Rule returns no agent and workitem sent to all users

Hi,
In my workflow I have defined a rule fot a workitem. The task is general task. When this rule does not return a possible agent system is sending workitem to all the users in the system.
I tried to make the task general forwarding not allowed, then the workitem is not triggered saying no agent assigned though my rule results in an agent.
I can give a user of workflow administrator or dummy user in rule - function module. But what is the standard way of solving this issue. I was expecting the workflow to go into error mode when my rule - function module returns no agent instead its going to the inbox of all users in the system.
Please advise.
Best Regards,
Aleem Mohiuddin.

In PFAC ubder Rule definition tab...
You have a chck box for "Terminate if rule resolution without result"
Please cheeck this and try.

Similar Messages

Help on - IBOT report to be generated once and then sent to many users.

Hello All,
I need some advice to make Ibot efficient. The Ibot at my institution is configured to send a specified report to many users and group. The problem now is the report is generated for every user and then sent to individual user, which takes a lot of time and limits the usage of the resources to other.
Is it possibel that a report which has to be mailed to many users can be generated once and then sent to all the recipients?
Thanking you for time and efforts!
regards
Ankit

OK...
. Do you have the complete application suie of the Audigy SE installed?
2. If so, in Control Panel do you have the Audio Console or Audio Control Panel?
3. If you do, change the settings for Decoder Settings to SPDIF passthrough. (THis is however only of AC-3 content, it doesn't affect other formats) (I am not sure the Audigy SE does have a decoder, if not, you need to change the setting in the AC-3 decoder you use)
4. Then go to Device settings and change the Digital Output sampling rate to 48kHz.
Now if you cannot find Audio Console, then you should download the latest drivers. They specifically state they allow you to change the "SPDIF output Sampling rate", so you should be able to access the option. I believe your problem lies to the fact your SPDIF is configured for 96kHz output and most probably these very old speakers do not support more than 48kHz.
PS: The instruction I posted above, are based on an Audigy 2 ZS setup, so the naming of the settings and access programs could be different on the SE, but nevertheless present.

Pin shortcuts to Taskbar and Start Menu for all users in Windows 7

How can i Pin shortcuts to Taskbar and Start Menu for All Users in Windows 7? Office 2007 Word, Excel and Outlook.

There are a few ways...
You can configure a default profile which will give you the ability to setup the Start Menu as you want it with the items pinned how you like. However, in my experience customizations done to the Taskbar are not maintained in a default profile.
So, one way to get around that would be to create a script and use the "Active Setup" hooks that are built into Windows 7 to achieve the desired results.
If you combine this script...
http://blogs.technet.com/deploymentguys/archive/2009/04/08/pin-items-to-the-start-menu-or-windows-7-taskbar-via-script.aspx
With Active Setup...
http://www.visualbasicscript.com/Active-Setup-Examples-m67461.aspx
You can get the results you want to get...
Pinned items on the Taskbar have two components, one is in the file system and the other is in the registry. You could also use GPO Preferences to add both components to a new profile and therby get similar results. I played around with this method a little and did get it to work also.
Mike N.

Setting visible lines and blank rows for all users

At Item Level for Shopping Cart, Confirmation and Invoice Creation there are settings for Number of Visible Rows and Number of Blank Lines (In Settings/Advanced Settings).
How can this be changed for all users?

Hi
This is a user specific settings to be performed. in SRM 7.0
Please prepare a document and educate the user to do. This is the best solution
Second Solution
In Setting tabs there are two tabs -Basic Setting and Advance Setting
check the webdynpro components and hide this for all users
Regards
G.Ganesh Kumar

Notification sent to all users in a role when some of them responded in first reminde

Hi,
We have a workflow using (voteforresult, standard voting method) sending notifications to users via role. Sends first notification times out sends second one. If some users responded to notification in first email it still sends email to all users second time. Is it not suppose to send email only to
users who hasn't responded.
Example: ROLE01 has USER01, USER02, USER03. Sends email to all three, USER01 responds
after first timeout cancellation is sent to USER02 & USER03 and new notification (second one)
to all three even though USER01 has responded.
thanks,
Sridhar.

Hi Mark,
Thanks very much for response.
Does post notification function also resolves who has responded first time in a role and sends
notification only to others. Like in the example below
Example: ROLE01 has USER01, USER02, USER03. Sends email to all three, USER01 responds,
after first timeout cancellation is sent to USER02 & USER03 and second notification
to all three even though USER01 has responded. What we are looking for is sending
second notification only to USER02, USER03 who has not responded first time.
If there is a standard package or an example which i can look at would of great help.
thanks again,
Sridhar.
See the Workflow Guide on Post Notification Functions:
You can associate a post-notification function with a notification activity. The Workflow Engine executes the post-notification function in response to an update of the notification's state after the notification is delivered. For example, you can specify a post-notification function that executes when the notification recipient forwards or transfers the notification. The post-notification function could perform back-end logic to either validate the legitimacy of the forward/transfer or execute some other supporting logic.
If a notification activity times out, the Workflow Engine runs the post-notification function for the activity in TIMEOUT mode. For a Voting activity, the TIMEOUT mode logic should identify how to tally the votes received up until the timeout.
Hi,
We have a workflow using (voteforresult, standard voting method) sending notifications to users via role. Sends first notification times out sends second one. If some users responded to notification in first email it still sends email to all users second time. Is it not suppose to send email only to
users who hasn't responded.
Example: ROLE01 has USER01, USER02, USER03. Sends email to all three, USER01 responds
after first timeout cancellation is sent to USER02 & USER03 and new notification (second one)
to all three even though USER01 has responded.
thanks,
Sridhar.

How to set up help desk to view and reset password for all users?

Hello,
I am on OIM 11.1.2.1.0 and would like to assign the helpdesk role to a small group of users. I created an organization ORG1 and ORG2. They have the parent organization as "Top". I have a user USR11 and USR12 that belongs to ORG1 and USR2 that belongs to ORG2.
I would like USR11 to be able to see all users in ORG1 and ORG2.
I assign the User Viewer admin role of the Top organization to USR11. After logging in to OIM as USR1, I could see users USR11 and USR12 (same organization) but couldn't see USR2 (different organization).
How can I configure OIM so that user USR11 will be able to see all users?
If I add the User Viewer admin role for both organizations ORG1 and ORG2, then it worked. But I thought with the admin role of the Top organization, this will allow the user USR11 to be able to see all users.
Thanks
Khanh

Hi,
You can achieve everyone can see each other by providing User Viewer admin role to each user under each organization present in ur OIM.
Thats the only way supported in OIM 11g R2. APIs are present for this and you can automate it.
Regards,
J

Can I share color profiles and distiller settings with all user accounts on my imac?

Everyone in our studio is on OSX 10.8.3 with adobe cs6 (not creativecliud version).
I have installed color settings and distiller settings on to the macs under the employees user profile.
All the machines also have a general user profile which anyone can use (setup mainly for use by freelancers).
Is there a space on the macs where i can install the color profiles and distiller settings so that all user accounts have them set up?
At the moment i am having to go into each user account on each machine and do it manually.
Also once i have installed distiller settings in one user account I can't install them on subsequent users.
I have tried placing the files in the
library/applicationsupport/adobe/color/
library/applicationsupport/adobe/adobepdf/settings
and
user/library/applicationsupport/adobe/color/
user/library/applicationsupport/adobe/adobepdf/settings
any help would be much appreciated.
Thanks,Russell

In that case, assuming your wife's XP User Account can access the D: drive as well, you don't have to bother with the To share your music with other accounts on the computer section of that article. That's already taken care of.
Just log into her account and head directly to the To listen to another account's music files section and follow those instructions.
If I had to emphasize one step to keep from stuffing it up, it would be:
4. Deselect the "Copy files to iTunes Music folder when adding to library file" option.
("Deselect" being a fancy way of saying "uncheck")

How can I install and activate extensions for all users

Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
How can I manage extensions and settings for all users in 9.0?
Best regards
Jens

Hi John,
I appreciate your prompt response.
We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
And what are the steps for installing and activating a software under this type of license.

How to track agents and there actions at all levels in a workflow

Hi All,
We have a requiement where in the task description we are
required to give the details of the people who had executed the workflow and the action they have taken.
That is suppose a user approves or rejects a workiitem.
Then the another user who recieves the workitem should know
who the previous users were and what action they had taken
The previous agent who executed the work item can be identified, but we don't know how to identify what action did the previous user has taken.
Thanks and Regards
Shraddha

You can make use of WI_ACTUAL_AGENT container element of the respective task container in order to know who has executed the last workitem.
Thanks
Arghadip

Does anyone know about the privacy policies regarding Notes written on iphone? What about if they are synced with Gmail and get sent to All Mail folder?

I recently found all of my notes (written on my iphone) in my All Mail folder (of my gmail). I think this is because I had selected that my Notes by synced with my Gmail (under Gmail account settings). So I experimented by unsyncing it, then wrote a few more notes, and they stopped appearing in my Gmail All Mail folder. Then, to check, I re-synced it, and wrote some more notes, and they still have not shown up in my All Mail folder. I am freaked out about the unreliability of the systems regarding my personal notes I wrote to myself--both about personal things and to do lists... The fact that it is SO iffy and unclear (Where the notes go and why, where else they may have ended up), is super frustrating to me. What are Apple's privacy policies? Icloud's privacy policies? Gmail's privacy policies? Ergh.
-Frustrated by unreliability and lack of clarity pertaining to personal documents and where they go and where they are stored (even after deletion).

If you go to settings , notes , you can switch we're you want them to go for default. But both your gmail and iCloud have password protection so unless you give someone your password I'm positive nobody can see them. You should also have if you don't already a password on your iPhone to unlock it. Good luck

TS20000168 workflow sent to all users

Hi all,
I need help with the following problem:
I have set up TS20000168 (mm_po_ok) for workflow notification to be sent when the release of a purchase order is effected. For the activity "Release of purchase order effected", I have already set the agent using the expression &_WF_INITIATOR&.
However, when the workflow is triggered, all my users, instead of only the initiator, will get a similar message in their inbox. Why is this so? Is there something I should look out for?
Any form of help is appreciated. Thank you in advance.
Cheers,
Daniel

Hi,
I am using the same workflow it working fine.
1) Check it is general Task, if you developing in one client and testing in another client, then in the testing client check whether it is general Task
2) Check the binding is as below,
Workflow to Task
&RELEASECODE& -
> &RELEASECODE&
&PURCHASEORDER& -
> &_WI_OBJECT_ID&
Task to workflow
&PURCHASEORDER& -
> &_WI_OBJECT_ID&
3) Then Save & activate and test the workflow
4) If still same problem, check any authorization issue.
Regards,
Surjith

GWCHECK was sent to all users

Hi All,
Yesterday I ran a GWCHECK to use the GWMBSIZE utility on the log file.
Options selected were:
Analyze/Fix DB
Contents
Collect Stats
Databases checked were User and Message
I set the results to go to administrator and our helpdesk account.
This morning I came in to find all the users had received the log of their individual mailboxes in their mailboxes.
Thats never happened before. Any ideas on what went wrong or why it happened?
Thanks
Dave

On 14.02.2011 23:36, dwiseman2 wrote:
>
> I set the results to go to administrator and our helpdesk account.
And you activated the checkbox "individual user". BTDTGTT. That checkbox
does exactly that, send the result to each user for that a check is
done. Many people (including myself once in a while), believe it has to
be checked to be able to specify specific additional accounts where the
results shold be sent to. That's not the case.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Get rid of selected tiles in both start and application screens for all users.

Would DISM command for each provisioned tile applied on wim solve this issue?
Thanks!

Hi,
Any updates here?
If we want to remove the build-in APPs, Henrik_Dahl has shared us a good resource to achieve that.
If further help needed, please feel free to ask and we will try out best to help.
Best regards
Michael Shao
TechNet Community Support

Urgent-Renamed Folder in Shared Folders and now Error for all Users?

Hello,
Well I was asked to shorten a name in Shared Folders and so I changed it. Now I get an error if I click on Dashboards or Shared Folders (which is empty now btw ???) or Manage Catalog, its displaying:
Target Path Not Found (/Shared/Customer Operations) Error Code: GZ8VXQ96.
Are we not supposed to create a folder in Shared Folders and then Change the Name?
Please Help. The BI Server Administrator is telling me that everyone else's reports are not available now.
Neally

Kishore, Thank you for your response! I have forwarded it off.
Thing is, there was nothing inside the folder yet...I hadn't moved any reports over so there was nothing referencing it yet.
How can a name of a folder that is for our dept. affect HR, Finance..when they login? Their dashboard preferences were not set to mine. Confused. And to add to this, when I click on Manage Catalog is when I receive the error. So I imagine this is something admin will have to do in Oracle on bi server?
Edited by: Neally on Oct 4, 2010 1:17 PM

WorkItem to WF Administrator if Rule returns Error

Hi,
I have a workflow and it is using a custom rule. My requirement is that, if the rule doesn't return any agent, the workitem has to go to the workflow administrator.
I searched the forum and as per one thread, I did the following steps:
1. In Basic Data of the workflow, I gave WF_Initiator as the agent in Version Dependent Data
2. In my custom rule, I checked the option, Terminate If Rule Resolution Without Result
3. In my FM used in the rule, I throwed one exception nobody_found, if no agent is returned.
Now the issue is that, If the agent is not determined, the workflow goes to an error state and the workitem which should have been created is not created. I unchecked the option in rule to teminate the workflow if no agent is found and tested the workflow. Then, the workitem goes to all users available in the system.
Please guide me sending the workitem to the workflow administrator if no agent is determined from the rule.
Regards,
Jubish

I think you should uncheck the Terminate If Rule Resolution Without Result and you should maintain the agent s the Workflow administrator if there is not agent retrieved in the rule.
Otherwise you can just check Terminate If Rule Resolution Without Result and maintain the Workflow administrator in the workflow level from the Basic data->Version dependent tab. In this way a message will be sent if the workflow goes into error the wflow administrator.
Thanks
Arghadip

Rule returns no agent and workitem sent to all users

Similar Messages

Maybe you are looking for