RPS 2300 together with 3750 - 48 PoE and Cisco 2821

Hi,
I'm wondering what kind of power modules to include in RPS 2300 (750 or 1150 Watt) to provide redundant power supply for 1 x Cisco 2821 router (standart power supply) and Catalyst 3750 with PoE 48 ports.
Thanks

I am not qualified to answer your question... I would like to mention to be careful when calculating power for phones, because some of the phones (especially color) will take more power than others. We ended up only being able to support 24-ish phones on a 3750 due to power limitations.

Similar Messages

Original and current budget together with PTD,ITD,MTD and YTD labor...

Hi experts:
I need a Project Accounting Report that shows Original and Current budget together with PTD,ITD,MTD and YTD labor amount, labor cost, non-labor cost, and revenue on the same line for all the task_id for a project. I know these are coming from these ,PA_BUDGET_VERSIONS V, PA_RESOURCE_ASSIGNMENTS A,PA_BUDGET_LINES L, main tables. But I am unable to break down the amounts according to PA and GL periods. Can anyone help please?
Thanks a million , in advance.

Help you with what?
No database version number.
No application name or version number.
No DDL.
Do you, for some reason, think we have any idea what PTD and ITD are? If so why?
Do you think we all have your version of a table named PA_RESOURCE_ASSIGNMENTS on our hard disks?
Perhaps you have some version of e-Business Suite. Perhaps you have SAP. Perhaps you have something we've never even heard of.
Your task is as follows:
1. If this question relates to an Oracle product change the subject of the post to "Please Ignore" and post your question in the correct forum.
or
2. Provide us with sufficient information that we can duplicate those portions of your environment required to understand what you are asking.

Mavericks VPN dropouts with native VPN client and Cisco IPSec

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

LAN2LAN between ASA and Cisco 2821

Greetings,
Users on remote network behind Cisco 2821 reporting dropped connections to mail server behind ASA. 20-seconds later, the connections get re-established. I run a constant "ping" to the remote LAN and do not see a drop over the tunnel.
Any ideas?
Thanks.

Thanks for the quick reply.
As I understand what I've read - esmtp inspect is on by default on the ASA. Is that true? So - in this case - would I turn it on in the router as well? BTW: These two sites are on a LAN2LAN VPN .... does that change what you suggested?
Thanks.

Mbox together with LP 7.2 and 10.3.9 - does it work?

Before upgrading I`d like to know if anyone has already tried it out and if it works. I`me using the digi core audio driver 6.7

Geia sou Savva,
I believe that to upgrade to 7.2 you have to have Tiger installed
http://www.apple.com/logicpro/

Since updating my Ipad it has crashed showing the I tunes logo and charge cable I have tried holding down the top button together with the round button and it still goes back to the I tunes logo

how do i get my i pad back after it has crashed

I had asked this same question on Friday at work but had to wait until I got home to plug into my computer at home. I was able to at least get back on my ipad but it managed to download so much, such as all my apps, even the ones i had gotten. I had run the recovery mode several times as suggested, but now i have lost all my progress on games as well as my NY times subscription. I am going to try to reinstall my NY times app, but the games are from games center--does anyone know how to get my progress back on those games? Thanks so much!

Issue with hp ipaq 614c and cisco ap

Hello. I tried to connect an ipaq 614c to a cisco ap1131 using wpa-psk tkip with no success. The ipaq connects without any problem to other access points including linksys. I've tried odysey client and I get the message: waiting for keys. The event log of the AP says: Packet to client reached max retries, removing the client. I am able to connect with other models of ipaq to the ap. Anyone know what the problem might be? I also tried disabling QOS but the result is the same.

Is the ssid only config for 1 security policy? I had an issue one time where the SSID was config for both WPA and WPA2 and i had issues. It wasnt till i selected just a single security policy that it worked.
You may want to try a real simple key at first. Try connecting it to an open network. Start 'unpacking' it so to speak...
You may see more info if you go into the CLI of the controller and debug the client. Also, if you have a layer 2 analyzer (AirMagnet or Peek you may see something of interest...)

Problems with iOS 7 Mail and Cisco Unified Messaging attachments?

Does anyone out there use Cisco Unified Messaging in their workplace? I am seeing an issue with iOS 7 (7.0.0-7.0.2) where the following scenario occurs:
You check an email in the Mail app that is from the Cisco Unified Messaging system when you get a voicemail. The voicemail is left by Person A who attaches a subsequent voicemail from Person B and they leave an intro saying "Attached is a voicemail blah blah blah" The email from Cisco comes across as having a .wav attachment and then an email attachment with a .wav file inside (supposed to be the original voicemail from Person B). If you play both .wav attachments, it just plays the same audio and not separate voicemails (one being the intro from Person A and one being the original Person B voicemail). It seems to hold on to whichever .wav attachment you played first (e.g. if you play the Person B voicemail .wav file and then go to the .wav file that should be Person A's intro, it just plays Person B's voicemail).
We did not experience this with iOS 6 and have confirmed that things work just fine on phones that have not been upgraded to iOS 7. Email account on iOS devices is a Microsoft Exchange account.
I am sorry if this is already a known issue, but I've had trouble searching for results. Any help would be tremendous in hunting down this strange phenomenon.
Thank you,
-Ted

Does anybody have even any thoughts on this and whether it might be a known issue of any kind? Anyone seeing this with other .wav attachments outside of Cisco UM ?

Voip with hipath siemens 3800 and cisco router 2951

Hi all,
we have a projet with a Customer, we must must implement solution voip in theire structure, they have siemens hipath 3800 and i want to know if it work with Cisco 2951? if yes how? and there is a special configuration for this? and this solution support all features of voip ?
thanks for your attention.
Walid zahri

Hello, walidit01.
Check this link (http://cs.co/9000qMpY) for interoperability updates for CUCM Express. Are you already working with any Cisco partner or vendor for your client project?
Let me know if you have other concerns or e-mail ([email protected]) me directly.
Kind regards.

RedHat Enterprise Cluster and Cisco IGMP Snooping/Querying

Has anyone else had any experience with IGMP Snooping/Querying and RedHat Enterprise Cluster?
We have been experiencing a large amount of problems with this functionality.
We are running IGMP Querying in our environment and we recently set up a second querier.
Here's the steps we took
Existing querier: 192.168.3.248
Everything was running fine.
Added a new querier on a different switch: 192.168.3.247
At this point, all of our RedHat Enterprise Clusters fenced themselves and needed to be restarted in order to restore
access. In order to restart the RedHat Enterprise Clusters, the physical servers must be rebooted.
Are there any known issues with RedHat Enterprise Clustering and Cisco Switches (3750
series)? I would expect the querier change to be seamless, but it does not seem that this
is the case.

Hi,
In our organizaiton we have Red Hat Cluster with 2 cisco switch (Model: cisco WS-C2960S-24TD-L, Version: "flash:/ c2960s-universalk9-mz.122-55.SE3/c2960s-universalk9-mz.122-55.SE3.bin").
- We are using HP Chassis c7000 and Server is on the chassis. There are 2 service IC & Med. Each server has one service primary and other secondary running.
- The two cluster switches are connected each other with Ether channer trunk (1+1) link. Also these 2 switches are connected to our Mgmt switch for Server Admin access to HP Chassis via OA port. The Red Hat system has cluster lan (pri & sec) & OA lan (01 & 02 of HP chassis) connected to Cluster switches. The Mgmt VLAN is 501 - 172.31.10.0/24.
Problem:
When the CluserSW01 goes down the cluser shifted to CluseterSW02 with Cluser_Secondary_LAN and OA2. But when the ClusterSW01 switch comes again than the communication breaks and cluster don come up.
I was thinking this is either STP or IGMP, well sure though. As these are production systems hence we also couldn't do much more test as well.
If you have face any such issue or have experience with it or know what the problem might be... kindly share with me.
Thanks,
Adnan

The Advantages of Official Microsoft and Cisco Certification Training Courses

Lots of professionals in design and networking management channels are desirous to obtain various recognized Microsoft certifications like MCSE (Microsoft Certified System Engineer) and MCSA (Microsoft Certified System Administrator). These Testking
642-446 certifications can shift you from average low rewarding jobs as a programmer towards prosperous and lucrative career. People are crazy today to do anything to obtain such certifications. They invest their time, money, and energy toward achieving
their goal certifications.
But beware of internet scammers who commonly lure people into buying various second-hand tutorials and self-study oriented training programs, promising great results with Testking SY0-201 minimal efforts. However at the same time lots of reliable and solid
web sites are available also, providing comprehensive, well structured, and elaborate study material. It definitely facilitates your process of learning and guaranteeing success.
It is very important to distinguish a difference between an average and a reliable website. Take time out of your busy schedule and focus on your study course. It is better if you attend a short classroom Testking 640-863 training course instead of using
self-study oriented programs. If you search online you will come across various websites providing advanced MCSE and MCSA accelerated training courses, seminaries, laboratories, taught by experienced, well educated experts. That is why these classes are better
than self study programs because they involve better comprehension and learning, more participation, stimulating students' thinking and enhancing their overall skills and knowledge. If a person attends 14 days training course of MCSE or MCSA then he is capable
enough to formulate a solution in design and Testking VCP-410 network management issue with the help of well-trained professionals. In fact these training classes make the candidate capable of all practical abilities that help him in future career. Training
program of MCSE or MCSA guarantee graduates acceptance in the best multinational companies of the world!
Apart from MCSE and MCSA, Cisco certified Network Associate CCNA and Cisco Certified Internetwork Expert certification CCIE are highly demanded in present era. There are various training institutions providing a comprehensive and elaborate training to
the candidates. These training centers quickly familiarize the students with latest Cisco technologies and hardware. During CCNA and CCIE training sessions , attending students receive constant support and feed-back from well-trained, experienced and certified
professionals. The instructors here focus not only on theory but at forming and enhancing Testking 642-481 students' practical skills on various aspects of Cisco technologies and hardware. Thousands of graduates recommend professional CCNA and CCIE
training courses to people who wish to build a solid, strong, successful career in the IT field.
At the end I would like to recommend Testking MCSE training,Testking CCNA practice test, Testking CCIE training for gaining best guidance for the exams.

MCSE (Certified Systems Engineer
for Microsoft) and MCSA
(Microsoft Certified System
Administrator). These globally recognized
certifications are highly desirable because they can
easily make the difference between a thriving career
in the lucrative design and average
low rewarding job as a programmer. (Cisco
Certified Network Associate) and CCIE
(Cisco Certified Internetwork Expert)
certifications are also in demand today.
There are several training centers that offer people
the opportunity to participate in the development of
training programs for CCNA and CCIE
in exchange for a reasonable sum of money.
When attending a CCNA five or
six days and the CCIE training course, students can
quickly become familiar with the latest technologies and
Cisco hardware.For more info about this exam Latest Dumps PDF Exam Question visit Examcollectionvce.com

Strange behavior with 3560s and RPS 2300

I just installed an RPS 2300 in a small branch office that has a pair of WS-C3560-24PS switches. There are two odd things I'm noticing:
1) When I do "show env rps", it shows the RPS detected but I don't get any information about it.
Switch#show env rps
SW Status RPS Name RPS Serial# RPS Port#
1 Active <>
2) When the switch loses power it fails over to the RPS just fine, but does not fail back to regular power automatically. I have to unplug the RPS.
I've installed same model RPS with a pair of 3750-Es switches, and in that case, "show env rps" from the switch shows me the RPS information, and failback happens when regular power is restored.
Is there something different about the 3560s, or did I miss something in the configuration? The switches are running 12.2(55)SE7, IP Services.

Yes, just found via searching automatic failback is only supported on the 3560-E and 3750-E.
https://supportforums.cisco.com/message/3669961#3669961
Also noticed the "power rps" commands are only supported on the 3560v2, so those won't work for me.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_52_se/command/reference/3560cr/cli1.html#wpmkr11908996
What's funny is while the exec commands don't work, the config-mode commands do.
Switch#power rps name serialnumber
Can not execute cmd on legacy switch 1
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#power rps deviceid serialnumber
Oh well. I've been wanting to replace the 3560s with 3750Gs, so this is yet another reason to do so!

RPS 2300 and 3825 router.

Hello I have an RPS 2300 connected to the front of a 3825 router. When the main power (internal power supply) of the 3825, it stays on after switching to the RPS 2300 power, but if the internal power supply of the 3825 gets its power back, it does not switch back. How do I make it switch back to its internal power with out rebooting the router?

Hi,
I'll quote from the manual:
"The switch connected to the RPS 2300 might restart when it changes from RPS power to its internal power. We recommend that you first divert switch traffic to an alternate switch to avoid data loss. This does not occur on the Catalyst 3750-E or Catalyst 3560-E switches."
It's not very impressive when a vendor says something might restart, and this certainly isn't what you wanted to hear, but it looks like that's the way it works.
HTH
Andrew.

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

How can I create a client console and work together with the Cache Server?

How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
The following is the cache server file: contacts-cache-server.cmd
@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exitEdited by: junez on 23-Oct-2009 09:20

Hi
To run the console, change DefaultCacheServer to CacheFactory
Paul

RPS 2300 together with 3750 - 48 PoE and Cisco 2821

Similar Messages

Maybe you are looking for