Run Process in TTY session
I'm working on a linux machine, and have a process that I want to launch from within a java program (please, no sermons about platform dependence and choosing java as a technology. I have my reasons).
This process typically writes a few questions out to stdout and asks for responses on stdin. My java program has already gathered all of the information necessary to answer these questions, and done so in what I believe is a more professional and efficient manner. I would like to be able to simply answer these questions by attaching readers and writers to the input and output streams of the process (think expect script, but written in Java).
The problem is that the process I'm launching seems to know that it has attached to a process that is not part of a tty session, so instead of posing it's questions on stdout and looking for input on stdin, it puts up dialog boxes.
Does anybody know how to start a process and associate it with a tty session, or fool it into thinking it's running with a tty session, so that it will accept input on stdin?
- Adam
guitar_man_F wrote:
johndjr wrote:
I don't know if this will work for you or not, probaby not but I guess it's worth a try.
What happens to the program if DISPLAY is not set?
It seems to me that it would not be able to open any X windows, but then again it might just give up.
I assume that you can't modify the program and that it is not possible/feasible to have the author modify it so that you can provide the info in some other manner, say an answer file or something.Unfortunately, that's not an option, because after it does its information gathering, it then opens a window that I DO want displayed on screen.
Anybody else know how to do something like this? Every work around I've tried has failed. I'm stuck.
I suspect you can craft a script which will exhibit the same behavior that is causing you so much trouble within java.
Thus separating the question completely from java. One advantage to that is that you can then pose the question on other non-java related sites.
If you can find a solution using the script only then you can implement it in java, if by no other means calling the script.
If you cannot then nothing you do will fix it in java.
I suspect you will not be able to do it. Thus you would need to look for another solution. As suggested above telnet (even into your local box) and see if you can get it to go that way.
Another alternative would be to use a keyboard pusher (perhaps Robot or as an example AutoIt works nicely on windows.) That would allow you to simulate the user experience and then some tricks like hiding the first window behind a splash screen might allow it to simulate what you want.
Similar Messages
-
Break a dependency of a running process on the X session
Is it possible to break a dependency of a running process that was started on an X session such that I can exit the X session and the process still runs? Example:
*Login to X
*Start an application, for example a file transfer that will take several hours
If I log out of X, that process will die along with anything else I am running under X. I want to be able to take that process and somehow push it out of the xsession so it will continue to run even after I log out of X or even stop X all together (say drop down to runmode 3).tmux or screen...
Or, if you are referring to a process that is currently running, you could try reptyr
https://github.com/nelhage/reptyr -
Work process re-started , session terminated
Hi Gurus,
While i creating a purchase order (me21n) , the process runs for a while and then i am getting a SAP GUI message "Work process re - started , session terminated" and the session is closed.Can anyone give me the cause of the problem and solution for the same.
Developers Trace File Entry:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:09:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 1680
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:09:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C C Fri Aug 31 16:09:41 2007
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 160937 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I I Fri Aug 31 16:09:53 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C C Fri Aug 31 16:09:54 2007
C Using Provider SQLNCLI
C The IRow interface is supported by this OLEDB provider
S S Fri Aug 31 16:09:55 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EFFBD0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DF30098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DF302C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A A Fri Aug 31 16:09:56 2007
A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
B B Fri Aug 31 16:10:05 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
I I Fri Aug 31 16:10:10 2007
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_01@< appears or changes (state 1)
E E Fri Aug 31 16:10:11 2007
E Replication is disabled
N N Fri Aug 31 16:10:28 2007
N login/password_change_for_SSO : 1 -> 1
B B Fri Aug 31 16:10:38 2007
B table logging switched off for all clients
B B Fri Aug 31 16:10:41 2007
B dbmyclu : info : my major identification is 3232245831, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 96AAC2654435DC46AFA4C31629BE366F.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
S S Fri Aug 31 16:15:55 2007
S found spool memory service RSPO-ACTIONS at 1DF34B50
M M Fri Aug 31 16:20:14 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1680)
When : 8/31/2007 16:20:14.837
Threads : 2
Computer Name : IDES
User Name : SAPServiceI04
Number of Processors: 2
Processor Type: x86 Family 15 Model 6 Stepping 4
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 9cc
eax=00000000 ebx=00000000 ecx=00000014 edx=00000000 esi=003860ec edi=003860c0
eip=7c82ed54 esp=0300daa8 ebp=0300dab8 iopl=0 nv up ei pl nz ac pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000212
function : MmxFree2
00f35dde 2b0568e59701 sub eax,[MmxUheaderSz (0197e568)] ds:0197e568=00000010
00f35de4 50 push eax
00f35de5 68dd000000 push 0xdd
00f35dea ffb4246c010000 push dword ptr [esp+0x16c] ss:0300dc14=7c82f9dd
00f35df1 e890ac1200 call memset (01060a86)
00f35df6 83c40c add esp,0xc
00f35df9 8b4308 mov eax,[ebx+0x8] ds:0300d006=2bf38b08
00f35dfc 8bf3 mov esi,ebx
00f35dfe 2b730c sub esi,[ebx+0xc] ds:0300d006=2444890c
00f35e01 89442418 mov [esp+0x18],eax ss:0601aaaf=00000000
FAULT-> 00f35e05 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e08 7513 jnz MmxFree2+0x4cf (00f35e1d)
00f35e0a 8bce mov ecx,esi
00f35e0c e814a7ffff call MmxIBlockRemove (00f30525)
00f35e11 8b4308 mov eax,[ebx+0x8] ds:0300d006=08460108
00f35e14 014608 add [esi+0x8],eax ds:033930f2=00000000
00f35e17 89742414 mov [esp+0x14],esi ss:0601aaaf=00000000
00f35e1b 8bde mov ebx,esi
00f35e1d 8b7308 mov esi,[ebx+0x8] ds:0300d006=f6f30308
00f35e20 03f3 add esi,ebx
00f35e22 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e25 750d jnz MmxFree2+0x4e6 (00f35e34)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0300e648 00746014 3cc00548 3d07d010 06751220 00000000 disp+work!MmxFree2 [mmxx.c (2440)]
0300e668 006450a7 00000000 00000001 3cc88e78 3cc485e8 disp+work!ab_sqlsclose [absapsql.c (8104)]
0300e690 006466c6 00000013 00750af1 00000000 000000cd disp+work!ab_popbst [abstacks.c (4763)]
0300e698 00750af1 00000000 000000cd 00000000 01c720fa disp+work!ab_poprsql [abstacks.c (1167)]
0300e6cc 006e0f51 00000000 3d170778 00000000 00f00105 disp+work!ab_jsqls [absapsql.c (1306)]
0300e770 00766be4 3d1715b3 3d170778 00000000 01afb3a4 disp+work!ab_extri [abextri.c (431)]
0300e784 007ebf1c 00000000 7c36a42b 000004b6 00571b1a disp+work!ab_xevent [abrunt1.c (261)]
0300e794 00571b1a 3d171080 0000002e 3d170778 3d17139a disp+work!ab_dstep [abdynpro.c (460)]
0300e7bc 005740de 3d170778 3d170778 7c36a42b 00000000 disp+work!dynpmcal [dymainstp.c (2312)]
0300e7d4 00573680 3d17139a 3d170778 00000003 0300fdcc disp+work!dynppai0 [dymainstp.c (1043)]
0300e7f0 00549340 3d170778 00000002 00000001 00000000 disp+work!dynprctl [dymainstp.c (350)]
0300fdcc 004747f4 00000002 0300fe74 00000001 00497626 disp+work!dynpen00 [dymain.c (1375)]
0300fddc 00497626 00000002 00000000 003860a8 00000002 disp+work!Thdynpen00 [thxxhead.c (4353)]
0300feec 004979e0 00000001 7ffd4000 00000000 00000000 disp+work!TskhLoop [thxxhead.c (4117)]
0300ff04 00421d07 00000000 00000000 0300ff60 00401059 disp+work!tskhstart [thxxhead.c (1038)]
0300ff14 00401059 00000003 003860a8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1009)]
0300ff60 01060bcf 00000003 003860a8 003828f8 0152d000 disp+work!main [thxxanf.c (58)]
0300ffc0 77e523e5 00000000 00000000 7ffd4000 80a56be3 disp+work!mainCRTStartup [crtexe.c (398)]
0300fff0 00000000 01060a8c 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id d2c
eax=0000005e ebx=00000103 ecx=00000010 edx=000719bb esi=00000000 edi=00000000
eip=7c82ed54 esp=04a1feb0 ebp=04a1fef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:04a1feb0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:07a2ceb7=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
04a1fef4 00fc37ec 000006ac 00000000 00000000 0038cd48 ntdll!KiFastSystemCallRet
04a1ff84 7c349565 00000000 00000000 00000000 0038cbd0 disp+work!SigIMsgFunc [signt.c (559)]
04a1ffb8 77e6608b 0038cbd0 00000000 00000000 0038cbd0 MSVCR71!endthreadex
04a1ffec 00000000 7c3494f6 0038cbd0 00000000 00000000 kernel32!GetModuleFileNameA
M -
M M Fri Aug 31 16:20:16 2007
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M M Info for wp 0
M M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 0
M tid = 9
M mode = 0
M len = 787
M rq_id = 423
M rq_source = 1
M last_tid = 9
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M M Adresse Offset Data from input buffer
M -
M 054A7D70 000000 00000000 00000000 01502700 00000000 |.........P'.....|
M 054A7D80 000016 00000000 0000009f 74100623 00170000 |........t..#....|
M 054A7D90 000032 04880131 31363000 77696e64 6f77732d |...1160.windows-|
M 054A7DA0 000048 31323532 00100409 00033731 3010041d |1252......710...|
M 054A7DB0 000064 00013010 040f0004 000012ad 10041900 |..0.............|
M 054A7DC0 000080 02000010 05010016 000d0000 000d002b |...............+|
M 054A7DD0 000096 a1001fa2 00000000 00000000 0000100c |................|
M 054A7DE0 000112 08001000 00029f00 00047400 00029f00 |..........t.....|
M 054A7DF0 000128 00047410 0a010009 00000000 00000000 |..t.............|
M 054A7E00 000144 00100a03 00090100 00000000 78001f10 |............x...|
M 054A7E10 000160 0a030009 03000900 00007800 0a100a03 |..........x.....|
M 054A7E20 000176 00090200 00000300 75000a10 0a030009 |........u.......|
M 054A7E30 000192 01000000 00007500 0a100a05 00090100 |......u.........|
M 054A7E40 000208 00000000 75000910 090e00c8 00c80000 |....u...........|
M 054A7E50 000224 00000075 00090000 23000700 0200000c |...u....#.......|
M 054A7E60 000240 01000000 00002300 82003c00 00000003 |......#...<.....|
M 054A7E70 000256 00070000 00070000 00000000 00000000 |................|
M 054A7E80 000272 00000000 00000000 00020005 00020002 |................|
M 054A7E90 000288 000c0014 00110003 0001000a 000e0005 |................|
M 054A7EA0 000304 00060003 000a000f 000c0008 000a000c |................|
M 054A7EB0 000320 000c0008 00030003 0002000a 0005000a |................|
M 054A7EC0 000336 0005000a 0005000a 00050005 00011100 |................|
M 054A7ED0 000352 11001100 11001100 11001100 11001100 |................|
M 054A7EE0 000368 11001100 11001100 11001100 11001100 |................|
M 054A7EF0 000384 11001100 11001100 11001100 11001100 |................|
M 054A7F00 000400 11001100 11001100 11001100 11001100 |................|
M 054A7F10 000416 11001100 100c0200 18000000 07000000 |................|
M 054A7F20 000432 23000000 07000000 00000000 00000000 |#...............|
M 054A7F30 000448 00100909 00180001 00077920 20202020 |..........y |
M 054A7F40 000464 20202020 20202020 31303030 0000100a | 1000....|
M 054A7F50 000480 01000900 00000000 00000000 100a0300 |................|
M 054A7F60 000496 09010000 00000078 001f100a 03000902 |.......x........|
M -
M M *****************************************************************************
M *
M * LOCATION SAP-Server ides_I04_00 on host ides (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Aug 31 16:20:16 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 3
M *
M *****************************************************************************
M M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was set. rc: 1 BREAK_REQUESTED
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
M ThDelEnqInfo: del enq_own >20070831161118747000000000ides............................</1
M ThDelEnqInfo: act enq info: 1
M ThDelEnqInfo: del enq_own >20070831161118747000010000ides............................</2
M ThDelEnqInfo: act enq info: 0
A TH VERBOSE LEVEL FULL
C Fri Aug 31 16:20:17 2007
C SQLBREAK: BREAK_REQUESTED upgraded to BREAK_IN_PROGRESS sloledb.cpp 4187
M Fri Aug 31 16:20:18 2007
M SosSearchAnchor: search anchor for 4
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThSaveContext: roll out
M ThRollOut: roll out T9/U13/M0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U13 M0 I1 (Level 7) ok
M ThCheckEmMagic: check em magic at 3CC00A80 for T9/M0/I1
M ThCheckEmMagic: em magic at 3CC00A80 for T9/M0/I1 o.k.
M ThEmContextDetach2: detach T9/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE YES YES NO 255 255 20070831 160937 IDES C Rollback Work (0)
B Disconnected from connection 0
B statistics db_con_commit (com_total=149, com_tx=34)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c 357]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:20:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 2460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:20:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C C Fri Aug 31 16:20:38 2007
C Using Provider SQLNCLI
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 162037 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C Using Provider SQLNCLI
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EF7370
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DEF0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DEF02C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ThCheckPrevUser: clean previous user T9/U13/M0
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 0
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M C The IRow interface is supported by this OLEDB provider
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1283]I Got the same problem but at that time i have installed GUI of lower version. WHen i have upgraded the GUI it worked fine. Better you check once the SAPGUI configuration.
-
A workaround was suggested by a member of the community to turn off both hardware and Flash acceleration. It worked fine (no crashes since), but runs very slowly. In particular, takes five seconds to exit and is often still listed as a running process. Very slow in connecting to Web pages, and very slow loading them because of the graphics. Very slow in loading video. I expected slower responses, but this is REALLY slow. I'm running 64-bit Windows 7 and an Nvidia GE Force 7800 graphics card with all the drivers updated and the plugins for Firefox mostly set on "ask to activate". Should I expect this much reduction in performance when the workaround I mentioned was put into place? If so, it's half a loaf at best. The only thing questionable is that I have two Youtube downloaders that I am trying, but I made the assumption that these were only applied when you downloaded something from Youtube.
In case you are using "Clear history when Firefox closes": do not clear the Cookies
If you clear cookies then Firefox will also try to remove cookies created by plugins and that requires to start plugin-container processes that can slow down closing Firefox.
Instead let the cookies expire when Firefox is closed to make them session cookies.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox" -
ORABPEL-05002 for long running process
Hi everybody,
My question is related with a long running process I have designed and which, after running for a couple of days, ends by reporting the ORABPEL-05002 error:
===============================================================
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
===============================================================
Looking in the Manual Recovery screen, I can see an Activity I can recover. It's about an assign Activity where I'm doing a single boolean assignation.
Of course, together with the ORABPEL-05002 error I got also the 'Transaction was rolled back: time out' message. Note that I have modified the transaction-timeout value to 180000. The error occurs during the night, with no heavy load of the server.
Recovering the assign activity brings back the process in the running state.
My process pattern:
while (1 == 1) {
do activity;
wait_timeout();
So, I have the following questions:
1. Which is cause of this error?
2. How may I automatically recover this lost activity? RecoveryAgent?
Any suggestion is appreciated.
Regards,
amo
P.S: the full stack of error messages reported in domain.log:
===============================================================
<2006-09-18 08:08:34,101> <ERROR> <SRH.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
javax.ejb.EJBException: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
at com.evermind.server.ejb.EJBUtils.makeException(EJBUtils.java:873)
at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.handleWorkItem(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:1479)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: No Exception - originate from:
at com.evermind.server.ejb.EJBUtils.makeException(EJBUtils.java:871)
... 10 more
javax.ejb.EJBException: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.handleWorkItem(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:1479)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handle(PerformMessageHandler.java:45)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:08:34,129> <ERROR> <SRH.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.PerformMessage"; the exception is: Transaction was rolled back: timed out; nested exception is: java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,236> <ERROR> <SRH.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "activity manager": Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
ORABPEL-02094
Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
at com.collaxa.cube.engine.core.ScopeContext.getScope(ScopeContext.java:213)
at com.collaxa.cube.engine.core.WorkItem.setCubeInstance(WorkItem.java:259)
at com.collaxa.cube.engine.core.WorkItemFactory.init(WorkItemFactory.java:68)
at com.collaxa.cube.engine.core.WorkItemFactory.create(WorkItemFactory.java:58)
at com.collaxa.cube.engine.adaptors.common.BaseWorkItemPersistenceAdaptor.load(BaseWorkItemPersistenceAdaptor.java:147)
at com.collaxa.cube.engine.data.WorkItemPersistenceMgr.load(WorkItemPersistenceMgr.java:75)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5185)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5173)
at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:2136)
at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:145)
at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:116)
at IActivityManagerLocalBean_StatelessSessionBeanWrapper52.expireActivity(IActivityManagerLocalBean_StatelessSessionBeanWrapper52.java:645)
at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:43)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,274> <ERROR> <SRH.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
ORABPEL-02094
Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
at com.collaxa.cube.engine.core.ScopeContext.getScope(ScopeContext.java:213)
at com.collaxa.cube.engine.core.WorkItem.setCubeInstance(WorkItem.java:259)
at com.collaxa.cube.engine.core.WorkItemFactory.init(WorkItemFactory.java:68)
at com.collaxa.cube.engine.core.WorkItemFactory.create(WorkItemFactory.java:58)
at com.collaxa.cube.engine.adaptors.common.BaseWorkItemPersistenceAdaptor.load(BaseWorkItemPersistenceAdaptor.java:147)
at com.collaxa.cube.engine.data.WorkItemPersistenceMgr.load(WorkItemPersistenceMgr.java:75)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5185)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:5173)
at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:2136)
at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:145)
at com.collaxa.cube.ejb.impl.ActivityManagerBean.expireActivity(ActivityManagerBean.java:116)
at IActivityManagerLocalBean_StatelessSessionBeanWrapper52.expireActivity(IActivityManagerLocalBean_StatelessSessionBeanWrapper52.java:645)
at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:43)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-09-18 08:09:05,275> <ERROR> <SRH.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessage"; the exception is: Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessage"; the exception is: Scope not found.
The scope "BpSwt2.30995" has not been defined in the current instance.
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:152)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
===============================================================These are the possible cause to the problem and their solutions:
Poor performance of the dehydration database If you are using Oracle Lite as dehydration store, please switch to use Oracle 9i or 10g. If Oracle 9i/10g is already in use, check the database parameter 'process' and 'session' to make sure it can handle the expected throughput.
OC4J has too few available connections to the dehydration database. Increase the maxConnection number of the BPELServerDataSource at the BPEL_HOME/integration/orabpel/system/appserver/oc4j/j2ee/home/config/data-sources.xml (for developer edition) or IAS_HOME/j2ee/OC4J_BPEL/config/data-sources.xml (mid-tier installation).
Size of message is too big Two ways to deal with this problem:
Increase the transaction timeout at PEL_HOME/integration/orabpel/system/appserver/oc4j/j2ee/home/config/server.xml (developer edition) or IAS_HOME/j2ee/OC4J_BPEL/config/server.xml (mid-tier installation)
Decrease the auditLevel from BPELConsole -> Manage BPEL Domain -> Configurations tab. Doing so will reduce the amount of data saved to the dehydration store.
Cheers
Anirudh Pucha -
Transaction ME21n (Will not run as a BACKGROUND SESSION)
The requirement is to generate Purchase Orders (Stock Transport Orders to be precise).
The RFC has to create a session which will be executed...say...before midnight to generate the sto (TC -> SM35).
I have used BDC inside my RFC calling the transaction ME21n. It runs fine as a foreground session, but will give a error if the session is run as a background session (Due to the dropdown lists in ME21n I guess).
The solution I figured out is to use ME21. This does execute in the background successfully.
But given the fact that ME21 is the OLD transaction and ME21n (enjoy sap transaction, right?) to be the one to be used now, my dilemma is in choosing ME21 and risk the scenario of this transaction being obsolete and not supported the SAP for technical support in the future.
Can any body please help me on this.
Thank you.
Message was edited by: Sai Sanathanhello,
with transaction VL10BATCH you can create new variants, and shedule background jobs. This should work.
However, you need another user role. (on the last tab of the selection screen of VL10B)
It is the F code profile you have to change. With this profile you can choose whether a list needs to be shown, or whether the deliveries have to be created right away (without showing the list). The second option should work in background. After delivery creation, you can check the log using transaction V_SA.
So you need to create a selection variant with changed user-role for the backround job.
You can maintain user-roles via transaction VL10CUA.
You can input-enable user-role via transaction VL10CUV.
If you don't want the users to be able to run VL10B without showing the list, you have to create your own scenario, and use VL10X to start this scenario. Although this is not really necessary.
I hope this makes things more clear for you.
regards,
Joris.
Here is a copy of the OSS-note (310022) I was talking about:
Symptom
o For regular planning, you want to transfer the delivery creation
in a job to the system administration. Here, you have
difficulties.
o Background processing of Transaction VL10* does not generate
deliveries but only a list in the spool.
Additional key words
VL10BATCH, VL10A, VL10B, VL10C, VL10D, VL10E
Cause and prerequisites
Solution
For planning the delivery creation in background processing you must
o activate a user role for immediate creation of deliveries (in the
standard system, the immediate delivery creation is deactivated
for all user roles for reasons of safety),
o create a selection variant for one of Transactions VL10*.
Activation of the user role for background processing
The user role controls the entire processing of the delivery list.
Within Transactions VL10*, you can display and maintain the user role on
the "User role" tab page. You can carry out the maintenance also via
Transaction VL10CUA. Note 301578 describes how to make a user role ready
for input.
An F-code profile is linked to the user role. The F-code profile
controls the internal process of the transaction. Two F-code profiles
are provided in the standard system:
o 0001 Display delivery list
o 5001 Supply delivery list
In the user role you want to use for background processing, you have to
replace F-code profile (not "AllowedDialogFCodes") 0001 with profile
5001:
1. Call Transaction VL10CUA for maintenance of the user roles.
2. You might want to copy one of standard user roles 5001 to 5103 that
is planned for processing in the background to a separate role in
the customer namespace, for example, 9001 or Z***.
3. Branch to the detail view of the user role and change the entry for
the F-code profile from "Display delivery list" to "Supply delivery
list".
Creation of the selection variant
1. Call the desired Transaction VL10* and branch to the "User role" ta
page. Do not use Transaction SE38 or VL10BATCH for variant
maintenance of VL10*.
2. Here, enter the user role that you have maintained for background
processing.
Caution! If you use a user role with an F-code profile for the
immediate creation of deliveries, you receive no dialog with a
shipping due list but the deliveries are created immediately at the
start of the selection!
3. Enter the remaining selection criteria on the various other tab
pages.
4. Select function "Goto -> Variants -> Save as variant..." and save
the selection criteria entered as a variant. You might classify the
variant as "Only for background processing", in order to avoid a
start of the delivery creation in the dialog by mistake.
5. Make sure that the objects of selection screen 1060 have been saved
and that checkboxes "Save field without values" are not filled with
all objects (in particular in Release 4.6B) for the desired
settings.
You can schedule the selection variant via Transaction VL10BATCH for
regular use in the batch.
And also the OSS-note (301578) about input-enabling user-role:
SAP Note No. 301578 22.08.2005 Page 1
Number 301578
Version 4 from 08.05.2000
Status Released for Customer
Set on 08.05.2000
Language EN
Master language DE
Short text VL10: Ready to input status of user role
Responsible SAP AG
Component LE-SHP-DL
Delivery Processing
Long text
Symptom
On the selection screen of transaction family VL10*, the selection
criteria in the 'user role' tab are no longer ready for input of Release
4.6C.
They are delivered in the standard SAP system not ready for input.
Additional key words
Cause and prerequisites
As of Release 4.6C, the ready for input status in the 'user role' tab is
linked to settings in the scenario and the user role.
1. In order to get the ready for input status for the "Role" field, set
"Allow assignment" to 'X' in the scenario that you are using
(Transaction VL10CUV or SM31, V_T186V, T186V-ALLOW_USER_ROLE = 'X').
The system administrator (Customizing authorization) can then
determine whether only the user role preset in the system is allowed
or whether any number of other user roles may also be used for this
scenario.
2. For the check box "Use list profile" and therefore all possible
settings for the "user role" tab, the ready for input status in the
user role can be allowed in "Chang. attrbute" (changeability of the
attributes).
Set this field with Transaction VL10CUA for the used user role to
'X' (Transaction VL10CUA, or SM31, V_T186, t186-CHANGE_ALLOW = 'X').
Background:
The settings in the scenario and user role have in the course of time
become so wide-ranging and far-reaching that an additional feature had
to be implemented: a system administrator must be able restrict the
changes by the end user at different levels .
You now have the option of determining for every user role whether that
settings determined on the selection screen may be changed again.
You also have the option of determining in every scenario in which this
user role is used whether the change is allowed for another user role.
In the context of the fixed link of the scenario to a transaction and
therefore to the authorization concept of mySAP.com - user-roles can be
controlled at user level - whether the settings for the user role tab of
the selection screen of VL10* may be changed by a user or not.
Solution
Maintain setting in scenario (VL10CUV) and user role (VL10CU)
(Customizing authorization required). -
How to process batch input session through program
Hi Friends,
I am getting 5 batch input sessions in SM35,but I want to process these all sessions through program without going to SM35.
How it is possible through Program?
Please Guide me!
Thanks,
YogeshHi,
It's the report to run the batchinput sessions.
When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
For example you can use it in the same program where you create B.I.:
Here the code to fill the structures of FI batch input
standard....
...here it creates session...
SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
WITH CALLMODE = CALLMODE AND RETURN.
....here it runs session....
SUBMIT RSBDCSUB WITH MAPPE = P_NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
TO SAP-SPOOL
LIST NAME P_NAME
LIST DATASET P_NAME
COVER TEXT P_NAME
NEW LIST IDENTIFICATION ' '
EXPORTING LIST TO MEMORY
AND RETURN.
regards,
Shiva. -
Handling long running processes in APEX
Hello Experts,
I need your help!
I would like to call a long running PL-Proc from an Apex-App. So I build a page for the parameters with the wizzard - all fine.
Pressing the button starts the pl-proc - thats also fine.
Problem: While the PL-Proc is running, there is no activity signaled in the browser. There is no way to see, that something is running in the background.
After the pl-proc is finished, the branch to an other site took place - so the "after process" action is working as desired.
I tried "javascript:html_Submit_Progress(this);" - but this is not a solution because there is only a very short time to reload the page itself. The PL-Proc need much more time.
Is there a way to show the user, that background action is running?
Any Ideas?
Thanks for your help!
Kind regards,
FrankA few things to keep in mind. The animated gif solutions don't show a true progress bar indicator, it's just an animation on a loop. If the process takes too long, you will hit the session timeout value defined for Oracle HTTP Server.
Another thought is this. In the code that is the long running process, make calls to [dbms_application_info.set_session_longops|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_appinf.htm#i996999] that indicate the real progress in the code. Then have a page that queries v$session_longops and refreshes every x (say 5 seconds). That page could even have an animated gif on it to indicate there is still activity.
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://www.amazon.com/gp/product/0071613706?ie=UTF8&tag=tylsblo-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0071613706] -
How to run the Batch input session(SM35) in background thru Report program
Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM -
Resume/restore a running process
i issue a command within an applescript and at a later time, need to access this new running process to check on its status. is this possible?
the command i am issuing is the HandBrakeCLI app which reencodes video's and can take many hours. the command in the applescript is of the syntax:
+set hbcli_cmd to "/Applications/HandbrakeCLI -i /path/to/file -o /path/to/out/file -other -parameters"+
+do shell script hbcli_cmd+
listing running processes with "ps -efwww", i can see the process. i need to "reopen" this process to see how its getting on. additionally, i would also need to place it back to the background as well!
many thanks,
jingo_manthats exactly it. if i run the HandbrakeCLI command directly in a terminal session, it has an "interface" with progress, etc. i would like to be able to see this data if possible.
i used to have a linux machine, which i used the "screen" utility to run/wrap other commands inside. i could then restore that session or command. it was useful for overnight torrent work... would this be applicable on the osx platform?
or can i access it directly like you suggested? -
Running process in bg, logged out. Logged in on other terminal, termination
Hi,
I have got an issue.
Is there a possibility to "somehow" terminate implicitly a process on other session (when you are just logged in and nothing more is done), which has been introduced some time ago ?
I mean that scenario:
Terminal 1: run process in the background - jobs tells it is running. Then, I log out from this terminal.
Terminal 2: After above operations, I log in once again and do nothing. I am just logged in.
Is there a possibility, to terminate Terminal 1's process running in the background, when I do nothing on Terminal 2?
/Greg GI have The same problem, hopefully someone can help us
-
Unable to process EWA service session for portal instances
Hi Guru,
I am in process of generating EWA reports for portal ,below are the steps I have completed successfully.
1. SMD agent installation on portal.
2. Defined portal system in SMSY.
3. completed SOLMAN_SETUP.
4. Completed Setup Wizard for managed system.
5. Deploy IS agent via SDM in Solman.
6. Introscope agent setup done for managed system
7. Managed system data is visible in IS Enterprise Manager.
I have created EWA service session for portal but I am unable to process the service session in DSWP ,I have ran SM:EXEC SERVICES job but still I am unable to process the session data.
System Configuratoi: SAP EHP 1 for SAP Solution Manager 7.0 and portal is netweaver 7.0
Thanks
AbullaisHi,
I have exactly the same problem as this and have performed all the checks as specified but still my Java only NW 7 system shows "Dates for this session are overdue".
My Solman system is Ehp1 SPS 20 and all the managed system setup using the wizard has completed successfully. In Root Cause analysis I can see the data that the extractors have gathered on the J2EE system and in Enterprise Manager I can see the Introscope data also.
The only thing I can think of that may be affecting the EWA session is that after I added the system into the logical component that is part of the Production solution landscape the scheduled EWA session that then appeared for the J2EE system in the list of sessions had a date set for the next scheduled EWA run (29th March). To test the EWA report for my J2EE only system I used the "change date" option after clicking on the J2EE session and set it to 25th March (this changed on 24th March). The session date then reflected the EWA session for the J2EE only system woul run on the 25th.
Checking the session this morning I have the red flag with "Dates for this session are overdue" status.
The sessions for the ABAP based systems are working fine, it's only this one system that is J2EE only that I have a problem with.
Any pointers ?
Regards,
Brian. -
HTTP Server Hangs on Long Running Process
Hi,
We are having an issue with our production environment where long running processes i.e. > 5 mins will cause the client application to stop responding. We notice that this is only affecting forms which has no activity during the busy period i.e. forms which call a back end DB procedure or function and waits for a response from the DB to say that the process is done.
Checking on the process itself from the DB shows that the process has completed successfully but somehow there's no response back to the client to say that it's completed. As a result, the client will be in busy status forever.
We are sure that the issue originates from the HTTP server because when we by-pass the HTTP server i.e. send the request directly to the Apps server, this behaviour is not happening.
By thew way, we are running on Oracle Forms 11g using Weblogic.
Changes made so far but to no effect:
maxBlockTime=1800000 (web.xml)
keepAlive=Off (httpd.conf)
Timeout=1800 (httpd.conf)
FORMS_TIMEOUT=60 (formsweb.cfg)
heartbeat=4 (formsweb.cfg)
Session-Timeout=30 (web.xml)
Can this be related to network configuration? If yes, what are the things to look for?
Thanks.as the response came from the server your httpd service is not getting active for that you
need to keep the httpd service alive so that the response can be obeyed
just try this
keepAlive=On (httpd.conf)
.. -
Hi,
Please provide an overview of AP payment run process.
Thanks,
TeoHi,
APP ( T.code F110) is used to make payments enmasse for one or more vendors/customers.
We can also group vendors/customers for more than 1 co.code for payments.
The entore config for APP is done in capsule T.code FBZP.
Here are the steps:
1. Set up paying and sending co.codes( In case of cRoss co. payments paying and sending co.codes will ahve to be different)
2.Set up a payment method for country and co.code 1 each for outgoing and incoming payments.
3.Define house banks and set up bank accounts for payment method with relative ranking.
4.In F110 :
define the parameters like co,code;vendors etc
craete and edit a payment proposal where you can select the open items to be paid
create and run a payment run
Hope this helps.
I would also recommend to go thru SAP help and also search this forum for further notes and specific queries in F110.
Pls assign points if this info was helpful.
Thanks,
Vamsi -
I don't use Firefox now because of this running problem. It started about a month ago. So when I access the task manager, Firefox does not show up in the running processes. Because of this, I can't end the task. I got tired and fed up of rebooting my computer just to use Firefox, so I just switched to IE8, and Opera and Google Chrome. I prefered Firefox but it also runs so so sooooo slowly now. IE is much much faster, as are the other browsers now. Once upon a time, I bragged to everyone about how fast Firefox used to be, where now I admit I don't use it because it's so slow now and it won't run anyway.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
Maybe you are looking for
-
How do I stop Firefox from auto-focusing on text boxes?
How do I stop Firefox from auto-focusing on text boxes? Sometimes as a page is loading, I scroll down the page...only to have the page jump back to where there is a text box, with a blinking cursor, after the page is finished loading. It is an annoyi
-
What determines how a PDF or EPS file is opened??????
Hi I was wondering if anyone can tell, what determines how a PDF or EPS is opened in Photoshop. If I open a PDF in photoshop, the first thing that pops up is the settings for which you want it to open. i.e., color mode, resolution, you choose what yo
-
Why do I get an error "50" when trying to download a purchase and what can be done about it?
I've been trying (over a number of evenings, days) during the last 8 weeks to download my purchase of The Amazing Spiderman movie itunes extras. It gets so far and re-starts from where it last started and if I stop it and start it I get an error "50
-
Numbers shortcut opens in Preview at times
I had seen some thing discussed previously, but not being a computer programming expert I could not seem to understand what I needed to do to fix the problem. Along with the dilling comments back about what was being asked I will advise the problem a
-
Change Cloaking Default File Types
Hello, I've looked everywhere, and I can't figure this one out. I want to change the default file types for cloaking. Even better would be to be able to add default directory names (It's Dreamweaver--so I can dream, can't I?). Is there a way to edit