Rotate didn't stay rotated once loaded to Youtube. Please help!

I'm so frustrated, I can't believe it. I took a video of my grandbaby trying to line dance and I turned my camera so it was taking a portrait clip. When I realized I couldn't rotate it with quicktime, I paid for the $30 upgrade to pro because it said that would do it. It did - on my machine. I saved it and loaded to Youtube so family could watch it without a problem and lo and behold, it reverted to being sideways. I keep looking for answers on the internet, but any that look even remotely like a solution are geared for Windows - aaargh - never could get why people liked that - but that's another issue. Anyway, I'm hoping some saavy mac/quicktime users on this board will have already been there and done that and can help me. Really appreciate it. I'm desperate. Thanks so much in advance for any and all help.
Catherine

After you asked, I went back and did it from scratch and "saved as". I uploaded it, but it's on it's side again. You'd think it would be so simple, but it sure seems to be a problem. I'll never turn the camera sideways to take a video again. Unfortunately, this event won't happen again, so I would like to get it rightside up so family members can look at it.

Similar Messages

WHEN I TURN MY MACBOOK ON, IT STAYS ON THE GREY SCREEN. PLEASE HELP~

it just stays on the grey screen forever and it wont actually turn on or load anything. PLEASE HELP.
Message was edited by: Mcnugget9949

Try this on your internal drive. Using Disk Utility to verify or repair disks.
You also might try to reset the SMC and/or PRAM.

HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy

I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

I can't get Firefox 10.0 to recognize 1password 3.8.15. The extension doesn't stay as an add-on. Please help!

1passowrd team released support for Firefox 10 already. Do an autometic update and check.See:
* http://support.agilebits.com/discussions/1password-for-windows/487-firefox-100-doesnt-support-1password

HT1386 Trying to Sync - Unable to load data class - please help

I just cleared my I-Pod Touch to put new music on it and my computer is prompting the following. "I-Tunes was unable to load data class information from sync sevices." Reconnect of try again later. Another prompt that keeps appearing is "the application apple mobile device help quit unexpectedly." Please help me...

Apple Mobile Device Restart. Disable all security software ex. Firewalls and Antivirus. Follow article http://support.apple.com/kb/TS1567 . The above listed article is correct by lllaass. I resolve it by unchecking the different categories in itunes sync pages... Plug in device, click on name on left side of itunes, Click on different sync pages like summary, info, music, movies, etc. You need to uncheck the main check box to sync content. An example would be unchecking "Sync Music" . You will then need to sync once for each category until you locate the source of your corrupt files or folders. Syncing without it checked removes content from device. Follow this step even if there is nothing on the device. Once you identify if it is picture or music etc. you will need to delete corrupt files or move them somewhere else on the computer so itunes can't find it anymore.

HT201364 has any one had a problem downloading maverick on your system.ports 1 2 3 has been split by the person i brought the mac from and i'm having a hard time loading maverick.. please help..lol

Good day i am having a problem with loading maverick on my mac tower 10.6.8..my computer guy set the hard drives up in different ports, so i put my operating system 10.6.8 on another hard drive to see if that would work,but i notice the main hard drive and the one i choose changed places on my desk top ,but i still cant download Maverick.. probably something small but i don't no that much about this problem...please help..lol

What kind of Mac do you have. A PowerMac cannot run Mavericks, nor Snow Leopard (10.6.8) for that matter.

The App Store is not loading.. Please Help

Since I bought my mac pro back in 2011, I have never used the app store because it never loads.
Now I really need it because I trying to download the Yosemite. Below is what I get every time I open the app store on my macbook pro.
Please help fix this.

Hi ..
Several things to try.
Apps such as Little Snitch, Growl, MacKeeper, and anti virus software, can prevent the App Store from loading
Disable anti virus software if installed
Check the firewall in System Preferences > Security & Privacy > Firewall > Firewall Options
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

How to Load External Images - Please Help!

I have created a simple portfolio site. The buttons I created
trigger separate frames. Could I not create a MC (Movie Clip) on
each frame where the images now reside and then when the button is
clicked (On "Click' Goto frame 1) for e.g. then the image would be
loaded from an external folder named "Images" in my website?
I am stumped as to how to set this up. Could someone please
help me?
Thanks

Yes, you can do that. Which version of Flash and which
version of Actionscript are you using?

My MacBook is stuck on the loading screen. Please help! Not sure what to do

Hi, so my MacBook has stopped working for some reason
I've just tried switching it on but it has stopped on the loading screen.
I am scared and not sure what to do.
Please help!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Videos NOR Music will load after SYNC, Please HELP

Hello everyone,
I have an iPad and Recently bought RIO to watch on the iPad.
After it downloaded I could not find it anywhere! So I synced to my iTunes and there it was....after the iPad was done syncing I ejected it....
And NOW the Music folder NOR the iPod apps will open.
In my setting my iPad shows that there is 0 movies and 0 songe.....but when I connect it to my iTunes....it shows all the music and videos are on my iPad!
Someone PLEASE HELP!!!!!!

I just wanted to get the question out ASAP....
So here is the breakdown
My 2 year old wanted to watch something new. So i decided to use my iPad and look for a new movie. He saw the preview of RIO and wanted to watch it.
So i downloaded it and once it was finished I went to my main page and opened the videos icon. All my videos were there, but when I looked for RIO it was not there. I even went to the search page and only angrey birds same up (RIO EDITION).
So i was like DANG....walked downstairs and plugged my iPad inot my computer. I opened iTunes and proceeded to transfer purchases. So RIO transfered over to my iTunes on my PC.
Once it was complete, I clicked the eject button and "tried" to open the videos app.....Nothing happened. It went the videos black background screen for like 7 seconds then it automatically exits and returns to the home screen. I was like...WHAT??
I tried and tried again with no luck.
I walked back to my computer and tried to resync and remove all videos and music over and over and over with no luck!
So at the moment, when i try to open either the video or the ipod apps...they just sit at the background screen for about 7 seconds then shuts down and returns to the home screen.
When i go to my settings in my iPad it says there are NO songs and NO videos on my iPad.
When I plug it into my iTunes, it shows that I have 9gb of free space on my 64gb iPad....1180 songs and like 8 movies and 22 tv shows...mostly kids stuff...
So I hope that helps clarify my problem.
I have had this once before, but it fixed itself, I was at work and a few hours later everything was working!
But NOT this time, its just not wanting to play at all
Thanks again for your HELP!

SQL Loader error: SQL*Loader-926. Please help

Hi,
While loading some files to my database table, I am getting the following error. I am using 'Truncate' option while loading the file:
Error:
====
SQL*Loader-926: OCI error while executing delete/truncate (due to REPLACE/TRUNCATE keyword) for table LOS_STAGE_DS4
ORA-01426: numeric overflow
Here's the loader properties(excerpts from load log)
================================
SQL*Loader: Release 11.1.0.6.0 - Production on Fri Nov 26 04:54:18 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: d:\Prod\rent_Load\Bin\rent_Load.ctl
Data File: d:\Prod\rent_Load\Data\rent.704
Bad File: d:\Prod\rent_Load\Bad\rent.704
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 1000000000
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table LS_STAGE, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
Column Name Position Len Term Encl Datatype
Could someone please help and advise what is the root cause of this error?
Thanks,

The root cause is in the error ora-1426, which you can look up in the online error documentation at http://tahiti.oracle.com . No one knows every error message by heart. This means it is expected you look up the error prior to posting, and you don't expect any volunteer in this forum to look up the error on your behalf.
Also this is a typical candidate for being a known problem, and known problems can be found on My Oracle Support.
Sybrand Bakker
Senior Oracle DBA

Steps for improvement once after GO LIVE - please help

Hi,
Please advise me about the general steps normally followed once after GO LIVE...that is once after BW system stabilization...any general improvement ideas....Please help.
[email protected]
Advance Thanks
David

Hi David,
Configuration I mean here is nothing but settings which we have done to each data target. Ex. Lets say we have craeted a custom cube, they will check all the dimensions and fact table and see whether they are perfect. They will check whether there is more number of line item dimension which is also not useful. So all these test will be done by SAP and they will suggest if anything need to be chnaged.
Aggreagtes they will check based on the query usage by users and by which field they filter often. So based on that check aggreagtes will be done after go-live its better to build aggregates.
Hope this helps.
Regards,
Bhuvana.

Mappping to load a flatfile -- Please Help!!!!

Hi,
I am new to OWB and trying to create a simple mapping to load a flat file into a table. My Version of OWB is 9.2.0.2.8 on an Oracle 9i DB. Below is the warning I get when I validate my mapping. When I proceed to generate I get the same warning and when I proceed to deploy it fails with the same error.
VLD-2398: No data file specified. Generated code will use the sampled file name and the file location 'SOURCE_FILES_MANUAL'.","To specify a data file configure the mapping, add a node under 'Source Data File', type in the file name and select the file location."
In the above warning,'SOURCE_FILES_MANUAL' is the location I created which corresponds to a physical location on my Hard disk.
What am I doing different!! Please help.
Thanks,
Srinivas.

hi guys,
i have the same problem (VLD-2398). this warning doesnt effect the successful deployment of my design - so i can ignore it at first - , but it leads to problems later on, because i think there isn t the valid pointer to the flatfile.
in the AWM (analytic workspace manager) viewing the data of a dimension, which is filled with data from the flatfile, it gives the error:
"BIB-9509 The Olap Service did not create cursor.
oracle.express.ExpressServerExceptionError class: OLAPI
Server error descriptions:
DPR: Unable to create server cursor, Generic at
TxsOqDefinitionManager:... and so on"
so can anybody please help me.
i did try to use a external table instead of the flatfile->table mapping, but although the validation is successful, doesnt work. in the external table properties in tab "file" i only see the file name, but couldnt choose the record. maybe this is the prob?
grateful for any hint.
greetings
s8472

ORDDoc - Loading Word Document - Please Help

Hi
I am trying to upload the word document (doc format) to the table i have in oracle database. The table has the column of type OrdDoc.
I am using Intermedia Java API to load the word file from my local system to the database. The upload is happening successfully but when i try to retreive the document i see that its empty and even the properties (mimetype, format) of the document are null.
I would appreciate if anyone of you could please tell me what am i doing wrong and how can i upload the file correctly.
Below is more information about table structure and also the java code.
Table Structure
TableName: DocTable
ColumnName Type
DocId NUMBER
DocName VarChar2(40)
DOCUMENT ORDSYS.ORDDoc
Below are some lines from my code
String insertDocRecord_Qry = "Insert into DocTable (docId,docName,document) values (1,"FirstDoc ",ORDSYS.ORDDoc.init())";
PreparedStatement insertStmt = conn.prepareStatement(insertDocRecord_Qry);
insertStmt.execute();
String selectDocForUpdate_Qry = "select document from DocTable where docId = 1 for update";
OracleResultSet rset = (OracleResultSet)stmt.executeQuery(selectDocForUpdate_Qry);
rset.next();
OrdDoc docProxy = (OrdDoc)rset.getORAData("document", OrdDoc.getORADataFactory());
rset.close();
docProxy.loadDataFromFile("C:/Files/MyFirstDoc.doc");
String updateDoc_Qry = "update DocTable set document=? where docId=1";
opstmt = (OraclePreparedStatement)conn.prepareStatement(updateDoc_Qry);
opstmt.setORAData(1, docProxy);
opstmt.execute();
opstmt.close();
PLEASE HELP ME FIGURE OUT WHAT AM I DOING WRONG IN ABOVE CODE.
ABOVE Code doesnt throw an error when executed but when i try to retireve the properties of the document that gets loaded in to the DocTable all i see is null values and 0 content length.
Thanks for your help in advance
-L

Hi Mavris
Thanks for the reply.
In my example the reason i did not invoke setProperties() method is because the setProperties method exposed in OrdDoc class is not same as the setProperties method in OrdAudio or OrdImage.
In OrdDoc class setProperties(byte[][] ctx,boolean setComments) takes two arguments where as setProperties() in OrdAudio and OrdImage does not take any arguments.
byte[ ] ctx[ ] = new byte [4000][1];
When i tried to use setProperties(ctx,true) in OrdDoc i was getting an error.
Can you please tell if this is the correct way to invoke setProperties on OrdDoc in Java Program?
Regarding the list of format that Intermedia Understands, the Appendices A, B and C in Intermedia Refererence talks only about Audio, Image and Video. It doesnt have any details about Document (pdf, txt, doc) files. Can you please tell where can i look for the list of formats that intermedia understands for OrdDoc?
Since the dataType is OrdDoc in my table. How do i check the LOB length?
I tried it using Intermedia Java API by calling getContentLength method after retreiving the OrdDoc column from resultset but it has a value of '0'. So am not sure why the document is not getting loaded.
Please help me resolve this issue.
Thanks

Resource Conflict – Serial Bus Controller & PCI Bus Issues - Cannot Load Windows 7 - PLEASE HELP!

Anyone have any ideas about a remedy? I am ready to toss it and purchase another. THANKS! HP Pavilion Notebook, dv9827clAMD Turion 64 x 2, Bios F.34Windows 7, SP 1 (Upgraded from OEM Vista SP2) PROBLEM: This morning my system has a blank illuminated screen. Upon power-on, the system eventually goes to the blank screen. Can get to BIOS functions, but beyond that it will not load Windows 7. System was working with Windows 7 prior to this issue. No recent changes or updates made to this system. Stationary - No physical abuse. Five (5) years old. Upon power-on, the screen gives PF keys, which enable me to enter the BIOS: F1 – System Information > Clock still has correct date and time. F2 – Startup Check -> Both HD and RAM OK F9 – Change Boot Device Order -> Can change device order, but it still won’t boot or respond to a System Recovery DVD in a USB DVD. ( Notebook DVD stopped working before this problem happened.) F10 - Enter Setup F11 – System Recovery – Two choices, but <enter> and arrow keys do not work. (They DO work with other F-selections, but not with F-11 menu) (1) Continue with System Resume (2) Delete Restoration Data and Proceed to System Boot OTHER OBSERVATION: When access PF1, I get the BIOS. If I exit and save with PF10, I get a brief flash of error messages, then it goes back to the PF-selections and eventually to the blank screen. Here are the error messages:Bios Version F.34ERRORResource Conflict – Serial Bus Controller on MotherboardBus 02 Device 05 Function 00ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 01ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 02ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 03ERRORResource Conflict – PCI on MotherboardBus 02 Device 05 Function 04 OTHER ACTION: Tried a hard reset = Removed battery, held down power key about a minute, but no effect. The data part of the HD is ok. I can remove the hard drive and put it in an enclosure, then access the data with another computer.

Hi!
I have exactly the same problem on my HP dv6750, but I can't find an answer that really help me to solve it.
Well, this post shows the description of my problem, so, I don't want this question dies.
If somebody have the solution, please, help me to bring my laptop back to life again.
Thanks

Rotate didn't stay rotated once loaded to Youtube. Please help!

Similar Messages

Maybe you are looking for