"Rows to Repeat at top" Not Available in Excel 2010

Hello, All!
Here I am with another question... Maybe someday when I grow up, I'll be able to
answer a few questions! ;-{)
I am creating a PDF via Adobe Acrobat Professional 9 and Excel 2010 and want to have the title row appear on the top of each of the 140+ pages, but when I go to the
Page Setup and select the Sheet Tab, the
Rows to repeat at top is unavailable.
Excel was fully installed as part of Office Professional Plus 2010 and Acrobat was fully installed as part of Adobe Design CS4.
Thanks in advance for your help!

Hi,
Based on my research,
if you have more than one worksheet selected, the
Rows to repeat at top and Columns to repeat at left
boxes are not available in the Page Setup dialog box. To cancel a selection of multiple worksheets, click any unselected worksheet. If no unselected sheet is visible, right-click the tab of a selected sheet, and then click
Ungroup Sheets on the shortcut menu.
Quote from:
http://office.microsoft.com/en-us/excel-help/repeat-specific-rows-or-columns-on-every-printed-page-HA010342842.aspx
Jaynet Zhang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedbackhere.

Similar Messages

"Rows to repeat at top", in Page Setup/Sheet disabled in Excel 2010

I have read all of the postings on this question. I am having the same problem! However I do not see any solution. I see a lot of "I think's", or "try this'", but no clear cut-solution. Let me restate;
I am running Excel 2010 in Office Professional:
I want to print a long spread sheet and I would like the title row repeated on the top of each page. I specify the print area range. The first row is frozen, so that when I scroll through my work on screen, I can differentiate the column information by having
the first row frozen. I want this to happen when I print this long document.
I go to print and go to Page Setup. I select the "Sheet" tab. The Print address bar area is disabled (grayed), but my print range is there. Under "Print" Titles", both selections are disabled (grayed); "Rows to Repeat at Top" and Columns to Repeat at Left"
are unavailable for selection. The address selection button on the right, of each of these three address range bars are also disabled (grayed).
This worksheet is on my hard drive. It is the only worksheet in the file. When I click on the worksheet tab, it does not say "Ungroup Sheets" which means that sheets have never been grouped.
I have been using Excel since Excel 95. I have done this many times in past versions, and it is a relatively simple procedure. Does any know why I can not access this feature in Excel 2010?

Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!!

Powerpivot add-in menu does not show in Excel 2010

To whom it may concern,
Sometimes, excel.exe *32 is left in the windows 7 professional task manager but all excel sheets are closed (sometime VB script opens excel sheet, and then close the excel sheet); then, manually open an excel sheet 2010 with powerpivot add-in,
powerpivot add-in menu does not show in Excel 2010. If excel.exe *32 is deleted from task manager manually, then, open Excel 2010 with power-pivot add-in, the powerpivot add-in menu is always visible. Try to figure out why excel.exe *32 is still left running
in the task manager.
jianmin chen

Ed, I read your reply. I thought about closing it before, but today I still experience the same issue after I reinstall the powerpivot for Excel 2010.
I came cross powerpivot error: unable to load the table in the powerpivot windows when the excel sheet is opened, yesterday it worked fine. After I reinstall powerpivot for Excel 2010, SQL 2008, the issue goes away.
And I tried to use pivot table instead of powerpivot in Excel 2010, and then plan to write stored procedure to build some relationships used to set up in powerpivot windows; so, I am still planning to use excel sheet, instead of writing a windows form application.
Try to get more experience in excel.
jianmin chen

Quick Parts from Word 2010 not available in Outlook 2010?

Kinda feel daft asking this...
If I type a Autotext (Quick Part) in Word 2010 it doesn't seem to be available in Outlook 2010 and vice versa. Each program seems to be using it's own default template. Saving it to Building Blocks.dotx also makes no difference.
From what I've found looking around the internet it seems this is intentional and the only way to get me AutoText from Word 2010 is to copy the Normal.dotm to NormalEmail.dotm is this right?
Thanks in advance.

Hi,
Your question is not daft! You are right in that there are two templates that are used for Quick Parts. Indeed very annoying because why would you have to insert the same autotext twice right? Unfortunately this is how we stand now.
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

SCJP 6 Exam not available after August 2010 in my country (from prometric)

Hello,
I am preparing for the SCJP 6 exam, but when I visited prometric.com to schedule an exam, there was NO date available after August 2010 - for my country.
Does this mean something? According to Oracle's FAQ page regarding certifications all is well and existing Sun Microsystems Certs will be available.
Regards,

Or better yet, contact Oracle or Sun educational services...
Oracle stated that Sun certifications will remain available, and there's no reason for them not to do that (in fact, those certification exams are a major source of income).
But it's quite possible that Oracle will be integrating them in their own certification system which afaik doesn't use the services of Prometric.

Create PDF Acrobat X Pro - does not display embedded excel 2010 tables in word 2010 properly

Hello,
I bought Acrobat X Pro and the first document I used 'Create PDF' on was a Word 2010 document with embedded (read linked) Excel 2010 tables.
When I opened the document after creating it the linked tables had a little arrow in the corner of a white box with a help text message of "click here to activate". The pdf is basically unusable.
Is there a setting to ensure that these embedded excel tables are created as normal tables - I do not want to have to keep pasting in tables/images into my Word documents when they are all updating automatically.
Thanks in advance for any help you can give me.
Regards,
Craig

Hello,
i am having exactly the same issue with Acrobat X Pro - with linked Excel 2010 tables in Word 2010.
Has there been a resolution to this eissue - it is potentially very time consuming to work around this issue for me.
I would post my files but I don't know how to attach them to the thread - only my second post .
Cheers,
slobbering_dog
This is the Word File - the table is an Excel 2010 spreadsheet linked (via Paste Special >Link) .
This is the resultant PDF file:
Thanks in advance - again !!
Message was edited by: slobbering_dog_72

Adding instances: repeat a subform not available

Hello,
where's the problem when I can't reapeat a subform. Sometimes I can, sometimes not?
And I thought I'm ready

Got it :)
If you have a subform in a subform like I have then you have to put both floated

"Document Not Saved" Microsoft Excel 2010 SP1

We have a remote office which has a 2mb WAN link, The users in the remote office have a variety of Office installs from 2003 to 2010 SP1.
When attempting to open an excel file over the WAN link (The file is on our main shared drive in Sydney) they can open and edit the document however when it comes to saving they receive "Document not saved" and the original document is gone and a .tmp file
remains where the original file was on the network drive/shared folder.
If they then hit save a second time it saves correctly and the document is in the correct .xls format.
The excel files do have some funky tables etc in them and are a few mb's in size, however we have the same issue with a new excel document with only one word written in it.
Does anyone know what would be causing this issue?
We have tried added NetworkResiliency and PivotTableNetworkResiliency as per http://support.microsoft.com/kb/291204.
We have tried removing certain hot fixes from Microsoft as mentioned in http://support.microsoft.com/kb/983458.
We added the share to be a trusted site.
There are no errors in Event Viewer.
I have found another few threads on similar issues with no fix:
http://social.technet.microsoft.com/Forums/en-US/office2010/thread/f559b061-b98f-4b33-ab8a-d1a41d2e8cb8/
http://social.technet.microsoft.com/Forums/en-US/officeappcompat/thread/4af962a0-d883-4e82-8995-7eb766d6c720
We do have a RiverBed at the remote office and one at the site in Sydney which is for network optimization. On the RiverBed with have all CIFS ports added and QoS marking done so it should be optimized.
Any assistance with how to fix this annoying issue would be greatly appreciated.
Thanks

We're having the same exact issue in our office where we just installed a new Riverbed Steelhead as well... only happening in that office as well...User opens a document on a network share that the rest of the company works from day to day, they save 10
or 20 minutes later and BAM... "There has been a network or file permissions error. The network connection may be lost", then a non-hidden *.tmp file is then created in the same network directory as the actual file and the original file doesn't get
written to, you click [OK] on the error and then try to save again and it magically works...and you're left with a messy TMP file as well in the directory now. I doubt it's related to antivirus, definitely not firewall, reinstalling/repairing office and tweaking
settings doesn't help, I agree it has nothing to do with locking files or read-only files as they're plain old word docs and excel files...MAYBE it has to do with the Riverbed WANOP appliance but either way... don't you love how this thread just randomly died
with no solutions? :'( Thanks Micro$oft ;)
{Edit} Oh! And one last thing...this MIGHT help steer someone in the right direction in the future... there could be a problem related to your network filer such as a NetApp appliance, EMC, Netgear etc where there is an SMB version mis-match or a bug of some
kind requiring you to apply a patch your storage device in order to fix this type of issue.

Number formatted Amount field not working in Excel 2010

Hi,
We have BI reports in EBS 11.5.10.2 designed using word 2007 RTF templates. The output is selected to write to Excel so that they can calculate on amount fields. Recently we upgraded to Office 2010 and the amount filed which has number format when downloaded to Excel will not allow to use functions like Sum. If i deleted the table column and add the column back, then it works. Is anyone runing into similar issues....

Interesting to note this is still a problem, but even more interesting is as to why Excel works fine the first time you bring in the xsd, but not after you save it. I found information that says it's related to resolving externally referenced xsds,
which is fine, but again, why does it work the first ime and not the second? If it were a problem with external xsds then it should never work at all so I think that answer is bogus.
Something has to be getting corrupted on the save and it's not important enough to MS to spend the time to fix it.

Xml schema not working in excel 2010 - xml corrupt

I originally posted this thread in Microsoft Answers but was suggested to post here...
I upgraded from xl2003 to xl2010. I'm trying to map xml schemas to xl2010 (using the source pane just as I did for xl2003) and the mapping works fine until I save the file and reopen it. Once I reopen the file and try accessing the map through the XML source
pane, I get an error identifying the xml map is corrupt as follows:
"The operation cannot be completed because the XML map is corrupt
To fix this problem, remove the associated xml map from the workbook and then add the XML map back to the workbook.
/schecma/element[1][@name = 'returnData']/complextype[1]/complexContent[1]/extension[1]Undefined <complexType>, '{http://www.....' is used as a base type."
I've tried this in xl2007 and it works fine. I also read some blogs about xl2010 xml features and in some I found that this new version has enhanced security xml features.
Any help would be appreciated.
"innovation is the key to success"

Interesting to note this is still a problem, but even more interesting is as to why Excel works fine the first time you bring in the xsd, but not after you save it. I found information that says it's related to resolving externally referenced xsds,
which is fine, but again, why does it work the first ime and not the second? If it were a problem with external xsds then it should never work at all so I think that answer is bogus.
Something has to be getting corrupted on the save and it's not important enough to MS to spend the time to fix it.

Bi Publisher tab not appearing under Excel 2010

Hi,
We have a problem with my team when trying to use BI Publisher in Excel.
We use Microsoft Office 2010 under Windows 7 configuration.
It is working fine with Word : we use it often and the installation worked fine. The tab in Word appeared at first use. But when trying to use it with Excel, the tab is not appearing. We checked in the Add-ins options of Excel, we do not see any new add-in such as "TemplateBuilder.dot" that we see in word. There is also nothing in the "Disabled item" list.
Can please someone help us ?
Thanks a lot !

If you cannot show the BI Publisher Macros in Word :
1.     You have to uninstall the BI Publisher desktop
2.     Install the BI Publisher as (Right-click on the "Command Prompt" item and select "Run as administrator".)
3.     If you cannot show the BI Publisher macros and in word options show TBmenu as disable you have to do :
4.     Click the Microsoft Office Button , click Word Options, and then click Add-Ins.
5.     In the Add-ins box, identify the add-in that you want to enable and note the Add-in type located in the Type column.
6.     Select the Add-in type in the Manage box and then click Go
7.     Select the check box for the Add-in that you want enable and then click OK.
8.     Close the word
9.     Reopen the word , than appear the BI Publisher
Azita

Power Map Available for Excel 2010?

Hi,
I would like to download Power Map for Excel 2010. Does Microsoft have an add-in for Power Map for Excel 2010? I've been searching but have only come across an add-in for Excel 2013.
Thank you.
Stuart

Nope. It is for Excel 2013 only (Office 365).

Design top row of user entered information to repeat at top of each page

I am trying to design a form that will allow the top row (or top few
text fields) to repeat at the top of any additional pages that are generated as a result of flowed content.

Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!!

BEA-473013: Aggregation Server Not Available

Can anyone tell the reason for these messages that I observe (every 60 seconds) in the stdout logs?
<Dec 29, 2010 9:08:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
<Dec 29, 2010 9:09:00 AM CST> <Error> <ALSB Statistics Manager> <BEA-473013> <Aggregation Server Not Available>
The server is part a Weblogic 10.3.x cluster. Unfortunately, the documentation online does not provide a cause for this BEA error code - http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e14397/Statistics.html

May be this can help you
http://prabodh-mitra.blogspot.com/2011/02/aggregation-server-not-available.html

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

"Rows to Repeat at top" Not Available in Excel 2010

Similar Messages

Maybe you are looking for