RS232 with FPGA crio - anyone done this ?

Does anyone have code to receive RS-232 with FPGA?  I have downloaded RS-232 example that contains RS-232 transmit code, i just need receive to complete my interface.  any FPGA code would be appreciated.

Attached is an updated version of the code on DevZone for LabVIEW FPGA 8 which includes code for reading and writing RS-232 data.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
Attachments:
RS232xmpl.zip ‏528 KB

Similar Messages

  • I have an issue with Iphoto, it has told me to reinstall it has anyone done this? Can you help?

    Hello
    I have an erro message come up when I try to start up iphoto, it suggests I reinstall it. Has anyone done this before?
    I originally down loaded iphoto by disc 3 or 4 years ago, i do not have the disk anymore.
    Can i uninstall iphoto and then buy it from the app store and will it keep my photos or will i have to reinstall them as well?
    Many thanks someone!
    Rosie

    Yes you can purchase iPhoto 11 on the App Store. It will update your Library. But, as always, make a back up first.
    Regards
    TD

  • Lenovo s12 3g sim slot, can this be done? has anyone done this

    hi all i was looking for some advice before i attempt this project, surely someone else must have attempted this before me
    i want to install a wwan controller a sierramc8775 and wwan antenna so i can install my sim card and run 3g
    as anyone done this? if you have i would appraciate the name of the controller, drivers and software and a guide on how this was done
    has anyone done this? it seams a shame the s12 has this capability but it is not neen used
    any info would be appreciated

    Hi and welcome there.. 
    known a  user who got 3G working in S12 ION ....with  Huawei UMTS Modul EM770  in conjunction with a self layered antenna.. 
    SE 3507 could be one possible 3 G  and
    Gobi2000
    But Sierra mc 8775  will not work... 
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Tune2fs reserve space?? Anyone done this?

    I came across this nice article from TuxRadar: Command Line Tricks for Smart Geeks
    http://www.tuxradar.com/content/command-li...cks-smart-geeks
    I read this and was wondering if anyone had any experience with this:
    Reclaim disk space
    Filling a partition to 100% can have an unpleasant effect on your system. When services and other programs cannot write to their log files, or cannot save data in /var, you could be in trouble. These programs won't be able to save their data, and typically quit out (or, in some extreme cases, crash dramatically!). To avoid this, the ext2 and ext3 filesystems reserve 5% of their capacity for only root processes to use. This is a good idea, but 5% is a lot on large drives - for instance, it's 25GB on a 500GB drive. Also, there is no need to reserve any space on a filesystem not used for root files, such as /home.
    The good news is that not only is this 5% not hardcoded into the filesystem, it can be changed on the fl y without disturbing the your data and files. Tune2fs is used to tune various parameters of an ext2 (or ext3) filesystem. It can be used to change the volume label or the number of mounts between forced execution of fsck and a host of other, more esoteric settings, but the options we are interested in here are -m and -r. The former changes the percentage of filesystem blocks reserved for the root user, while the latter uses an absolute number of blocks. So:
    tune2fs -m 2 /dev/sda1
    reduces the reserved area to 2% of the filesystem, which may be more appropriate for if you have a large / or /var filesystem. If you're using a drive of 500GB or larger, this is the best option.
    This line of code:
    tune2fs -r 0 /dev/sda1
    sets the filesystem to have no reserved blocks, a good setting for /home that doesn't need a reserved area for the superuser.
    My root partition is only 20gb but my home partition is 718gb, I thought doing this would be a good ideal since going by the article I probably have like 40gb of reserve on my /home partition. The problem is I have all my data on this partition and do not want to risk loosing anything even though I have most of it backed up. So I was wondering has anyone done this before?
    Thanks
    Last edited by securitybreach (2009-11-17 03:44:27)

    Yep. I did it on all of my external drives, but I came to experience some weird behaviour ( can not recall exactly what is was now) when I changed from 5% to 0%.
    Try 1% - works nice for me.

  • I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to  ICloud Drive or not?  Has anyone done this?  Is it awesome?  I need to be able to access my resume from phone. I think this will help me achieve this.am i right?

    I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to  ICloud Drive or not?  Has anyone done this?  Is it awesome?  I need to be able to access my resume from phone. I think this will help me achieve this?  Am i right?  Is there any body out there right now that could help me?  I'm thinking about going from 8.1.3 to I guess yosemite?  Or is that for Mac computers?  I don't understand the language entirely on the help page.   Anyone's straight forward and easy stepped advice would be much appreciated.  I'm so frustrated and I need a job so badly!  Drowning in debt.  Any help appreciated!
    Thanks,
    A

    You're a Windows user, correct? If so, read here:
    http://support.apple.com/kb/DL1455

  • HT201270 Has anyone done this update? Is this update worth it? what are the main features of this updates?

    Has anyone done this update? Is this update worth it? what are the main features of this updates?

    What version are you on now ? If you are on 5.1.0 then the update to 5.1.1 is very small - from here :
    Improves reliability of using HDR option for photos taken using the Lock Screen shortcut
    Addresses bugs that could prevent the new iPad from switching between 2G and 3G networks
    Fixes bugs that affected AirPlay video playback in some circumstances
    Improved reliability for syncing Safari bookmarks and Reading List
    Fixes an issue where 'Unable to purchase' alert could be displayed after successful purchase
    If you are on an earlier iOS version then you will get the intermediate updates as well e.g.
    iOS 5.1 : http://support.apple.com/kb/DL1504
    iOS 5.0.1 : http://support.apple.com/kb/DL1472

  • I just want to do the iphone 4 software upgrade and I keep going around in circles. Had anyone done this? Thx

    I would like to do the iphone 4 software upgrade, but keep going in circles , has anyone done this? thanks

    "Going in circles" - are you talking about yourself or something about the phone?  What happens in vagueness stays in vagueness. 
    FYI, > 30 million have successfully updated their iP4.

  • Campaign e-mail with unsubscribe facilty. Has anyone done this?

    We may need to have the functionality to process and remove customers from future campaigns when we send out e-mails via the use of an unsubscribe feature within the e-mail. Has anyone done such a thing.
    I looked for example videos in the CRM area. http://www.sdn.sap.com/irj/scn/crm-elearning?startindex=1
    But could not find anything relavent there.
    Jason

    Still no news on this. I have been unable to find a solution, but refuse to believe that nobody has implemented this feature as Unsubscribing from e-mail is common-place nowadays.
    Jason

  • Monitor Spanning with macparts.de, anyone tried this?

    Gang,
    I am looking for a new desktop and I was thinking of a iMac G5 2.0GHz. But I really need 2 monitors and so I saw that this guy has this firmware update that allows multiple monitors on iBooks, iMacs and others.
    I can see what he is doing but there is very little information on what can be done, resolution etc... I have a 19" Priceton LCD on my PowerBook I would like to use with the iMac.
    Anyone used this? upsides? downsides?
    THanks
    Gordon

    Hi Gordon. I'm encouraged by your post. You clearly know more about this stuff than I do, but I'll try to lay out a couple facts as I know them.
    The 'video out' port on the iMac is physically the same as on the 12" Powerbook. Ie. both Mini-DVI to VGA and Mini-DVI to DVI dongles that come with the PB (and neither of which come with the iMac - $20 each) will physically fit into the back of the iMac.
    Apple offers the Mini-DVI to VGA adapter as an option for the iMac - same part number and everything.
    The video card with Rev. B iMacs is the same card as low-end PowerMacs. Obviously it has software crippling to better-distinguish the two lines. Spanning Doctor should realize it's full potential - which as you say SHOULD be able to push out a DVI image as well as VGA.
    My LCD is the same res. as yours (which is a stupid Microsoft-invented resolution that's not even close to 4:3). Some months back (when I was first researching my switch to Mac and before I bought my PB) I saw a page showing a Rev. A iMac spanning to a 17" LCD but they used a VGA-DVI converter because - according to that guy - the iMac could only output to VGA while his LCD was DVI only, so he had to convert. His claim that it's only VGA-out seems to stem from the Apple specs - but then those specs also say it can't span.
    What are the conflicts that you've read about? Any specific posts I should read? I keep hoping some experienced Mac geek will come on and tell us that the software's great and it spans beautifully to DVI.
    I'm confident that the video card on the Rev. B iMacs will easily push both monitors. My PB with half the VRAM (and a mid-grade 64mb card at that - the nVidia as opposed to the beefier Radeon that the 15" PB comes with that's also 64mb) is sufficient: expose and dashboard and other VRAM intensive tasks are fluid and lovely.
    As for PowerMacs, I'd love one, but it is a lot more money. I spend most of my times overseas, so I need a Mac that can be carted around in a suitcase, so the iMacs size/feature ratio is a big bonus for me.
    Hate to sound like a parroting prognosticator, but if you're even somewhat in the market for a PowerMac don't buy till after Sept. 20th (Paris Expo) when many believe they'll launch dual-dual PowerMacs.
    Any thoughts about the matched-pair debate? I don't think I'd be satisifed with 1gb, 1.5gb is unmattched, and I wonder if 2gb is over-kill. I'm entirely unsure about the whole thing.
    Anyway, I'm sad that since I'm selling my PB (with both dongles) I'll have to re-buy both VGA and DVI dongles for the iMac since I plan to also drag the iMac around as the ultimate Keynote Companion (I'm already dreaming of scanning my 'notes' pane on the much-bigger screen than 12" PB). Might look for a cheaper DVI-VGA adapter and just buy the one over-priced Apple adapter.
    Keep me posted on what you're thinking!
    Thanks,
    Alex
    <

  • Need help with Backup problems - anyone seen this before?

    I am experiencing 2 primary problems:
    1) When attempting a recent backup with HotSync on my desktop PC (Treo 700p, HotSync Manager v. 6.01, XP): I hadn't backed up for a few weeks, and this time it crashed sometime during the backup of the Calendar (and this behavior is repeated).  So I then unchecked the backup of Calendar, but then it just hung on Contacts for about 15 minutes, so I realized it wasn't doing anything anymore (I have lots of contacts, but not not 15 minutes worth).  At this point I gave up, but I obviously need to figure out how to make HotSync work again.  Any ideas?
    2) (not sure if this is the forum to address this): When using Backup Buddy v. 2.04 a couple of days ago, every time I tried to backup, it would get maybe 1/5th into the backup and crash and restart.  I figured out in short order that Address.DB is what was causing the crash. [I tried to e-mail the file so I could examine it and save it, but just attaching it in SnapperMail made the device crash].  So I took the chance of deleting the Address.DB (as it seemed small and didn't appear to contain any backup information), and it looks like all of my information was retained.  My question here is: two times since the initial problem, something has recreated Address.DB, which again causes the 700p to crash, so I have had to delete it again.  So when is this file being (re)created, and what is the purpose of it?
    An additional (minor) difficulty that I've had occur on a couple of occasions: After a recovery (where my BackupBuddy information was more current than my HotSync data), I restored, and all the calendar entries were double - 2 identical entries adjacent to one another. Has anyone seen this?
    Thanks in advance -
    B
    Post relates to: Treo 700p (Verizon)

    Sounds like the device has become corrupted.
    Post relates to: None

  • Has anyone done this before? (using Win32 dll with Java)

    I was wondering if anyone has succesfully completely embedded a Win32 DLL and having it launched in a Java backend using JNI? It would seem that WinMain() would be the barrier to doing this. I'm talking about containing the entire frontend inside a DLL and having it launched using a Java backend.

    1. As far as I know, dll's don't have winmains.
    2. Your wording is rather imprecise; how about getting rid of "frontend"and "backend", and asking your question again?
    (The JNI features of java allow either C or java to be the "main program; C can call java, and java can call C.)

  • Has anyone done this...please help me

    Hi all,
    I have downloaded a PDF for accessing Backend access. I have done all the configurations specified there, before running I deployed and created JCos and tested, they were executing fine. Even I checked by giving TC SE37 and given some values...there also it was working fine. But when I ran the appl, I got Runtime Error saying like:
    <b>Failed to process request
    com.sap.tut.wd.example.model.types.Bapisfldat could not be loaded: com.sap.dictionary.runtime.DdException:</b>
    If anyone has done the FlightList app, please tell me what else to be done? Where I went wrong?
    Thanks&regards,
    Ganesh

    Hi Ganesh,
    Remove the model class. And Recreate the model class with current setup.
    try this.
    Kind Regards
    Mukesh

  • I wish to move my music library and playlists from a laptopn running Vista 32bit  to Windows 8 and cannot find an avenue to accomplish this. Has anyone done this successfully?

    I wish to move my music library and playlists from a laptop running windows Vista 32bit to our new PC with windows 8. Has anyone successfully accomplished this?  Where can I find detailed instructions?

    See this migrate iTunes library post.
    tt2

  • HT4623 Having updated to ios 6.1.3 I am having problems with wifi has anyone resolved this please?

    I updated my iPad retina to ios6.1.3 and it now will only keep me connected to Internet via wifi for a couple of minutes and runs very slowly. Any solutions please?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • OBIA 7.9.5 to 7.9.6 upgrade - anyone done this?

    Has anyone here done, or is doing, an OBIA 7.9.5 to 7.9.6 upgrade?
    We're about to begin a project to do this, and I'm interested in any experiences or problems encountered etc.
    cheers.

    We're in the middle of an upgrade from 7.9.5 to 7.9.6 here. The only portion we rolled out in 7.9.5 is Human Resources. The 7.9.6 version has additional functionality for Human Resources (I-Recruitment, Learning, etc). Also projects is new to my understanding.
    Please note that if you have implemented 7.9.5 Human Resources the upgrade to 7.9.6 can be a pretty intense process. The changes in regards to Human Resources were significant to say the least.
    Best of luck!

Maybe you are looking for