Rule based on background colour?
Hi,
The rules feature is pretty simplistic so I think I already know the answer but worth asking anyway:
is it possible to have a rule that acts on the background colour of an email?
For example emails that need an action I want set to Green and emails who's tasks are completed I want set to Red. I then want smart folders that collate all green and all red emails into their respective folders.
I cant see "colour" exists as a Rule option but has anyone else figured out a way to make this (or a similar idea) work?
Thanks in advance.
While you could set the label color using applescript, I don't see a way to select the label color in a smart mailbox. You may want to take a look at [Mail Tags|http://www.indev.ca/MailTags.html].
Similar Messages
-
Is it possible to have the background colour of a field change based on the entry?
I previously obtained help from a user here to create a script that autopopulates a field based on options selected in two sets of radio buttons:
var consequence = this.getField("Consequence").valueAsString;
var likelihood = this.getField("Likelihood").valueAsString;
if (consequence=="Insignificant" && likelihood=="Rare") event.value = "Low";
else if (consequence=="Insignificant" && likelihood=="Unlikely") event.value = "Low";
else if (consequence=="Insignificant" && likelihood=="Moderate") event.value = "Low";
else if (consequence=="Insignificant" && likelihood=="Likely") event.value = "Low";
else if (consequence=="Insignificant" && likelihood=="Almost Certain") event.value = "Moderate";
else if (consequence=="Minor" && likelihood=="Rare") event.value = "Low";
else if (consequence=="Minor" && likelihood=="Unlikely") event.value = "Low";
else if (consequence=="Minor" && likelihood=="Moderate") event.value = "Moderate";
else if (consequence=="Minor" && likelihood=="Likely") event.value = "Moderate";
else if (consequence=="Minor" && likelihood=="Almost Certain") event.value = "High";
else if (consequence=="Moderate" && likelihood=="Rare") event.value = "Low";
else if (consequence=="Moderate" && likelihood=="Unlikely") event.value = "Moderate";
else if (consequence=="Moderate" && likelihood=="Moderate") event.value = "High";
else if (consequence=="Moderate" && likelihood=="Likely") event.value = "High";
else if (consequence=="Moderate" && likelihood=="Almost Certain") event.value = "Critical";
else if (consequence=="Major" && likelihood=="Rare") event.value = "Low";
else if (consequence=="Major" && likelihood=="Unlikely") event.value = "Moderate";
else if (consequence=="Major" && likelihood=="Moderate") event.value = "High";
else if (consequence=="Major" && likelihood=="Likely") event.value = "Critical";
else if (consequence=="Major" && likelihood=="Almost Certain") event.value = "Extreme";
else if (consequence=="Catastrophic" && likelihood=="Rare") event.value = "Moderate";
else if (consequence=="Catastrophic" && likelihood=="Unlikely") event.value = "High";
else if (consequence=="Catastrophic" && likelihood=="Moderate") event.value = "Critical";
else if (consequence=="Catastrophic" && likelihood=="Likely") event.value = "Extreme";
else if (consequence=="Catastrophic" && likelihood=="Almost Certain") event.value = "Extreme";
// etc.
else event.value = "";
I'm wondering if its possible to have the colour of the field that uses the above script, change based on the entry. E.g. If the answer is Low; make the background colour Green; if its Moderate, make it orange etc.?
I know its a big ask but thought I would check.
Thanks in advance.One approach would be to have access to a Mac that can run the classic environment or has a pre OS X native installation. These should be able to read the files for dates of creation/modification. There is also SheepShaver that runs on OS X machines.
https://www.macupdate.com/app/mac/20615/sheepshaver
http://en.wikipedia.org/wiki/Classic_Environment
http://www.everymac.com/systems/by_capability/macs-that-support-macos-9-classic. html
https://discussions.apple.com/message/22597899#22597899 -
Improving performace for a Rule Based Optimizer DB
Hi,
I am looking for information on improving the current performance of an ancient 35GB Oracle 7.3.4 using RULE based optimizer mode. It is using 160 MB SGA and the physical memory on the system is 512MB RAM.
As of now, all the major tasks which take time, are run after peak hours so that the 130 user sessions are not affected significantly.
But recently am told some procedures take too long to execute ( procedure has to do with truncating tables and re-populating data into it ) and I do see 54% of the pie chart for WAITS are for "sequential reads" followed by "scattered reads" of 36%. There are a couple of large tables of around 4GB in this DB.
Autotrace doesn't help me much in terms of getting an explain plan of slow queries since COST option doesnt show up and am trying to find ways of improving the performance of DB in general.
Apart from the "redo log space requests" which I run into frequently (which btw is something I am trying to resolve ..thanks to some of you) I dont see much info on exactly how to proceed.
Is there any info that I can look towards in terms of improving performance on this rule based optimizer DB ? Or is identifying the top sql's in terms of buffer gets the only way to tune ?
Thank you for any suggestions provided.Thanks Hemant.
This is for a 15 minute internal under moderate load early this morning.
Statistic Total Per Transact Per Logon Per Second
CR blocks created 275 .95 5.19 .29
Current blocks converted fo 10 .03 .19 .01
DBWR buffers scanned 74600 258.13 1407.55 78.44
DBWR free buffers found 74251 256.92 1400.96 78.08
DBWR lru scans 607 2.1 11.45 .64
DBWR make free requests 607 2.1 11.45 .64
DBWR summed scan depth 74600 258.13 1407.55 78.44
DBWR timeouts 273 .94 5.15 .29
OS Integral shared text siz 1362952204 4716097.59 25716079.32 1433177.92
OS Integral unshared data s 308759380 1068371.56 5825648.68 324668.12
OS Involuntary context swit 310493 1074.37 5858.36 326.49
OS Maximum resident set siz 339968 1176.36 6414.49 357.48
OS Page faults 3434 11.88 64.79 3.61
OS Page reclaims 6272 21.7 118.34 6.6
OS System time used 19157 66.29 361.45 20.14
OS User time used 195036 674.87 3679.92 205.09
OS Voluntary context switch 21586 74.69 407.28 22.7
SQL*Net roundtrips to/from 16250 56.23 306.6 17.09
SQL*Net roundtrips to/from 424 1.47 8 .45
background timeouts 646 2.24 12.19 .68
bytes received via SQL*Net 814224 2817.38 15362.72 856.18
bytes received via SQL*Net 24470 84.67 461.7 25.73
bytes sent via SQL*Net to c 832836 2881.79 15713.89 875.75
bytes sent via SQL*Net to d 42713 147.8 805.91 44.91
calls to get snapshot scn: 17103 59.18 322.7 17.98
calls to kcmgas 381 1.32 7.19 .4
calls to kcmgcs 228 .79 4.3 .24
calls to kcmgrs 20845 72.13 393.3 21.92
cleanouts and rollbacks - c 86 .3 1.62 .09
cleanouts only - consistent 40 .14 .75 .04
cluster key scan block gets 1051 3.64 19.83 1.11
cluster key scans 376 1.3 7.09 .4
commit cleanout failures: c 18 .06 .34 .02
commit cleanout number succ 2406 8.33 45.4 2.53
consistent changes 588 2.03 11.09 .62
consistent gets 929408 3215.94 17536 977.3
cursor authentications 1746 6.04 32.94 1.84
data blocks consistent read 588 2.03 11.09 .62
db block changes 20613 71.33 388.92 21.68
db block gets 40646 140.64 766.91 42.74
deferred (CURRENT) block cl 668 2.31 12.6 .7
dirty buffers inspected 3 .01 .06 0
enqueue conversions 424 1.47 8 .45
enqueue releases 1981 6.85 37.38 2.08
enqueue requests 1977 6.84 37.3 2.08
execute count 20691 71.6 390.4 21.76
free buffer inspected 2264 7.83 42.72 2.38
free buffer requested 490899 1698.61 9262.25 516.19
immediate (CR) block cleano 126 .44 2.38 .13
immediate (CURRENT) block c 658 2.28 12.42 .69
logons cumulative 53 .18 1 .06
logons current 1 0 .02 0
messages received 963 3.33 18.17 1.01
messages sent 963 3.33 18.17 1.01
no work - consistent read g 905734 3134.03 17089.32 952.4
opened cursors cumulative 2701 9.35 50.96 2.84
opened cursors current 147 .51 2.77 .15
parse count 2733 9.46 51.57 2.87
physical reads 490258 1696.39 9250.15 515.52
physical writes 2265 7.84 42.74 2.38
recursive calls 37296 129.05 703.7 39.22
redo blocks written 5222 18.07 98.53 5.49
redo entries 10575 36.59 199.53 11.12
redo size 2498156 8644.14 47135.02 2626.87
redo small copies 10575 36.59 199.53 11.12
redo synch writes 238 .82 4.49 .25
redo wastage 104974 363.23 1980.64 110.38
redo writes 422 1.46 7.96 .44
rollback changes - undo rec 1 0 .02 0
rollbacks only - consistent 200 .69 3.77 .21
session logical reads 969453 3354.51 18291.57 1019.4
session pga memory 35597936 123176.25 671659.17 37432.11
session pga memory max 35579576 123112.72 671312.75 37412.8
session uga memory 2729196 9443.58 51494.26 2869.82
session uga memory max 20580712 71213.54 388315.32 21641.13
sorts (memory) 1091 3.78 20.58 1.15
sorts (rows) 12249 42.38 231.11 12.88
table fetch by rowid 57246 198.08 1080.11 60.2
table fetch continued row 111 .38 2.09 .12
table scan blocks gotten 763421 2641.6 14404.17 802.76
table scan rows gotten 13740187 47543.9 259248.81 14448.15
table scans (long tables) 902 3.12 17.02 .95
table scans (short tables) 4614 15.97 87.06 4.85
total number commit cleanou 2489 8.61 46.96 2.62
transaction rollbacks 1 0 .02 0
user calls 15266 52.82 288.04 16.05
user commits 289 1 5.45 .3
user rollbacks 23 .08 .43 .02
write requests 331 1.15 6.25 .35Wait Events :
Event Name Count Total Time Avg Time
SQL*Net break/reset to client 7 0 0
SQL*Net message from client 16383 0 0
SQL*Net message from dblink 424 0 0
SQL*Net message to client 16380 0 0
SQL*Net message to dblink 424 0 0
SQL*Net more data from client 1 0 0
SQL*Net more data to client 24 0 0
buffer busy waits 169 0 0
control file sequential read 55 0 0
db file scattered read 74788 0 0
db file sequential read 176241 0 0
latch free 6134 0 0
log file sync 225 0 0
rdbms ipc message 10 0 0
write complete waits 4 0 0I did enable the timed_stats for the session but dont know why the times are 0's. Since I cant bounce the instance until weekend, cant enable the parameter in init.ora as well. -
Missing background colour in image rollover in IE
Just noticed I have a missing image background colour on a
rollover link - it's fine in firefox and safari, but awol in IE(6).
link
here
The CSS looks like :
a:link img {
padding: 5px;
border: 1px solid #999999;
a:visited img {
padding: 5px;
border: 1px solid #999999;
a:active img {
padding: 5px;
border: 1px solid #999999;
a:hover img {
padding: 5px;
border: 1px solid #8C595A;
background-color:#CD8B8D;
Any ideas?Hi Everyone,
Great thread. I thought you guys might find this interesting.
There is an IE Img Hover Bug that most people run into with
border color change on hover that answers some of the questions
here.
Lain71, at the end I included code you can use with a thick
border that should do what you want and will work cross-browser.
I thought it might be beneficial to anyone else searching the
forum for IE img hover issues to offer some additional detail.
Most people first run into trouble when they have an image
link and try to handle border color change like you would on a text
link. Unfortunately, this is incorrect CSS for doing this but it
works in IE6 :-/ It doesn't .. as it shouldn't ..work in the Gecko
browsers.
a.blah{
border: 3px;
border-color: #CC0099;
border-style:solid;
a.blah:hover{
border-color: #33FFFF;
<a href="#" class="blah"><img src="mypic.gif"
width="100" height="100"
border="0" /></a>
In IE6, the border changes color on hover. Also, note that IE
is actually rendering the code incorrectly by stretching the border
around the image inside the link element. So it achieves the
desired effect....until...
Testing the page in FF or NN is where the trouble starts, as
you notice the border no longer surrounds the image.
FF and NN render that code correctly by applying the border
to the link element only.
By doing so, the height of the border is equal to text line
height ..as Joe mentioned..which is usually not the height of the
image.
This same effect happens with background color and background
images when applied to a:hover.
So, now to make it work in FF and NN you use the correct CSS
to apply the border to the image inside the link, similar to
Lain71's code:
a.blah img{
border: 3px;
border-color: #CC0099;
border-style:solid;
a.blah:hover img{
border-color: #33FFFF;
<a href="#" class="blah">test<img src="mypic.gif"
width="100" height="100"
border="0" /></a>
Now it works in FF and NN beautifully, but...
Now it doesn't work in IE ! There's no hover effect.The
border doesn't change color.
And there's the "bug."
*********The bug:
In IE, you cannot apply a hover rule to an image link without
first
declaring a hover rule for that link. (Go figure!!!!!!).
This works nicely, I've found.
a.blah img{
border: 3px;
border-color: #CC0099;
border-style:solid;
a.blah:hover{
background-color:transparent;}
a.blah:hover img{
border-color: #33FFFF;
<a href="#" class="blah">test<img src="mypic.gif"
width="100" height="100"
border="0" /></a>
Now it works in IE, NN and FF.
So,
a.blah:hover {background-color:transparent;}
takes care of IE's need to apply a hover rule to the link
before applying a hover rule to the image link without changing the
look of things..
Take care,
Tim -
Chanage background colour of adjacent column in xMII 11.5
Hi All,
Is it possible to change background color of adjacent column based on values.
e. g.
col1 col2 col3 col4 col5 col6
0 A 0 A 0 A
1 B 1 B 1 B
0 C 0 C 0 C
1 D 1 D 1 D
0 E 0 E 0 E
is it possible to set background colour of col2 based on value of col1.
col2 red if col1 value is 0 and col2 green if col1 value is 1
Regards,
Sachin
Edited by: sachinjadhavar on Jul 20, 2011 1:10 PM
Edited by: sachinjadhavar on Jul 20, 2011 1:11 PMHi Sachin,
I hope the columns are of iGrid. You can do it by writing iGrid methods.
For all rows, get the cell value using:
document.iGrid.getGridObject().getCellValue(ROWNUMBER,COLNUMBER)
Write the logic of color and apply the color to specific column using
document.iGrid.getGridObject().setCellBackgroundColor(ROWNUMBER,COLNUMBER,COLOR)
Hope this solves your problem.
Best Regards,
Kedar -
How to change Background Colour in IC Web Client !
Hi,
How to change Background Colour in IC Web Client ?
The desired option is to have a choice of colours based on user. Is it possible?
Regards.Hi,
May I know if this is the right place to post questions on IC Web Client?
So far I have not succeeded in getting responses to any of my questions.
Is there any other forum where i can post questions related to this topic.
Regards. -
ITunes 11 how can the window background colour be changed from white to black in Grid View?
How do I change the window background colour ,in Grid View, from the new, default, white back to the good old, more easy on the eye, black?
Apple did this to us in iPhoto some time ago and had to add a preference for shades of grey other than white. Why didn't Apple learn from this mistake?It is good to know I am not alone. The first thing I did after downloading iTunes 11 was go into preferences to change the background color. But alas, the option for a dark background is gone. I also was kind of disappointed in the lack of ability to resize the artwork, but not to the extent of some other commenters here.
I will say this though. I love the way the albums expand with custom colored backgrounds based on each album's artwork colors. This looks fantastic. Still it would be nice to accomodate those who prefer to use a dark background for the overall application's theme.
So, Apple, I join with my fellow users in requesting the return of resizable artwork, and the option for at least a dark (or an even further customizable) background color for the overall theme of the application. Thanks!
Godspeed,
Nuckels -
I've applied a background colour to the body div using
external CSS so that it will fill the margins around my centred
main wrapper div. However, the background colour does not seem to
be applied, whether viewed in Dreamweaver, IE7, Firefox or Safari.
I've used the same code to put a background colour on the main
wrapper div and this worked fine. Strangely enough, if I apply the
same code as an embedded rule then this works fine!
I've selected web colours only.
Any ideas why the code doesn't work?Remove the 'hash'# symbol before the body.
#body {
text-align:center;
font:small/1.2 Arial, Helvetica, sans-serif;
margin: 0;
padding: 0;
background-color:#ccffff;
RSW14 wrote:
> I've applied a background colour to the body div using
external CSS so that it
> will fill the margins around my centred main wrapper
div. However, the
> background colour does not seem to be applied, whether
viewed in Dreamweaver,
> IE7, Firefox or Safari. I've used the same code to put a
background colour on
> the main wrapper div and this worked fine. Strangely
enough, if I apply the
> same code as an embedded rule then this works fine!
>
> I've selected web colours only.
>
> Any ideas why the code doesn't work?
>
> #body {
> text-align:center;
> font:small/1.2 Arial, Helvetica, sans-serif;
> margin: 0;
> padding: 0;
> background-color:#ccffff;
> }
> #wrapper {
> position:relative;
> margin-left:auto;
> margin-right:auto;
> text-align:left;
> width:760px;
> border:5px;
> border-color:#796460;
> border-style: solid;
> background-color:#ffffcd;
> }
> -
HI,
IS IT POSSIBLE TO SET DIFFERENT BACKGROUND COLOUR OF THE TEXT ITEM OF A DATA BLOCK ACCORDING TO THE VALUE INSIDE THE ITEM?
Example:
BLOCK WITH 5 RECORDS, FIRST RECORDS'ITEMS BACKGROUND MUST BE RED (CAUSE VALUE IS <0), 2ND AND 3RD WHITE (VALUE >0), THE OTHERS RED.
THANKSHi,
In Forms 4.5 - Use the DISPLAY_ITEM built in on the POST_QUERY trigger to set records to certain colours based on their values.
In Forms 6.0, 6i - Use the new SET_ITEM_INSTANCE_PROPERTY.
Have a look at their use in the forms help.
Cheers
Oli -
Dear Community,
I've been trying to rebuild one of my Analayis Office Workbooks within Design Studio.
Attempting this, I've come across some questions I hope to find answers to, with your help:
1. How can I include images, in a local application? I've inserted the "image" component, but I can't asign an Image file to this.
2. How can I change the background colour of a textbox-component?
3. I have a chart in my Dashboard. The bars I want to be labled. But defining, that data labels should be placed outside the bars, there is a mixed result. Some bars show the labels outside, some others display the lable somewhere within the bar.
Who can help with those questions? Thanks a lot.
Kind regards
Sarah1. How can I include images, in a local application? I've inserted the "image" component, but I can't asign an Image file to this.
When working in Local Mode, go to Application -> Open Repository Folder -> and open the folder that your BI Application is named. Place your image file there. Go back to your Design Studio Image component and set the src to the name of that image file. It should show up. This gets a little more involved when working on the BI Platform or NetWeaver Platform, as you'll want to publish the Image to a public folder on the CMS somewhere (for BI Platform), or the MIME Repository (for NetWeaver Platform). But the concept is similar in that you have to know where to place the files once you are at that point. Also as an approach that should work without any need to publish the image to the platform (as it's a little tedious), please read this document:
How to embed images inside of a Design Studio App without uploading to server.
Or, if you do not want to go through the base-64 encoding, consider the addon I blogged about here:
Design Studio 1.2 SDK - An Image Component free of MIME Repository worries
The deployable version can be downloaded from this blog:
Design Studio 1.2/1.3 SDK - Design Studio Utility Pack
2. How can I change the background colour of a textbox-component?
You will have to write a CSS rule like this:
.testbox {
background : #009966;
Then assign 'testbox' as the CSS Class to the text input box.
3. I have a chart in my Dashboard. The bars I want to be labled. But defining, that data labels should be placed outside the bars, there is a mixed result. Some bars show the labels outside, some others display the lable somewhere within the bar.
Not sure how much control the delivered chart components would give you here. Maybe one of the third party addons listed in this post could help?
List of Design Studio SDK Components -
Cannot change datagrid item background colour dynamically
Hello, I am trying to change the background colour of a data
grid item dynamically.
I am using a component for each item with the item_renderer
function
then in the component this is the line i am having trouble
with
<mx:Canvas width="100%" height="100%" id="item_bg"
backgroundColor="{data.status_colour}">
data.status_colour is definatly set and has a hex value,
#FF99CC for example
i tried
<mx:Canvas width="100%" height="100%" id="item_bg"
creationComplete="item_bg.setStyle("backgroundColour","{data.status_colour}")">
it did put colours on the but they were all in the wrong
place, so a completed item should be green but it is coming up with
red (failed)
any ideas??
thanksYou will need to use a custom calculation script, something like:
// Custom calculation script
(function () {
// Get the field values, as numbers
var v1 = +getField("Severity1").value;
var v2 = +getField("Likelihood1").value;
// Calculate the product
var prod = v1 * v2;
// Set this field's value;
event.value = prod;
// Default background color
var bg = color.white;
// Define the orange color
color.orange = ["RGB", 1, .33, 0];
// Determine background color based on the product
if (prod >= 1 && prod <=5) {
bg = color.green;
} else if (prod > 5 && prod <= 10) {
bg = color.orange;
} else if (prod > 10) {
bg = color.red;
// Set this field's background color
event.target.fillColor = bg; -
Global Background Colour with individual Overide Text Boxes
Hi I am looking to apply a global background colour using the details properties.
However I have individual text boxes that have their own background colour based on expressions that I want to overide the global details properites.
So I set up the global one with this expression
IIF(Fields!Number_of_Defendants.Value = 1 ,"Yellow","Transparent")
for the individual text box I used a nested IIF
=IIF(Fields!Bill_Rate.Value = 115,"Red",IIF(Fields!Number_of_Defendants.Value = 1 ,"Yellow","Transparent"))
This works but I'm wondering if their is a easier way so I don't have to have the 2nd clause.
RegardsHi aivoryuk,
As per my understanding, I think the expression you post is simple way. If you don’t want to use IIF function, I suggest we can try to use switch function as below to achieve the similar requirement:
=Switch(Fields!Bill_Rate.Value = 115,"Red",Fields!Number_of_Defendants.Value = 1 ,"Yellow")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
JInternalFrame background colours.
Hi.
We have a large and complex Swing application, too complex to really demonstrate any relevant code, but...
Running under Java1.2, when a JInternalFrame opened the background colour was set as desired. Now under Java1.3 or 1.4, the background is always the standard Grey. I have played around with setOpaque() etc but nothing has any effect on these frames.
Any ideas as to what could be happening?Hi,
I too am experiencing the very same problem. Did you manage to work it out? The application I'm working on, displays the background color of JInternalFrame based on the "Desktop.background" property of UIManager when compiled using JDK 1.3. But with JDK 1.4.1 and JDK1.4.2 it shows the background of JInternalFrames as grey.
Any advice ??
Thanks in advance. -
Rule based ATP is not working for Components
Hi All,
Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
Issue: Product availiabilty is working for components but rules based substituion is working, mean Rules are not getting determind for components.
Settings:
- Header doesnot exist in APO and compnents do exist in APO
- Availability check is not enabled for header item category and enabled for Item category for components
- Rules have been created for Components in APO
- Rule base ATP is activated in Check instructions
We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
Thanks for help.
Regards,
JagadeeshHi Jagdeesh,
If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
Please include header material in you integration models for material, SO and ATP check as well.
For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
Regards,
Bipin -
Recently I have been working on docs without the distraction of having to see my desktop around my page file by using the full screen view in pages. I do find the contrast to an all black screen too harsh though and it makes my eyes more tired than seeing the clutter of my desktop around the page. Is there any way I can change the background colour?
Any help much appreciated!When you are in Full screen mode move the cursor up to the top to show the Format bar. Then look to the far right. There you'll see Background and a rectangle. Click on the rectangle and change the colour.
For information on Pages download the Pages User Guide from your Pages Help menu.
Maybe you are looking for
-
Hi ALL I'm trying to create a Jtextfield but i also want to have an array on the Textfield, is their a simple way of doing this. I have tried but failed so can anyone help please. wen i try i get nopointerexception (frustrating)
-
Event Linkage Getting Disabled In PO release Workflows : Plz help
hi all i am working on PO Release Workflow my problem is when I create PO and save it , the event linkage in SWETYPV gets disabled plz help me its urgent. regards ravish
-
Provisional Entries to be posted through FI
Hi, Client need to post a provisional expenses entry in System through FI. Which should not be part of posting (Leading Ledger). However at the time of reporting (MIS), the provisional Entry should be reflected. At the end of the year, all these prov
-
Adjusting playback speed of clip selection
I have a 4 minute portion of video that I want to give a "fast forward" look to. It's boring if viewed in real time. How is this done? Also, why can't I find the search feature to see if anyone has already asked this? Thanks.
-
Music cuts in and out using Airport Express
This has been happening for the longest time, and driving me crazy and I just haven't gotten around to doing anything about it other than get ****** at Apple..which doesn't really help...maybe it's not even Apple's fault! Basically, I stream music to