Rounding Price in Business Partner

Hi Guys,
How can i configure the price list properly
Say i'm buying that item - 1 Roll = 6$ = 55 Meter
But SAP B1 is calculating the price with UOM that is meter.
so the end result will be 6$/55 = 0.1090909090909091 /meter
How can i round it properly so everytime PO request for 1 roll, it will be 6$ and 55meter?
i have an error. kindly refer to the attachment.
Thank you in advance.

Hi Nagarajan,
Can you show me a guide on how to create a rounding for this item?
1 ROLL = 55meter
1 ROLL = USD 6.00
When creating PO, once part number is entered.
It should show = Quantity 1 ROLL = Unit UOM = Price 6$
Thank you.

Similar Messages

Multiply price list per Business partner

Hi
does any one come accross information on how i assign Business partner 2 or more price list
basicly what i want to do is to give diffrent factors (price list) for diffrent Group of items , so each BP will have diffrent disscount for each group of items in the same time .
Example :
2 items from group A will have Price List 50% disscount
3 items from group B will have Price List 45% disscount
i want to assign both Price List for the same bussnies partner.
Thanks
yanivh

Hi Zohar,
I did something a while ago for a customer, the basics of it were as follows:
Create a UDT to store the discount matrix
Add a UDF to the UDT so that you can store the Customer Group
Add a UDF to the UDT so that you can store the Item Group
Add a UDF to the UDT so that you can store the Discount % for the combination of Customer & Item
Add a formatted search to the Customer Group column in the UDT so you can lookup the OCRG table
Add a formatted search to the Item Group column in the UDT so you can lookup the OITB table
Then add a formatted search to the Discount % field so that it goes and gets the Discount % from the UDT where the Item Group is the Item group from the row item $\[$38.1.0\] and get the customer group from the BP on the form $\[$4.CardCode\]
Hopefully that should give you a starting point for this and allow you to work out the rest yourself.
Regards,
Adrian
Sorry, a couple of extra points, you can simplify this is you don't need to know the Customer Groups (e.g. all customers get the same discount %'s for the item groups) or you can make this as complicated as you need it to be.
Edited by: Adrian Johnson on Oct 20, 2009 1:45 PM

Business Partner Special Price Import - DTW

Forum,
We have a number of special prices for Business Partners which we'd like to update. In some cases, we would like to remove the current special price and have the system pick up the unit price against an item within Item Master Data.
When importing through DTW using the OSPP template, we have entered '0' as the price. This correctly imports in through DTW and removes the special price however, when we then raise a sales order for that item. The unit price is zero and it hasn't picked up the unit price against the item within item master data.
Is this how it works or is there a setting we're perhaps missing? I have test this in the demo and it does pick up the unit price from item master. In our set of data, it does not.
Regards,
Juan

Hi Juan,
You may check:
Re: Price List table not updated
Prices auto adjusted when setting up BP Special Prices
Thanks,
Gordon

Using Business Partner versus Customer/Vendor master

What could be the business scenarios in ERP2005, when Business Partner (BP) functionality should be used rather (or addition) than older Customer/Vendor master?
I know that in CRM the BP is mandatory, but still CRM can interact with ERP's customer master using middleware replication. I also know that some ERP industry solutions like IS-U uses BP instead of customer master.
I know that when maintaining a partner with tcode BP, also the customer master tables (KNA*) gets updated if partner has a Sales role. Thus system automatically updates both BP and customer master data. But does it work other way round?
But if no CRM nor ERP industry solutions are within current solution landscape are there any other business scenarios why BP should be chosen instead of customer/vendor master?
In a virgin ERP2005 project, is it a good practise to start with BP already from the beginning even if benefits of it are not yet recognized?
I know that many ERP2005 projects are live without BP, so a it cannot be a "must" at least.
best regards,
Kim

Hi,
Just to check, try running from the synchronization cockpit for your scenario from the master data reconcillation. Give your BP number and try running BP -- Customer sync. In this you can check the PPO logs and check where the error is. It will show the exact error you are getting.
For BP, you can also try creating it in FI customer role, which will have all the customer master data.
Regards,
Ravi

[Special Prices for Business Partners] and [Hierarchies and Expansions]

Dear Sirs,
I am running into three problems.
1.) I loaded 313 items Special Prices by DTW however I can not locate where it went?
I searched via the path [Inventory>Price Lists>Special Prices>Special Prices for Business Partners]but find nothing in there.
2.) I can not find DTW templates for Hierarchies and Expansions data load.
Also I searched via the path [Inventory>Price Lists>Special Prices>Hierarchies and Expansions] to see if the Special Prices I loaded with DTW maybe there but find nothing there.
3.) I can not find any information related to Hierarchies and Expansions in the [diapi] help file.
Could it be these two functionalities require "manual" input?
If so, how on earth the 313 Special Prices DTW data load went through "successfully" and find no trace of it?
I am pulling my hair off to find some advice.
Would appreciate it greatly if someone could enlighten me on these two functionalities.
Kuni - Tokyo
Edited by: furuya kunitomo on May 15, 2009 2:28 PM

Hi Kuni,
To quickly answer your questions:
1.) I loaded 313 items Special Prices by DTW however I can not locate where it went?
The path is correct. If you can't find anything probably something went wrong in the DTW import.
Check that the "Test Run" checkbox was not checked and all required keys are entered in the templates.
2.) I can not find DTW templates for Hierarchies and Expansions data load.
The relevant templates are:
SpecialPrices.xlt
SpecialPricesDataAreas.xlt
SpecialPricesQuantityAreas.xlt
the default location when installing DTW is:
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oSpecialPrices
When entering Hierarchies and Expansions (renamed to Period and Volume Discount in Version 2007) you must enter *x for CardCode where x is the price list number.
3.) I can not find any information related to Hierarchies and Expansions in the diapi help file.
The information in the DI API file is under the SpecialPrices Object.
See below some general information regarding special prices:
SpecialPrices is a business object part of the Inventory and Production module under
Select Inventory > Price Lists > Special Prices > Special Prices for Business Partners.
OR
Select Inventory > Price Lists > Period and Volume Discount (Hierarchies and Expansions in previous versions)
Interesting points:
Source table: OSPP
DTW Template: SpecialPrices.csv
Mandatory fields in SAP Business One: CardCode and ItemCode.
PriceListNum is a foreign key to the PriceLists object - source table OPLN, field name ListNum.
CardCode is the Business Partner CardCode to enter Special Prices for Business Partners.
Child object of the SpecialPrices Object: SpecialPricesDataAreas (source table: SPP1)
DTW Template: SpecialPricesDataAreas.csv
LineNum (Field name LINENUM) - Always enter the appropriate LineNumber you want to update (starts from 0).
Child object of the SpecialPricesDataAreas Object: SpecialPricesQuantityArea (source table: SPP2)
DTW Template: SpecialPricesQuantityAreas.csv
LineNum (Field Name SPP2LNum). Always enter the appropriate LineNumber you want to update (starts from 0).
Hope that information helps a little. If you have any fruther questions enter the following information:
1. SAP Business One Version including Patch level
2. Do you get any error message after the import? What is the message returned?
Kind Regards,
Friederike Mundt
SAP Business One Forums Team

Connection between business partner and organisational unit

Hello,
I have a problem with the account integration in cProjects ( error message: Cost/revenue rate X is not valid in organization 00000000 ) and I think that there could be a problem with the treewalk from the business partner to the organisational unit.
I am using the transaction ppome to customize the organisational unit with the employess. Unfortunately I cannot see this connections when I am using T-Code PPSS to do the treewalk. Does someone know which evaluation path is the correct one for price evaluation?
Is it correct that the connection between the business partner and the organisational unit is:
employee <-> bp <-> org. unit? What is a good starting point to search for the gap between this chain?
When and what for is cProjects treewalking for the price? What calculation is cProj doing with it?
Thanks in advance,
Vanessa

The problem is solved due an incorrect business partner. So the question is obsolet, thx.

How , When and What is the significance of Business Partner's Sales Area Data?

Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei Vishnevsky

Hello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards

Problem in Creation of business partner

i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
i want to add mobile number but there is no any field such like mobile number in address data table.
But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
Please , suggest me what i do to store the data in direct communication instead of indirect communication.
Thanks for review my post...

Hi ilesh,
There are 2 kinds of communication data -
1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
2. Address independent - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
This should solve your problem.
Cheers,
Rishu.

Error while creating a business partner / sponsor

Hi experts,
I am getting the following error (same as the one posted by one of the other users) when i try to create a business partner in the 'sponsor' role:
Sponsor does not have a customer associated with it.
Because of this error I AM STUCK!!! and cannot move forward with the rest of the customization. I searched all the settings and researched this error - couldnt find anything useful.
Can you guys PLEASE HELP???
Thank you,
Ajay

Dear Ajay,
The sponsor should have a customer number behind
Please have a look at the online help:[http://help.sap.com/saphelp_erp60_sp/helpdata/en/8d/b6283b85b6666be10000000a114084/frameset.htm]
See Customizing Grantee Management ->GM-GTE Customizing: Master Data -> GM-GTE Master Data Customizing: Sponsor
You can adjust your customizing in a way to create the customer automatically at the time of creating the sponsor, or you can first create the sponsor and link it to a customer afterwards. This will depend on how the sponsor Role (Standard is PSSP01) is set.
you can find it in the IMG> Master Data Synchronization> Customer/Vendor Integration> Business Partner Settings> Settings for Customer Integration> Set BP Role Category for Direction BP to Customer
and check options 'Customer-based' or 'Optional for Customer'
Hope this will help
Kind regards
Mar

Creation of new fields for business partner relationship

Hi experts,
We are currently on SAP CRM 7.0 EHP1.
We have a requirement to maintain a custom checkbox (Relevant for business) on each business partner relationship.
Can you please let us know on how we can achive this requirement.
Thanks in advance,
Vamsi.
Moderation: Duplicated. I lock this one and continue here: [Create a new field in Business Partner Relationships|Create a new field in Business Partner Relationships#10795912]
Edited by: Joaquin Fornas on Nov 8, 2011 12:17 PM

Please, anyone can help?
Thanks!!

Error in creation of Employee for Business Partner

I am using SRM 4.0 and ECC 5.0. I have created Vendor Root Org EBP and replicated vendors from R/3 which is appearing in Vendor Organization in EBP.
Now when I am trying to create Employee as contact person in thru WEB transaction in EBP "Manage Business Partner".
After filling all mandatory info when I am saving the same and error popup is coming as given below:
"Central system not reached"
Can some body help analyze the same?
Thanks
Sanjay

Hi Vadim,
Following attributes are already maintained for Vendor Root in Org Plan :-
BUK
BWA
CUR
ITS_DEST
SYS
VENDOR_ACS
VENDOR_SYS
Beside this I have checked up availability of replicated vendors in VENMAP table with GUID.
First error message is coming:
"Central system not reached"
When I am defining Logical system and external business partner ID that is R/3 Supplier code than another error is coming :
"BP role BUOP001 already exists for partner XXX"
This XXX is running sr. no. of BP number range but do not appear in BP data base . And in next attempt next Sr. no. is blocked by system.
Problem is still persisting pls. suggest.
Sanjay

Creation of Business partner from customer

Dear Friends,
I am trying to create business partner from customer thorugh T-code FLBPD1 but unable to do so. Also. whenever i create a customer, a corresponding business partner is automatically created which is not desirable. Rather system should allow me to create business partners from customer separately when required. Kindly suggest any solution for the same.
Regards

Hi,
please have a look at this threat
[Auto creation of customer/vendor for BP;
or search the forum for other threats that are handling this topic.
Regards, Franz

Creation of Business partner by using the vendor master

Dear all ,
I have a requirement as follows. I Have already vendor master created in MM .Now the requirement is while creating Business partner I have to use this vendor as the business partner .
Can experts suggest the possibility of this .
Regards.
Arjun.

Hello Arjun,
Yes, this feature also works in 4.7. What has happened is that in ECC 6.0 the BP functinality has been totally redefined with a lot of automations. As such, if properly configured then in ECC 6.0 there is no practical use of the FLBPD/FLBPC Tcodes. However, in 4.7, both these traqnsactions should be working fine. The SAP ntes that I have mentioned are however only for ECC 6.0.
Kind regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Nov 27, 2008 4:02 PM

Creation of Business Partner through IDOC

Dear All,
I have to create a business partner which happens through Idoc of message type DEBCOR. My problem is that though I am getting the IDOC message as incoming type which is also getting processed however the creation of BP is not happening. Since IDOC is also showing in green as successfully processed, I dont have any clue where to check it. Any idea as to what could be the possible problem ?
best regds
Subha

IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

Creation of Business Partner with External BP #,ID type and Identifications

Hi Group,
I have a query on creation of Business Partner with External BP #,ID type and Identification # (along with the Firstname,Lastname,Email, Phone & etc.,) things.
the thing is that I was using a BAPI called "BAPI_BUPA_FS_CREATE_FROM_DATA", to create a BP and I was not able to have an option available for these things (External BP #,ID type and Identification # ) along with that BAPI.
So please kindly let me know how these things can be fetched from a BAPI which can accomodate all the above things mentioned.
Please kindly let me know how it can be achieved.
thanks in advance.
Regards,
Vishnu.

Hi Gerhard,
Infact this reply was very useful, but ,while using the BAPI "BAPI_IDENTIFICATION_ADD" while creating the Id type and Id #s, this BAPI was not enabling this.
I was trying to use this BAPI to create ID #, and it's desc, but, this BAPI was returning like "This BP # does not exist" (in some cases) and in some other cases, it is keeping quiet without giving any indication as whether the things have been updated or not... and also when I checked, things were not getting reflected.
your help would be very much appreciated.
thanks & regards,
vishnu.

Rounding Price in Business Partner

Similar Messages

Maybe you are looking for