Rows are not inserting from Loop

Dear Friend,
This is nice to see the discussion forum from Oracle,
I have a problem with loop that after fetching columns into variables the only one row is inserting in the form not more than one.
For example: I select code 1 from LOV for insert its all record in the form but only one row is inserting.
Any comment will be appreciated.
Regards,
Zohaib.

Hi,
Pls explain....
Jeneesh

Similar Messages

Rows are not inserted in the order entered - Forms 4.5 to 9i database

hi
we are using forms 4.5 version with 9i oracle database.
when we save a multi-record block (for eg 5 rows)
the records are not inserted in the database in the
order in which they are entered.
for eg if we enter A,B,C,D,E Records and save
on query the records appearing in the order of C,D,E
A,B like that.
Is there any database parameter or setting which
effects the order of inserting rows in the database(when using forms 4.5).
Pls inform if you have any solution.
Thanks in advance
cks

This is a very common misconception.
You should never concern yourself about the order in which rows are stored in the database. Oracle does not guarantee to return rows in any particular order so you must specify an order by clause when you select the rows.
Without an order by clause, there are various reasons why the order of selected rows could change in different circumstances, and the order in which they are stored should be treated as irrelevant.

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
Both devices have the Icloud on.

Try this on All Devices...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Created a trigger but new values are not inserting in the backup table

I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;

old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net

Messages are NOT deleted from tables XI_AF_MSG and XI_AF_MSG_AUDIT

Hello,
I set the retention period to 7 days (1 week)
I also set the default ARCHIVE and DELETE jobs and ALL are working fine.
However, messages with OLD dates are NOT deleted from the tables XI_AF_MSG and XI_AF_MSG_AUDIT.
These tables 32GB in the DBD table space.
I tried to use the URL:
http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
BUT to NO avail.
How do I DELETE or ARCHIVE these messages ?
============================================
Here are some more details on the content of the tables (I took into account 1 MONTH retention):
db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='SUCC' and TIME_STAMP < '2007-09-10 00:00:00'"
      28947
1 record(s) selected.
db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='ERR' and TIME_STAMP < '2007-09-10 00:00:00'"
      13243
1 record(s) selected.
db2 "select count(*) from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='NDLV'"
       1048
1 record(s) selected.
db2 "select count(*) from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='DLVD'"
          0
1 record(s) selected.

Hi,
First, thank you VERY much for answering.
Now to your questions:
1. When using the URL:
http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
    I did NOT get any ERROR messages.
    Thousands of messages where DELETED successfully.
    However, the number of rows in XI_AF_MSG_AUDIT did NOT reduce.
2. I used the default archiving and deletion customizations and jobs.
   However, I ran them manually a few times a day with NO change in the
   number of rows in XI_AF_MSG_AUDIT
   What do you mean by "customized any Archiving for adapter Engine" ?
. In RWB, I do see the default job is running
Have you customized any Archiving for adapter Engine or You are using default arciving which runs every 24 hrs.
3. I did ser the retention period for the adapter engine messages in visual admin in seconds...
Please, advise further.
Kind regards,
Gil

Records are not inserted into MTL_TXN_REQUEST_HEADERS,MTL_TXN_REQUEST_LINES

Hi all,
I am doing pick release thru API.
For that , I have run following API successfully but my problem is that records are not inserted into MTL_TXN_REQUEST_HEADERS , MTL_TXN_REQUEST_LINES
tables so that I cannot generate the move order. Can anyone suggent the valuable tips for that ?
1. WSH_DELIVERIES_PUB.create_update_delivery
2. WSH_DELIVERY_DETAILS_PUB.Detail_to_Delivery
3. WSH_PICKING_BATCHES_PUB.CREATE_BATCH
4. WSH_PICKING_BATCHES_PUB.RELEASE_BATCH
5. WSH_DELIVERIES_PUB.Delivery_Action ( for p_action_code = 'PICK-RELEASE' )
regards with thanks in advance
sanjay

Hi All,
To create a Move Order Header & Line Record in MTL_TXN_REQUEST_HEADERS and MTL_TXN_REQUEST_LINES tables , I have run an seeded
procedure : CreateMoveOrderHeader & CreateMoveOrderLines .
The procedure : CreateMoveOrderHeader was run successfully but when I am going to run procedure : CreateMoveOrderLines , it is giving
an error .
Following Error text I am receiving at the time of running of procedure : CreateMoveOrderLines .
Initialized applications context: 5707 50138 660
*==========================================================*
Calling INV_MOVE_ORDER_PUB.Create_Move_Order_Lines API
*==========================================================*
Return Status: E
Error Message :INV
*==========================================================*
From the above error message, no specific error is received . Only " Error Message : INV " is received hence it is very difficult to judge & resolve an error .
Can anyone guide me that what is an error ? For what reason I am getting an error ?
regrads
Sanjay

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

How can I transfer some songs from my ipod to my itunes library although they are not purchased from itunes store?

How can I transfer some songs from my ipod to my itunes library although they are not purchased from itunes store?

By using one of third-party programs discussed in this previous discussion:
Best iPod to PC

I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
This question was solved.
View Solution.

Hi,
Try a clean installation of the flash plugin/activeX as follows.
First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
Flash Player Uninstaller.
When the download has completed, close all browser windows, open your Download folder and run the uninstaller. After this has completed, restart the notebook.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
When the installation has completed, restart the notebook.
If the above doesn't correct the issue, then try the following.
First of all, download and run the Shockwave uninstaller on the link below.
http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
After this has completed, restart the notebook.
When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
http://get.adobe.com/shockwave/
Again, after this installation, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Itunes was reinstalled on my MacAir and in the process my playlists disapeared. How can I sync theses playlists which are still on my Ipod back to the iTunes library? PS: these are not purchased from iTunes, they are my own cd's.Thanks.

Itunes was reinstalled on my MacAir and in the process my playlists disapeared. How can I sync theses playlists which are still on my Ipod back to the iTunes library? PS: these are not purchased from iTunes, they are my own cd's.Thanks.

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

Reports are not called from form in browser plz help

Hi,
I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
from as,
Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
My database is installed in drive E:\8idb_home\ and 9iAS is on
G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
Plz help!
Many thanks!

Hi,
First of all thanks to Vincent Botteman for solving the prob.
Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
Regards!

I am constantly told by Itunes that 107 items are not synching from my contacts. This is a message from the Conflict Resolver that appears whenever I synch. I try to resolve the synch and a text message pops up telling me it could not find the synch serve

I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
Thanks

Try here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing

Deleted attachments are not removed from Content Server

We have setup Content Server to store business documents and create attachments in documents in CO. Both types are stored ok and can be opened without any problems. After deleting them though, they disappear from the Attachment List but when looking in CS, attachments created on the document still exist in CS. Stored business documents on the other hand are removed properly.
Looking at statistics in CSADMIN shows that the deletion of the created attachment does not increment the "delete" counter.
Any ideas on why the created attachments are not removed from CS upon deletion?
Thanks

We have solved this issue now. By design, the attachments are not removed directly from the content server upon deletion; Instead you will need to run report RSBCS_REORG to completely remove them from the Content Server.
Edited by: Christian Nordvaller on Jan 26, 2010 3:53 PM

Rows are not inserting from Loop

Similar Messages

Maybe you are looking for