Rsync script - ignore some files, include others?
I am using an rsync script to backup files from one Mac to another. I have the "--ignore-existing" flag set to avoid copying files that haven't changed. However, there are certain files that I ALWAYS want to sync, regardless of whether or not they've changed. Is there a flag that I can add that will allow me to specify the files? They should be easy to run a match on, since they all contain the word "library" somewhere in their filename.
If I understand correctly, you're synchronizing two iTunes libraries with rsync, while iTunes is running on the receiver, and it doesn't immediately register the changes. That's the expected behavior. iTunes loads its library file when it starts up, and it doesn't expect the library to change during the session unless it makes the change itself. Copying unchanged files will have no effect on that behavior. rsync has no way of notifying iTunes that the library has changed.
If you want to share an iTunes library between two machines, you have three options: (1) make the library folder an AFP sharepoint; (2) use the synchronization features built into iTunes; or (3) if you insist on changing the library externally, quit and relaunch iTunes on the receiver to make it recognize the changes.
Similar Messages
-
I need to send a client some collected projects, but the File > Dependencies > Collect Files command is not collecting some of the files (after the project has been reduced, so all the files in the project are required), including the project file!
I just end up with a collected folder containing a "Footage" folder that includes some of the files and not others. This is a nightmare!! There are hundreds of files that will take days I do not have to manually track each file down.
Any suggestions?
JReport created:
04/02/2014 22:56:00 GMT
Project name: Campaign Overview 2.aep
Source files collected: All
Collected comps:
ROUND PERCENTAGE
SCATTERGRAPH
Round dot
GRAPH
ROUND PERCENTAGE 2
ROUND PERCENTAGE 3
BAR PAIR
Numbers
Numbers 2
Forex-Abstract-01-CS5
Forex-Volume-CS5
Forex-Abstract-03-CS5
Blue Yellow Squares
ROUND PERCENTAGE 4
SCATTERGRAPH 2
Forex-Abstract-New1
Forex-Abstract-New2
Abstract New Bars
Forex-Abstract-New3
Campaign Overview 30sec 01
Campaign Overview 30sec Draft v1
Campaign Overview 30sec 02
Campaign Overview 30sec Draft v2
01 - Opening Titles 2
Campaign Overview 30sec 04
GRAIN
30 sec Text 1
30 sec Text 2
30 sec Text 3
30 sec Text 4
30 sec Text 5
30 sec Text 6
30 sec Text 7
30 sec Text 8
Campaign Overview 60sec Draft v1a
Campaign Overview 60sec 01
60 sec Text 3
60 sec Text 4
01 - Opening Titles 3
60 sec Text 5
60 sec Text 9
60 sec text 10
60 sec text 11
Forex-BasicGraph
Sliding Chart 1
Sliding Chart 2
Campaign Overview 60sec 02
60 sec Text 12
Campaign Overview 60sec 03
Campaign Overview 60sec 04
60 sec Text NEW 11a
60 sec Text 6
Campaign Overview 30sec 02 alt
Campaign Overview 60sec 04 - Alt
60 sec Text NEW 1a
60 sec Text NEW 1b
60 sec Text NEW 1c
60 sec - Where football meets trading - 3 sec white
60 sec - Where football meets trading - 3 sec white Alt
60 sec - Where football meets trading - 6 sec white
60 sec - Where football meets trading - 3 sec blue
60 sec - Where football meets trading - 3 sec blue Alt
60 sec - Where football meets trading - 6 sec white
30 sec NEW 4a
30 sec NEW 4b
30 sec NEW 4c
30 sec NEW 4a 2
30 sec NEW 4b 2
30 sec NEW 4c 2
60 sec Text NEW 5a
60 sec Text NEW 5b
60 sec Text NEW 5c
60 sec Text NEW 5a 2
60 sec Text NEW 5b 2
60 sec Text NEW 5c 2
60 sec Text NEW 6a
60 sec Text NEW 6b
60 sec Text NEW 6c
60 sec Text NEW 6a 2
60 sec Text NEW 6b 2
60 sec Text NEW 6c 2
60 sec Text NEW 7a
60 sec Text NEW 7c
60 sec Text NEW 7b
60 sec Text NEW 7a 2
60 sec Text NEW 7b 2
60 sec Text NEW 7c 2
60 sec Text NEW 8a
60 sec Text NEW 8b
60 sec Text NEW 8c
60 sec Text NEW 8a 2
60 sec Text NEW 8b 2
60 sec Text NEW 8c 2
60 sec Text NEW 9a
60 sec Text NEW 9b
60 sec Text NEW 9c
60 sec Text NEW 9a 2
60 sec Text NEW 9b 2
60 sec Text NEW 9c 2
60 sec Text NEW 10a
60 sec Text NEW 10b
60 sec Text NEW 10c
60 sec Text NEW 10a 2
60 sec Text NEW 10b 2
60 sec Text NEW 10c 2
60 sec Text NEW 11b
60 sec Text NEW 11c
60 sec Text NEW 11a 2
60 sec Text NEW 11b 2
60 sec Text NEW 11c 2
60 sec Text NEW 12a
60 sec Text NEW 12b
60 sec Text NEW 12c
60 sec Text NEW 12a 2
60 sec Text NEW 12b 2
60 sec Text NEW 12c 2
60 sec Text NEW 13a
60 sec Text NEW 13b
60 sec Text NEW 13c
60 sec Text NEW 13a 2
60 sec Text NEW 13b 2
60 sec Text NEW 13c 2
60 sec Text NEW 14a
60 sec Text NEW 14b
60 sec Text NEW 14a 2
60 sec Text NEW 14b 2
60 sec LOGOS 01a
60 sec LOGOS 01b
60 sec LOGOS 01c
60 sec LOGOS 01d
60 sec LOGOS 01a 2
60 sec LOGOS 01b 2
60 sec LOGOS 01c 2
60 sec LOGOS 01d 2
LTT Text 01 - Prepare
LTT Text 01 - Execute
LTT Text 01 - Analyse
LTT Text 01 - Vincent Trading Account Charity
LTT Text 01 - What moves currency prices? FA
LTT Text 01 - What moves currency prices? TA
LTT Text 01 - Risk Management
LTT Text 01 - Recap
30 sec NEW 3 sec - Insights from MCFC players
30 sec NEW 6 sec - Insights from MCFC players
30 sec NEW 3 sec - Play our stats game
30 sec NEW 6 sec - Play our stats game
30 sec NEW 3 sec - Discover your trader personality
30 sec NEW 6 sec - Discover your trader personality
30 sec NEW 3 sec - Learn to trade with Vincent Kompany
30 sec NEW 6 sec - Learn to trade with Vincent Kompany
30 sec NEW 3 sec - Help raise $50,000
30 sec NEW 6 sec - Help raise $50,000
30 sec NEW 3 sec - Follow Vincent’s trading
30 sec NEW 6 sec - Follow Vincent’s trading
30 sec NEW 3 sec - Are you prepared for the challenge?
30 sec NEW 6 sec - Are you prepared for the challenge?
60 sec launching 13.02.14 - 3 sec white
60 sec launching 13.02.14 - 3 sec blue white
60 sec launching 13.02.14 - 3 sec white Alt
60 sec launching 13.02.14 - 6 sec blue white alt
60 sec launching 13.02.14 - 6 sec white
60 sec launching 13.02.14 - 6 sec blue white
60 sec mcfc.forex.com where football - 3 sec white
60 sec mcfc.forex.com where football - 3 sec blue white
60 sec mcfc.forex.com where football - 3 sec white Alt
60 sec mcfc.forex.com where football - 3 sec blue white Alt
60 sec mcfc.forex.com where football - 6 sec white
60 sec mcfc.forex.com where football - 6 sec blue white
Campaign Overview League Table
FPOTW-JA
Discipline
Row 3 - Edit
Middle horizonal
Middle vertical
lines white
Table
Copy
Average
Poly
Overall Results
PENT
Poly 2
PERCENTAGE
60 sec launching 12.02.14 - 3 sec blue white
60 sec launching 12.02.14 - 3 sec white
60 sec launching 12.02.14 - 3 sec white Alt
60 sec launching 12.02.14 - 6 sec blue white
60 sec launching 12.02.14 - 6 sec blue white alt
60 sec launching 12.02.14 - 6 sec white
60 sec - are you prepared - 6 sec white
60 sec - are you prepared - 3 sec white
60 sec - are you prepared - 3 sec blue
60 sec - are you prepared - 6 sec blue
60 sec - LOGOS - 6 sec White
Number of collected files: 18
Size of collected files: 252 MB
Collected source files:
/Users/jasonarber/Desktop/Campaign Overview Films/Campaign Overview 30sec Draft v1.mov
/Users/jasonarber/Desktop/Campaign Overview Films/Campaign Overview 60sec Draft v1a.mov
/Users/jasonarber/Desktop/FOREX/Artwork/Forex-Abstract-New1.ai
/Users/jasonarber/Desktop/FOREX/Artwork/Forex-Abstract-New2.ai
/Users/jasonarber/Desktop/FOREX/Artwork/Forex-BasicGraph.ai
/Users/jasonarber/Desktop/FOREX/Artwork/Percentage.ai
/Users/jasonarber/Desktop/FPOTW-JA.psd
/Users/jasonarber/Desktop/Logos 2/FOREX_LOGO_NO_TAG_RGB.EPS
/Users/jasonarber/Desktop/Logos 2/ManCity Crest sky blue.eps
/Users/jasonarber/Desktop/PENT.ai
/Users/jasonarber/Desktop/PERCENTAGE.ai
/Users/jasonarber/Desktop/SuitFacts.mov
/Volumes/STORE N GO/JA/ARTWORK/Colour Swatches.psd
/Volumes/STORE N GO/JA/ARTWORK/Forex-Abstract-01-CS5.ai
/Volumes/STORE N GO/JA/ARTWORK/Forex-Abstract-03-CS5.ai
/Volumes/STORE N GO/JA/ARTWORK/Forex-Volume-CS5.ai
/Volumes/STORE N GO/JA/Movies/Files For Jason/Execute - Fitness ref Jason.mov
/Volumes/Wyld Drive/MP3/AmpLive/Rainydayz Remixes/04 Weird Fishez.mp3
Rendering plug-ins:
Classic 3D
Effects used: 13
Effect: Audio Waveform
Effect: Curves
Effect: Fast Blur
Effect: Fill
Effect: Levels
Effect: Mir
Effect: Noise
Effect: Numbers
External dependencies:
Font family: ‘Knockout’, Font style: ‘HTF48-Featherweight’
Effect: Optical Flares
Effect: Particular
Effect: Radial Wipe
Effect: Slider Control
Effect: Tint
Layer: Text Layer
External dependencies:
Font family: “Knockout”, Font style: “HTF48-Featherweight”
Font family: “Knockout”, Font style: “HTF68-FullFeatherwt”
Font family: “Knockout”, Font style: “HTF72-FullCruiserwt” -
Keynote 09 opens some files, not others
I'm running Snow Leopard and iWork 09. I have several very important Keynote presentations that I dearly need to access. While Keynote will open some of the past files, it will not open several of these critical files. Any suggestions would be appreciated.
Hey Apple, Spotlight not only fails to work as
advertised, it's essentially useless. A search tool
that cannot be relied on is a search tool that is not
worth using at all. Your failure to make this vaunted
"feature" work by version 10.4.3 is really a black
mark on the Apple brand.
Here's my experience:
1. Upgraded from 10.3.9 to 10.4.3. Process was long
but went smoothly. New OS is snappier and has several
welcome new features.
2. Experimented with Spotlight. It quickly found text
buried in Word and other documents. Stellar.
3. Spotlight did not find text inside Wordperfect
documents. This did not surprise me because I don't
have Wordperfect on my system, so these files were
unreadable.
4. Converted the Wordperfect files to Word, saved
them, opened them and closed them. Spotlight still
did not find text in these files.
5. Created a new Word file. Spotlight did not find
EITHER the name of the file or the text inside it.
6. Used Onyx to re-index Spotlight. No improvement.
Turned computer off and back on a couple times. Still
no improvement.
Note: I have not made any changed to the Privacy
setting or anything else, other than to re-order the
display of Spotlight's results. Do not have any
third-party system software or utilities besides
Onyx, and this problem occurred before I even
installed Onyx. Also have never fiddled with the
command line.
Any tips? And any idea when Apple will get its act
together? This is a real shame. Apple should be
embarrassed.
-- Disappointed Mac user.
Update:
I re-indexed Spotlight by marking then unmarking my Macintosh HD as Private in Spotlight Preferences. Spotlight then found the name and contents of the Word file I created after upgrading to Tiger. Who knows why it didn't find this file the first time I re-indexed.
Spotlight continued to ignore all content of the files that I converted from Wordperfect to Word -- until I opened each file and saved them using the "save as" command. Then Spotlight worked. -
Spotlight finds some files, not others
Hey Apple, Spotlight not only fails to work as advertised, it's essentially useless. A search tool that cannot be relied on is a search tool that is not worth using at all. Your failure to make this vaunted "feature" work by version 10.4.3 is really a black mark on the Apple brand.
Here's my experience:
1. Upgraded from 10.3.9 to 10.4.3. Process was long but went smoothly. New OS is snappier and has several welcome new features.
2. Experimented with Spotlight. It quickly found text buried in Word and other documents. Stellar.
3. Spotlight did not find text inside Wordperfect documents. This did not surprise me because I don't have Wordperfect on my system, so these files were unreadable.
4. Converted the Wordperfect files to Word, saved them, opened them and closed them. Spotlight still did not find text in these files.
5. Created a new Word file. Spotlight did not find EITHER the name of the file or the text inside it.
6. Used Onyx to re-index Spotlight. No improvement. Turned computer off and back on a couple times. Still no improvement.
Note: I have not made any changed to the Privacy setting or anything else, other than to re-order the display of Spotlight's results. Do not have any third-party system software or utilities besides Onyx, and this problem occurred before I even installed Onyx. Also have never fiddled with the command line.
Any tips? And any idea when Apple will get its act together? This is a real shame. Apple should be embarrassed.
-- Disappointed Mac user.Hey Apple, Spotlight not only fails to work as
advertised, it's essentially useless. A search tool
that cannot be relied on is a search tool that is not
worth using at all. Your failure to make this vaunted
"feature" work by version 10.4.3 is really a black
mark on the Apple brand.
Here's my experience:
1. Upgraded from 10.3.9 to 10.4.3. Process was long
but went smoothly. New OS is snappier and has several
welcome new features.
2. Experimented with Spotlight. It quickly found text
buried in Word and other documents. Stellar.
3. Spotlight did not find text inside Wordperfect
documents. This did not surprise me because I don't
have Wordperfect on my system, so these files were
unreadable.
4. Converted the Wordperfect files to Word, saved
them, opened them and closed them. Spotlight still
did not find text in these files.
5. Created a new Word file. Spotlight did not find
EITHER the name of the file or the text inside it.
6. Used Onyx to re-index Spotlight. No improvement.
Turned computer off and back on a couple times. Still
no improvement.
Note: I have not made any changed to the Privacy
setting or anything else, other than to re-order the
display of Spotlight's results. Do not have any
third-party system software or utilities besides
Onyx, and this problem occurred before I even
installed Onyx. Also have never fiddled with the
command line.
Any tips? And any idea when Apple will get its act
together? This is a real shame. Apple should be
embarrassed.
-- Disappointed Mac user.
Update:
I re-indexed Spotlight by marking then unmarking my Macintosh HD as Private in Spotlight Preferences. Spotlight then found the name and contents of the Word file I created after upgrading to Tiger. Who knows why it didn't find this file the first time I re-indexed.
Spotlight continued to ignore all content of the files that I converted from Wordperfect to Word -- until I opened each file and saved them using the "save as" command. Then Spotlight worked. -
OCR works without issue on some files, not others?
Acrobat 10.1.1
While working with converting presentation slides to OCR and exporting them I am only able to get some PDFs to properly OCR. I am using the same process though it seems it simply won't take on some while it does others.
Tools > Recognize Text > In this file > (Default settings) Ok
and yet I get different outcomes.
Is it possible that background colors/type color/font etc. are conflicting with the OCR process? Again keep in mind these are presentation slides that have been converted into PDFs that I am attempting to OCR for export into Word.
Thanks.Most of the time you would not be able to OCR such documents because they are not pure graphics. OCR in Acrobat can only be done on pure graphics. If there is else on the page, OCR will not work. A work around is to save the document as a TIFF and then import all the TIFF files produced into a new PDF and run OCR on that. Be careful to use a high enough resolution, the other aspect than can cause OCR to fail (there is a minimum resolution -- 200 or 300 dpi).
-
Stop Dreamweaver loading scripts/CSS files included in a page
Dreamweaver CC 2014.1 (Mac OS X 10.10, Yosemite) has a big BUG... isn't possibile build with it large/complex websites.
If I have a website with large numbers of css files (or scripts), Dreamweaver takes too much time to load/save a page that included them (the wheel turns indefinitely).
Is it possible to stop Dreamweaver from loading scripts and CSS files included in a page while I'm working on it (even temporarily)?
I know that without this function (load external files) Dreamweaver is absolutely useless, but at the moment I haven't still found another IDE tool and I need to work with speed.
ThanksLive View, Code View or Design View?
Have you validated your code to check for errors?
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
You could comment out your links to external scripts and CSS Files.
<!--this is an html comment
-->
To turn off styles in Design View only, go to View > Style Rendering > untick Display Styles. Or consider using a Design-Time Style Sheet.
Dreamweaver Help | Use Design-Time style sheets
To speed things up a bit, try these tips:
1. Edit -> Preferences -> Code Hints -> Disable description tooltips
2. Edit -> Preferences -> Highlighting -> Untick both Live Data Untranslated and Translated
3. Edit -> Preferences -> Sync Settings -> Untick all in sync settings
Nancy O. -
i received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen. i waited for a few minutes to see if it would load - nothing just the lit up screen but nothing loaded - held power button it asked did i really want to turn off - i selected shutdown -turned off and left it off for awhile tried to turn on no noise no screen load. the same lit up screen but nothing loading. please help thx in advance if anyone can offer some suggestions
You can get there from here (booting normally); it just may take you a few steps to do it.
If the disk is almost full and the system won't boot then sometimes it will boot in Safe Mode.
http://support.apple.com/kb/HT1564?viewlocale=en_US
Empty the trash after it boots.
Then for hints on how to free disk/SSD storage see https://discussions.apple.com/thread/5872318?tstart=0
If the Safe Mode boot does not do the trick then you can install OS X on an external hard disk, boot from that, and then delete files. You can also reach the disk via Target Mode. A third option is to take it to an Apple store where they can do a network boot and help you remove some files. -
Why does my script ignore values in variable only some of the time?
Hello,
I'm a beginner at Powershell and am writing a script to gather the deployment details on all Azure Cloud Services attached to a Azure Subscription, including the info for any service that does not have a deployment.
I understand that the way I'm going about this may be wrong and I am NOT looking for any help creating a final script. Some of my script is written specifically so that I can better understand what it's doing (for learning purposes).
What I am looking for is help understand why my current script behaves the way it does.
Here's my current script:
#Create a report that shows the created date and latest deployment date for all
#hosted services (cloud services)deployments in MyAzureSubscription
Select-AzureSubscription MyAzureSubscription
$ServiceNames = Get-azureservice
foreach ($service in $ServiceNames){
$ServiceName = $service | select -ExpandProperty ServiceName
$ServiceDateModified = $service | select -ExpandProperty DateModified
$service |
get-azuredeployment -ErrorAction SilentlyContinue -ErrorVariable NoDeployment |
Select @{Name="ServiceName";Expression={$ServiceName}}, DeploymentName, Status, CreatedTime, LastModifiedTime, @{Name="ServiceDateModified";Expression={$ServiecDateModified}}, @{Name="NoDeployment";Expression={$NoDeployment}} |
Sort-Object -Propert DeploymentName |
export-csv "outputfile.csv" -notypeinformation -append
#Test statements below
#Write-Host "NoDeployment Below:"
#$Service | select ServiceName | Write-Host
#Write-Error $NoDeployment
Write-Host $ServiceName
The output file only contains a list of servicenames and deployment details for services that do have a deployment. None of the services that have no deployments are added/exported to the csv file. However, the "write-host $ServiceName"
writes ALL the service names in the powershell window, regardless of whether there's a deployment or not.
What I don't understand is why the Select @{Name="ServiceName";Expression={$ServiceName}} only outputs the service names of services that have deployments instead of ALL service names regardless of whether they have a deployment or not.
I've already proven that the variable $ServiceName does, at some point, save the ServiceName into the $ServiceName variable by writing it to host on each iteration of the foreach loop. So why is it ignoring some ServiceNames when outputting/exporting
to the csv file?
Thanks!Hi Landshrkk,
The script only outputs the names of the services that have deployments, because the get-azuredeployment cmdlet encounter error and didn't pass the result to select cmdlet, please try the script below:
$output=@()
Select-AzureSubscription MyAzureSubscription
$ServiceNames = Get-azureservice
foreach ($service in $ServiceNames){
$ServiceName = $service | select -ExpandProperty ServiceName
$ServiceDateModified = $service | select -ExpandProperty DateModified
$s=$service |get-azuredeployment -ErrorAction SilentlyContinue -ErrorVariable NoDeployment
$output += New-Object PSObject -Property @{
ServiceName = $ServiceName
DeploymentName = $s.DeploymentName
Status = $s.Status
CreatedTime = $s.CreatedTime
LastModifiedTime = $s.LastModifiedTime
ServiceDateModified = $ServiecDateModified
NoDeployment = $NoDeployment}
$output|Sort-Object -Propert DeploymentName |export-csv "outputfile.csv" -notypeinformation
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Fx:include and fx:script - when is the included fxml file parsed?
I'm curious to know when an included (via fx:include tag) fxml document is parsed and if a script defined in the main fxml document can reference elements from the included document. The example below results in the following error message: +"sun.org.mozilla.javascript.internal.EcmaError: ReferenceError: "loadOrdersButton" is not defined. (<Unknown source>#2) in <Unknown source> at line number 2"+
Example:
Main.fxml
The script fails to find the loadOrdersButton defined in HeaderFields.fxml. (Yes the button's fx:id is set to loadOrdersButton)
<?xml version="1.0" encoding="UTF-8"?>
<BorderPane prefHeight="800.0" prefWidth="1200.0" xmlns:fx="http://javafx.com/fxml">
<top>
<fx:include source="HeaderFields.fxml">
<fx:script><![CDATA[
loadOrdersButton.setVisible( false );
]]></fx:script>
</fx:include>
</top>
<center>
</center>
</BorderPane>
HeaderFields.fxml
<?xml version="1.0" encoding="UTF-8"?>
<AnchorPane xmlns:fx="http://javafx.com/fxml">
<children>
<Pane>
<children>
<Button fx:id="loadOrdersButton" />
</children>
</Pane>
</children>
</AnchorPane>I'm curious to know when an included (via fx:include tag) fxml document is parsed It is parsed as soon as it is encountered. In other words, the include is fully processed before the next element in the including file is processed.
and if a script defined in the main fxml document can reference elements from the included document.It cannot. FXML IDs are considered "private" to the document and its associated controller (or any script code directly defined or referenced by that document). It is not possible to "inject" script code into an include as you appear to be attempting to do here.
However, an include's controller is accessible to the including document. So if the controller for HeaderFields.fxml exposed a "loadOrdersButton" property via a getLoadOrdersButton() method, you could do something like this:
<fx:include fx:id="headerFields" source="HeaderFields.fxml"/>
<fx:script><![CDATA[
headerFieldsController.loadOrdersButton.setVisible(false);
]]></fx:script>Of course, another option is to simply include the script in the HeaderFields.fxml file itself:
<Button fx:id="loadOrdersButton" />
<fx:script><![CDATA[
loadOrdersButton.setVisible(false);
]]></fx:script>But I'm assuming there's some reason you don't want to do that. -
Some PDF files and other emails do not display the whole page. Is there a way to change that?
If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?
Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received! -
Amber update not as same as others, maybe some fil...
I download amber update today through wifi on my Lumia 620, but settings are not as this video does help me.... Maybe some file missing... Please help me...
http://m.youtube.com/watch?v=PXAMWNsZwzoUse the QR Codes HERE and update all your System Applications (especially extras+info and touch+display) .. Then check again .
-
On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?
A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared. -
I accidentally deleted some files from iCloud, how do I recover the files if I do not have other backup or in time machine
You don't.
Maybe you are looking for
-
I have an IMac with an external hard drive set up as a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a wa
-
Jsp bean property method dilemma
Hi all, I'm just starting using bean and trying to convert old jsp in MVC model using beans. I expose the problem: a simple internal search engine ask with a form to enter the some parameter. I want to use this parameter to compose my query to the db
-
I restored someone else's backup to my phone
I ve installed ios7 but forgot to backup my Iphone before installing ios7. I didnt know that until i have restored to someone else's backup, I bought this computer from someone, and apparently this guy had his phone backed up on my computer. When i i
-
Can holdability of a cursor be changed?
Hi, Once you have opened a cursor with desired holdability, is it possible to change it later using jdbc? thanks, Mamta
-
Font mapping in Oracle 6i Report Server
Dear All, I am creating a report which is required to display the Palatino Linotype font in the PDF format by using the Report Builder in MS Windows XP. After deploy to Oracle 6i report server which is running in Solaris, I was facing a problem to ge