Rpf-check failure

Hi!
What does the above statement mean?
I am trying to nat some traffic but the packet tracer shows that packets get dropped at the NAT rpf-check step.
/Lajja

Hello Lajja1234,
It means that on the way back ( the returning traffic) there is no valid NAT for that traffic,
You can post the traffic that you want to allow and the packet tracer, I will then provide you what you need
Regards

Similar Messages

Yoga 2 Kernel Security Check Failure

I have this Yoga 2 13' for almost two months. A few days after my purchase, the computer suddenly gave a blue screen and restarted. Then this BSODs became more frequent. The strange thing is that, I was in France for almost a month, and no BSODs happened. Now that I am in Turkey for a few days, the PC started to give out kernel security check failures.
Any suggestions for the resolution of the problem. Cause it's quite annoying to wait for the PC to crush before doing anything?
Here are the details for dump files:
computer name: BAHADIR
windows version: Windows 8.1 , 6.2, build: 9200
windows dir: C:\windows
Hardware: 20344, LENOVO, INVALID
CPU: GenuineIntel Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4212088832 total
Crash Dump Analysis
Crash dump directory: C:\windows\Minidump
Crash dumps are enabled on your computer.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-13828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\memory.dmp
This was probably caused by the following module: netwbw02.sys (Netwbw02+0xD945)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\drivers\netwbw02.sys
product: Intel® Wireless WiFi Link Adapter
company: Intel Corporation
description: Intel® Wireless WiFi Link Driver
Bug check description: The kernel has detected the corruption of a critical data structure.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: netwbw02.sys (Intel® Wireless WiFi Link Driver, Intel Corporation).
Google query: Intel Corporation KERNEL_SECURITY_CHECK_FAILURE
On Mon 8.12.2014 11:25:34 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-20953-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001829955E0, 0xFFFFD00182995538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 10:22:55 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-7203-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00174FC5180, 0xFFFFD00174FC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 09:48:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000C3F70180, 0xFFFFD000C3F700D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 08:26:09 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12703-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000210D55E0, 0xFFFFD000210D5538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 19:57:40 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-13812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00025F335E0, 0xFFFFD00025F33538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 17:03:33 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-21828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001CA954180, 0xFFFFD001CA9540D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 16:58:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-17812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0002BFC5180, 0xFFFFD0002BFC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 14:38:37 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-14515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00023BD05E0, 0xFFFFD00023BD0538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

I have this Yoga 2 13' for almost two months. A few days after my purchase, the computer suddenly gave a blue screen and restarted. Then this BSODs became more frequent. The strange thing is that, I was in France for almost a month, and no BSODs happened. Now that I am in Turkey for a few days, the PC started to give out kernel security check failures.
Any suggestions for the resolution of the problem. Cause it's quite annoying to wait for the PC to crush before doing anything?
Here are the details for dump files:
computer name: BAHADIR
windows version: Windows 8.1 , 6.2, build: 9200
windows dir: C:\windows
Hardware: 20344, LENOVO, INVALID
CPU: GenuineIntel Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4212088832 total
Crash Dump Analysis
Crash dump directory: C:\windows\Minidump
Crash dumps are enabled on your computer.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-13828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\memory.dmp
This was probably caused by the following module: netwbw02.sys (Netwbw02+0xD945)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\drivers\netwbw02.sys
product: Intel® Wireless WiFi Link Adapter
company: Intel Corporation
description: Intel® Wireless WiFi Link Driver
Bug check description: The kernel has detected the corruption of a critical data structure.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: netwbw02.sys (Intel® Wireless WiFi Link Driver, Intel Corporation).
Google query: Intel Corporation KERNEL_SECURITY_CHECK_FAILURE
On Mon 8.12.2014 11:25:34 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-20953-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001829955E0, 0xFFFFD00182995538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 10:22:55 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-7203-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00174FC5180, 0xFFFFD00174FC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 09:48:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000C3F70180, 0xFFFFD000C3F700D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 08:26:09 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12703-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000210D55E0, 0xFFFFD000210D5538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 19:57:40 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-13812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00025F335E0, 0xFFFFD00025F33538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 17:03:33 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-21828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001CA954180, 0xFFFFD001CA9540D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 16:58:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-17812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0002BFC5180, 0xFFFFD0002BFC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 14:38:37 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-14515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00023BD05E0, 0xFFFFD00023BD0538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

ASA rpf-check DROP, ASA checking NAT in the incorrect interface

Hi
My current architecture is :
Internet <--> FW <--> ASA <--> LAN
FW <--> ASA
we have two links between ASA and the FW, the corresponding ASA interfaces are "outside" and "vpn"
the "outside" interface is used for browsing Internet, also for making some services accessible to our partners by doing NAT to our servers
the "vpn" interface is used to grant access to our LANs from remote Offices
let say that firewall rules are OK and the remote offices have access to the whole LAN by port 80
below the current configuration :
interface GigabitEthernet0/0
nameif inside
security-level 100
ip address 192.168.1.2 255.255.255.0
interface GigabitEthernet0/1
nameif outside
security-level 0
ip address 192.168.11.2 255.255.255.0
interface GigabitEthernet0/2
nameif vpn
security-level 0
ip address 192.168.12.2 255.255.255.0
object-group network Inside_LANs
network-object 192.168.3.0 255.255.255.0
network-object 192.168.4.0 255.255.255.0
network-object 192.168.5.0 255.255.255.0
access-list Inside-to-outside extended permit icmp object-group Inside_LANs any echo
access-list Inside-to-outside extended permit udp any host TimeServer eq ntp
access-list Inside-to-outside extended permit ip object-group Inside_LANs any
global (outside) 1 interface
global (outside) 2 192.168.11.60 netmask 255.255.255.255
nat (inside) 1 access-list Inside-to-outside
nat (inside) 2 192.168.6.0 255.255.255.0
static (inside,outside) 192.168.11.10 192.168.2.10 netmask 255.255.255.255
static (inside,outside) 192.168.11.11 192.168.2.11 netmask 255.255.255.255
static (inside,outside) 192.168.11.12 192.168.2.12 netmask 255.255.255.255
route inside 192.168.2.0 255.255.255.0 192.168.1.1 1
route inside 192.168.3.0 255.255.255.0 192.168.1.1 1
route inside 192.168.4.0 255.255.255.0 192.168.1.1 1
route inside 192.168.5.0 255.255.255.0 192.168.1.1 1
route inside 192.168.6.0 255.255.255.0 192.168.1.1 1
route vpn 192.168.20.0 255.255.255.0 192.168.12.1 1
our problem is that packets are dropped from remote office to LAN, we are getting the rpf-check drop in packet tracer
example 1 (to a server without NAT 192.168.2.13) ---> connection OK (not dropped)
remote office 192.168.20.55 to 192.168.2.13
Phase: 5
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
nat (inside) 1 access-list Inside-to-outside
match udp inside any inside host TimeServer eq 123
dynamic translation to pool 1 (No matching global)
translate_hits = 0, untranslate_hits = 0
Additional Information:
example 2 (to a server with static NAT 192.168.2.10) ---> connection OK (not dropped)
remote office 192.168.20.55 to 192.168.2.10
Phase: 6
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (inside,outside) 192.168.11.10 192.168.2.10 netmask 255.255.255.255
match ip inside host 192.168.2.10 outside any
static translation to 192.168.11.10
translate_hits = 76643, untranslate_hits = 188597
Additional Information:
example 3 (to a host with dynamic ACL NAT 192.168.4.40) ---> connection NOK (dropped)
remote office 192.168.20.55 to 192.168.4.40
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:
nat (inside) 1 access-list Inside-to-outside
match ip inside 192.168.4.0 255.255.255.0 vpn any
dynamic translation to pool 1 (No matching global)
translate_hits = 1, untranslate_hits = 0
Additional Information:
example 4 (to a host with dynamic Network NAT 192.168.6.30) ---> connection NOK (dropped)
remote office 192.168.20.55 to 192.168.6.30
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:
nat (inside) 2 192.168.6.0 255.255.255.0
match ip inside 192.168.6.0 255.255.255.0 vpn any
dynamic translation to pool 2 (No matching global)
translate_hits = 117, untranslate_hits = 0
Additional Information:
our questions :
1) why ASA don't check the reverse path route before checking the NAT ?
if it does, the route back to the office is set to the "vpn" interface (route vpn 192.168.20.0 255.255.255.0 192.168.12.1 1), so ASA don't have to check NAT in other interface, currently it's checking the NAT in the "outside" interface even if it's not the route back to the office
2) why it's working for static NAT servers and Not working for the dynamic NAT ones ?
when ASA check a server with static NAT it find a match in the outside interface but even so it discard it and the connection Work. (example 2)
when ASA check a server/host with dynamic NAT (ACL or Network) if find a match in the outside interface but drop the connection
3) we know that this behavior can be solved by adding a NAT exception for the dynamic NAT in the "outside" interface (nat (inside) 0 access-list Inside-NAT-Exceptions) but :
why ASA checking the global NAT even if it's not the correct interface ?
Why it's working for static NAT and not working for the dynamic one ?
Thanks a lot

Hi,
It would be easier to troubleshoot if you shared the complete "packet-tracer" command you used and the full output of the command.
But to me the situation in its current form looks the following.
Example 1
To me it seems this is working as it should. Connection is coming from "vpn" to "inside". There is no "static" configurations between "vpn" and "inside" and there is no "nat" command for "vpn" interface so the traffic should pass normally without any NAT related conflicts/problems as the traffic does not match any NAT configuration.
Notice that the ASA might show some unrelated NAT information in the output of the "packet-tracer" command (commands related to other interfaces). In those NAT Phase sections there is a section saying "Additional Information:" If there is no text after this text that means that this NAT has not been applied. I am not sure why the ASA lists some NAT configurations in the output that are not related. I have seen this in many occasions and do not know the reason and I have not really put any time/effort into understanding why it shows the unrelated information in the output.
Example 2
This seems to be working as expected also.
According to the configuration provided there is no existing NAT configurations related to either the source or destination IP address on the ASA between "vpn" and "inside" interface so the traffic passes through the ASA without facing any conflicts with NAT configurations.
Again, the "packet-tracer" shows NAT information unrelated to this situation. And again the "Additional Information:" section lists no additional information so the NAT listed is not applied.
Example 3 and 4
These tests fail as expected since there is a Dynamic Policy PAT configuration for both internal destination hosts that the remote users are trying to connect to. The problem comes from the fact that the initial direction from remote to internal does not match any NAT configuration and the reverse direction from internal to remote matches the Dynamic Policy PAT and therefore the connection attempt is dropped. The connection must match the same NAT configuration on both directions.
In this situation you would either have to configure NAT0, Static NAT , Static PAT or Static Policy NAT/PAT which all would prevent the connection from matching to the Dynamic Policy PAT (But would match the mentioned type of NAT in both directions as they have higher priority than Dynamic Policy PAT). Typically the prefererred solution would be to use NAT0 though you naturally have the option to use a NAT address if there is any overlap.
Hope this helps :)
- Jouni

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

Credit Check Failure not working as expected -- 11.5.10.2

Hi,
We have setup Credit Check calculation at Sales Order Header level.
This is working as expected when the Sales order is Booked, Credit Check Failure hold is applied when its eligible.
But if one the of lines belonging to a separate Ship set of Sales order is Shipped and Closed and other line is open.
Any changes on the Lines that are Open is not placing the hold in the Sales Order.
We need Credit Check Validation to happen any changes in the Price or Quantity of any SO line even if other lines are Shipped/Closed and the hold needs to be placed at Sales Order header.
Any suggestions to change the setup or any other workaround on this would be appreciated?
Thanks,
Praveen

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Kernel Check Failure

I got Kernel Security check Failure and my system rebooted or failed to restart.
This is the Error Log.
Could you please help me sort out this error?
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 4/24/2015 7:48:45 PM
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: MCR
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2015-04-24T16:48:45.255874600Z" />
<EventRecordID>2467</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>MCR</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">313</Data>
<Data Name="BugcheckParameter1">0x3</Data>
<Data Name="BugcheckParameter2">0xffffd000469d03b0</Data>
<Data Name="BugcheckParameter3">0xffffd000469d0308</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>

Hi:
Well few things I have to offer:
Test you hardware for failures - extensive system test
It'll take time to complete. If everything passes -
Run this program , check with the final report for the culprit causing crash.
Related read: BSOD
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Kernell security check failure issue

Hi.
I installed a webcam with mic integrated (external device) to my lenovo T61 computer, running 8.1 windows. When trying to use the webcam, the kernel security check failure appears, crashes my computer and restarts it. What can I do?
Thanks

Hi,
Any update here?
For the error message about KERNEL_SECURITY_CHECK_FAILURE, here is an MSDN article for reference:
Bug Check 0x139 KERNEL_SECURITY_CHECK_FAILURE
This bug check indicates that the kernel has detected the corruption of a critical data structure.
For information about how to recover from this error, see
Resolving Blue Screen errors in Windows.
As ZigZag and Brandon Records mentioned, we need the dump file to offer a better suggestion.
Some more reference:
Use OneDrive (SkyDrive) to
upload collected files and post screen shot/picture. (Updated: 1/16/2012)
How to read the small memory dump file that is created by Windows if a crash occurs
Best regards
Michael Shao
TechNet Community Support

BSOD - Kernel Security Check Failure

Hello,
So, I built this gaming rig around September, so this computer is still fairly new. Everything was fine until about a few weeks ago I started having BSOD -- all of them were kernel_security_check_failure. I've already done sfc /scannow on command prompt and
it shows that nothing was corrupted. Generally, the BSOD only happens when I download anything. For example, after maybe, 20 or so my computer crashes. The time does vary, but in the end, it still crashes.
My specs if needed:
AMD FX-6300
2 x 4GB 240-PIN DDR3 RAM
Radeon R9 270x 2GB 256-bit GDDR5
GA-970A-UD3P AM3+ AMD 970
My minidump file shows this:
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\021315-16703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17630.amd64fre.winblue_r7.150109-2022
Machine Name:
Kernel base = 0xfffff802`b8285000 PsLoadedModuleList = 0xfffff802`b855e250
Debug session time: Fri Feb 13 21:42:38.503 2015 (UTC - 5:00)
System Uptime: 0 days 0:15:45.226
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd000fb1fee30, ffffd000fb1fed88, 0}
*** WARNING: Unable to verify timestamp for MRVW24C.sys
*** ERROR: Module load completed but symbols could not be loaded for MRVW24C.sys
Probably caused by : MRVW24C.sys ( MRVW24C+272f1 )
Followup: MachineOwner
4: kd> !analyze -v
* Bugcheck Analysis *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000fb1fee30, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000fb1fed88, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd000fb1fee30 -- (.trap 0xffffd000fb1fee30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe001946f40d0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe001946f3fb8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff802b83768f9 rsp=ffffd000fb1fefc0 rbp=0000000000000000
r8=ffffe001946f41e8 r9=ffffe001946f3fb8 r10=ffffe001947e49c0
r11=ffffd000fb1ff050 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di ng nz ac po cy
nt!ExInterlockedInsertTailList+0xad:
fffff802`b83768f9 cd29 int 29h
Resetting default scope
EXCEPTION_RECORD: ffffd000fb1fed88 -- (.exr 0xffffd000fb1fed88)
ExceptionAddress: fffff802b83768f9 (nt!ExInterlockedInsertTailList+0x00000000000000ad)
ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: 0000000000000003
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff802b83e14e9 to fffff802b83d59a0
STACK_TEXT:
ffffd000`fb1feb08 fffff802`b83e14e9 : 00000000`00000139 00000000`00000003 ffffd000`fb1fee30 ffffd000`fb1fed88 : nt!KeBugCheckEx
ffffd000`fb1feb10 fffff802`b83e1810 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffd000`fb1fec50 fffff802`b83e0a34 : ffffd000`fb1fefa0 fffff802`b8537200 00000000`00000000 fffff800`b281cf1f : nt!KiFastFailDispatch+0xd0
ffffd000`fb1fee30 fffff802`b83768f9 : ffffe001`93318400 00000000`00000001 ffffe001`96889c40 fffff800`b2aaf887 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`fb1fefc0 fffff800`b50a52f1 : ffffe001`946f3000 ffffe001`969dcd10 00000000`00000000 ffffe001`9458dad0 : nt!ExInterlockedInsertTailList+0xad
ffffd000`fb1ff000 ffffe001`946f3000 : ffffe001`969dcd10 00000000`00000000 ffffe001`9458dad0 00000000`00000000 : MRVW24C+0x272f1
ffffd000`fb1ff008 ffffe001`969dcd10 : 00000000`00000000 ffffe001`9458dad0 00000000`00000000 fffff800`b50aa38e : 0xffffe001`946f3000
ffffd000`fb1ff010 00000000`00000000 : ffffe001`9458dad0 00000000`00000000 fffff800`b50aa38e ffffe001`96889c40 : 0xffffe001`969dcd10
STACK_COMMAND: kb
FOLLOWUP_IP:
MRVW24C+272f1
fffff800`b50a52f1 ?? ???
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: MRVW24C+272f1
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: MRVW24C
IMAGE_NAME: MRVW24C.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 472551f7
FAILURE_BUCKET_ID: 0x139_3_MRVW24C+272f1
BUCKET_ID: 0x139_3_MRVW24C+272f1
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_mrvw24c+272f1
FAILURE_ID_HASH: {405011a6-34ec-30a6-31a9-53275dcd66c7}
Followup: MachineOwner

Hello,
So, I built this gaming rig around September, so this computer is still fairly new. Everything was fine until about a few weeks ago I started having BSOD -- all of them were kernel_security_check_failure. I've already done sfc /scannow on command prompt and
it shows that nothing was corrupted. Generally, the BSOD only happens when I download anything. For example, after maybe, 20 or so my computer crashes. The time does vary, but in the end, it still crashes.
My specs if needed:
AMD FX-6300
2 x 4GB 240-PIN DDR3 RAM
Radeon R9 270x 2GB 256-bit GDDR5
GA-970A-UD3P AM3+ AMD 970
My minidump file shows this:
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\021315-16703-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17630.amd64fre.winblue_r7.150109-2022
Machine Name:
Kernel base = 0xfffff802`b8285000 PsLoadedModuleList = 0xfffff802`b855e250
Debug session time: Fri Feb 13 21:42:38.503 2015 (UTC - 5:00)
System Uptime: 0 days 0:15:45.226
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd000fb1fee30, ffffd000fb1fed88, 0}
*** WARNING: Unable to verify timestamp for MRVW24C.sys
*** ERROR: Module load completed but symbols could not be loaded for MRVW24C.sys
Probably caused by : MRVW24C.sys ( MRVW24C+272f1 )
Followup: MachineOwner
4: kd> !analyze -v
* Bugcheck Analysis *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000fb1fee30, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000fb1fed88, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd000fb1fee30 -- (.trap 0xffffd000fb1fee30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe001946f40d0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe001946f3fb8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff802b83768f9 rsp=ffffd000fb1fefc0 rbp=0000000000000000
r8=ffffe001946f41e8 r9=ffffe001946f3fb8 r10=ffffe001947e49c0
r11=ffffd000fb1ff050 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di ng nz ac po cy
nt!ExInterlockedInsertTailList+0xad:
fffff802`b83768f9 cd29 int 29h
Resetting default scope
EXCEPTION_RECORD: ffffd000fb1fed88 -- (.exr 0xffffd000fb1fed88)
ExceptionAddress: fffff802b83768f9 (nt!ExInterlockedInsertTailList+0x00000000000000ad)
ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: 0000000000000003
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff802b83e14e9 to fffff802b83d59a0
STACK_TEXT:
ffffd000`fb1feb08 fffff802`b83e14e9 : 00000000`00000139 00000000`00000003 ffffd000`fb1fee30 ffffd000`fb1fed88 : nt!KeBugCheckEx
ffffd000`fb1feb10 fffff802`b83e1810 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffd000`fb1fec50 fffff802`b83e0a34 : ffffd000`fb1fefa0 fffff802`b8537200 00000000`00000000 fffff800`b281cf1f : nt!KiFastFailDispatch+0xd0
ffffd000`fb1fee30 fffff802`b83768f9 : ffffe001`93318400 00000000`00000001 ffffe001`96889c40 fffff800`b2aaf887 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`fb1fefc0 fffff800`b50a52f1 : ffffe001`946f3000 ffffe001`969dcd10 00000000`00000000 ffffe001`9458dad0 : nt!ExInterlockedInsertTailList+0xad
ffffd000`fb1ff000 ffffe001`946f3000 : ffffe001`969dcd10 00000000`00000000 ffffe001`9458dad0 00000000`00000000 : MRVW24C+0x272f1
ffffd000`fb1ff008 ffffe001`969dcd10 : 00000000`00000000 ffffe001`9458dad0 00000000`00000000 fffff800`b50aa38e : 0xffffe001`946f3000
ffffd000`fb1ff010 00000000`00000000 : ffffe001`9458dad0 00000000`00000000 fffff800`b50aa38e ffffe001`96889c40 : 0xffffe001`969dcd10
STACK_COMMAND: kb
FOLLOWUP_IP:
MRVW24C+272f1
fffff800`b50a52f1 ?? ???
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: MRVW24C+272f1
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: MRVW24C
IMAGE_NAME: MRVW24C.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 472551f7
FAILURE_BUCKET_ID: 0x139_3_MRVW24C+272f1
BUCKET_ID: 0x139_3_MRVW24C+272f1
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_mrvw24c+272f1
FAILURE_ID_HASH: {405011a6-34ec-30a6-31a9-53275dcd66c7}
Followup: MachineOwner

NetIOPermission.check failure accessing Forms

I am running Developer Server 6.0 on a Solaris 7 machine with
a 8.0.5 Oracle.
I have installed all the Developer patches for Solaris and have
done all the unzipping of classes.zip in the forms60/java
directory as mentioned in the previous threads.
I am running IE 5.0 from a Windows 98 machine attempting to read
a demo fmx file. I get the splash screen and then I get a failure
on check caused by
oracle/forms/handler/FormCanvas.doAddImageEntry. I suspect this
is some IE 5.0 configuration issue instead of a Developer Server
problem.
Using Netscape 4.61, I get the AppletViewer error with no splash
screen.
Has anyone seen the NetIOPermission.check failure problem, and
what is the fix?
Rajeev
null

You can POST them to the database.
If they don't exist, there is no problem and you can commit else you do a rollback by using CLEAR_FORM

Credit check failure notification (11i)

Hi All,
I know there is notification send to the person who creates the SO whenever the SO goes on hold .
But our requirement is the notification should be sent to some other person who is actually authorized to release the hold.
We want to understand if there is a setup through which we can receive this credit check failure notification.
Regards
Gagan

Hi Gagan
As i know, there is no standard setup for notification like that. I think you can utilize Oracle Alert to do so but it need technical skill on it.
Rattina.

Offline Subordinate CA won't start due to revocation check failure

Greetings!
I'm building out a 3-tier PKI in my lab where both the root & first-level subordinate CA are offline. I am at the point where I have installed the CA certificate on the offline subordinate & I am attempting to start Certificate Services. THe
service start fails due to revocation check failure. This makes sense to me since the 2 locations in the CDP are ldap & http respectively; both requiring network connectivity.
What is the best practice for getting this to work? Is there a way to locally "inject" the Roo CA's CRL, or am I missing something else?

you need to install root CRL to a local certificate store:
certutil -addstore CA c:\filename.crl
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

ERR_XPCHECK: param check failure/request DATA_VOLUME_SIZE_0001 Contraint

Hi,
When installing ECC 5.0 IDES on Wins 2k3 x64 & MaxDB 7.5. At phase Database Instance Installation - sub-phase MaxDB Database Installation, I get error as following:
CJS-00030 Assertion failed: in
function InstallationScript_334() {
    var installer = new Installer();
    var kdb = new KeyDB();
    var context = new Context();
    var gui = new Gui();
Checking sapinst_dev.log:
SDB: ERROR EXECUTING PARAM CHECK! CHECK THE XCMDOUT.LOG!
Checking XCMDOUT.LOG:
> Subprocess starts at 20100521112002
Execute Command : d:\sapdb\programs\pgm\dbmcli.exe -n Bitexco -d GCS -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : exit
> Subprocess stops at 20100521112003
OK
ERR
-24973,ERR_XPCHECK: param check failure/request
DATA_VOLUME_SIZE_0001     Constraint
20480000
It seems that data volume is too big, but I don't know how to change it.
Regards,
Toan Do

Hi,
Here's outputs:
dbmcli.exe on Bitexco : GCS>param_getvolsall
OK
LOG_MIRRORED                     NO
MAXLOGVOLUMES                    1
MAXDATAVOLUMES                   1
LOG_VOLUME_NAME_001              128000     F D:\sapdb\GCS\saplog\DISKL001
DATA_VOLUME_NAME_0001            20480000   F D:\sapdb\GCS\sapdata\DISKD0001
dbmcli.exe on Bitexco : GCS>param_directget VOLUMENO_BIT_COUNT
OK
VOLUMENO_BIT_COUNT      8
dbmcli.exe on Bitexco : GCS>param_getexplain VOLUMENO_BIT_COUNT
OK
Number of bits in a four byte converter block address
reserved for the logical devive number which identifies
the data volumes. The rest of the four byte block
address is used for the device offset.
The greater the VOLUMENO_BIT_COUNT the more data volume
could be managed.
Note that this reduces the capacity of usable data volumes!
This value is not changeable within the lifetime of the data
base without making a recovery.
Example: If the PAGESIZE is set to 8 KB and VOLUMENO_BIT_COUNT
          is set to the default value of 8 than the data base is able
          to manage as far as 256 data volumes, whereby the maximum
          capacity of one data volume is 128 GB.
          If the VOLUMENO_BIT_COUNT is set to 6 the data base is able
          to manage up to 64 data volumes, whereby the capacity of
          one data volume is 512 GB.
The lower and upper limits are:
     6 <= VOLUMENO_BIT_COUNT <= 12
dbmcli.exe on Bitexco : GCS>param_directput DATA_VOLUME_SIZE_0001 16000000
OK
dbmcli.exe on Bitexco : GCS>param_checkall
OK
Regards,

Kernel Security Check Failure

I have bluescreened 3 times today right after my keyboard spams the space key a bunch, please help.
Here's my dmp file:
<iframe frameborder="0" height="120" scrolling="no" src="https://onedrive.live.com/embed?cid=CBF6025D16668520&resid=CBF6025D16668520%218492&authkey=ANdlfa77CbHiTno" width="98"></iframe>

Achillesactually
This was Related to your 5 year old Abyssus.sys USB Optical Mouse Drive from Razer (Asia-Pacific) Pte Ltd. Updating to current should fix the issue
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\082314-29734-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`97287000 PsLoadedModuleList = 0xfffff802`975512d0
Debug session time: Sat Aug 23 17:01:44.702 2014 (UTC - 4:00)
System Uptime: 3 days 1:02:09.481
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002a72c480, ffffd0002a72c3d8, 0}
*** WARNING: Unable to verify timestamp for Abyssus.sys
*** ERROR: Module load completed but symbols could not be loaded for Abyssus.sys
Probably caused by : Abyssus.sys ( Abyssus+1b8b )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002a72c480, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002a72c3d8, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002a72c480 -- (.trap 0xffffd0002a72c480)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe001b6d6f9e8 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe001b4edf1b8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80297386b7e rsp=ffffd0002a72c610 rbp=0000000000000000
r8=ffffe001b5c31f98 r9=00000000000007ff r10=fffff8029756f2c0
r11=ffffc000fc773cb0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz na pe cy
nt!ExInterlockedInsertHeadList+0xae:
fffff802`97386b7e cd29 int 29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002a72c3d8 -- (.exr 0xffffd0002a72c3d8)
ExceptionAddress: fffff80297386b7e (nt!ExInterlockedInsertHeadList+0x00000000000000ae)
ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: 0000000000000003
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff802973e6ae9 to fffff802973dafa0
STACK_TEXT:
ffffd000`2a72c158 fffff802`973e6ae9 : 00000000`00000139 00000000`00000003 ffffd000`2a72c480 ffffd000`2a72c3d8 : nt!KeBugCheckEx
ffffd000`2a72c160 fffff802`973e6e10 : 00000000`06e4f949 00000001`00000000 00000003`00000000 00000000`00000003 : nt!KiBugCheckDispatch+0x69
ffffd000`2a72c2a0 fffff802`973e6034 : 00000000`00000de8 00000000`00000000 00000000`00000000 00000000`00000080 : nt!KiFastFailDispatch+0xd0
ffffd000`2a72c480 fffff802`97386b7e : 00000000`00000000 00000000`00000000 00000000`00000000 ffffe001`b88ea060 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2a72c610 fffff800`89d18b8b : ffffe001`b4edf190 00000000`00000002 ffffe001`b5c31f80 ffffe001`b88ea060 : nt!ExInterlockedInsertHeadList+0xae
ffffd000`2a72c650 ffffe001`b4edf190 : 00000000`00000002 ffffe001`b5c31f80 ffffe001`b88ea060 ffffd000`00000000 : Abyssus+0x1b8b
ffffd000`2a72c658 00000000`00000002 : ffffe001`b5c31f80 ffffe001`b88ea060 ffffd000`00000000 00000000`00000000 : 0xffffe001`b4edf190
ffffd000`2a72c660 ffffe001`b5c31f80 : ffffe001`b88ea060 ffffd000`00000000 00000000`00000000 ffffd000`2a72c6c0 : 0x2
ffffd000`2a72c668 ffffe001`b88ea060 : ffffd000`00000000 00000000`00000000 ffffd000`2a72c6c0 00000000`00000000 : 0xffffe001`b5c31f80
ffffd000`2a72c670 ffffd000`00000000 : 00000000`00000000 ffffd000`2a72c6c0 00000000`00000000 00000000`00a0009e : 0xffffe001`b88ea060
ffffd000`2a72c678 00000000`00000000 : ffffd000`2a72c6c0 00000000`00000000 00000000`00a0009e ffffc001`11369c00 : 0xffffd000`00000000
STACK_COMMAND: kb
FOLLOWUP_IP:
Abyssus+1b8b
fffff800`89d18b8b ?? ???
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: Abyssus+1b8b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Abyssus
IMAGE_NAME: Abyssus.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4aea553c
FAILURE_BUCKET_ID: 0x139_3_Abyssus+1b8b
BUCKET_ID: 0x139_3_Abyssus+1b8b
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_abyssus+1b8b
FAILURE_ID_HASH: {f3c79fe2-a5d8-d3c9-4b46-6780a46e70d6}
Followup: MachineOwner
0: kd> lmvm Abyssus
start end module name
fffff800`89d17000 fffff800`89d19a80 Abyssus T (no symbols)
Loaded symbol image file: Abyssus.sys
Image path: \SystemRoot\system32\drivers\Abyssus.sys
Image name: Abyssus.sys
Timestamp: Thu Oct 29 22:53:48 2009 (4AEA553C)
CheckSum: 00012A7D
ImageSize: 00002A80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Wanikiya and Dyami--Team Zigzag

Run-Time Check Failure #2 - Stack around the variable was corrupted.

I had checked on net as well as on social msdn site for this kind of error. Usually error is due to writing out of index. I tried to figure out same mistake in below mentioned code but I failed to do so. I am using Visual Studio 2010 for compilation
on Windows 7 (64 bit) machine. I am getting following error "Run-Time Check Failure #2 - Stack around the variable 'lcPacketPrefix' was corrupted."
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define TRUE 1
#define FALSE 0
#define BYTE unsigned char
typedef struct {
int i;
double e;
long t;
char ar[45];
}Sample;
bool getMCXBuffPrefix(char * lpSource,char* Destination, int piSourceLen)
char lcPacketLen[10];
char lcPacketPrefix[5];
try
memset(lcPacketLen,'0',sizeof(lcPacketLen));
memset(lcPacketPrefix,'0',sizeof(lcPacketPrefix));
_itoa(piSourceLen,lcPacketLen,10);
strcpy_s(lcPacketPrefix+(sizeof(lcPacketPrefix)-strlen(lcPacketLen)),sizeof(lcPacketPrefix),lcPacketLen);
//To Prefix Length in send Packet
memcpy(Destination,lcPacketPrefix,5);
memcpy(Destination+5,(char*)lpSource,piSourceLen);
catch(...)
printf("In Catch: While Prefixing MCX Buffer.\n");
return FALSE;
return TRUE;
int main(int argc, char *argv[])
BYTE* lcCompData = (BYTE*) malloc (1024);
BYTE* gpcSendSource = (BYTE*) malloc (1024);
Sample sample_t;
memset((BYTE*)gpcSendSource,'0',1024);
memset(&sample_t, '\0', sizeof(Sample));
memcpy(gpcSendSource, &sample_t, sizeof(Sample));
bool lbPrefixed = getMCXBuffPrefix((char*)gpcSendSource,(char*)lcCompData,sizeof(Sample));
return 0;
Little guidance will be helpful.

I had checked on net as well as on social msdn site for this kind of error. Usually error is due to writing out of index.
As it is in your code.
strcpy_s(lcPacketPrefix+(sizeof(lcPacketPrefix)-strlen(lcPacketLen)),sizeof(lcPacketPrefix),lcPacketLen);
You're saying that the size of the buffer is greater than it is
because you're offsetting the start pointer.
If you'd more correctly written the code like this:
size_t offset = (sizeof(lcPacketPrefix) - strlen(lcPacketLen));
strcpy_s(lcPacketPrefix+offset,sizeof(lcPacketPrefix)-offset,lcPacketLen);
You'd have got a run-time error in the debug version of your code.
However that's not what you want. Try something like this instead:
size_t offset = (sizeof(lcPacketPrefix) - strlen(lcPacketLen));
strncpy(lcPacketPrefix + offset, lcPacketLen, strlen(lcPacketLen) );
But most importantly, understand what you'd done wrong and learn from
it.
Dave

R12.1.3 receivables - Credit Check Failure Issue

Hello,
We have few customers who have Credit Limit setup at customer level. These customers do not have credit limit set up at site levels. Or, in other words, the site level profile does not exist.
For e.g. a customer has following credit limits.
Customer Credit Limit: $7500.00
Order Credit Limit: $7500.00
Note that both types of credit limit has the same amount.
Now the problem is this: when entering and booking a Sales Order in Order Management, It does not apply any Credit Check Failure hold. Even if the Order amount for just one sales order exceeds $7500, it does NOT apply any credit check failure hold.
Same is the problem with Customer Credit limit. If there are 5 sales orders for a given customer and their grand total is exceeding $7500.00 it does NOT apply any credit check failure hold.
Has any one encountered this issue? What is causing this? What am I missing? Please advise.
Darsh

Hi Darsh,
Hope you have done the following...
1) On the Profile: Transaction Tab, ensure the credit check box is checked
2) On the payment terms aswell, ensure the credit check box is checked
3) if you are using any multi currency..make sure the currency is specified at customer profile with amount limits..
Thanks
-Arif.

Rpf-check failure

Similar Messages

Maybe you are looking for