Rows ino Columns using BEX query

I got DSO with declaration records. Every declaration can have several versions, say:
DECLR_ID VERSION   AMNT
1111                 01         1000
1111                 02         1100
1111                 03         1500
1112                 01         5000
1112                 02         4999
I need a query to compare final version with corrections (previuos to last versions). The result table must look like this:
DECLR_ID VERSION   CORR_AMNT      FINAL_AMNT        DIFF
1111                 01         1000                     1500                 500
1111                 02         1100                     1500                 400
1112                 01         5000                     4999                   -1
is it possible by query designer to get results like this by not using any InfoSet?

Hi,
There is one possible provided if the version are less,
Create the restricted KF, for each version where in keep amount as common in all RKF. Then create the calculated KF again for getting the difference of Last version Restricted KF and starting Restricted KF and continue the same for remaining keeping the Last version Restricted KF as common.
Hope this may work. Try it.
Regards,
Vishwa.

Similar Messages

Converting rows to columns using dynamic query.

I am trying to use the below code that I founnd on the web to conver rows to columns. the reason that I want to use dynamic query is that the number of rows are not know and changes.
declare
    lv_sql varchar2(32767) := null ;
begin
    lv_sql := 'SELECT Iplineno ';
    for lv_rec in (SELECT distinct vendor from bidtabs where letting = '10021200' and call ='021')
    loop
        lv_sql :=   lv_sql
                    || CHR(10)
                    || ', MAX( DECODE( vendor, '
                    || chr(39)
                    || lv_rec.vendor
                    || CHR(39)
                    || ', bidprice, NULL ) ) as "'
                    || lv_rec.vendor
                    || '" ' ;
    end loop;
    lv_sql :=   lv_sql
                || CHR(10)
                || 'FROM bidtabs where letting = ''10021200'' and call = ''021'' and lineflag = ''L'' '
                || CHR(10)
                || 'GROUP BY iplineno ;' ;
here is the result
BIDPRICE     CALL     IPLINENO     LETTING     VENDOR
9,585     021     0010     10021200     C0104
1,000     021     0020     10021200     C0104
1,000     021     0030     10021200     C0104
17     021     0040     10021200     C0104
5     021     0050     10021200     C0104
11,420     021     0010     10021200     K0054
1,100     021     0020     10021200     K0054
1,100     021     0030     10021200     K0054
5     021     0040     10021200     K0054
3     021     0050     10021200     K0054
8,010     021     0010     10021200     V070
900     021     0020     10021200     V070
1,320     021     0030     10021200     V070
11     021     0040     10021200     V070
3     021     0050     10021200     V070
and here is the desired output
CALL     IPLINENO     LETTING      C0104              K0054              V070
021     0010     10021200      9,585                     11,420                                   8,010
021     0020     10021200      1,000       1,100     900
021     0030     10021200      1,000     1,100     1,320
021     0040     10021200       17     5     11
021     0050     10021200      5     3     3

Here is the error message I am getting:
RA-06550: line 22, column 43:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted delimited-identifier>
<a bind variable> << close current delete fetch lock insert
open rollback savepoint set sql execute commit forall merge
pipe

Created Webi report using BEx Query.

Hi All,
I am going to upgrade in BW and using BEx & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
Can anyone tell me how to test data?
Regards,

Hi,
compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
Thanks,
Amit

How to build and publish a webservice using Bex query?

Hi Experts,
Can anyone tell me how can i step by step to build and publish a webservice using Bex query,
so another application can call this webservice.
thanks.

There i already a web service called query_view_data for the same available as delivered by SAP...

Using Bex query through Query Browser - add result set to Cell range?

Hi all,
I have up to now used Xcelsius on NW with BICS connection towards BEx queries.
When I use this connection via Data Manager in Xcelsius, I'm able to use the Cross-table functionality to insert my entire dataset into a cell Range.
But now I have an requirement to save my Dashboards on the BO server, so I need to go through Query Browser to extract data from SAP BW to my Dashboard.
When inserting the query in the Query browser and I want to assign the data to Excel ranges, it seems like I need to do this for each individual Infoobject and Key Figure. Since I have many Key Figures (30-50), this is a lenghty process.
Is there a way to insert the entire dataset from Query into a cell range (both rows and columns), or do I need to do this for each Key Figure as indicated in the screen shot above?
--> I know that the Query Browser flattens my cross-table from the Query, but still, it should be possible to avoid to input all my Key Figures (30-50) individually to corresponding cells in my Excel part of the Dashboard.
regards
Oddmar Lid
asdfasf

Hi Oddmar,
If you want to display the data retrieved from the query you could map the data using the Query data.
Pull scorecard component (for example) and in properties if you see the Display data click on the dropdown and select Query data.
Hope this helps !

How to color Rows and Columns of BI Query

Hi to all,
I have created BI query in query designer, with 2 structures for rows and Columns.
Now I need that certain rows can be colored orange and certain columns as green color.
I knew that it can be done in Query designer, but slice and dice reporting can not be done, which I required in my report.
Is there any way I can do in WAD.
or any other way to do that.
i shall be thankfull to you for this.
Regards
Pavneet Rana

Hi Rana,
You can do the coloring of KF values using the report designer tool.
Check the below links
http://help.sap.com/SAPhelp_nw70/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
[Creating Formatted reports using BEx Report Designer|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00ae5173-6112-2d10-d78f-e7779d269f25?QuickLink=index&overridelayout=true]
Regards
KP

Doubt on Rows and Coloums in BEx Query Designer.

Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharp

yes i am Doing Offest.
I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks.   in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
         Colums--> Forcast ( User Entered year )          Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks

Which is better to use: BEx query or Web Application as an iView in portal?

Hi gurus!
Are there any experienced opinions, which is better - publish a BEx query in portal or publish a BEx Web Application in portal? Is it easier to alter the layout attributes etc. if I create a BEx Web Application first before publishing?
What is the way of fixing for example filter item height if I publish BEx query in portal - is there a Web Application that it uses anyhow which I can fix? Or can I use in that case iView -properties in portal?
Thankful for advice
Sari

ok, means i can use jsp:useBean tag for all my
classes that are not actually bean. so it will be
instantiated at run time and provide efficiency .No. Jsp:useBean is used for java bean components.
>
but when should i use import statement in my jsp and
it happen at translation time so will it create any
type of burden for my code if i import multiple
classes.For non-java beans, you need to import the classes, period.
It's not a burden, it's a necessity.

How to use BEX query in BI data archiving?

I see some power point presentations about the use of BEX query in the archiving customizing setting.
But the presentations have no text about the details.
Can somebody help detail how to use BEX to customize archiving objects?
Thanks!

Yeah I would be interested in such a solution as well.
Can anyone help here?
Cheers,
Andreas

#Multivalue Error on Webi when Using BEx Query

Hi All,
I have created a Webi Report on top of SAP BW BEx Query. I have created a variable in Webi on top of a dimension. When I add that variable in the report block some of the Measures are showing as #Multivalue. I know we can get rid of this by creating a universe and then changing the properties of the measure to sum. However we do not plan to have a universe and would want to make the changes in the BEx query or in the Webi Report whereever applicable.
Kindly suggest the solution at the earliest.
Regards,
James

HI James,
Creat Variable =
=sum(Tonumber([Dimension]))
use this variable in report , it will help you
Regards,
Mahi

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

WebI Prompts using BEx Query Variables

Hello,
I have the following issues with WebI report selection input paramaters (prompts) that use BW BEx Query variables. Could anyone please assist?
Issue 1:
The WebI report has one mandatory and two optional input paramaters (all paramaters from BW BEx Query). When I execute the report via WebI rich client directly, enter the value for mandatory input parameter and leave blanks for both optional input parameters, the report ran OK and has no issue. However, when I ran it through CMC a strange thing happen: I could not select the value for mandatory input paramater as it requires to have values for both optional input paramaters first (which I wish to have them blank and optional). When I refersh values for the mandatory paramater, it says "List of Values for current prompt requires values for following prompts:...(ie. the two optional parameters).
Anyone has any idea - it seems like it is a CMC issue for the WebI...
Issue 2:
Take the same WebI report above, the issue here is the order sequence of the prompts (ie. the selection input parameters). How can we change/control the sequence of the prompts? Whatever sequence of the varaiables (input paramters) in BW BEx Query, the WebI ignores it. Please advise.
Thanks & Regards,
Andy

I did not see separate thread for issue #1, therefore I'll us this thread.
I am running into similar issue when I get an error message ''List of Values for current prompt requires values for following prompts: <Name of the prompt>".
We are using BO V4, SP2, Patch 10 with SAP BW as DB via BEx queries.
I opened support ticket for this issue since obviousely it's still an issue after applying patch 10.
It's not an issue when 'Rich Internet Application' option is selected to view report in 'Reading' mode (via Launchpad Preferences then Web Inteligence; defautl value for viewing is 'Web').
I have not tried to use Client tools but even if it works with Client tools - it is not a solution for us. Our company does not plan to install client tools on end user computers.
Bigger issue us is that report scheduling invokes Web version (not Rich Internet Application). Therefore we cannot schedule report that is giving us problem described. I tried scheduling report from Launchpad and from CMC and both game me error highlighted.

Count Rows before Excecution of BEx Query

Hi all,
I would appreciate it if someone could help me in the following matter:
I have a BEx query with a large number of rows / records (sometime about more than 100.000 rows) depending on the selection in the selection screen. I would like to count the number of rows of the selection before excedcuting this query in order to send an error message, so that the user needs to make a new selection with less rows due to the fact that we get short dumps. The problem I have, I cannot find a function module or something else to get the number of the selected rows.
Can anyone help me to solve this????
Best Regards
Abdel

Hi all,
I have solved the problem. I have modeled a DSO with all data of all my Cubes and wrote a programm in the User-Exit for reporting variables that counts the selected rows before excecuting the query. A warning message is also programed, when the user choses too much rows.
But thank you for triying to help me.
Best Regards
Abdel

Using Bex Query with cell definition with WEBI

Hi,
Currently I am using a Bex query as a datasource for a webi, normally this works ok but I am having trouble with one particular query.
This query has cell definitions defined in the query. When i import the query into WEBI I get an MDX error.
Any suggestions?
Thanks
Flash

Hi,
We do not see all elements of the BW query in the universe, just those not using cell definitions.
We are currently on Business objects XI 3.1
Using BW 3.5
And the query runs fine using RSRT, it does show some asterix for some of the values but this can be removed by filtering on currency type in BW report
Thank You,

Highlight columns in bex query

Dear all,
I have a question: when I structure my query in BEx analyzer, even if there's the field in key figures properties (<b>highlight rapresentation</b>) and even if I check this box (the column wuold be in colour blue), really doesn't happen anything in query, the column is white.
If someone has a solution, please write me.
Thanks to all,
Alessandra Mirone

Hi Alessandra
Could you please let me know the details of the front end patch so as to solve the problem.
I am getting the columns of all query output with background blue. and wish to have a white background for them.
Your answer will be appreciated
Regards
Shalabh

Rows ino Columns using BEX query

Similar Messages

Maybe you are looking for