresses                : {SMTP:[email protected]}
HiddenFromAddressListsEnabled : True
EmailAddressPolicyEnabled     : True
PrimarySmtpAddress            : [email protected]
WindowsEmailAddress           : [email protected]
DeliverToMailboxAndForward    : False
ForwardingAddress             : ourdomain.LOCAL/Admins/John H. Robertson
ForwardingSmtpAddress         :
Chad the Dad

Similar Messages

  • Pick from multiple rooms, when creating recurring meeting

    Say I have a recurring Tuesday 10-11AM meeting I want to book in Outlook for the next year.  I would like to book it in the room "Shasta", because it has the best teleconference equipment, but it's not a deal-breaker if I have to
    be in anther conference room..
    But it turns out that next month on August 18th, Susan has already booked Shasta in the same timeslot, causing a resource conflict with "Shasta.  Even if this is the only conflict, my entire meeting series gets declined.
    My options at this point are grim.  I can partition my recurring meeting into a pre-August 18th partition, and a post-August 18th partition, with a third single instance on August 18th in some room other than Shasta.  My attendees have
    to suffer 3 invites.  There are also some other really painful things i can do to book the meeting, such as manually booking each of the 52 instances etc.
    Bottom line is, I shouldn't have to spend 1-2 hours booking a meeting, and confusing my attendees with a half-dozen Meeting Update notifications due to room changes.
    Is there an after-market utility or some trick I can use to say:
    "Book a recurring weekly Tuesday meeting from 10-11AM, 52 instances. My first room choice is Shasta, my second room choice is Alps, third room choice is Morgue, fourth room choice is Eiger."
    And it will figure out the rooms for me?
    Thanks very much for your time.
    -Jeff
    ps: For now, don't worry about platform or version of Outlook.  I'm open to all ppossibilities  I use Outlook for Mac.  It's lacking in feature parity,
    much like Office for Mac, so I book my meetings and organize distro lists through Outlook Web Access, and I also have a VMWare instance of Windows running for when I need some functionality that is only available in the Windows version of Outlook.

    Hi Jeff,
    In Outlook side, if there are any conflicts in your recurring meeting, we can pick out the conflicts then open just this one instance of recurring meeting, change the location to another room, and send updates to all attendees.
    After changing locations for all conflicts meeting one by one and the changed rooms also have accepted all updates, the organizer can open the entire series of recurring meeting in Calendar and send updates to all attendees without change anything. Now,
    there should be no conflicts and the recurring meeting should be accepted by the room mailbox.
    Additionally, this scenario which the behavior of the
    Resource Booking Attendant may seem confusing when it comes to processing a recurring meeting request where individual recurrences conflict with existing calendar items can be managed by calendar processing settings in Exchange server side. The Exchange
    administrator can use
    Set-CalendarProcessing in Exchange 2010 to allow recurring meeting conflicts and set Max conflict instances. For more information about it, please refer to:
    http://blogs.technet.com/b/exchange/archive/2011/02/07/3411956.aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • When creating self service request contains attachments and it's approved

    when creating self service request contains attachments and it's approved  is the attachments automatic transfer to the applet form or not?

    resolved

  • I am able to 'create a new version from original' but when I try to export the original, I only get a .jpg with the XMP file. The original is obviously there but why can't I access it please?

    In Aperture 3 when I right click on an image I am able to 'create new version from original' which suggests that the original is there. When I try to export the original I only get a .jpg with the XMP file. These particular images are from 2010, has the RAW file become disconnected somehow? Please, how do I get access to the RAW file for editing in Ps? Thank you. Thomasrevil.

    Sorry leonie, 'Use RAW as Original' is not an option for the image shot with the Canon.
    Then your Import settings must have been different, when you imported the Canon photos.
    You can check, if there is still a hidden raw file somewhere. If the image has been imported as a pair, you should see the "J" badge in Browser and Viewer, if you enable badge overlays. This indicates a pair, with the jpeg as original.
    Select one of those images, and then relocate the original files "File > Relocate original" to a folder, where you can inspect it. Use "File > Show in Finder" after ward. Look, don't touch .
    Then put it back, using "File > Consolidate".
    Do you see your raw files in the folder, or is only a jpeg there?

  • When creating a PDF from the scanner, it only scans one side despite the settings.

    When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
    Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

    Hi anne,
    Could you please let me know what Acrobat and OS version are you using.
    Does this happen in case of any particular PDF or all PDF files?
    Try repairing Acrobat and then again check.
    Hope to get your response.
    Regards,
    Anubha

  • How do i create multiple databases on the same unix box?

    Hello experts.
    Please send me some guidelines on how to create multiple databases on the same unix box and how to configure their startups including listeners.
    Please also, list me the possible precautions to takes especially if the existing database is a production one!
    thanks very much for you reply
    Best Regards
    Yogeeraj

    Hello,
    I tried the following:
    svrmgrl> startup nomount pfile=I:\d01\oracle\admin\cmttest\pfile\init.ora
    then
    svrmgrl> CREATE DATABASE cmttest
    LOGFILE 'i:\d01\oracle\oradata\cmttest\redo01.log' SIZE
    1024K,'i:\d01\oracle\oradata\cmttest\redo02.log' SIZE 1024K
    MAXLOGFILES 32
    MAXLOGMEMBERS 3
    MAXLOGHISTORY 1
    DATAFILE 'i:\d01\oracle\oradata\cmttest\system01.dbf' SIZE 50M REUSE
    MAXDATAFILES 254
    MAXINSTANCES 1
    CHARACTER SET WE8ISO8859P1
    NATIONAL CHARACTER SET WE8ISO8859P1;
    Then when i try to run both databases:
    svrmgrl> set instance cmttest
    ORA-12500: TNS: Listener failed to start a dedicated process
    ===================
    I am doing something wrong.
    please help
    Regards
    Yogeeraj

  • Contacts can't be viewed or add/created yet I see the in Mail app. Fix???

    I just performed an upgrade to snow leopard. Now all contacts within address book have disappeared. Also, I don't have the ability to create a new contact within address book. Yet, I have the ability to view the address book when creating a new email w/in Mail app. I mention this b/c it seems that I wouldn't be able to see them while I'm having issues w/ Address Book. My primary issue is to fix address book. Here is what I have done so far to try and fix the problem with no success:
    1) Disk Utility Repair permissions
    2) Custom install of Address book from the Snow Leopard dvd
    3) Pulled out the p-lists from the library and restarted the address book/computer in hopes it would recognize them on the desktop. After that did not work I put them back into the library.
    4) ReInstall of 10.6
    Thoughts???

    Greetings,
    Am I right? Is there any way to see what messages are waiting to go out?
    No, there isn't an way to view messages in queue, and if you do anything to stop them, they'll disappear forever. If a server is having a problem, wait for it to timeout and give you an error message; then choose to try later and quit Mail. Then restart Mail and it will try to send it again.

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the

    How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the e-mail.  What have I done differently?

    Thanks again for the detailed instructions Srini!
    And I really hate to be a pest . . . but . . .
    Using your example and not modifying it, I get the e-mail form filled out correctly and the pdf attached, however, I'm not prompted to sign it.
    Any more clues?

  • I have PSE13 on my system.  It was functioning properly and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to c

    I have PSE13 on my system, Windows 8.1, 64-bit.  It was functioning properly after installation and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to check your printer settings before printing."  and then this statement:  "Default printer could not be opened."  I have reloaded drivers for both printers and made any upgrades possible.  It was working fine before and now all of a sudden, nothing.  Would prefer to have old PSE v.12 back, it worked with no problems.

    See this thread
    My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

  • Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

    I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

    when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
    anyway, here is the code.
    <object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

  • I have a Macbook with 10.6.8 and want to upgrade to Mountain Lion, but when I try to download the program, I get a message that it is not compatible with my computer.

    I have a Macbook with 10.6.8 (Snow Leopard) and want to upgrade to Mountain Lion.  When I try to download the program I get a message that says Mountain Lion is not compatible with my computer.  Please help.

    ML requires one of these:
    You should verify if you qualify.

  • HT4759 When I sign in to the cloud I get a message saying "server error

    When I attempt to sign the cloud, I get a message that states I cannot sign in because of a server error. What to do?

    Found this solution for Windows 7 and it works for me.
    1) Click on Start
    2) Type cmd and press enter you will see a new window
    3) type "netsh winsock reset"
    4) restart the machine

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

Maybe you are looking for

  • HT204506 Apple Pay - Watch - Adding a passcode on the watch is not working

    Hi, I want to use Apple Pay and it asks me to add a passcode on the watch. The system is asking for a 6 number passcode but I keep taping on OK and nothing happens. Anyone else in the same situation?

  • Oracle name server error

    C:\>sqlplus scott/tiger@namestest SQL*Plus: Release 8.1.7.0.0 - Production on Fri Jun 14 14:16:13 2002 (c) Copyright 2000 Oracle Corporation. All rights reserved. ERROR: ORA-12637: Packet receive failed what can I do for this error.

  • Individual payement in F110

    Hi, i am trying individual payement in F110.it means i want payment transaction by each open AP item instead total AP,everything is working fine execpt payment medium file,i download payment medium as txt file,but only one payment in txt file,but my

  • 'Merge' function in Power Query

    A bit of background- I have 3 .txt files that I would like to combine into one table in Excel using Power Query. Two of the files contain the same kind of data, and the third contains geographic data I'd like to add on. The first two files I mentione

  • Flash 8 AS2 coding not working

    We have an application that creates a page turner type of documents. We have a player to put it all together but one of our client wants to import this in Presenter. We created a "loader" type of swf to load the application and kept the rest of the p