RSBOLAP 017 Java Communication Error
Hi,
When iam opening query in Report Designer following error occurs :RSBOLAP 017 Java Communication error : RFC DEstination NOT_CONFIGURED does not exist.guide me for the same to resolve this one.i want basis support for to resolve the same.
Thanku
Hello,
I have tried to use BEX Web Application Designer and I have recieved this error.
I think that I need to configurate the SAP Netweaver portal with the previous mentioned steps.
1. Create RFC Destination in J2EE Engine
2. Create RFC Destination for the Portal
3. Maintain Portal Server Settings for the Portal
4. Maintain Single Sign-On in the BI System
5. Export BW Certificate to the BI System
6. Import BW Certificate to the Portal
7. Create BW System in the Portal
8. Configure User Management in the Portal
9. Export Portal Certificate to the Portal
10. Import Portal Certificate to the BI System
11. Set Up Repository Manager for BW in the Portal
12. Maintain User Mapping in the Portal
13. Import SAP Basis Plug-In to the BI System
Do you know any guide that can helps me to configurate the SAP Netweaver portal?
Your answer will be gratefully received.
I am looking forward to hearing from you.
Best regards,
Similar Messages
-
Java Communication Error - WAD
Hi
I get a 'Java Communication Error - Error when opening RFC Connection' when I save or try to execute my web template.
Any help how to fix this problem...Summary
Symptom
You are using SAP Netweaver 2004s Web Application Designer.
An operation that you want to perform is answered by a popup saying:
"Error during RFC communication (subrc = ...)", followed by the a certain
function name and in most cases an information that the portal or java
communication has failed. The message usually has the message class
RSBOLAP, numbers are 15, 17, 18.
This may occur during an operation like Save Template, Load Template,
Validate Template on Server, Load Reusable Web Item, Save Reusable Web
Item, Get Valuehelp, Execute Template in Portal, Publish Template to...,
Download of Metadata, and others.
All of these operations use functionality from the Java Server in some way
or the other, so they require a valid connection.
Function modules that may be mentioned in the error message (the list is
not complete) are:
RZX2_BTMP_SET, RZX2_BTMP_GET, RZX2_BITM_SET, RZX2_BITM_GET,
RSWAD_WEBPUB_CALL_SERVICE, RZX2_MIG3X70_DATA_GET, RSWAD_METADATA_GET,
RSWAD_TEMPLATE_SERVICES, RSWAD_PF_WEBPUBGETVH, ...
This note also applies if you for example change a Web Template, save it,
and the changes do not seem to be reflected when executing the Template
again.
More Terms
Setup, RSBOLAP015, RSBOLAP017, RSBOLABP18, RSBOLAP, 015, 017, 018, 15, 17,
18
Cause and Prerequisites
The Web Application Designer needs an active and valid Portal connection
for most of its operations. It can not be used without being connected to a
BI backend system (Netweaver BI Server).
Additionally, the connectivity Java->ABAP and ABAP->Java has to work for
the user currently logged on.
The usual communication flow is like this:
1. The frontend calls for a service on the Netweaver Server.
2. The call first meets the ABAP server.
3. The call is processed in the ABAP server as far as possible, and then
(if necessary) forwarded to the Java server.
4. The Java server processes the call as far as possible, and if
necessary calls another service functionality on the ABAP server.
5. The result is sent back on exactly the same way that it has arrived
25.01.2007 Page 2 of 3
SAP Note Number 916090
RFC-error messages in Web Application Designer 2004s
(in the most complex scenario: ABAP back to Java, then back to ABAP,
and then back to the frontend).
So if either the call from ABAP to Java fails, or the later call Java back
to ABAP does not work, an RFC-error occurs, leading to the error message in
the frontend.
Solution
This is not an error in the Web Application Designer.
When such an RFC-connection error occurs, the call from the Web Application
Designer frontend to the backend has not worked or not received a result.
In most cases, this means that the requested operation could not be
performed.
It may be that only the current call has failed, while the connectivity in
general is set up correctly. This may be for example, if the maximum number
of concurrent connections for the Portal is reached at the moment.
For that reason, please wait a few moments or minutes, and try again to see
whether the operation can be performed then.
In most cases, however, the connectivity is not properly configured, so the
call will not return a result also during the second and all following
tries.
In that case please ask your system administrator to set up the ABAP->JAVA
and JAVA->ABAP connectivity in a valid way (at least for your user...).
Please use note 888687 and 917950 (and their related notes) for the task.
If you do not succeed, please make sure to provide all the information
requested in these notes in your message. Otherwise an efficient message
processing is not possible, postponing the solution unnecessarily.
Header Data
Release Status: Released for Customer
Released on: 27.02.2006 11:11:38
Priority: Recommendations/additional info
Category: Consulting
Main Component BW-BEX-ET-WEB-AD WEB Application Designer (Publishing)
Additional Components:
BW-BEX Business Explorer
BW-BEX-ET Enduser Technology
BW-BEX-ET-WEB BEx Web ABAP Runtime
BW-BEX-ET-WEB-RT WEB Run Time
Valid Releases
25.01.2007 Page 3 of 3
SAP Note Number 916090
RFC-error messages in Web Application Designer 2004s
Software Component Release From
Release
To Release and
Subsequent
SAP_BW 70 700 700
SAP_BW 710 710 710
Related Notes
Number Short Text
953109 RSPOR_SETUP: "Option Unicode flag is not set (ABAP is Unicod
917950 SAP NetWeaver 2004s: Setting Up BEx Web
888687 BEx Web Java: Analysis of communication/logon problems
Attributes
Attribute Value
weitere Komponenten 0000000050
weitere Komponenten 0000030974
weitere Komponenten 0000032291
weitere Komponenten 0000034475 -
Bex Web Application designer - Java communication error
I was trying to use the Web template to displayed in the Web browser when this error occured, "RSBOL. 017. Java communication Error: An unknown error occured during portal communication"
Would like to get help and know how to solve this error. Thank you.Emily,
use my blog which will really help you understand the communication flow and help you resolve your issue !!
restarting is not even an option in this case as the problem still exists and the way to determine the problem is described in my blog
check it out..
The Cloak and Dagger about Portal and BI Connectivity
hope that helps.. -
Java Communication error:Error while opening an RFC connection
Hi,
I am getting Java Communication error:Error while opening an RFC connection when i try to run a query from Bex analyser.
please let me know how to resolve this
Thanks
Bala DuvvuriThis error usually comes when the java stack is not upgraded.
when you upgrade yourABAP stack, simultaneously you have to upgrade the java stack also.
Please co-ordinate with your basis team to inform EP team to upgrade the java stack when basis team do ABAP stack upgrade.
Hope this would help you. -
Java communication error - RFC destination NOT_CONFIGURED does not exist
Hello,
We are facing problem when sending reports(BEx Quert) through broadcasting to the users. We are getting the error "Java communication error RFC destination NOT_CONFIGURED does not exist" in the Log Display (Tcode: RSRD_ADMIN).
In the broadcasting setting, if we select variable values in the tab "General Precalculation" then we can able to send the report to user, instead of selecting variable values, if we use the option "User Specific" check box in the tab Receipient(s) (which will take selection from the role authorizations defined in the respective user roles), then we are getting the above error.
Recently we have upgraded suppor package, please find the system details below
P_BASIS - SAPKB70025
PI_BASIS - SAPKIPYM12
SAP_BW - SAPKW70027
Java - Support Package 25
We didn't change any roles and authorizations recently, just upgraded to latest SP. Can anyone suggest if any steps or checks need to be perfomed after applying these SP or missing anything?
Thanks in advance
Regards,
VenkateshHi,
This is configuration issue. Please check the configuration between BW and EP below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&overridelayout=true
Thanks,
Venkat -
BEX Web application Designer displaying Java Communication Error
Hi,
When we are using the BEX Web application Designer to create new web template, it throws error saying "Java Communication Error: An UnKnown Error Occured During Portal Communication."
====================================================
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
====================================================
Kindly help to resolve this issue.
Regards, KrishHi,
Please check below document for connection between BI and Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d082fe32-5037-2b10-3288-fd009f695c74
You might be doing something wrong in any of these steps.
Regards,
Kams -
RSBOLAP 018 Java system error in BEx Web Application Designer
Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
OscarHello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB -
There is a RFC connection not working connection test fails.
I found out the RFC is using a a program id that is not registerd.
When I register the program on os level like rfcexec -r -a <program_id> -g <hostname> -x <sapgw> the connection test on the rfc works.
The problem with the rfcexec is that it just works as long as the os session is active.
From what I´ve read I need to configure this on java side in the web dynpro content administrator.
Can you help me with that ? When I try to click Create jco destination I get an error.Hello Vioar,
rfcexec is only a standard program for testing, you sould not register it for your application on the gateway.
Since you are getting "User is not allowed to read any data..." - did you logon with the correct user? Does this user have enough authorizations?
Regards,
Alwina -
Java system error: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY
We've setup BI 7.0 (EP) using SSO to our ECC 6.0 system leveraging EP on our BI box. Anyways, SSO is activated and working when EP on the BI system calls a BSP or a Transactional iView using ITS on ECC 6.0.
Our issue is when we execute a report BI (EP) utilizing RRI to a transaction in ECC 6.0 we're receiving the following error with SSO:
Termination message sent
ABEND RSBOLAP (018): Java system error: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY to ProgId COHPSAP06D_PORTAL_BPD on host cohpsap06d with SSO not authorized: Authenticatio
MSGV1: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY to ProgId CO
MSGV2: HPSAP06D_PORTAL_BPD on host cohpsap06d with SSO no
MSGV3: t authorized: Authenticatio
When we didn't have SSO enable we recevied the typical login screen for the ITS. After we setup SSO we cannot even log in now.
--KALHello Kal,
Am not very sure of the solution but to drill down to the exact cause you can do this small test:
1. In the reference system in Portal, you can remove the ITS enteries like ITS hostname, etc, keeping the rest of the enteries unchanged.
Now, if the exception goes..this shows that the exception could be due to some wrong ITS entry or somewhere related to ITS
If the issue persists then looking at the exception it feels like you should check the in Portal Visual Admin...
Hope this helps.
All the best,
Ritu -
Bex Web designer. Java ccommunication error. Error when opening rfc connec
Dear All,
Whenever we open Bex web designer we get a error message box " Java communication error : Error when opening rfc connection"
This error seems to be due to incorrect BW and Portal configuragtion.
Can anybody let me how to correct the error by doing the right BW and portal configuration. I serached many documents as well as in sdn but no concrete procedure is provided. I am in need of urgent help regarding this.
Thanks in advance.
Warm regards
MazdulIn one of the notes therre was a link. I opened the link in my portal server. There was a check list where all the conditions that were not met were marked with red. I corrected most of them according to the check list. Now the error is due to SSO not configured properly.
BEX should work fine when this is done.
Warm Regards
Mazdul -
Communication error, CPIC return code 017, SAP return code 236
Hi guys,
Need your advice, my SAP system suddenly appear this messages ( SM21).
Please assist me.
Communication error, CPIC return code 017, SAP return code 236
> CPI-C function: CMINIT(SAP)Hi Uday,
My SAP using ABAP. Version 4.7
All RFC working fine except for the OSS
Error message
Details Page 2 Line 22 System Log: Local Analysis of ALBANIA 1
Time Ty. Nr Cl. User Tcod MNo Text
13:52:36 DIA 01 800 SYSADM R49 Communication error, CPIC return code 017, SAP return code 236
Details
Recording at local and central time........................ 27.03.2009 13:52:36
Task................ 57584 . 01 D1 Dialog work process No. 01
User................ SYSADM
Client.............. 800
Terminal............ 10.0.38.
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... STSK -
Communication error, CPIC return code 017, SAP return code 450
Hi All,
can anyone please tell me more about this error Communication error, CPIC return code 017, SAP return code 450 which is displayed in sm21.
We done post configuration of pi server yesterday, after the configuration we were able to log into Integration Directory and Visual Administator..
But today were are not able to log into both .....while logging into both we are getting authentication error 401.
we checked for users being locked but all users are not locked..even even tried reseting passwords,
also restarted the server but didnt help..
Reward points for helpfull Answers.
Thanks and Regards,
Srikanth.Hi Naidu,
Most common reason encountered for this problem is authorizations on installation. it is important to have both network and local machine admin rights when installing content server software. If you don't, the installation will be successful but you encounter the 401 error. Try reinstalling with correct authorization and you should resolve the issue.
Try regenerating the roles. SU01 -> display each XI user -> open the roles -> double click on the role -> click on the User tab in the role screen then there will be a button for USER COMPARISON do that for all the roles in red.
If that does'nt work out, Take a look at OSS Note 751856 and 796726.
May be your security roles were not adjusted during the upgrade (Note 796726).
if found worth pls do the req
Thanx
Sampath -
Communication error, CPIC return code 017, SAP return code 223
In sm59 its throughing error Communication error, CPIC return code 017, SAP return code 223 for SAPOSS connection.
Return code 223 is Network read error.
Check out SAP Note : 421558, it may help you.
Regards,
Zaheer -
Activity report failed(Communication error)- while check-in Activity
Hello SDN,
I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
CHECKIN Finished24s.9Files scuceeded.
ACTIVATE Activation Performed.Build request ID : 166
Internal Problem(Activity report failed(Communication error
[cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
to resolve this issue.
GET_STATUS could not retrieve activation status of request '166' (Unable to connect to
host:port-Address already in use:connect(Service call exception; nested exception java.io.
IOException: Unable to connect to host:port-Address already in use:connect))
regards,
Sree.Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
Problem with Java Communication API
hi
I installed the Java Communication API on win32 platform (as per the guidelines)
Now when I try to run the sample program 'Blackbox' for the serial port, I get an error (in fact an exception is generated inside main function in BlackBox.class file)
I tried the SimpleRead.java example but that too generated the same exception
Can anybody help me out.... I am a novice with Java Comm APII tried running the sample BlackBox program provided for serial port and now it says
No Serial Ports Found!
I verified that both comm.jar and javax.comm.properties are in the <JDK>\lib directory.
Actually, I am using netBeans IDE 1.4 and I used the C:\J2SDK folder installed with netBeans for the Java Communicaion API
plz help.
Maybe you are looking for
-
My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?
-
Firstly please excuse me if I am talking rubbish as I am not the best at using nor understanding oracle. I have been using MySQL an SQL Server for the last 3 years and only starting using oracle at work a few months back. So I want a personal version
-
Quicktime Add-In for .avi files
I want to play back (& export into iMovie) a couple of .avi files I've downloaded. Clicking the file, launches Quicktime (by default) which displays a message that says a Quicktime component is missing. Clicking continue takes me to the Quicktime sit
-
How do you retrieve emailsafter hitting the archive box
had couple emails disappear when I hit archive,,anyway to get them back
-
Need HELP please i got problems with my HP recovery
Please help i can't do anything on my Hp ProBook 4520s dont know how too recovery it i use bios HDD Self Test and it stop on Test2 on 10% and it dont do anything. I don't have any CD. I'm not good at this but what is the boot device or how can i do i