RPM and Angle with PIX 6221
I am working on student project where we are controlling position of dc motor shaft. On the rotor of the motor there is optical encoder which is connected to PIX counter. But for best results of control we must measure speed and angle in same time. In attachment is the vi which we used. In the vi angle measurement is solved with DAQmx, but speed measurement is obtained with taking difference of angle in certain time. This type of speed measurement is sensitive to speed of loop and suffers from overflow of registers. Precise speed measurement is needed because of controlling dynamics of dc motor.
So is it possible to measure speed/frequency and angle from same CTR in DAQmx?
Sorry if solution is obvious, but we are new to LV.
Attachments:
RPM_ANGLE_DC.vi 30 KB
Hi weky,
actually it is possible if you use an absolute encoder. Please read this both links and tell us if it is helpful.
This link is basic information to use Encoders
http://www.ni.com/white-paper/7109/en/
This one can be helpful for you. There explains how to use absolute encoders
http://www.ni.com/white-paper/14964/en/
Regards!
Similar Messages
-
I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting
I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps -
Message MOPZ_CHECK107 with RPM and cProjects
Hi all,
I'm using SAP Solution Manager 7.0 EHP1 SPS26. I want to upgrade our ERP EHP3 system to EHP5. I'm running a MOPZ session and I get following errors:
Successor installed for SAP XRPM 4.0.
Successor installed for SAP CPROJECT SUITE 4.00
In fact SAP cProject Suite 4.50 is installed here.
I already saw a similar problem in this forum (Error in maintenance optimizer), but it doesn't help me. I tried to apply recommendations of SAP note 1495419, without success.
Our ERP EHP3 system is currently defined in SMSY like this:
- SAP ERP 6.0, with SAP ECC Server marked as relevant and SAP cProject Suite marked as also installed;
- EHP3 FOR SAP ERP 6.0, with Central Applications marked as relevant;
- SAP CPROJECT SUITE 4.50, with cProject Suite with WFM Core marked as relevant;
- SAP RPM 4.5, with RPM Core marked as relevant.
Logical component Z_ERP (ERP 6.0) is in our solution.
I also tried to use the Landscape Verification Tool (transaction LVSM), then ran a new MOPZ, but without success.
Any suggestion is welcome.
Kind regards,
ChristopheHi,
for the error - Successor installed for SAP CPROJECT SUITE 4.00
try this solution:
- Remove first SAP RPM, SAP CProjects Suite 4.50 and SAP Portf and Proj Mang 5.0 from the system.
- Now, add only CProjects Suite 4.50 and while adding, say "NO" when this window with respect to Product Assignment appears. Save the system.
- Now, add SAP Portf and Proj Mang 5.0 and save the system.
Run a new MOPZ transaction and it should work.
Regards,
Mohan. -
CProjects And RPM 5.0 with NWBC
Hi,
Why is FPM used as the framwork with NWBC for cProjects And RPM 5.0. Can any other frameworks be used for cPro and RPM 5.0 with NWBC? What is the technical feasibility of using FPM with NWBC??
Thanks And Regards,
Anu ShrinidhiHi,
several answers to your inquiry:
You can use SAP Portfolio and Project Management 5.0 with
- NWBC for HTML
- NWBC for Desktop
- SAP Enterprise Portal.
SAP Portfolio and Project Management 5.0 uses FPM (FloorPlan Manager), that's right, but this is not depending on NWBC (nor vice versa).
The UI guidelines valid for SAP Portfolio and Project Management 5.0 are the same as for the current release of the whole SAP Buisness Suite, FPM usage is one part of this guideline.
It is not possible to use SAP Portfolio and Project Management 5.0 without FPM (at least not without big modifications).
"SAP Portfolio and Project Management 5.0" is the successor of "cProjects 4.5" and "SAP RPM 4.5". This is the official name. There is no product or application called "cProjects 5.0" or "SAP RPM 5.0".
For features, functions, concepts, etc. of FPM; please echk the FPM SDN Forum:
[Floorplan Manager for Web Dynpro ABAP|Floorplan Manager for Web Dynpro ABAP]
Kind regards,
Florian -
Install instructions for Search Modeler and integrating with Apps 11i
Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startallBelow are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
[root@aussearchdev ~]# su - oracle
[oracle@aussearchdev ~]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall -
Urgent help with PIX 520 & downgrade to 4.X ver.
Hi all,
I need help with the problem which occured recently my colleague.We had got PIX 520
with ver 6.x. But my colleague inserted into floppy disc drive floppy with ver. 4.4.7 and rebooted PIX. And it downgraded
PIX OS.
From that time we cannot boot PIX.
I tried to create bootable disk and throught tftp insert newer PIX OS but I see still this output. And PIX still reboots.
On card with Flash inserted in PIX I see the jumpers. Could someone explain me meaning?
Any idea...??
BR
jlThis section describes how to change the PIX Firewall to an earlier version of the software than the version currently running on your PIX Firewall unit. You can only downgrade the PIX Firewall software if your platform supports the earlier version.
http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/upgrade.html#wp1016359 -
16-35 L USM lens and struggling with sharp focus and depth of field.
I just purchased the 16-35 L lens after reading all the reviews. I was previoulsy using the 24-70mm and was happy with the results. I am new to the Canon Mark 5D III and the new wide angle lens. I took pictures yesterday for over two hours and came back with no sharp images and no depth of field even when shooting at F/22. I zoomed in or moved close to my subjects expecting the images to be tack sharp but I am extremely disappointed. Not ONE of my pictures were tack sharp. What am I doing wrong? Are there correct settings for close-ups, landscapes and portraits with this lens? At F/22 I shoot 1/3 of the way into the picture expecting that everything in front and behind will be sharp. Not so. I am very frustrated as a newcomer to this camera. Please advise or guide me to a great source to learn.
thank you
Solved!
Go to Solution.It'd really help to see an example, it's hard to guess without seeing it.
You shouldn't have to stop down to f/22 to get a large DoF at 16mm. In fact, part of what you might be seeing is softness from diffraction at that aperture. Try f/8, the DoF is actually quite wide at that aperture.
What shutter speeds are you at? Yes, you can get away with much slower speeds with UWA, but it can still soften images.
Lastly, I've never been able to get results out of an UWA like I can with longer lenses or a prime. I can get good results, and they clean up quite nicely in post, but viewing untouched photos at 100% it's never sharp like a good prime, or even a good tele really. So I don't know what you're expecting out of it. It usually doesn't matter since UWA are used for larger subject matter than the other lenses... but that has been my experience. -
- How do I setup a DMZ zone with PIX 501 firewall? Do I need to use an additional router? I have CISCO 1605 at my disposal.
- If I can't do that, what would be an alterantive way to set an FTP server similarly to the DMZ way.
(We're using IPsec/GRE VPN between our 3 sites. we're on W2K network).
thanks,
olegWhen talking about setting up a DMZ, a PIX model with atleast three interfces is required. On a PIX 501, only two interfaces are available, an outside interface (ethernet) and an inside interface (availabe as a 4 port switch). For stting up a DMZ, you will need an additional interface and that would mean getting a higher model of the PIX. The idea of using a router on the inside interface and then configuring restrictive policies on it might work but will make the setup messy and you are unlikely to find a satisfactory level of support for it for the simple reason that not many neworks are deployed that way.
-
Finding Angle with respect to X axis in VB?
In my VB program, I used the FindStraightEdge function to get a line for a particular edge. I would like to know what is the angle with respect to X axis. In the Measurement Studio, I use the "Caliper" to find this angle; however, in VB the Caliper function doesn't seems to have an option of measuring angle. Am I missing something here???
I found the "FindAngleBetweenLines" function. Is this the only method to measure angle?
Thanks,
Simon TengSimon,
Probably the easiest way to do it is to create a variable that contains a line going from 0,0 to 1,0 and use the "FindAngleBetweenLines".
Another way is to use the endpoints of the line to calculate its angle relative to horizontal. You can use atan(dy/dx).
Bruce
Bruce Ammons
Ammons Engineering -
Illustrator CS5 Changing dot lpi and angle dialog box not opening
Hello! I am having trouble with Illustrator CS5 changing the dot lpi and angle. I have my problem typed out below the image. Please help if you can! Thank you!
You could also save yourself a lot of work by creating an ink template .ait with all of the angle/frequency values preset.
1) Simply create a new document, size the artboard to your typical size and create a series of color chips (squares) each colored with one of your typical inks. It looks like you're doing t-shirt seps so you probably have about 20 or so inks you use all the time.
2) Go into the print settings and set all of their angle and frequency values and click done.
3) Choose File->Save As Template (you can delete the color chips if you want at this point, the swatches will remain)
Now whenever you start a new document, choose File -> New From Template
Any new artwork you create can be colored with the existing swatches and you'll find the angle / frequency settings are already set.
Any forum posts links send to my twitter @ask_illustrator will be answered at the forum and via twitter. -
Measure rpm and PWM signals using digital input of NI9401 module
Hi, is there a simple way how measure rpm (to 5000 rpm) and PWM (about f=3kHz) signals using digital input of NI9401 (ultrahigh-speed digital I/O) module plugged in NI 9172 ? I will wellcome any suggestions and VI examples (bether still). I'm begginer using LView 8.2. I apologize for my poor English. Many thanks.
Hi CUA,
Since you have already the right tools, you just need to get started with the software. The NI-9401 will give you access to the counters that are inside the cDAQ chassis 9172.
You need to place the module in slots 5 or 6. You can read in how they work and how to configure them in the counters section of the user guide found here.
Now to measure rpm, you can either measure the period of the signal (seconds) and multiply by 60 to have minutes and the number of ticks per revolution. You can find a shipped example to read period called “Meas Dig Freq-Buffered-Cont-Large Range 2 Ctr.vi” found under Hardware Input and Output » DAQmx » Counter Mesurements
To measure PWM, it is similar procedure and you can read the semiperiod (high time or low time). There is also a shipped example called “Meas Semi-Period.vi” found under the same location.
There is great information for these kind of task at this page or just post back if you need to.
Hope this helps.
Gerardo O.
RF Systems Engineering
National Instruments -
Using deb/rpm installer scripts with ArchLinux?
I'm having an issue with installing some education software from a CD-ROM(LPL Symbolic Logic stuff), and although it supports Linux, the software is installed via either one of two installer scripts, one for dpkg and one for rpm. Since I have neither under Arch', I get these messages when running the shell scripts:
. extracting DEBs
. installing DEBs
lpl-2_5_0-linux-deb-installer: line 23: dpkg: command not found
...and the rpm one:
. extracting RPMs
. installing RPMs
lpl-2_5_0-linux-rpm-installer: line 23: command not found
It should be noted that I can't simply edit the install scripts or something, as it extracts the deb/rpm files from one of the only three files on the CD(and NOT the Internet): the installer scripts(the third file is the readme, which doesn't help in this case, if you're wondering).
Any information on how to get this program installed without having to resort to using WINE or my XP partition would be greatly appreciated.:/N/M, actually found out how to get it the raw rpm(or deb) files thanks to someone on the IRC channel(sorry, forgot your name already ><). If anyone somehow was in the same predicament, just comment out the lines with rpm and rm -rf in the script, run it, and change to the /tmp/extract.[whatever] directory and the files should be there.
-
I am using TACACS+ authentication and authorization for PIX integrated with the Cisco ACS 4.0
1. aaa authentication telnet console TACSERVER
2. aaa authentication enable console TACSERVER
3. aaa authorization command TACSERVER
Problem is:- When I execute disable command from the PIX privilege mode then I am not able to again enter into privilege mode by giving command Enable. It gives me a error message as command authorization failed.
Also while logging through console port, I get the prompt as PIX>. Now again after giving the Enable command same error message as above comes.
I feel command authorization is not working at PIX> prompt.
Need urgent solution...Hi Alqader,
I have already applied full privileges to the account. But still its not working. I feel authorization works only from Privilege or config mode. But when I disable from privilege mode and give Enable or any other command, it fails (As I am now in unprivilege mode)
Surprisingly it works very first time when I telnet the PIX and enter into Unprivilege mode i.e.PIX>..I am even able to enter privilege mode from here.
But problem arises only after DISABLE command and from Console Connection. -
Hi,
Hopefully someone can help me with this. We installed em Cloud Control 12c and its agents on miscellaneous machines.
We first proceeded with two target-nodes part of a Grid Infra cluster (let's call it proclu_1). OS is RH6.
Then, using the same method (1/ yum -y install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm and then
2/ /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we installed the agent on 2 other
blades that are part of another cluster (proclu_2). The agent.properties file above just contained the usual key-value lines:
OMS_HOST=omsmachine.stuff.be
OMS_PORT=4889
AGENT_REGISTRATION_PASSWORD=ametemp
AGENT_USERNAME=oracle
AGENT_GROUP=oinstall
AGENT_PORT=3873
ORACLE_HOSTNAME=promachine.stuff.be
Now if I change dir to /usr/lib/oracle/agent and search for the name "proclu*" from there, I find the name of the
first install (on first cluster proclu_1):
[oracle@bladb0406 agent]$ pwd
/usr/lib/oracle
[oracle@bladb0406 oracle]$ find . -name "proclu_1*"
./agent/agent_inst/sysman/emd/state/has/proclu2/cluster/proclu
./agent/agent_inst/sysman/emd/state/configstate/cluster/proclu_1
./agent/agent_inst/sysman/emd/state/statemgmt/cluster/proclu_1
./agent/agent_inst/sysman/log/targets/cluster/proclu_1
My questions:
1/ on the first two nodes (blada0204 & blada0406) of our first cluster doing this 'find' returns the
same directory names with "proclu_1", this is what we expected: where did the oracle-agt script pick up
our cluster name ?
2/ why has it set the same -and wrong- "proclu_1" name on our two other nodes (bladb0204 & bladb0406) ??
(we would've expected "proclu_2"...)
Is there a way to correct this, or should I reinstall the agent (after configuring/modifying something somewhere
so that it picks up the correct cluster name...) ??
Thanks a lot.
Regards,
SebUnfortunately, this goes back to the RAC install procedures. Check the cluster name for each cluster. If they're all installed the same, then you'll need to manually discover/edit name when you promote so that your clusters are unique in EM.
To verify name set for clusterware installation:
<CRS_HOME>/bin/cemutlo -n -
Drive bay fans high rpm and whine.
High RPMs and a whining noise (i.e. fan noise) with iStat Pro widget displaying high (2,700+ rpms) for my drive bay.
I see that on my G5 one of the fans is located so that I can not blast it with canned air so as to rid it of dust build up... which is probably why there is a low decibel but high pitched noise when the drive bay fans rev up.
Any ideas on how to get to it without having to completely take my tower apart?
I've had my Energy system preference set to 'Highest' for a long time (since I read that overall this can prevent fan rpms from going extremely high) and it seems to have been okay.
But I'm guessing that over the years this one fan... which can not be blown off... has accumulated lots of dust that is causing the problem.
Any advice would be greatly appreciated.
Thanks."I've tried to monitor Console....."
Activity Monitor (AM--in Applications > Utilities) is the better reporter of what's causing excessive fan activity as it calculates the CPU usage of each process. If you have not launched AM before, its default settings will not show enough detail to help. However, all you need to do to get a full picture of the load on your processor is to change AM's "Show" option from "My Processes" to "All Processes." Once changed, that setting is retained. Looks like this:
Others are reporting heating issues and short battery runtime after upgrading to 10.6.8. They all had Parallels emulation software installed. If you use Parallels, see this:
http://kb.parallels.com/en/111541
It could be your culprit.
Maybe you are looking for
-
Hi, Can anyone tell me what is the version of java needed for windows 2003 server with oracle 10g to install solution manager 4.0. Then, should we need to install JCE policy also. What is it, how to go about it? Thanks in advance, Sailesh K
-
Office 2010 Licensing in VDI Managed Pool
Hi all, I have a Server 2012 R2 VDI deployment that does not have Internet connectivity and hosts a managed pool that runs Office 2010 Pro. How do I properly license Office? thanks Pootie
-
Get/read stage background color
hello one and all, how do you read or get the stage's background color? then, how do you set the fill color of that stage color to a drawing object under a movieclip symbol? using flash cs4 and as3. lucas
-
Fixing Gamma in the ScreenFlow App. A How Too...
Sometimes when using the ScreenFlow App you might need to send the footage to FCP or Motion. The exported video from ScreenFlow will have an incorrect gamma, video will be (a lot) lighter. This is easily fixed... In the export setting window click on
-
Can some please tell me the differences between the two? I am a .Mac member, have an external HD, and am not sure which I should use. Thanks in advance.