Run Button inside a movie effect outside a movie

hi
I am working in flash 8 on Windows XP. I am creating a US Map
Project . Under which when i mouse over on a particular US-state
it's size is increased. I did it by using a movie clip. I made such
moive clip's for each state of USA.
Now my requirement is when i mouse over on a particular US
State it must grow its size. and further it must have few spots on
that movie. on which when user clicks a small panel with some
information about that location should be shown.
For this i made a movie for each US State. and set mouse over
event .
on(rollover){
mcName.gotoAndPlay(2);
till here it works fine. But for further spots for locations
i made button in each moive.
Now when i mouseover on movie it gives me desired results.
But when i try to click on the button
inside that movie. It doesnt work.
Please Urgent Help is required .

Inderdeep wrote:
> hi
> I am working in flash 8 on Windows XP. I am creating a
US Map Project . Under
> which when i mouse over on a particular US-state it's
size is increased. I did
> it by using a movie clip. I made such moive clip's for
each state of USA.
> Now my requirement is when i mouse over on a particular
US State it must grow
> its size. and further it must have few spots on that
movie. on which when user
> clicks a small panel with some information about that
location should be shown.
>
> For this i made a movie for each US State. and set mouse
over event .
> on(rollover){
> mcName.gotoAndPlay(2);
> }
> till here it works fine. But for further spots for
locations i made button in
> each moive.
>
> Now when i mouseover on movie it gives me desired
results. But when i try to
> click on the button
> inside that movie. It doesnt work.
>
> Please Urgent Help is required .
The problem with flash is that you can't nest button within
button even tho it is
in a movie clip. You need to use movie clips instead. In that
movie, on first frame
you have stop(); action and the button with roll over action
to jump frame which
has the OVER state content. Than from there you have more
buttons to branch out the
tree.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Problems with button inside draggable movie clip

I am building a click through presentation that has some small text in it. To maintain the design and allow for readability, I have added a zoom feature.
Here is the structure of the movie,
Stage - contains pages movie clip and forward/reverse click buttons for changing pages
pages_mc - contains 24 frames, one page per frame and buttons
There is a button at the _root level that uses a tweener to scale the pages_mc up to 170%. When this is clicked, it allows the pages to be dragged around the screen so you can look at different sections. When you click the button again, it returns the pages back to their original size stops drag.
My problem is, on the pages, there are buttons with links to external sites. Once startDrag has been invoked, I cannot touch the buttons inside the movie clip. Is there a way to make these buttons work?
I need the finished quickly so any assistance is welcome.
Code below
magUp_btn.onRelease = function() {
this._visible = false;
TweenLite.to(pages_mc, .25, {_x:-250, _y:-193, _xscale:170, _yscale:170});
TweenLite.to(magUp_mc, .75, {_alpha:0});
TweenLite.to(magDown_mc, .75, {_alpha:25});
magDown_btn._visible = true;
pages_mc.onPress = function(){
this.startDrag();
pages_mc.onRelease = function(){
this.stopDrag();
pages_mc.onReleaseOutside = function(){
this.stopDrag();
pages_mc.useHandCursor = false;
TweenLite.to(instr_mc, 1, {_alpha:100});
magDown_btn.onRelease = function() {
TweenLite.to(pages_mc, .25, {_x:0, _y:0, _xscale:100, _yscale:100});
TweenLite.to(magUp_mc, .75, {_alpha:25});
TweenLite.to(magDown_mc, .75, {_alpha:0});
this._visible = false;
magUp_btn._visible = true;
pages_mc.onPress = function(){
this.stopDrag();
TweenLite.to(instr_mc, 1, {_alpha:0});
I don't know how to turn drag off when I zoom out without using the onPress command, but I know that this is probably what is getting in the way of the button working?
Thanks!

One option is to make the background of the pages be the draggable parts rather than the movieclips that contain the pages and buttons. That way, the buttons could be atop the background and not have their access blocked.
Instead of coding the pages_mc, you would essentially have the background coded for the drag...
pages_mc.bkgnd.onPress = function(){
startDrag(this._parent);

Link a button inside a movie clip to a scene

I am trying to link a button that is inside a movie clip to a scene. The button has the instance name "cosmetic_btn" and the scene is called "Cosmetic Treatments".
On my main timeline I have the code:
cosmetic_btn.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
gotoAndStop(1, "Cosmetic Treatments");
And on the timeline inside the movie clip I have this code:
MovieClip(root).gotoAndStop("Cosmetic Treatments");
When I run the document I get the following error:
Home, Layer 'actions', Frame 101, Line 1
1120: Access of undefined property cosmetic_btn.
I have the instance name "cosmetic_btn" set on the button so I am unsure what is wrong here?
http://img600.imageshack.us/img600/3236/gp2g.png

One other thing you should correct is to add a frame number/label for the line....
MovieClip(root).gotoAndStop("Cosmetic Treatments");
otherwise you are likely to get an error regarding there not being a frame with that label

Button inside a movie clip

Ok, i'm new at action script so i have a problem
I have a sound inside a movie clip (sound_MC) in the main
timeline, and i have another movie clip with a button inside, and I
need that button to control that sound movie clip
on (release) {
gotoAndStop("off_radio"); // this goes to another frame in
the movieclip with the button (works fine)
on (release) {
_root.gotoAndPlay("stop_loop"); // this goes to another
frame of the sound MC (doesn't work)
// i have this in the stop button
on (release) {
gotoAndStop("on_radio");
on (release) {
_root.gotoAndPlay("start_loop");
// and this for the play button
whats the code for that ?
what should i do?

i solve the problem !! :-D
but now i hold like to now how i make a fade out sound
command when i enter a frame and a fade in when i enter in another
frame
here are the examples:
http://tubo_centeno.web.simplesnet.pt/problem/problem.html
http://tubo_centeno.web.simplesnet.pt/problem/problem.fla
can anyone help me?

Buttons inside a movie

I am having an issue with some buttons inside of a movie that
should reference a specific frame on Scene 1. the code I have is
on (release) {
gotoAndPlay("scene1", 546);
But it is doing is resetting to the begging of the movie
instead of going to frame 546 in scene 1. You can take a look at
the file by going to ftp://supersilo.com/exchange use the username
of expert and pass of exchange

don't use scenes for navigation and don't use the goto
functions. use frame labels and the goto methods. for example

Button no longer works when inside a Movie Clip?

Again I turn to the almighty Adobe forums for help...
So basically, I've had this problem for over a day now, and I've posted on Experts-Exchange.com... to no avail really.
So here we go:
I have a button in a Flash project I've made. It's used to jump to another place on the root timeline, labelled "Why". It used to work perfectly.
I have now placed the button inside a movie clip (it has to be in an animated sequence), but now it no longer works. It appears to work fine, the rollover state works and all. But when clicked it does nothing.
The code I use to work the buttons goes on the main timeline, the code for this button is:
mc_anim_backdrops_menu.btn_subsection1.onRelease = function() {
gotoAndStop("Why");
_global.swfloaded = "";
Why does it no longer work? and what can I do to fix it?
The question is posted here over at Experts Exchange - http://www.experts-exchange.com/Software/Photos_Graphics/Web_Graphics/Macromedia_Flash/Act ionScript/Q_24888850.html
what we've tried there is tracing the problem. The code seems to be pointing to the right place, but none of the actual function works.. as you'll be able to see if you open up the attached file (and change it's extension from .txt to .fla to get it working)
So would someone be able to open it up, have a look and tell me what's wrong? Because I'm stumped. And frustrated.

My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
So if you add a trace inside the release event handler, what do you get?
trace("My current scope is: "+this);
I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
You should probably use the MovieClip method and specifiy which timeline it should look in.
_root.gotoAndPlay("Why");
_level0.gotoAndPlay("Why")
_parent.gotoAndPlay("Why");
both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on...

AS3 Putting Buttons Inside Movie Clip

I am practicing AS3 (after years of AS2) and am having trouble having a button inside a movie clip talk to another movie clip on the main timeline. Here is the code:
OneButton.addEventListener(MouseEvent.CLICK, OneButtonClicked);
function OneButtonClicked(event:MouseEvent):void
MovieTarget.gotoAndStop(1);
MovieDescription.gotoAndStop("One");
TwoButton.addEventListener(MouseEvent.CLICK, TwoButtonClicked);
function TwoButtonClicked(event:MouseEvent):void
MovieTarget.gotoAndStop(2);
MovieDescription.gotoAndStop("Two");
The code above works, but if I put OneButton and TwoButton inside a movie clip, I know longer can target MovieTarget and MovieDescription. The reason I want to put OneButton and TwoButton inside it's own MC is so I can dim each button after it is clicked by toggling the playhead inside that MC. Help? Thanks!

Start over from the begining
press f8 and chose movieClip then draw your untoggled button call the movie button then create another movie and create your toggled button or greyed out button and call it greyedButton. Go to main stage add 2 button instances and 2 greyedButton instances( just drag from library). you have 4 instances on stage. give call instance names and place one them on top of each other so u can only see 2 buttons on stage. put the greyed button under the button.
now with action script
button1.addEventListener(MouseEvent.CLICK, OneButtonClicked);
function OneButtonClicked(event:MouseEvent):void
MovieTarget.gotoAndStop(1);
MovieDescription.gotoAndStop("One");
button1.visible = false; // here the greyed button will show
button2.addEventListener(MouseEvent.CLICK, TwoButtonClicked);
function TwoButtonClicked(event:MouseEvent):void
MovieTarget.gotoAndStop(2);
MovieDescription.gotoAndStop("Two");
button1.visible = true; // here button1 will go back to its orignal state
button2.visible = false // here the greyed button will show

Problems coding a button within a movie clip to navigate scenes

Hello there! I've got another probably noobish question to ask about CS6.
My goal is very similar to the one mentioned in this previously discussed forum question: http://forums.adobe.com/message/837995#837995 and also in this question http://forums.adobe.com/message/4172919#4172919
I am attempting to make a button inside a movie clip in my first scene go when clicked to the first frame of my second scene. I named the button's instance menu_button_1 and I believe Scene 1 and Scene 2 are the names of the scenes. (If they should have special names or instance names, I did not see where to type them.) Because of the similarities, I attempted to follow the suggestions on those pages. However I probably did some small thing wrong, (Or heck, maybe a huge thing.) which I what I'd like help with to find.
stop();
myButton.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
gotoAndStop(1, "Scene 1");
This seemed to be what was suggested to enter. I attempted to modify it to work for me as well. This is what I typed for the button's action.
menu_button_1.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
gotoAndPlay(1, "Scene 2");
(I removed the stop function because I have music looping in the movie clip that I want to play until the mouse is clicked.) (Also, I picked gotoandplay because I wanted scene 2 to start playing immediately when clicked rather than stopping.)
I tried variations, including "2" instead of "scene 2" and whatnot. I also tried linking it to differnet places just to see if that would work. It seems like it could link if I only asked for a frame within the movie clip itself, but it couldn't go to any other frames in scene 1 or scene 2. When I attempt, this message is displayed in the output:
ArgumentError: Error #2108: Scene 2 was not found.
    at flash.display::MovieClip/gotoAndPlay()
    at interactivestgermant_fla::menu_1/clickHandler()
It seems it cannot find my Scene 2. (It also cannot seem to find Scene 1 when I prompt it to do that.) I'm afraid I'm not sure of what I've entered incorrectly, though I'd imagine it involves how I typed the scene navigation. Should it have an instance name or something? I'd very muchappreciate a push in the right direction. If you need any more info I'll be happy to provide it. Thanks for the help! I very much appreciate it.

I bet you're absolutely right. However I am not sure how I am misnaming it, as to my ametuer eyes, it seems to be entered properly into the properties box? It does show up as "menu" written in white over the keyframes and also in the properties slot. I can include some images here to help out in correcting me.
http://girlfoxgirl.deviantart.com/art/Flash-Help-1-395704638   This image shows my movie clip. This seems to be the problem it's having, identifying "menu." Did I do that incorrectly? It looks to be in order.
http://girlfoxgirl.deviantart.com/art/Flash-Help-2-395704633 This is inside of the movie clip named menu. You can see I did the same to name the button menu_button_1.
http://girlfoxgirl.deviantart.com/art/Flash-Help-3-395704627   This shows the action I gave to menu_button_1 in which I attempt to have it naviagte to Scene 1 frame 493.
http://girlfoxgirl.deviantart.com/art/Flash-Help-4-395704623 This shows where I'd like the button to go to. (It is hard to tell if that's frame 493 or 492. I figured that it should be ok either way and if this frame is 492 then it's easily changed once I get the darn thing working in general) (Also, I named the layer "peanuts." I tired entering the name "peanuts" as well but it didn't seem to work either, so I figured "493" is easier since I know that you can go to a specific frame by doing gotoandplay("scene 1" , #) and I'm not sure if it requires any additional stuff to go to a name.
http://girlfoxgirl.deviantart.com/art/Flash-Help-5-395704687    These are the errors I get. I totally agree with you- It seems very much to be an issue of getting it to recognize the "menu." However I am unsure where I named something wrong. Is this enough info to help you perhaps point out where that is?

Access a button inside a movieclip

Hey...
Im pretty new to flash, I have a problem that have taken hours, only not to getting sorted out, so i'll try my luck here...
I've basicly made a rollover menu which is nested inside a movieclip. the movieclip is put on 1 st. frame on the main timeline and I want the buttons inside the movie clip to take the user to a different frame on the main timeline, but no matter what I do it's just not working...
here is some of he solutions i have tried to do:
function work1(e:Event)
//MovieClip(parent.parent).gotoAndStop("work1")
//gotoAndStop("work1")
//this.gotoAndStop("work1")
//parent(gotoAndStop("work1"))
//MovieClip(this.parent).gotoAndStop("work1")
//MovieClip(parent.gotoAndStop("work1"))
//this(gotoAndStop("work1"))
//main.gotoAndStop("work1")
//root.gotoAndStop("work1")
//MovieClip(root).gotoAndPlay("work1")
//MovieClip(stage).gotoAndPlay("work1")
//MovieClip(root.parent.parent).gotoAndStop("work1");
work1_btn.addEventListener(MouseEvent.CLICK, work1);
hope someone can help...

sure, there are a zillion ways, that timeout function was more to demonstrate the problem than offer a valid solution...
Personally, with what you're doing, here's my first inclination for handling it:
Just add this bit, dumping that other stuff:
stage.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(event:MouseEvent):void{
     if (event.target is SimpleButton&&event.target.name!=null){
          gotoAndPlay(event.target.name);
That assumes you've given those buttons the same name as the frame you want them to go to. In your example, rename that first button as work1, and that code will send you to the frame with that name on click. That code will handle all the buttons, assuming you name the frame and button instances the same (like button work2 would take you to a frame named work2 etc).
Since it's a stage click handler, it can handle any click. Here's the breakdown:
//adding a global click listener.
stage.addEventListener(MouseEvent.CLICK, clickHandler);
//what to do with the click
function clickHandler(event:MouseEvent):void{
     //here we're just checking to see what's clicked (from your example, they are SimpleButtons)
     //and then the && means 'and' we're making sure that button has a name.
     if (event.target is SimpleButton&&event.target.name!=null){
          //goto the frame with the same name as the button
          gotoAndPlay(event.target.name);
HTH,
-Ted

Target a button inside of a Movie Clip

I am trying to target a button inside a dynamically loaded
movieclip, such as the following (but is not working):
clipAnswerYesNo: Movieclip
testbutton: embeded button
Script is on main timeline.
_root.clipAnswerYesNo.testbutton.onRelease = function() {
trace(userAnswer);
D

ensure both the movieClip and the button have instance names.
also, maybe change your trace to:
trace("hit button"+userAnswer);
it is possible that the trace and therefore the button is
working, it's just the path to userAnswer is incorrect...

Run Button without execute the program

Hi,
Normally, when I am pressing the "run button", it will run the program. How do I prevent from executing the program until I want to enable? For example, I have 3 power supplies on my pxi box, and I don't want to run the program until I have all my value set: voltage, current limit, output function and etc...Then, I will press the button like (enable or set) to set a certain voltage at certain power supply. I am using Labview 8.6. Thank you.
Solved!
Go to Solution.

Move the Set button outside that inner loop. It should be inside the True case but not inside the inner loop.
To run it again for another power supply, you need to control the outer loop with a separate stop button. Remove the boolean constants from the True and False cases that are wired to the stop sign. Wire the new stop button to the stop sign. When you are done setting all power supplies, press the new stop button.
If you know you will only be using two power supplies, you could replace the outer while loop with a For loop with a constant value of 2 wired to the N. Then the loop will execute for the first power supply setting and then repeat for the next.
- tbob
Inventor of the WORM Global

Flash CS4 Link to a Movie Clip from inside another Movie Clip

I am working on a Flash CS4 project which has 5 buttons with 5 corresponding movie clips all on the main timeline. Everything in functional so far.
My problem is this: I want to be able to mouse click on a particular word in the text inside movie clip 4 ("mc4") and have it link to movie clip 3 ("mc3") (on the main timeline).
I've tried many things, and I can't get it working.
I have tried to highlight the word then link it to "mc3" in the properties panel where it says link (I successfully linked to an email address and to an outside website in other parts of the project)....
I tried to link it in the properties panel to "mc3", I tried & "parent.mc3", "root.mc3";
Linking it this ways seems to be the simplest, logical thing to do, but I don't know what kind of prefix it needs.
Then, I tried making the word (inside mc4) an invisible button (button6) then linking it to the mc3, with it's actionscript in the main timeline with the other button functions.
I tried duplicating mc3 and duplicating invisible button 3 and moving it's hotspot to over the word.
I tried putting a copy of mc3 and the button inside mc4, with the actionscript also inside mc4.
I tried duplicating mc3 and calling it mc6, and putting that inside mc4, with the actions back on the main timeline, and tried again with the actions inside mc4.
I tried with mc6 and invisible button 6 on the main timeline, but that doesn't seem possible.
I tried using this code from Adobe Actionscript 3.0:
button6.addEventListener(MouseEvent.CLICK, startMovie);
function startMovie(e:MouseEvent):void
this.play("mc6"); [and I also tried with "mc3"]
Nothing works!! Please, I would appreciate any suggestions!!
Thanks,
Suzanne

If I limit my attention to the second sentence of your posting, then I suggest the following (borrowing from the rest of your posting)...
If that invisible button6 is inside MC3 (on MC3's main timeline), atop the word you are trying to link to the movieclip, and you just want to make mc4 play by clicking that invisible button6, then assign the following code to the button6 inside MC3...
button6.addEventListener(MouseEvent.CLICK, startMovie);
function startMovie(e:MouseEvent):void
MovieClip(this.parent).MC4.play();
If I missed, then I missed following your explanation.

How can I load an external SWF into a movie clip that's inside other movie clip?

Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?

Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom

Button within a movie clip not working

Hiya,
I have a movie clip within my swf website that is basically
an icon that you roll over to produce the menu. The movie clip has
coding inside it to produce the rollover effect. This is as
follows:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
this.onRollOver = function(){
rewind = false;
play();
this.onRollOut = function(){
rewind = true;
Whilst this coding works fine for this movie clip, for some
reason the buttons within the movie clip that appear as you
rollover them will not work when pressed. I am trying to get them
to navigate the main timeline, i.e. coding as follows:
on (release) {
_parent.gotoAndPlay("home")
_parent should be correct, I've tried it without and with
_parent._parent however still it has no effect. From what I can see
everything should be working fine.
Is there some reason why buttons will not work within this
sort of roll over effect movie clip?
Thanks for your help.

you can't assign mouse handlers to a parent movieclip and
expect a child movieclip to respond to mouse events: the parent
will intercept those events.
to remedy, either assign all your mouse handlers on the child
generation movieclips or use a hitTest() for one of the
generations.

Button inside movieclip on stage

What do I have to do to get the button to work? I view the swf and there is no active button.
I need the button inside the clip to be active. I can't find the answer. Thank you.

no i put a button from the library inside the clip to see if i could access a button once movie played and i couldnt see the states of that library version if I viewed the scene I could.
I was going to create my own button, which I will, but I don't think I will be able to get to it once publised and I'm frustrated.
I think I have run into this before, it's been a while. Is it an enable thing?

Run Button inside a movie effect outside a movie

Similar Messages

Maybe you are looking for