RSRT usage

Hey Gurus
I got a request from an end user ( a non IT director) requesting access to RSRT. I am not sure how much he know about RSRT usage. What are the pros and cons of giving him access to RSRT in production system. I need to justify if I reject his request. What damage can he  do with RSRT  ignorantly?

hi Sam,
i agree with Bhanu, RSRT is more for IT than user,
e.g 'read mode' setting impact to query run performance, improper setting may cause poor query performance, take a look following doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d589190-0201-0010-f19a-c74465ce6e0f
hope this helps.

Similar Messages

  • Step by step usage of RSRT for Query performance

    Hi,
    Can I get any step by step document, how to test the query performance using RSRT?
    I am sorry if this has been posted already. I tried my best to search for this but could not find this
    Thanks
    Ananth

    Olap cache settings
    RSRT u2013> choose a query u2013>properties u2013> Cache Mode: Persistent Cache per Application server, Persistence Mode: Flat File.
    RSRT
    http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf

  • Full text not getting displayed while using RSRT

    Hi,
    I am facing issue while downloading data using RSRT in BI system.
    When I go to RSRT and execute a report the output doesn't display full text for a characteristic. i.e. the characteristic has a size of 60 characters, but only 30 chars ( approx) are being displayed as report output in RSRT.
    COuld anyone here please help me in getting the full text using RSRT transaction?
    I am not using Bex here for the reason that the output has more than 1.8 lac records and hence I get an error while using Bex
    WHen I try to execute this report using Bex for a small selection I could see full text there.
    And there is no text master data maintained for this characteristic.
    Thanks in advance for your replies.

    Hi,
    As you said you have 1.8 Lac records, There is no point in increasing the size to maximum number possible i.e 65K .
    You have following three options to satisfy your requirement.:
    1.    Usage of  web reporting for export of more than 65k rows. According the note: 1127156 - Safety belt: Result set is too large, in BW version 7.x it I possible to set parameters that would allow such a massive export of data.
    2.    Functionality of OpenHubs. Data can be placed directly into the files (e.g. in CSV format) on application server. Be careful here OpenHubs are specially licensed and by using it there are additional fees.
    3.    Coding of custom ABAP report which runs BW query and gets all its output and saves it in the flat files.
    Please let me know if this info is helpful.
    Regards,
    Krishna Tangudu

  • Can we debug WAD queries as we do BEx queries in RSRT

    Gurus,
    I am working with a WAD report and want to test what value is being passed from the frontend to the query. Can I debug this in RSRT as we do a BEx query. If yes, how, if not, how can I debug my WAD queries and see what is the value being passed to a user exit from the WAD?
    Thanks for your help.
    Thanks,
    Venkat

    Hi Venkat,
    you can set some parameters in url for web applications like
    - debug=X (includes all JavaScript files directly in HTML result and displays additional information)
    - trace=X (records an OLAP trace)
    - snippet_operations= (disables snippet operations)
    - javascript= (disables usage of JavaScript)
    - no_session_cookie=X (forces session encoding with URL rewriting)
    You should try debug=X and trace=X...
    Take a look:
    How to Debug a BEx Web Application NW 7.x Java
    SAP Note Number: [1128976 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313238393736%7d]
    [Tips & Tricks for SAP BI Web Applications|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/902c3e76-fc1c-2a10-c4ab-c734b06603ba]
    This thread could be also helpful (setting breakpoints in bex web)
    Re: User exit : RSRT - OK, error in BEx
    Regards
    Andreas

  • Aggregate Usage Value

    Hi,
    Will the Aggregate Usage Value keep increasing as we use it in the query??I used it many times,it only shows the usage value as 1.

    RSRT is the best bet here. This will answer you following things:
    It allows to Execute & Trace queries in a debug mode with several   parameters -
    Don’t use Aggregates
    Don’t use buffer
    OLAP use
    Display SQL etc.
    Which Aggregates are being used?
    OLAP Cache usage?
    Which Statistics is generated?
    Hope this helps

  • Usage of Aggregates

    Hi,
    I have created some aggregates on Infocube to improve the performance of some outbound reports(i.e we extract data from infocubes and send to external systems) but i am not sure whether that program is hitting the aggregates or not( as i didnt see much improvement in program performance)i know that we have "USAGE" in aggregates maintenance screen to know whether aggregate is used or not but what i guess is that "usage" will be updated only when a Querry uses aggregate..(I am not sure)?!!! ,I am trying to find usage in debug mode but i am not able to track really there...
    Is there anyother way to know usage of aggregates ...?
    Thanks in advance
    BRB

    hi BRB,
    welcome to SDN...
    you can try to check aggregate is used or not using transactin rsrt, click 'execute+debug' and option 'aggs' -> 'display aggregate found', 'select aggregate'.
    also take a look this doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
    hope this helps.

  • Aggregates Usage? How can we find out?

    Hi all,
    I would like to know which are all the cubes using the built aggregates.
    These should be seen in one place.
    At the same time, I would like to know whether the built aggregate is used by any cube or not.
    not in maintain aggregates. Other than that.
    not in RSRT also, there we can select Display aggregate found & can be checked whether the report is fetching the data from Aggr or Cube.
    Do we have any reports for this purpose or any Tcodes?

    Hi,
    If you want to check which all cubes have aggregates then go to RSDDAGGRDIR - Directory of Aggregates. The usage can be find for a particular aggregate can be find by going into that aggregate, there you will find a column Usage. You can check the usage there.
    Hope it helps you...
    Assign Points if it helps..
    Regards,
    Gattu

  • Cache clearing during high planning usage

    Hi
    I was going through some performance notes for Integrated Planning and one of the suggestions there was Cache clearing during high planning usage.
    What does this mean and how can it be performed
    Thanks
    Rashmi.

    Hi Rashmi,
    what is the note you mentioned?
    The OLAP cache usually is a mechanism to improve performace, though there might be case where the 'administration' of the cache creates some extra costs that may lead to better results without using the cache. But there are no general guidelines when this might happen. This heavily depends on the data model, queries and data access pattern.
    In planning - as explained in note 1056259 - caching might be used via the planbuffer queries. These are system generated queries involved when input ready queries read transaction data. The query name is CUBE/!!1CUBE (aggregation level on an InfoCube) or MPRO/!!1MPRO (aggregation leve on a multiprovider). Via RSRCACHE (or also via RSRT, button 'Cache Monitor') you can check the caches. Via RSRT you can also deactivate the cache for a query or planbuffer query. You may play with these settings.
    Caching is working best if the same data are shared for different users. But in planning different users sharing overlapping data in change mode will lock each other. So one might share actual data. One also might try to do a cache 'warm up' using a filter that creates caches that can be reused by different users. This would mean that plan users have non-overlapping selections but the warm up would be done before with a union of some of the filters used by the plan users. But how to do this in detail and whether it is worth the effort can only be answered in the customer project.
    Regards,
    Gregor

  • Difference between RSRT and RSRTRACE?

    Hello Guys,
    Please help me to understand the use and differnec between RSRT and RSRTRACE ?
    and one more Question is realted to IEMON ?
    What is iemon?
    what are the advantage of using iemon in BW3.5 version?
    How to check whether IEMON is used in the current project or not?
    If i need to download iemon - doi need to get any approval from SAP?
    your answer will be highly appricated.
    Thanks,
    Nithi.

    HI,
    The Query Monitor (transaction RSRT) allows you to execute queries and to trace queries in a debug mode with several parameters (e.g., do not use aggregates, do not use buffer, show SQL statement).In the debug mode, you can investigate if the correct aggregate(s) are used and which statistics the query execution generates. For checking reasons, you can switch off the usage of aggregates, switch to no parallel processing (see for more details in the MultiProvider section) or display the SQL statement and the run schedule.
    Moreover, you set some performance-related query features in RSRT: read mode and OLAP query
    cache mode.
    If you discover single queries that you wish to improve in terms of performance,you should execute them in RSRT in the debug mode, and analyze which aggregates are used and which statistics are generated.
    The Query Trace Tool (transaction RSRTRACE) allows you to record some important function module calls and process and debug them at a later stage.
    Transaction RSRCATTTRACE takes the log of RSRTRACE as input and gives aggregates suggestions for the first execution AND all further navigations performed.
    Trace whole query navigations from users and analyze every step as described in the Query Monitor section.
    More information can be found in BW Documentation and SAP note 99010 (Description of the trace tool for RFC links).
    You can find lots more in the PDF, link given below:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fb4502-111c-2a10-3080-df0e41d44bb3&overridelayout=true
    Hope this helps.
    Thanks,
    rahul

  • Problem with Firefox and very heavy memory usage

    For several releases now, Firefox has been particularly heavy on memory usage. With its most recent version, with a single browser instance and only one tab, Firefox consumes more memory that any other application running on my Windows PC. The memory footprint grows significantly as I open additional tabs, getting to almost 1GB when there are 7 or 8 tabs open. This is as true with no extensions or pluggins, and with the usual set, (firebug, fire cookie, fireshot, XMarks). Right now, with 2 tabs, the memory is at 217,128K and climbing, CPU is between 0.2 and 1.5%.
    I have read dozens of threads providing "helpful" suggestions, and tried any that seem reasonable. But like most others who experience Firebug's memory problems, none address the issue.
    Firefox is an excellent tool for web developers, and I rely on it heavily, but have now resorted to using Chrome as the default and only open Firefox when I must, in order to test or debug a page.
    Is there no hope of resolving this problem? So far, from responses to other similar threads, the response has been to deny any responsibility and blame extensions and/or pluggins. This is not helpful and not accurate. Will Firefox accept ownership for this problem and try to address it properly, or must we continue to suffer for your failings?

    55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
    And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
    Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

  • Problem with scanning and memory usage

    I'm running PS CS3 on Vista Home Premium, 1.86Ghz Intel core 2 processor, and 4GB RAM.
    I realise Vista only sees 3.3GB of this RAM, and I know Vista uses about 1GB all the time.
    Question:
    While running PS, and only PS, with no files open, I have 2GB of RAM, why will PS not let me scan a file that it says will take up 300Mb?
    200Mb is about the limit that it will let me scan, but even then, the actual end product ends up being less than 100Mb. (around 70mb in most cases)I'm using a Dell AIO A920, latest drivers etc, and PS is set to use all avaliable RAM.
    Not only will it not let me scan, once a file I've opened has used up "x" amount of RAM, even if I then close that file, "x" amount of RAM will STILL be unavaliable. This means if I scan something, I have to save it, close PS, then open it again before I can scan anything else.
    Surely this isn't normal. Or am I being stupid and missing something obvious?
    I've also monitored the memory usage during scanning using task manager and various other things, it hardly goes up at all, then shoots up to 70-80% once the 70ishMb file is loaded. Something is up because if that were true, I'd actually only have 1Gb of RAM, and running Vista would be nearly impossible.
    It's not a Vista thing either as I had this problem when I had XP. In fact it was worse then, I could hardly scan anything, had to be very low resolution.
    Thanks in advance for any help

    55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
    And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
    Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

  • Problem with JTree and memory usage

    I have problem with the JTree when memory usage is over the phisical memory( I have 512MB).
    I use JTree to display very large data about structure organization of big company. It is working fine until memory usage is over the phisical memory - then some of nodes are not visible.
    I hope somebody has an idea about this problem.

    55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
    And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
    Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

  • What causes cellular data usage to decrease if last reset has not changed? I reset every pay period cuz I do not have unlimited and was showing 125 mb sent/1.2g received. Now showing 98mb sent/980mb received. Last reset still shows same

        I reset my cellular data usage every month at the beginning of my billing period so that I can keep track of how much data I am using thru out the month. I do not have the unlimited data plan and have gone over a few times. It's usually the last couple days of my billing cycle and I am charged $10 for an extra gig which I barely use 10% of before my usage is restarted for new billing cycle. FYI, they do not carry the remainder of the unused gig that you purchase for $10 which I disagree with. But have accepted. Lol  Moving on.
        I have two questions. One possibly being answered by the other. 1. Is cellular data used when I sync to iTunes on my home computer to load songs onto my iPhone from my iTunes library(songs that already exist)? 2. What causes the cellular data usage readings in iPhone settings/general/usage/cellular usage to decrease if my last reset has not changed? It is close to end of my billing cycle and I have been keeping close eye. Earlier today it read around 180mb sent/1.2gb received. Now it reads 90mb sent/980 mb recieved. My last reset date reads the same as before. I don't know if my sync and music management had anything to do with the decrease but i didn't notice the decrease until after I had connected to iTunes and loaded music. I should also mention that a 700mb app automatically loaded itself to my phone during the sync process. Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage? Guess turned out to be more than two questions but all related. Thanks in advance for any help you can offer me. It is information I find valuable. Sorry for the book long question.

    Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage?
    1) No.
    2) It does provide an estimated usage, but it's not accurate. For accurate determination, you should check the remaining/used MBs from the carrier (most of the carriers provide this service for free).

  • I am having a data excess usage issue with my Jetpack although I did not use the VZW network at all.

    Background: My home does not have access to landline internet and I am relying on a Verizon Jetpack device rather than satellite cable for internet access.  Within my JetPack wireless network I have several devices connected, iPADs, PC’s, printer, etc. (up to 5 devices can be connected with my system).  Recently, I had one device within my immediate wireless network that I needed to transfer data via FTP to another local device within my immediate network.  The receiving device FTP’d data from device (198.168.1.42) to local IP (address 192.168.1.2).  To understand the data path a Trace rout for this transfer is 198.168.1.42 (source) to 198.168.1.1 (Jetpack) to 192.168.1.2 (receiver).  Note that the VZW network ((cloud)/4G network) was NOT used in this transfer nor was any VZW bandwidth used for this transfer (of course less the typical overhead status/maintenance communications that happen regardless). Use of the VZW bandwidth would be something like downloading a movie from Netflix, (transferring data from a remote site, through the VZW network, into the Jetpack and to the target device).  I also understand if ones devices have auto SW updates that would also go against the usage as well.  I get that.  My understanding of my usage billing is based data transfer across the VZW network.
    Now to the problem: To my surprise I was quite substantially charged for the “internal” direct transfer of this data although I didn’t use the VZW network at all.  This does not seem to be right, and doesn’t make much sense to me.  Usage is should be based on the VZW network not a local Wi-Fi.  In this case, Verizon actually gets free money from me without any use of or impact to the VZW network.  Basically this is a VERY expensive rental for the jetpack device, which I bought anyway.  Considering this, I am also charged each time I print locally.  Dive into this further, I am also interested in knowing what is the overhead (non-data) communications between the jetpack router and devices and how much does that add up to over time?
    Once I realized I was getting socked in bandwidth, as a temp solution I found an old Wi-Fi router, created a separate Wi-Fi network off the Jetpack, but the billing damage was already done.  Switching each device back and forth to FTP and print is a hassle and there should be no reason the existing hardware couldn’t handle this and charges aligned with VSW usage. Is purposely intended by Verizon? Is this charging correct? And can I get some help with this?
    Logically, usage should be based on VZW network usage not internal transfers.  All transfers between IP addresses 192.168 are by default internal.  Any data that needs to leave the internal network are translated in to the dynamic IP addresses established by the VZW network.  That should be very easily detected for usage. In the very least, this fact needs to be clearly identified and clarified to users of the Jetpack.  How would one use a local network and not get socked with usage charges?  Can one set up a Wi-Fi network with another router, hardwire directly from the router to the Jetpack so that only data to and from the VZW network is billed? I might be able to figure out how to have the jetpack powered on but disable the VZW connection, but I don’t want to experiment and find out that the internal transfers are being logged and the log sent after the fact anyway once I connect…. A reasonable solution should be that users be able to use the router functions of the Jetpack (since one has to buy the device anyway) and only be billed for VZW usage.
    Your help in this would be greatly appreciated. Thanks

    i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
    Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.66 GHz
      Number of Processors:
    1
      Total Number of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    8 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MBP71.0039.B0E
      SMC Version (system):
    1.62f7
      Hardware UUID:
    A802DE22-1E57-5509-93C5-27CEF01377B7
      Sudden Motion Sensor:
      State:
    Enabled
    i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
    the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it.  i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
    tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
    if you need screenshots or data of anything else as away
    [problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain

  • High memory usage when many tabs are open (and closed)

    When I open Firefox the memory usage is about 70-100 MB RAM. When I'm working with Firefox I often open 15-20 tabs at once, then I close them and open others. Memory usage increaes up to 450 - 500 MB RAM. After closing the tabs the usage usually decreases, but after sometime. It starts decreasing very slow and never comes back to the level from the beginning. After few hours of work Firefox uses about 400 MB RAM even if one tab is open. First I thought it's because of my plugins (Firebug, Speed Dial, Adlock Plus) but I've checked it and it's not. I reinstalled Firefox but the problem occurs as well. I'm not sure if it's normal. Could you help me, please?

    Hi,
    Not an exact answer but please [http://kb.mozillazine.org/Reducing_memory_usage_(Firefox) see this.] The KB article ponders through various general situations which may or may not be applicable to specific instances but nevertheless could be helpful.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

Maybe you are looking for