Rscrm_bapi query

Is it possibe to load data from query with restricted key figure(new selection),calculated key figure(new formula) and into ODS or CUBE using RSCRM_BAPI.......

Hi Raj,
It is not possible to get all the Keyfigures (calculated key figures and restricted key figures) in RSCRM_BAPI.
You can only get the basic key figures and Characteristics of the query.
Regards,
Ravi Kanth

Similar Messages

RSCRM_BAPI Query output in Process Chain

Hi,
I am using RSCRM_BAPI to get the query result into table and from this table i am extracting data into another infoprovider.
Here i am planning to schedule this RSCRM_BAPI Execution in Process Chain,i don't have any option to include this in Process Chain.
Can anybody help me regarding this issue
Thanks
Madhu

Hi Madhu,
I dont think option is available to include RSCRM_BAPI in Process Chain.
Hope it Helps
Srini

Query in extraction using RSCRM_BAPI

Hi ,
We have a RSCRM_BAPI query created on a multiprovider. The infoproviders have amount Key figures in it. So 0currency is associated along with the key figures.
0plant Fis period Key figure1 key figure 2 key figure 3
While we try to generate a CSV file using RSCRM_BAPI, the file generated has a blank column next to every key figure.
we are expecting the output file to be of the same format as specified above.
we need to load this file into another flow.
What we could fgure out was that every Key figure has a blank clumn for currency, which we dun want to provide.
Please provide me a solution to generate the file exactly as the sam format.
Thanks and regards,
Srivatsan.s

Hi,
Please use NODIM in the query for the key figures.
-Vikram

RSCRM_BAPI jobs canceled

Hi,
I did an extract from RSCRM_BAPI query. since the data was huge we did it in 4 steps first initializing then doing update.
The jobs canceled after 2 hours.
The system has been recently upgraded to 2004s. it is just a technical upgrade.
can anybody suggest if there are any changes needed to be done.
Thanks,
Joe

Hi,
In Se37-check the RSCRMBW_MON_STATUS_DISPLAY FM, check the code and execute and go to details why it has been cancelled.
Hope this helps.
Thanks,Ramoji.

Query on RSCRM_BAPI

Gurus-
My Query has 142 columns and I am trying to export the query output to a word document using RSCRM_BAPI.
When I check the output file which I got through RSCRM_BAPI, it is truncating lot of columns. Is there any limitations with the columns if we use RSCRM_BAPI transaction? if so how many?
Please revert me back with ur suggestions.
Thanks in advance

Hi,
As per note Note 605208 - RSCRM - Restrictions: RSCRM uses the ODBO interface. This interface has a restriction of 20 dimensions. ( Characteristis and structure used in the query are considered as dimensions ).
Hope this helps...

Problem in executing query in RSCRM_BAPI & output in application server!

hi Experts,
We executed a query using RSCRM_BAPI transaction and write it to the application server.We found the following problem.
In the query we have restricted the keyfigures such that each have 2 decimal places but when we execute the query using RSCRM_BAPI and writing into the application server the more than 2 decimal places are coming in to the file.
For example:
In the query the value is 12.12 but in the application server its written as 12.1200000
So the width gets elongated and some of the keyfigures are truncated.
We have already have gone through the restrictions in the SAP Note Number 605208
Please help us to find a solution to get output of keyfigures same as whatever coming in the output of query.
Thanks in advance
Somenath

sorry, i mistakenly sent it in different id....this is my id.......if it is useful assign points to this id...
Using RSCRM_BAPI, RSCRM_REPORT, suitable for simple query.
In your query you are using Restricted, calculated keyfigure.in that case RSCRM_BAPI, RSCRM_REPORT has some restriction.
Check OSS 605208 which describes RSCRM_BAPI restrictions .
Re: Master Data Datasources
You can Modify the Wrtiequery abap program for your requirement.
or
Create a ABAP program for extracting a bw query and upload it in Application server in csv format.
Thanks,
senthil kumar

Using TCOde rscrm_bapi and a query result in a error

Hi All,
When using tcode RSCRM_BAPI the query execution results in a error Query Meta data is Incomplete
Please suggest me the solution for this ASAP.
Regards,
Varma

Hi Varma,
is the query working fine?? Otherwise use transaction RSRT2 and "generate a new report"! This should fix problems with query.
Regards,
Adem

Slicer in Query (In the Tcode:RSCRM_BAPI)

Hi,
I wish to know the significance of the SLICER when we get into rscrm_bapi transaction.
kindly explain me what is the significance and uses of it.
Thank you,
Regards,
Ram

Hi,
Thank you, can you also please tell me if we can put up any characteristics of rows under it as i am having more than 16 characteristics.
If NO, can you tell me is there any other way where we can have more than 16 char using rscrm_bapi to send the query ouput to a table.
Thank you,
ram

How to schedule Query Extracts using RSCRM_BAPI

Hi,
Can you give me the link to the document How to schedule Query Extracts using RSCRM_BAPI . I do not have userid password to view the same.
Thanks for the help.

Hi,
this is the link for the document..
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004400232004E
thnks.

Query to cube using rscrm_bapi

can we load data from a query with newselection to cube using rscrm_bapi.
During check these warings occurs
Key figure (F) is not a basic key figure
Key figure has no fixed currency; requires currency conversion
please suggest
Regards,
Raj

Hi All,
I have already tried with APD, but no luck.....
following error occurs
while executing APD, following error occurs
The technical field name KYF_0001 for field D56LC57R0X09TDN1TCY56IDF4 may only appear once per input or output structure....
and then no execution is possible and that particular field has been mapped between source and target.
also have query with char structure
so then started with RSCRM_BAPI........in here i have structure in cloumns with new selection and new formula..........and now i get this messg
Key figure (F) is not a basic key figure
Key figure has no fixed currency; requires currency conversion.........(how do i check this......at cube level one one currency........)
help needed
Regards,
Raj.

Using RSCRM_BAPI to convert data from Query and load into PSA to DSO

Hi Experts,
I have a complex query which is being executed in BeX.
I need to go in the reverse direction and extract the data from the Query and load into the PSA and then to a DSO.
I am using RSCRM_BAPI for this purpose and have got data into the extract table successfully.
But , my query has some variable screen wherein we need to give some inputs for selection.
I have create those Infoobjects and put them in the DSO.
How do I capture these inputs of the selection screen for storing in fields of my DSO as the Extract table does not store these inputs ???

write the whole insert query desired by you with the help of excel formulas.they are very easy or google 'how to use excel formulas".
then copy the fromula to whole set of data in excel fields.
run the insert query in excel as batch.
i hope this helps.

Problem extracting, query with display attributes, in RSCRM_BAPI.

Has anybody experienced that problem?
When I execute the extract, the job cancels itself after 2 minutes. Sometimes even shuts down the DEV server.
There is no Dump in ST22.
The only error I get is:
TRUNCATE TABLE "/BIC/0CZTEST" where ZTEST is the extractor
But when I execute the extract with the same query without the display attributes it runs just fine.
Help please...

Check Table("/BIC/0CZTEST") using T-code "SE14".
If necessary, drop and creat, again.
Good luck.

Query Extract (rscrm_bapi): Influence Job Name

Hi,
I'm using txn rscrm_bapi to extract data to a table. The job name that is used when i run the extract process is always the same. It's a fixed alpha numeric string. Is there a way to change the job name? I want it to have a descriptive name like RSCRM_BAPI_EXTRACT_DATA.
Thanks,
Audrey

Hi Audrey,
I had the same problem ... don't think it's possible to modifiy the Job Name. Let me know if you will find a soluton.
Bye
GFV

Saving query results to a flat file

Hello Experts!
We have a very specific issue on our current project and I would like to know if any of you have ever done something similar. We are taking query results from BW (after complex calculations, some based on SY-DATE) and saving them to flat files to transfer to a SQL database structure on the Enterprise Portal. From here, the portal team renders the information into more "static" dashboards that include mouse over features and even limited drilldown (i.e. no matter where a user clicks the report always drills down on profit center)
There are many reasons why the model is set up as such (mostly training of executive level end users), and even though it doesn't mesh with the idea that BW could do this work on its own, we have to work with what we have.
We have come up with 3 possible ways to save this data to flat files and hopefully someone can tell us which might be the most effective.
1.) Information Broadcasting. If we broadcast XML files to the portal, will the portals team be able to read that data into a SQL database? Is there another way to use broadcasting to create and send a flat file to specific location?
2.) RSCRM_BAPI. This transaction seems to not support texts.
3.) Open Hub. In order to get the open hub to work, we first have to save all of our query results to direct write data store objects using APD. (calculations based on current date, for example, would require daily full loads to the underlying data providers otherwise.)
What is the best way to accomplish this? Is information broadcasting capable of doing this?
Thanks!

Hi Adam,
Do you have to use flat files to load the information to a SQL database? (if so maybe someone else has a suggestion on which way would be the best).
I try to stay away from flat file uploads as there is a lot of manual work involved. May I suggest setting up a connection to your SQL table in the DBCON table and then writing a small abap program to push data into the SQL database (which you can automate).
1) Use APD to push data into a table within BW.
2) Go to transaction SM30 > table DBCON and setup a new entry specifying the conncection parameters to your SQL database.
3) In SE38 Write an ABAP program along the folloing lines (assuming the connection you set in DBCON is named conn1:
data: con_name like dbcon-con_name
con_name = 'conn1'.
exec sql.
set connection :con_name
endexec.
****have a select statement which reads data from your table which the data is saved from the APD into an internal table**********
****loop on the internal table and have a SQL insert statement to insert the records into the SQL table as below******
exec sql.
insert into <SQL TABLE> (column names seperated by ,)
values (column names of the internal table seperated by ,) if the internal table is named itab the columns have to be specified as :itab-column1
If you decide to take this approach you may find more info on DBCON and the process in sdn. Good Luck!
endexec.

Query extraction to a flat file

We have a requirement to extract the query result and send it as a flat file to a different system. The query is created on a multi provider and the key figures have lot of restrictions. We currently use RSCRM_BAPI for this. Would like to know if there is a better options, if any one has used it.
Thanks,
VJ Sudharsan

Hi,
It might help you:
Program to run query and save to flat file
Best regards,
Eugene

Rscrm_bapi query

Similar Messages

Maybe you are looking for