Run script remotely - RSH
I need to run a Python script every time my database is uploaded through rsync. I guess the trick is RSH, the remote shell command. I try as I think it should be, but all I get is "Connection refused". Looking at the log on the other end /private/var/log/secure.log I don't see the login was even attempted.
How do I get rsh going? Other end is a 10.5 machine.
ssh will let you run remote commands, too, and that's easily and directly enabled on most any recent Mac OS X configurations, and that can use (your own or commercial) certificates for authentication (and avoiding the need for a password)...
If you want to enable the r-commands, you'll have to enable the rsh daemon. Details on adding rshd daemon and (if you're into the other old-school stuff) rlogin into the startup are posted around the network, and (at its simplest) that's using an editor or Lingon or some other similar tool to add the rshd plist into the launchd database.
I'd suggest using +ssh <switches> <target host> <remote command>+ for this, and that too is documented around the 'net. (Having just tested the simplest version of the command with +ssh host.example.com your-remote-command here+ and without setting up the certificates (which I would do) you can pass over most any one-liner command.)
Similar Messages
-
How to make OTM scripts to run on remote machines
Hi,
I came across lot of posts which tells how to configure OTM to connect to remote machines.
Some how i dont understand when they say stop the OATS service and configure it manually
Also to use the password for authentication manager.
What i really want to know is step by step for a layman to set up OTM to run scripts on a remote desktop and on the local with the execution being displayed (not suppressed)
How do we configure that?
Any help is deeply appreciated!! my test cases are just stuck inprogress status
Thanks
RadhikaHi Radhika,
For running Scripts from either the server or the remote machine using OTM you need to run the Agent Manager service as a console not the OATS service. For that you need to stop that service--> set the startup type as manual--> the run the ' C:\OracleATS\agentmanager\bin\AgentManagerService.exe –c AgentManagerService.conf ' command in the CMD to run this service as a console. Because this agent manager service is for OLT to communicate with its agents and works fine even if it is set to automatic or manual and started normally. Hope this helps.....
Regards,
Charles Kingsly -
Advice Required remotely running script on mulitple PC's
Ok, I need some assistance if possible. I have created my own script together with a script off the net that remotely connects to a PC on our domain and then removes the Windows OS Restore Points.I use two script to do this as it is the only way I know how to.My first script also runs the a second powershell script.Ok, my first script is this, I use PSEXEC a SYSINTERNALS tool to assistPowershellClear-HostWrite-Host ""Write-Host "The script is for creating space on the hardisk of the computer by removing all but x days of Restore Points"Write-Host$remoteComp=read-host "Please Enter the PC Name"Write-Host ""$sourcePath=read-host "Enter the source path of the DeleteRestorePoints Script"Write-Host ""$ScriptName=read-host "Enter in the name of the script ie DeleteRestorePoints.ps1"$remotePath= "\\$remoteComp\c$\temp" try { #Start Remote...
This topic first appeared in the Spiceworks CommunityYou need to be developing this code as part of a LabVIEW Real-Time Project, with your remote PXI identified (in the Project) as the target of the DAQmx VI. Note that the code for this VI is still on your PC, but when you open the Project, you drag it from the My Computer section into the Remote Target section. Once you've done this, you can "deploy" to download your code to your PXI. You can then, while still connected, run the VI remotely, with probes in place to ensure that it is "doing the right thing".
Are you already doing this? If so, does it look like the code deploys correctly? Can you run it remotely from the Project Explorer?
Bob Schor -
Hi,
at the company i work for , we started using the Flash Media
Server. Nice stuff, got it up and running.
Now there is an issue. Is it possible to run a remote script
that resides on the same server as FMS? It's for the following
scenario :
A user uploads an flv-video, and after he presses save, that
video needs to be distributed amoungst other servers in different
countries. We've got the script read that will wait until it is
executed and that copy the given file around.
So i'm wondering if there is a way in server-side
actionscript to make a call to a script outside of FMS. Something
like External(scriptname,arguments) or such. Is this possible in
FMS?No, you would need to call a PHP/ASP/CFM server side file to
do that. You can do that with the loadVars object. -
Assistance with my script to find all opened windows (applications running) on remote computer
Hello,
I have the following script whereby I want to list all the running (opened) applications on a remote computer. It's a shared computer between two people who use the same generic ID. Before one RDP's into it, I thought it would be interesting
to see if any apps are opened before logging in.
Here is the code:
$cred = Get-Credential
Invoke-Command -ComputerName server123 {Get-Process *mail* | Where {$_.MainWindowHandle} | Select Name,MainWindowTitle} -Cred $cred
It works in that it asks for my credentials and runs without any error...but this script also does not display any running applications. I'm not sure what it should show. Perhaps I need to add a line of code to display what it found?
Another bit of info I would like to use in this script is to also confirm that the generic ID is logged in at the time I run this script. I could use the following bit of code:
get-wmiobject Win32_ComputerSystem -computername server123 | format-table -property username
But when I run this code I get an access denied message. I'm assuming I need to use the Get-Credential again from my first script, but I'm unsure how to use it in the get-wmiobject?
Any help you can provide would be greatly appreciated.
Thank you.Ok...shifting gears again. Instead of running this remotely I'm thinking of running a scheduled task on the server and creating this .htm file. That way no one has to run and enter in credentials (and if entered wrong cause issues with locking
out the account). So, I've modified my script and confirmed that when I run it from Powershell when logged into the server, the results file correctly shows the logged in userid and the running applications (windows) I have opened.
But, when I run this same exact script from my task scheduler, the running applications piece is blank? The server I'm running this on is Windows Server 2008. I've tried running it from Task Scheduler using Powershell and from a .bat file that
calls my Powershell script. Both ways results in my .htm file not showing any applications running. Yet when I run the same script (either from Powershell or the .bat file) the .htm file correctly shows the running applications. My Task Scheduler
Job is using the same user id that I'm logged in with so there shouldn't be any permission issues with running from the task scheduler.
Here is my code:
$a = "<style>"
$a = $a + "BODY{background-color:peachpuff;}"
$a = $a + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TH{border-width: 1px;padding: 0px;border-style: solid;border-color: black;background-color:thistle}"
$a = $a + "TD{border-width: 1px;padding: 0px;border-style: solid;border-color: black;background-color:PaleGoldenrod}"
$a = $a + "</style>"
get-wmiobject Win32_ComputerSystem | ConvertTo-HTML -head $a -body "<H2>Logged in UserID</H2>" -property username | Out-File C:\Powershell_Scripts\Test.htm ; Get-Process |where {$_.mainWindowTItle} |Select-Object name,mainwindowtitle | ConvertTo-HTML -head $a -body "<H2>Open Applications</H2>" | Out-File C:\Powershell_Scripts\Test.htm -Append
Can anyone tell me what might be the reason for the script running from the scheduled task having issues?
Thank you. -
Hello,
I have already scenarios with scripts.
All the script right now locates in the xi server.
I'm looking for the way to run script in other computer then XI server.
Thank you
EladHi,
What OS are your servers running ? UX, a rsh-like would be the most obvious solution (or a more secured remote feature, ask your admins about that) ... For windows, I know there is a sysinternal tool that allows you to invoke scripts remotely ...
Rgds
Chris -
How to Use synchronous RFC calls during test run for remote accesses
there is a Setting for the usage of RFC accesses from a tested system
using eCATT.
'X' - Use asynchronous RFC calls during test run for remote accesses
' ' - Use synchronous RFC calls during test run for remote accesses
I developed an eCATT as following :
SAPGUI ( SAPGUI_1 , Target_system_1 ).
SAPGUI ( SAPGUI_2 , Target_system_2 ).
My question is how to run the eCATT in a synchronous RFC calls
PS: I do not want to change the Target_system to the same one in the
above script of ecatt.Because I need to run it in 2 different Target
systems sometime.
for example, I give a Target_system_3 when run this eCATT
I want the SAPGUI_1 and SAPGUI_2 run the Target_system_3 but not the
Target_system_1 or Target_system_2 .
Could you please tell me how to make it without the changes in script?
Edited by: Weitong Liu on Mar 24, 2011 9:44 AMHi Liu,
Weitong Liu wrote:
> ' ' - Use synchronous RFC calls during test run for remote accesses
This is the standard option value. Asynchronous are not the standard way and used only for very special purposes.
Weitong Liu wrote:
> I developed an eCATT as following :
> SAPGUI ( SAPGUI_1 , Target_system_1 ).
> SAPGUI ( SAPGUI_2 , Target_system_2 ).
> My question is how to run the eCATT in a synchronous RFC calls
The commands will be executed in sequence. So each call will be synchronously replayed against TS1 and TS2.
What is you issue with this standard procedure?
Kind regards,
Christoph -
How to launch and run script against safari using selenium webdriver
I am trying to launch and run my selenium webdriver script using safari but its launching safari but not running script. Its throwing belwo error message..
org.openqa.selenium.remote.UnreachableBrowserException: Failed to connect to SafariDriver after 50052 ms
Build info: version: '2.33.0', revision: '4e90c97', time: '2013-05-22 15:33:32'
System info: os.name: 'Windows 7', os.arch: 'amd64', os.version: '6.1', java.version: '1.7.0_25'
Driver info: driver.version: SafariDriver
at org.openqa.selenium.safari.SafariDriverCommandExecutor.start(SafariDriverComman dExecutor.java:113)
at org.openqa.selenium.safari.SafariDriver.startClient(SafariDriver.java:112)
at org.openqa.selenium.remote.RemoteWebDriver.<init>(RemoteWebDriver.java:110)
at org.openqa.selenium.remote.RemoteWebDriver.<init>(RemoteWebDriver.java:115)
at org.openqa.selenium.safari.SafariDriver.<init>(SafariDriver.java:83)
at org.openqa.selenium.safari.SafariDriver.<init>(SafariDriver.java:73)
at LinkText.setUp(LinkText.java:38)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.jav a:47)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java :12)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java: 44)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:24)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:271)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:7 0)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:5 0)
at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238)
at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53)
at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229)
at org.junit.runners.ParentRunner.run(ParentRunner.java:309)
at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestRefere nce.java:50)
at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunne r.java:467)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunne r.java:683)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.jav a:390)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.ja va:197)Hey Reese
You bailed me out, dude! Apparently, my difficulties stemmed from me trying to directly edit /var/cron/tabs/root with pico. Never seemed to bother the other stuff, but it did this time. I am totally inept with vi, the default editor for crontab -e, which is why I had cheated before, and directly edited the /var/cron/tabs/root, el.al., so I had to find out how to
export EDITOR='pico'
in my .bashrc
After having done that, no problem, except for a latent programming logic bug that has reared its ugly head (my script is doing some date manipulation with today's and yesterday's date, and my script crashed and burned on the month change and with stuff related to single-digit date sequence numbers <10).
But, hey, I learned how to reset my default editor, so as to make life easier for me when it comes time to dorking with crontab files, and I learned that when the crontab file says "DO NOT EDIT THIS FILE - edit the master and reinstall," it means it!
Thanx for the troubleshooting hint. -
Can sign into icloud but wont let me in . says wont open due to lond running script . any ideas thanks
Restart your PC and try again.
-
Run Script action not working when verifying bundle
I have a critical "Run Script" action in a bundle. When verifying the bundle, the script doesn't seem to run and the verify action hangs indefinitely.
I see the following lines in the ZCM Log:
Code:
[DEBUG] [07/21/2011 19:05:48.670] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Found script engine cmd.exe. Not using it since cmd.exe does not take parameters.] [] []
[DEBUG] [07/21/2011 19:05:58.311] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Run Script Action - Ended - 7:05:58 PM] [] []
nothing else is logged after those 2 lines. It seems like ZCM decides not to run the script for some reason, but is still waiting for it to complete? Or is it possible that it has moved onto the next action, but it is hanging there and not reporting it to the log?
I have no time to troubleshoot right now, will do so in depth tomorrow. Just wanted to get this posted in case anybody has a clue.Nevermind, the next action is running, and that is what is hanging, which I doubt is Zenworks fault... Time for some more troubleshooting.
-
"Run Scripts" giving a problem to create portal domain
Hello All.
I am new to weblogic portal development. Was trying to create my basic sample portal in weblogic_portal_10.3.4 with the help of documentation. I am getting in running scripts when I was creating the domain. I have followed the below steps, please help me if you find any issue with my steps.
1. downloaded Weblogic_Portal_10.3.4 and installed in my windows 7 environment.
2. launched eclipse for weblogic portal.
3. opened portal prospective in eclipse.
4. right click on server tab and selected "Oracle WebLogic Server 11gR1 (10.3.4)"
5. opened "Domain Configuration Wizard"
6. Selected "Create a new Weblogic domain" radio button.
7. in the next screen for "Generate a domain configured automatically to support the following products"
selected "Weblogic Portal 10.3.4" radio button
8. in the next screen given the domain_name
9. in the next screen provided the password/confirm-password for administrator user
10. in the next screen selected JRocket SDK and development_mode for my domain.
11. in the next screen just left all the default configuration for the datasources. ( non of the datasource is selected in their check boxes)
12. in the next screen just clicked on "Next" button and "OK" on my popup
13. in this screen "p13nDataSource" is selected on my left top window area, All 3 SQL Files are selected for loading database.
Clicked on *"Run Scripts"*
At this point i am getting an error saying : "CFGFWK-60839: Database Load Failed!"
java.lang.Exception: SQLException when executing file file:/C:/Oracle/Middleware/wlportal_10.3/p13n/db/derby/seq_drop_tables.sql
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:183)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1673)
Caused by: java.sql.SQLNonTransientConnectionException: java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
at org.apache.derby.client.am.SQLExceptionFactory40.getSQLException(Unknown Source)
at org.apache.derby.client.am.SqlException.getSQLException(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:272)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
... 1 more
Caused by: org.apache.derby.client.am.DisconnectException: java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
at org.apache.derby.client.net.NetAgent.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.newAgent_(Unknown Source)
at org.apache.derby.client.am.Connection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection40.<init>(Unknown Source)
at org.apache.derby.client.net.ClientJDBCObjectFactoryImpl40.newNetConnection(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:273)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1674)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:206)
at org.apache.derby.client.net.OpenSocketAction.run(Unknown Source)
at org.apache.derby.client.net.NetAgent.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.newAgent_(Unknown Source)
at org.apache.derby.client.am.Connection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.client.net.NetConnection40.<init>(Unknown Source)
at org.apache.derby.client.net.ClientJDBCObjectFactoryImpl40.newNetConnection(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at com.oracle.cie.domain.jdbc.JDBCConnectionTester.createConnection(JDBCConnectionTester.java:272)
at com.oracle.cie.domain.jdbc.JDBCDataLoader.load(JDBCDataLoader.java:154)
at com.oracle.cie.wizard.domain.gui.tasks.JDBCConfigGUITask$LoadDatabaseThread$1.run(JDBCConfigGUITask.java:1673)
CFGFWK-60839: Database Load Failed!
Please help me if you find any problem with the steps that I am following to create my weblogic_portal_domain.
I was following the steps mentioned at : http://docs.oracle.com/cd/E15919_01/wlp.1032/e14252.pdf to create my domain to start portal development.Those are the WLP 10.3.2 instructions. But, the 10.3.4 instructions in the tutorial (http://docs.oracle.com/cd/E26806_01/wlp.1034/e14252/setup_dev_env.htm#i1014619) are wrong, too.
In 10.3.4, with derby, Run Scripts doesn't work any longer; it should still work the other database (Oracle, SQL Server, etc.). Instead, for derby, just create the domain, accepting any warning dialogs about databases that come up. After that finishes, in the domain directory, run create_db.cmd (on windows) or create_db.sh (on *nix and Mac). It should create the derby database files in the domain, and include everything needed.
I'll send a note to get the docs updated.
Greg -
hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix thisSome ideas.
https://discussions.apple.com/message/20034600#20034600 -
Can't access icloud due to long running script
keep getting this error message when logging on to icloud to access my email:
can't access icloud due to long running script
And if I do get logged into icloud and try to open the email application I can't open my email or any other applicationii.
HELPWelcome to the Apple Community.
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger -
Firefox hangs (becomes unresponsive) when accessing many sites including Gmail. Eventually, when hung, Firefox will throw up a window saying "WARNING: A script has become unresponsive" or, in the case of Gmail, the page itself will say "Some Gmail features have failed to load due to an internet connectivity problem."
IE8 and Google Chrome are working normally. I've tried Firefox in safe mode, re-installing and even running Firefox portable from a USB thumb drive. Each time with the same result—Firefox hangs or becomes unresponsive while it waits for most pages to load or run scripts.
#### PC Workstation Environment ####
Firefox 13.0.1
Windows 7
Symantec Endpoint Protection 11.0.6200.754
--Your problem sounds like the one that a co-worker and I started to have about the same time. Check your Symantec client management control log. You might see a line like the following.
Date and Time Severity Level Action Test / Production Description API Class Rule Caller Process ID Caller Process Parameter User
2012-07-30 10:48:09 AM 15 Block Production Unauthorized NT call rejected by protection driver. System Built-in rule 1608 FlashplayerPlu FuncID-B6H, R... None
At first we thought that it was a Javascript problem until we noticed this log. The key words are 'Block' and 'FlashPlayerPlu'. This problem recently started for us, perhaps with a software push 1-2 weeks ago. Internet Explorer does not hang when accessing pages with Flash.
The Flash page does eventually load after a long time. However, since the whole browser hangs for a while, for the most part having the Flash plugin enabled makes Firefox unusable if accessing pages with Flash.
Disabling the Flash plugin solves the hanging problem, but I do not know what is causing the problem, nor do I know when a combination of Windows 7, Flash, and Symantec will work. Your later version of Symantec shows that we might have the problem for a while, but I do not know what customization CSC did with Symantec. My coworker did run a complete virus scan, uncovering nothing. Another co-worker is running Windows XP. She does not have the problem, but I do not know what other versions of software she is running.
Symantec Endpoint Protection version 11.0.6100.645
Flash version 11.3.300.268
Firefox version 14.0.1
Windows 7 32-bit service pack 1 -
Script Alert "You should only run scripts from a trusted source."
I created a small javascript which opens Photoshop and resizes some images.
I want to be able to double-click the .JSX file from Windows Explorer, and have Photoshop execute the script. Likewise, I want to be able to run the .JSX file from the command line.
The script runs perfectly. However, the problem is that I don't want any user interaction. I want to be able to run the script from the command line without the user having to click anything. What happens now when I try to run the file from Windows Explorer of the command line is, I get a Script Alert with the following text:
You are about to run a script in Adobe Photoshop CS3. You should only run scripts from a trusted source. Do you want to run the script? Yes/No
Is there any possible way to bypass this message or to answer in the affirmative?
Thanks,
Jamie L.Hi... Sorry to revive such an old thread,
Does anyone know the "trusted source" folder for MAC CS4.
EDIT!
My bad. "The /users/<user_name>/documents/Adobe Scripts" folder is working for this purpose for me. I needed a path to it and forgot that the ~ resolves to the current user. Sweet.
-Bill
Maybe you are looking for
-
Transition Problems in Full Screen View
Hi. I've created a Powerpoint presentation on the Bayeux Tapestry which I now want to convert to a PDF document so that I can add multimedia. My Powerpoint presentation features photographs of a section the tapestry with each photograph placed on a s
-
TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report
Hi all, . We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date da
-
Hi Guys My client has sales employees in KY. 1. The Employee lives under zip code 41011 2. Work Tax area : KY0F u2013Kenton ( County) 3. Residence Tax Area : KY2Y u2013 Park Hills (city) 4. When I run payroll of this employee, on
-
Hi, I want to learn J.D.Edwards enterprise one 9.0, I have a Win XP with 2Gb memory, I found in Oracle e-delivery there's the standalone edtion to install, around 2G to donwload. there's a windows edtion as well as an oracle database edtion, which on
-
3.4: keyword auto-completion not working for multiple levels
Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC). Example: I enter in the "Click here to add keywords" field: "He" then LR tries to complete the keyword by showing keywords starting with "He". Fine. But th