Run CKMLCP (material ledger cockpit) for closed period in MMPV

Hi,
I would like to run CKMLCP for period 12.2008, however MMPV was run in 02.2009, and only january and fabruary 2009 are allowed for material postings.
How can I settle material ledger in 12.2008? I know about note 361236 (CKMLCP: No period-end closing operations after period shift), but don't know if this will do all the proper postings or only close 12.2008 technically.
Regards,
Karol

Hi Carol ,
Please remeber costing Run i.e CKLMCP is a closing activity so it should be done only at the time of closing a particular period .A syou said two periods are open for MM but costing also post some Accounting enteries if FI period is closed the its not possible.
And its not recommended to run costing any time in middle of the period.
Thanks
Deepa

Similar Messages

  • Closing Period through MMPV

    Hi,
    What are the precautions we have to take for closing period through MMPV?
    What is the Closing Procedure for Month?

    Hi,
    MMPV is only the stock closing period function, there are other financial tasks related to a full month end.
    If you are about to use MMPV then you should check for negative physical stocks and ideally correct them if appropriate.
    You should ensure that all stock counts due for the month to be closed have been keyed (and definitely if they were due in the <b>previous</b> month (because you can only ever go back ONE period before the current one as a maximum).
    Other than this there is not much else to worry about.
    Steve B

  • Difference between normal Costing run and Costing run in Material Ledger

    Hi everybody,
    I have a question i wanted to know why we implement Material Ledger .
    If material ledger is for settling variances on material then that is also possible without material ledger
    Please clear the doubt what is different in ML as compared to normal costing run
    thanks in advance
    Regards
    Deepa

    Costing run is to calculate the std cost estimate of materials and Material Ledger costing run is to calculate Actual cost of production of materials.

  • Can SAP run the depreciation for closed Period and posting to diff month?

    My client forgot to run the depreciation for Jan 2011, and now the Jan period has been closed and report also done.
    My solution was to re-open the Jan and does the depreciation, once completed reclassify Jan depreciation posting to Feb 2011 manually.
    I am just wandering whether SAP can handle this different way.
    Can SAP performs Jan (Closed Period) depreciation and post to Feb period automatically or any other suggestions?
    Cheers

    Hi
    Yes, you can do that
    Follow this thread... Unable to post depreciation- Error AA730
    Using ABF1, you can do it
    Br, Ajay M

  • CKMLCP  Material ledger closing

    Hi,
    We are doing closing entries for material ledter. After executing all the steps, when we are checking the detail of materials in VIEW of CKMLCP, it looks for some of the material the Closing entry doesn't took plance
    All the other activities like WIP & consumption revalution are done, but for many of the materials the closing entry not processed by the system.
    So if we are going to CKMI and then processing some of the materails it is performing the closing where as the materials which are of multileve nature for them the system is not processing. Do we need to uncheck the WIP & Consumption revaluation option and also what are the possibliities that system could not consider the materails for closing...
    Regards.....
    Shree J

    Hi...
       You can avoid this problem by changing Price control from 'S' to 'V' and Indicator from '3' to '2'. However you should know the business requirement. If moving average price is serve the material valuation you can change.
    KK Biswas/AGM(ERP), DSP

  • Material Ledger Status for exisitng materials change

    Hi,
    What is the best way to perform material ledger closing entries for pre-existing materials in plant?
    I have a plant that already has pre-exisiting materials since 01/2009 or prior, and then we activated material ledger for this plant.
    Of course, we then try to run actual costing CKMLCP for these existing materials for period 05/2010, and is errored with
    "carry-out period-end closing for materials in previous period" message.  I try OSS note 361236 to close out periods that are older than previous period..with the MMPV period shift situation; but is not helping because these materials are already existing, so I can have CKM3 analysis for these materials as far back as 01/2006...as I ran report S_ALR_87013180 to check the period status for all these materials to see how far do i have to go back in terms of period/fiscal yr.
    My question is, if there are pre-existing materials active in the plant and then we activated ML, how far do I have to go back to get the CKMLCP done? Or what is the best way to handle such scenarios?
    any advice?

    Hey,
    Can you let me know when did you do the ML startup?
    At production start, the system automatically sets all materials to price determination control 2, which will not be included in ckmlcp processing.
    And when you change the price determination from 2 to 3 via CKMM, the period status will be automatically changed to "new object", for which there's no need to do the period end closing.
    Anyway, if your materials is with status 30 for the previous periods, the most convenient solution is to manually set it to 70 for the last period. You may achieve this via program MLHELP_SET_PP_STATUS_70. You only need to do it for the period before last period. Then you can go ahead with the normal period end closing process for the previous period.
    Best Regards
    Young

  • Material Ledger New Status - 05 "Period Opened Without Stock"

    Hello,
    We are thinking of implementing note 1120562 into our system and feel pretty comfortable so far, but I had one question that is stopping me.  If I implement this note and it applies the new status so that materials are not selected to run in the material ledger close, will that be an issue when closing next month?  I know that previously I was not allowed to close for a material if it had not been closed in the prior month.  Has anyone applied this status and had issues?
    Thanks in advance!

    Hi Rebe,
    To see the transactions and documents for ML category in t-code CKM3 report  i.e., Beginning Inventory--> choose "Expand sub tree" and choose the corresponding line. I guess these , period status quantities and values entered entries are  for New period opening. Whenever  the New period is opened, for New materials also, Material Ledger document will be created and updated in Material Price analysis report. The Material ledger records the following categories of data and the system generates ML documents automatically :
    01.     Beginning Inventory
    02.     Price change
    03.     Receipts
    04.     Other receipts/consumption
    05.     Cumulative inventory
    06.     Consumption
    Also whenever Price determination for Material Master is changed from 02 to 03 or vice-versa, ML documents will be generated automatically and updates in Material Price Analysis report-t-code-CKM3.
    Regards
    appalas
    Regards
    appalas

  • Higher activity price in cumulative run in Material Ledger

    Hello,
    Scenario:
    The company is using material ledger and doing periodic run. After the periodic run, company post financial transaction and run cumulative run to take impact of financial transactions.
    During cumulative run, system is using actual price of the last month and revaluation the cumulative qty with this price. Due to no catual activity, the prices are very high. Due to this, system is revaluating cumulative quantities of all months with very high price (of last month).
    Please suggest to resolve this issue?
    Neeraj Rawat

    Hi Srinu,
    Do you mean that, just after changing the KP26 values, u are expecting the same to reflect in your cost component structure of materials? KP26 is only to plan the price of an activity type in a cost center. This will be applicable for the future period. ie when operations are confirmed in production orders in future, this costs will be absorbed to the production order.
    Use  S_ALR_87013611 or similar reports for actual activity prices(debits) and actual activity quantities. Former divided by later will give you the actual per unit activity price for the last period.( in case of 1 to 1 relationship between cost center and activity).
    Best Regards
    Vimal

  • In repeat run, can i calculate Depreciation for perticular period.

    Hi
    when I calculate the depreciation in Repeat Run, It shows the message that for 12 periods only the Dep is calculated.
    But I want to calculate the Dep for Particular period. Is it possible?????
    If possible pl give me the suggession
    Venkata Raju

    Hi,
    You can't do.
    See below note:
    It is possible to repeat the posting run within the period last posted. However, in contrast to the first run for a period, the repeat run can be restricted to specific assets. In the repeat run, the system posts changes to depreciation, as compared to the depreciation amounts from the previous run.
    Normally the repeat run is carried out at the end of the fiscal year, if completing postings are necessary because of corrections to manual depreciation or depreciation terms.
    Regards,
    Murali

  • Material ledger prices for material master

    Hi all
    We have activated Material Ledger. I like to dowload all the three currency prices for the materials. How is it possible?
    In MBEW only the company code currency is available.
    Also u cannot use the exchange rate as it gives wrong data.
    Regards
    JOE

    h

  • Reserval of Assessment Cycles for closed periods - FAGLGA15

    Hello,
    We have assessment cycles in closed periods which we want to reverse / repost in current period.  We are using ECC New GL functionality.  Tcode KISR does not seem to recognize Assessment cycles created with FAGLGA1* .
    Suggestions / options to achieve the end result, please.
    Regards
    Jayesh.

    Hi:
    If your CO allocation has some external postings (like GL or fixed assets) or generating some intercompany documents, then it needs FI to be open also. It happens sometimes if the allocation goes external so it would need fI period to be open also. If FI is close but CO is open, it would only work for CO specific allocations and others would error out.
    Please check the cycle/segment which is in error. If it is suppose to hit FI, then FI (OB52) and CO (OKP1) periods should be in sync.
    Thanks.
    Rahul

  • Can we run KSU5 - Assessment Cycle execute for previous periods

    Dear Gurus,
    Can we run KSU5 for previous periods.  Means I have not ran from April 2008 onwards.  Can I run right for all periods.  Any inconsistencies arises for running the KSU5.
    Please guide us.
    Regards
    Srinivas

    Hi Srinivas,
    You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
    Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
    Pls revert back for further assistance...
    Srikanth Munnaluri

  • 0COPC_C04 : Material Ledger Inactive for valuation area

    I ran RSA3 for 0CO_PC_ACT_02 and 0CO_PC_ACT_05 and I get 1000 records respectively. I ran the info package to load this data into BW to 0COPC_C04 . I am getting a message in the status tab " Job termination in the source system". When I look at the job log , it says " Material ledger not active for abcd Valuation area".
    SO I went to OMX1 and I beleive that a while back there was a change to do company code valuation , which got changes to plant valuation ,so this is what I see in the screen:
    Valuation area = 0001
    Company Code = abcd
    Price Det. = 3
    and there is this one records which shows :
    Valuation area = abcd
    Company code = abcd
    Price determination = 3
    and it is not check marked under ML Act . This is only in the dev box , it was fixed in QA and Prod. But never fixed in Dev.
    I am not sure , what to do , also I am not sure if this is what is causing the problem.
    Thanks

    Can some one guide me?
    Thanks

  • How to update closing period using MMPV after a long period

    We have IDES which we use in our lab. Since there is no regular admin, we didn't close periods using MMPV since last March. So the dates are 03/2006.
    I know that I can't simply type 03/2007. I know that I have to first close 03/2006, then 04/2006 and so on.
    But when I enter that, I get an error saying that 2006 is not the current calendar year. So I am kind of stuck. It doesn't let me enter 2006. So I don't know how to close those periods and bring the material master to current.
    Is there a way to do that?
    Regards.
    P

    I realized my mistake. That message (2006 is not the current year) was just a warning. When I click Execute button, I get this warning. Then I clicked the red check mark (near top left corner), which caused the period to close.
    P

  • Material Ledger - Error in closing entry

    Hi Gurus,
    We have an issue running the Post Closing entry of CKMLCP.
    The system shows the error M8 147 (Account determination for entry &  not possible) for one material, the only one pending material of the costing run.
    We checked the material master and the problem was the valuation category. This was modified by the correct valuation category (with correct account determination in the OBYC) in the material master, but the system still shows the error message M8 147 refering the old valuation category.
    Any suggestion???
    Thanks in advance!!!!

    Hi,
    Thanks for the response.
    The problem is that, for this material, the costing run shows now the correct valuation category ZE11 in the costing run result (but in pending status for the material), but the log shows the error message refering the old valuation category ZE09.
    The obyc must not to be mantained because, for the valuation category ZE09, only operation PRY should be possible (this has the correct account determination), not operation PRV. The error refers old valuation category ZE09, operation PRV.
    Thanks!

Maybe you are looking for