Routing does not match selection ID 01

Hi all,
I have query while run the costing (CK11N) for Assembly Material. Error displays as "Material X: Routing does not match selection ID 01".
This Assembly Material has Routing with 2 Direct and 5 In-direct opeartions as well as defined the Labor for Direct Operations with respect to the CC assigned in WC.
Can anyone help me out why this error occurs?
Regards,
Sundhu

Dear Sundareswari,
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
>check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Check and revert
Regards
S Mangalraj

Similar Messages

Message 476 Routing does not match selection

Hi
I am just starting to try and learn some CO for material cost estimates. I am trying to get a planned cost estimate that shows a labor cost component and machine hours cost component. I think I am not seeing it because of this message.
Can anyone tell me just what this is for or guide me on what I need to do to get the cost compnents i wnt on my estimate.
Wayne

Hi
Hope this brief helps
Standard cost estimate is a tool for establishing prices for materials. It is used to calculate the costs of goods manufactured and the costs of goods sold for each product unit.
In order to establish the cost estimate with quantity structure of a material, the bills of materials and routing of the material must exists for the materials to be costed.
The cost estimate with quantity structure uses the material master data to determine the material consumption and internal activities required to produce the product.
Costing calculates the cost of goods manufactured for each material made in-house in the BOM structure.
Preliminary cost estimate is done in planning cost stage so as to know how much we need to produce the materials. This is as good as planned cost and once the production is finished, the Standard cost estimate is done periodically to update the finished material price in the materials master.
Whereas SAP provides in built facility of mixed costing by entering mixed ratio for production versions. In order to utilize this, REM backflush is to be done using data from the preliminary cost estimate of the production version. Postings will be done with the data available in the preliminary cost estimate but the material can have a standard cost estimate which will have a weighted average cost estimate depending upon the mixed ratio of the production version maintained for the material. Main advantage of using mixed costing is, it can valuate in-house manufactured inventory with precise costing and update stock values in balance sheet.
Reg
Suresh

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

The parameter name [...] in the query's selection criteria does not match..

Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)

Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to     @Id
    @Column(name="departmentID", nullable = false)
    private Integer departmentID;or change Employees' ManytoOne annotation to:
    @ManyToOne
    @JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
    private Departments departments;Best Regards,
Chris

Paper detected does not match paper size or type selected

Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

Hi,
Try updating the printer firmware, the latest version should improve its paper handling.
Follow these steps to get the latest update for the printer and then check for any differencex:
http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer---H711a/H711g/4322968/mod...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Hp pro 8600 error Paper detected does not match paper size or type selected .

hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one . There has been no change in the paper always used in tray one. Prints documents with no problem from Tray One with same paper. Copies from Tray 2, same paper, no problem. Have restarted the printer, same error. When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

Hello marathonmama,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Mismatch error on the printer.
Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

CS4 Upgrade, the serial number you have entered does not match the product you have selected

I have a valid CS2 premium license and have installed CS4 upgrade to a new machine but get the dreaded error "the serial number you have entered does not match the product you have selected" Now I got this error when I originally installed in 2009, back then I could call customer service and get the problem resolved but now when I phone I get an automated message saying phone support is not available for CS4? Does anyone know of a work around or a UK number where I can get this resolved? Any help would be appreciated.

Please see: http://www.hp.com/country/us/en/mda/windows7/upgrade/index_ww.html to select your correct country or region.
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One. I keep getting the message shown above on the screen.

Hi @nunzio317
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

The software that you choose does not match the Selected Printer

Hi Friends,
I am trying to install a network Printer suing my Win Xp SP3 PC.
Since there is no drivers installed in this PC, I tried to select Have Disk option in the Bonjour Printer Setup Wizard and selected the INF file provided by the Manufaturer. When i select the INF file and click ok, It prompts with message "The software that you choose does not match the Selected Printer".
But the Manufaturer name is listed under the Manufacturer Tab and nothing on the Model Tab.
Any idea why i am getting this error message. Please help me if anyone is aware of this.

I haven't seen Apple use a "shared secret". and believe this must be a message from the magazine app. I suggest asking the magazine, as this appears not to be an Apple problem.

Cisco ASR1004 error %VRF specified does not match existing router

Hi all,
I have a problem and I really do not know the reason.
Simple scenario. I need to configure ospf into a ASR1004 router.
Here the command
vrf definition TEST-02
address-family ipv4
exit-address-family
interface Loopback25
description TEST-02
vrf forwarding TEST-02
ip address 1.1.1.1 255.255.255.255
ip ospf 2 area 0.0.0.1
As soon I am running the command ip ospf 2 area 0.0.0.1, I got this error %VRF specified does not match existing router.
I configure with success other different vrf before and after this problem so I can not understand why the router is refusing this configuration.
Any idea?
Thank you.
Regards,
Fabio.

Hello.
Your OSPF process 2 (in global configuration mode) should be configured with vrf keyword like following:
router ospf 2 vrf TEST-02

Need help urgently!! - "The selected file cannot be linked because its type (video) does not match t

Hey guys... I need your help!! I started a project using Premiere Pro 2 and was 80% when I formatted my computer (all my project files were always saved to a external hard drive). Anyways instead of installing Premiere Pro 2, I installed Premiere Pro Cs3. Problem is whenever I try starting up my project it asks me to link every file used. When I do this it says "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." I took my external harddrive to friend's house who has Premiere Pro 2 and it says the same thing. Why did this happen? Is there anyway around it... Any help would be greatly appreciated, I put over 20 hours into editing this movie... I don't want it all to go to waste.

Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Hi I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail. *entered security key/password does not match the one set for for router. I know th

Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
Regards

I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

So I decided to try and 'Edge up' since I was practically at the mark. Seemed to go fine until I select my new device, then I get 'This device does not match the device ID on your original Edge Agreement.'. Odd because I've never switched phones, and i'm

So only a few bucks left for the edge upgrade, decided to edge up since it gave me the option to do so, I figure why not?
Process seems to go fine until i'm in the checkout for a new device.
Tosses 'This device does not match the device ID on your original Edge Agreement. ' at me, but it's really strange because I'm using the phone I got direct from Verizon, haven't switched phones or anything.
Has anyone had this issue before?

Toxicle,
I can understand how something like this can be concerning. Let's work to get to the bottom of this for you. What kind of phone were you Edging up from? Has the phone ever been replaced or removed temporarily? Just want to make sure we are getting all the facts to help with this issue.
CandiceH_VZW
Follow us on Twitter at @VZWSupport

Routing does not match selection ID 01

Similar Messages

Maybe you are looking for