Rounding Value is not considered for MB lot size

Hi
I have a scenario where MB (Monthly Lot size) lot size is used with rounding value. Example as below:
Lot size: MB
Min Lot size: 15000
Rounding Value: 20000
DEMAND: 16000
When MRP run, System is creating the 16000 as P Req instead of 20000 which is the rounding value.
Pl let me know, if I need to apply OSS note / any other solution for this.
Thanks,
JK
Edited by: Janakiram Katakam on May 17, 2010 4:57 AM

Dear ,
Are you using any Rouding Profile in MRP1 view ?
What is the Setup in OMI4 for MB-Lot Size .Remove the tick mark in Last Lot Exat if it is marked .By specifing the rounding value, the system will determine during lot size calculation that lot size qty is a multiple of of an order unit(eg : pallet size if mtrl is delivered in entire pallets...).
Please check what is the Lot Size Indicator or Lot size procedure assinged to it ?
2.you can use rounding profiles...its used to define the setting of rounding up or rounding down the order proposal qty into deliverable quantities...rounding profile maintenance the t-code is OWD1. Here for static rounding profile
Rounding profiles are defined under:
spro-> purchasing->consumption based planning->planning->lot size calculation ->maintain rounding profiles...
it consist of threshold value and rounding value...
the threshold val is the value from which the system rounds the value of the next deliverable units upto...
the rounding value is from which the systemshd round up to as soon as threshold value is exceeded...
Otherwise , Check FM MD_ROUNDING_VALUE
Regards
JH
Regards
JH

Similar Messages

Open Items not considered for Payment Lot

Hello Experts.
I have created some open items using FPE1. They are displayed as due in FPL9. But the same open items are not selected in FP06 for clearing. They are also not considered for clearing in a payment lot (FP05).
Can some one tell me what could be the reason for this
Best Regards
Venkat

If you have a clearing restriction, to be able to remove it when you change the document in FPE2 for example you need to activate that clearing restriction in:
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Open Item Management > Define Modifiable Clearing Restrictions
If you don't do that you cannot manually change it.
Adriano.
PS: Again are people in these forums that put answers to be in the statistics... GOD..

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

Excise base value is not picking for Imports

Dear All,
     Excise base value is not picking for Imports when doing MIGO and BED/E CESS/S&H E CESS also not picking.
          Please suggest me
Thanks,
Tiru

Hi,
In case of Imports, you have to define following condiiton types in MM Pricing Procedure;
JCDB     IN:Basic Custom Duty
JCV1     IN : CVD
JECV     IN : Ed Cess on CVD
J1CV     IN : H&SECess on CVD
JEDB     IN : Ed Cess on BCD
JSDB     IN : H&SECess on BCD
JADC     Addnl Duty of Custom
These should be created as a delivery cost condition in M/06. And assign the accruals to these in M/08.
Folowing Gl Accounts will be assigned to those accruals in OBYC;
CVD Clearing (For accrual of conditions JCV1, JECV, J1CV, JADC) and Customs Clearing (For accrual of conditions JCDB, JEDB, JSDB)
Now follow the below procedure for Import Purchase;
1. ME21N u2013 Create Import Purchase Order (Here assign the Vendor of Customs Office to the above mentioned 7 condition types in "Details" of "Conditions")
2. MIRO u2013 Enter Customs Invoice w.r.t. Import PO (Here select "Planned Delivery Cost" and do LIV for Customs office Vendor, enter values for duties as per Bill of Entry manullay during LIV)
3. J1IEX u2013 Capture Bill of Entry
4. MIGO u2013 Goods Receipt against Import PO
5. J1IEX u2013 Post Bill of Entry
6. MIRO u2013 Enter Vendor Invoice
7. MIRO u2013 Enter Clearing Agentu2019s Invoice

Sales Order is not consider for MRP in MRP Type PD and Strategy 40

Sales Order quantity is not consider for net requirement calculating in MRP.
My MRP Type is PD and Strategy 40.
Also in MD04 Sales order is not appearing.

Dear,
Requirements to MD04 will flow based on the settings you maintain in OVZ9 for the combination of "Availability Check" and "Checking Rule". Here whatever fields you choose under the tab "In/outward movements", that will be considered.
It may be because of Requirement type Missing at schedule line category level . In MD04 requirement are pass on Either Individually or collectively . In Case of Individual each schedule line create one entry in MD04 ( Stock Requirement list)
So check the materail master for checking group is maintain or not?
Please refer this thread also,
Re: Sale order not reflecting in MD04
After that run MRP again and check the result.
Regards,
R.Brahmankar

Error : This balancing segment value is not valid for the current ledger

Dear friend,
Error : This balancing segment value is not valid for the current ledger.
when I click Account Assignment in Budget Organization.
I used R12
Thank you
Best regards,
Hareyuya, Junior.

Hi,
Please see these documents.
Note: 756765.1 - Cannot Use Parent Balancing Segment Values In Massbudget or MassAllocation Formula
Note: 790339.1 - Cannot Select Parent Values In Mass Budgets
Note: 437588.1 - Rel 12: Balancing Segment Value Is Not Valid For Current Ledger
Regards,
Hussein

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

BSW% is not considered for correcting the transactional quantity

I solicit a little help from the Group. We have a Crude Vendor which is also in SAP platform . They have implemeted TSW and now Crude delivery tickets are generated from System.
On scrutinty of ticket It is observed taht BS&W percentage is not considered while calulating quantities in Transaction UOM.
Transaction code : O3QCITEST.
Conv. Group = ZCDR.=53&54A 15 °C CRUDE OIL
UoM Group = CRD.=L/L15/KG/BB6
Transaction Quantity = 100 L.
Material temp = 30 deg-C
Test temp = 15 Deg-C
Test relative density = 870 KGV.
With the above data if you put BSW% = 0, then additional quantities calculated are 0.622 BB6, 85.938 KG, 98.779 L15 , 100 L.
if you put BSW% = 0.5, then additional quantities are 0.618 BB6, 85.508
KG, 98.285 L15 , 100 L.
From above it is clear that the additional quantities in all units except in "L" change whenever the BSW% changes. This shows that BSW% is not considered in calculating the "L" quantity.
In actual practice BSW correction should happen for Transactional Quantity also.
If you have any solution for the above scenarion . please suggest.for necessary correction.
regards
Dipak
[email protected]

Dear Vishnu
You r right . Standard SAP behaves that way only. We modified badi OIB_QCI_ROUND_QTY
method: IF_EX_OIB_QCI_ROUND_QTY~ROUND_QTY
coding atatched.
Anyway thanks for reply.
METHOD IF_EX_OIB_QCI_ROUND_QTY~ROUND_QTY .
Local Data
TYPES: T_CTPARAM TYPE OIB_A10,
         T_ADQNT TYPE OIB_A05.
DATA: S_CTPARAM TYPE OIB_A10,
         S_ADQNT TYPE OIB_A05,
         S_ADQNTN TYPE OIB_A05.
DATA : L_BSW(72) TYPE C.
DATA: W_PAR_FLTP TYPE OIB_A10-PAR_FLTP,
        WF_BSW     TYPE OIB_A10-PAR_FLTP .
DATA: IT_PARAM TYPE STANDARD TABLE OF T_CTPARAM,
        IT_ADQNT TYPE STANDARD TABLE OF T_ADQNT,
        IT_ADQNTN TYPE STANDARD TABLE OF T_ADQNT.
DATA: W_TABIX TYPE SY-TABIX.
DATA: W_DIMENSION TYPE T006-DIMID,
         W_TEXT      TYPE T006T-TXDIM,
         W_MEINS     TYPE T006-MSEHI ,
         L_MENGE     TYPE MLEA-MEINH ,
         WA_PARAM    TYPE OIB_A10 .
*-----DATA DECLARATION FOR L15 START -
DATA : WF_ADQNT_L     TYPE OIB_A05-ADQNT,
         WF_ADQNT_L15   TYPE OIB_A05-ADQNT,
         WF_ADQNT_TMP   TYPE OIB_A05-ADQNT,
         WF_ADQNT_ROUND TYPE OIB_A05-ADQNT,
         WF_ADQNT_KG    TYPE OIB_A05-ADQNT.
*-----DATA DECLARATION FOR L15 END -
IT_ADQNT = TC_QT2TAB.
READ TABLE ITC_PARAM INTO S_CTPARAM WITH KEY FIELDNAME = 'UMRSL'.
IF SY-SUBRC = 0 AND S_CTPARAM-PAR_CHAR = 'ZCRD' .   " .   "AMP
    READ TABLE ITC_PARAM INTO S_CTPARAM WITH KEY FIELDNAME = 'MEINH'.
    W_MEINS = S_CTPARAM-PAR_CHAR.
    IF W_MEINS NE SPACE.
      CALL FUNCTION 'DIMENSION_GET_FOR_UNIT'
        EXPORTING
          LANGUAGE       = SY-LANGU
          UNIT           = W_MEINS
        IMPORTING
          DIMENSION      = W_DIMENSION
          TEXT           = W_TEXT
        EXCEPTIONS
          UNIT_NOT_FOUND = 1
          OTHERS         = 2.
    ENDIF.
    IF W_DIMENSION = 'VOLUME'.
      READ TABLE ITC_PARAM INTO S_CTPARAM
        WITH KEY FIELDNAME = 'BSWCN'.
      WF_BSW = S_CTPARAM-PAR_FLTP .
      READ TABLE IT_ADQNT INTO S_ADQNT WITH KEY MSEHI = 'MT' MANEN = ' '.
      IF SY-SUBRC = 0.
        W_TABIX = SY-TABIX.
        S_ADQNT-ADQNT =
                S_ADQNT-ADQNT * ( 1 - ( S_CTPARAM-PAR_FLTP / 100 ) ).
        MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT.
        TC_QT2TAB = IT_ADQNT.
      ENDIF.
      READ TABLE IT_ADQNT INTO S_ADQNT WITH KEY MSEHI = 'KG' MANEN = ' '.
      IF SY-SUBRC = 0.
        W_TABIX = SY-TABIX.
        S_ADQNT-ADQNT =
                S_ADQNT-ADQNT * ( 1 - ( S_CTPARAM-PAR_FLTP / 100 ) ).
        MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT.
        TC_QT2TAB = IT_ADQNT.
      ENDIF.
*-----Start BSW% in Litre Qty----
      READ TABLE IT_ADQNT INTO S_ADQNT WITH KEY MSEHI = 'L' MANEN = ' '.
      IF SY-SUBRC = 0.
        W_TABIX = SY-TABIX.
        S_ADQNT-ADQNT =
               S_ADQNT-ADQNT * ( 1 - ( S_CTPARAM-PAR_FLTP / 100 ) ).
        WF_ADQNT_L = S_ADQNT-ADQNT .
        MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT.
        TC_QT2TAB = IT_ADQNT.
      ENDIF.
*-----End BSW% in Litre Qty--
*---L15 start----
      READ TABLE IT_ADQNT INTO S_ADQNT WITH KEY MSEHI = 'L15' MANEN = ' '.
      IF SY-SUBRC = 0.
        W_TABIX = SY-TABIX.
        WF_ADQNT_L15 = S_ADQNT-ADQNT .
        WF_ADQNT_TMP = ( WF_ADQNT_L15 / WF_ADQNT_L ).
        CALL FUNCTION 'ROUND'
          EXPORTING
            DECIMALS      = 4
            INPUT         = WF_ADQNT_TMP
            SIGN          = 'X'
          IMPORTING
            OUTPUT        = WF_ADQNT_ROUND
          EXCEPTIONS
            INPUT_INVALID = 1
            OVERFLOW      = 2
            TYPE_INVALID = 3
            OTHERS        = 4.
        WF_ADQNT_L15   = WF_ADQNT_ROUND * WF_ADQNT_L .
        S_ADQNT-ADQNT = WF_ADQNT_L15 .
       MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT. " ---Blocked by Prasanta on 08-june-07
        MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT.
        TC_QT2TAB = IT_ADQNT.
      ENDIF.
*---L15 end----
*---KG start---
      READ TABLE IT_ADQNT INTO S_ADQNT WITH KEY MSEHI = 'KG' MANEN = ' '.
      IF SY-SUBRC = 0.
        W_TABIX = SY-TABIX.
        READ TABLE ITC_PARAM INTO S_CTPARAM
        WITH KEY FIELDNAME = 'BDICH'.
        WF_ADQNT_KG = ( WF_ADQNT_L15 / ( 1 - ( WF_BSW / 100 ) ) * ( ( S_CTPARAM-PAR_FLTP / 1000 ) - 11 / 10000 ) ) - ( WF_ADQNT_L15 / ( 1 - ( WF_BSW / 100 ) ) * ( WF_BSW / 100 ) * 9979 / 10000 ) .
        S_ADQNT-ADQNT = WF_ADQNT_KG .
        MODIFY IT_ADQNT   FROM S_ADQNT INDEX W_TABIX TRANSPORTING ADQNT.
        TC_QT2TAB = IT_ADQNT.
      ENDIF.
*---KG end---
    ENDIF.
ENDIF.
ENDMETHOD.

Value & is not permitted for attribute Sales Unit - Material Object

Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.

Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags

Value does not exist for "..." in connection...

Hello,
I have following issue using Design Studio 1.3.
I was changed my source of dashboard from universe to Bex Query.
When it was done I have received following Script Problem related to CheckBox
Description
Location
Event Script
Component
Application
Type
Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
Line 3
On Click
CHECKBOX_1
[rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
Design Studio Script Problem
Below please find the Script syntax:
if(CHECKBOX_1.isChecked())
DS_2.setFilter("GP_XSRCB", "Sourcable");
else
DS_2.clearFilter("GP_XSRCB");
I would like to note that this script on CheckBox works fine based on universe as a source.
Please advice.

Dear All,
I am also facing same problem, while doing PGI (Post Goods Issue)
Can any one help in this please.
And the error message was
Characteristic value SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
Message no. KE0C133
Diagnosis
The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
3. Characterstick PAPH4 cannot be maintained using KES1.
Thanks & Regards
Sahas

How to make zero value deliveries not relevant for billing

Hi,
I have a requirement to not print invoices that have zero as their net value. Right now there is a sales order line category that can have amount on it sometimes and sometimes not. When the amount is 0, is there a way make it not due for billing?
In Item Categories Maintenace I set the Billing Relevant to H:
"H: Delivery-related billing - no zero quantities
You can use this category to avoid items with a value of zero being included in the billing document."
Testing it still includes the items with 0 value for this item category in VF04 - billing due list and creates an invoice for it.
Thanks,
Sergiy

Hello
we will have the copy control routines in the copy control requirements between delivery and billing, check out the transaction VOFM , for example you can have a new copy control routine no 901 in VOFM. via which SAP creates a new program LV60A901 and you can have your code there. Get in touch with your programmer he/she should be knowing how to create this and how to include this in the main program..
Let me know if you need more information
Regards

KE0C133 : Characteristic value does not exist for charact KMVTNR

Hi Gurus,
In my system i have the field CO-PA KMVTNR, assigned to KNVP - LIFNR.
When i try to create a shipment cost, i get the error: "The characteristic KMVTNR (Sales employe) should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value is not valid in CO-PA."
I have debbug, and the problem is that in report RK2FVPKE, check that my value is not a valid PERNR. And it is not, because i am assigning a lifnr number not a pernr number.
I not allways get this error, when i create the same shipment cost in other case. What make that the system check that the value is a valid pernr or not?
thanks

Hi Luis
To me, it seems logical that if the pernr is not there, the system gives you an error
In the cases where it did not, can you check if valid pernr exists?? If you create a wwxxx char "without own value maint", it should not check for the valid pernr. But with kmvtnr, I am sure it will check
Br. Ajay M

Lov Values are not showing for Discoverer Reports in Application

Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.

Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West

Rounding Value is not considered for MB lot size

Similar Messages

Maybe you are looking for