Run time error in org sructure report
Hi All,
I am trying to execute org structure report s_ahr_6106493 with evaluation path BOSS_OE (Standard SAP evaluation path). The report fails on run time error. It looks like there is e recursion that causes that but I checked the data carefully & I don't have a recursion.
Did it happen to anyone? Any suggestions for solution?
Thanks a lot!
Hagit
Hi,
f.e. you have to call OOAW
copy way O-O-S-P
5 O B 002 ist Linien-Vorgesetzter v * O
10 O B 003 umfaßt * S
20 S A 008 Inhaber * P
to Y-O-O-SP
5 O B 002 ist Linien-Vorgesetzter v * O
10 O B 003 umfaßt * S
20 S A 008 Inhaber * P
30 O B 012 wird geleitet von * S
Regards
Bernd
Message was edited by:
Bernd Köhn
Similar Messages
-
Run time error in all standard reports
Hi
Gurus
I got a run time error in all standard reports and error as below.
Unable to fulfil request for 8296200 bytes of storage space.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
plz reply urgently.
Thanks in advance
Regards,
saranghmmm well reports work with variables and internal Tables.
Those use memory. to be more specific RAM.
in your case there would be about 8 MB of Memory needed, which you aint got.
The problem may be that there just isnt that much available, or that one dialog work process is limited to some number below that.
in anyway like all my precedessors told yah, contact you basis guys to check whether this is a problem or not. -
I get run time error in step Set Report in reportgen_xml sequence
I get run time error in step "Set Report" in reportgen_xml.seq. The error code is "Out of memory".
I don't know what to do.
I use BatchModel, I have 6 batch loops. The problem appears on the 3d loop. I have NI 3.5.
Help me!!!!!!
I send attachment (screen of error).
Attachments:
problem.jpg 106 KBHi Terry, it happened again :-(
Actually I see that the problem appeares in the same subsequence of my sequence. In that subsequence I have approximately 25 numeric steps, 6 of them are on skip now.
The problem appeares suddenly after many batch loops. I have the message "Error, Parameter new value: Out of memory. [Error code -17000, out of memory].
After that on next loop I see it runs and writes reports for others subsequences and steps, but on the "problem subsequence" again I get message "Out of memory"...
At the one of the problem loops I saw other message "An error occured calling 'Process One Result' in ITSO FlyReportGen of TestStand on-the-Fly-Report-Generator. Out of memory. Source: TSOTFRG [Error Code: -17000, Out of memory].
I use "Discard Results or Disable Results " enable option in the ModelOptions. But without success. Is this a problem of TestStand or may be is this the special problem of my subsequence or any step in that subsequence? -
Run-time error '13' in ALV report
Hello,
In a standard ALV report we are using Excel report layout. The Excel contains a table and a graph. The excel table refreshes with no errors.
In order to refresh the graph data we recorded a VB Macro but when we run the report (which runs the macro) we are getting the error:
run-time error '13'
When we open the excel report from our workstation (not trough the SAP system) we are not getting this error.
Please Advice,
Amirhi
this is a bug(error )in microsoft excel:
Run-time error:'13' Type Mismatch" error message when you click a macro or a function on a menu in Excel 2002
Please chec kthis link for the details:
http://support.microsoft.com/kb/821292
Regards
Neha -
Run Time Error while generating PDF report
Hi
I am generating reports in PDF format using JClass and JDK 1.3.The code works absolutely fine in windows environment.
But when I try to run the same code in Unix environment on Solaris, I get the following error. What could be the reason?
ERROR :-
Exception in thread "main" java.lang.IllegalAccessError: try to access method sun.java2d.SunGraphics
Environment.initializeProps()V from class sun.java2d.SunGraphicsEnvironment$1
at sun.java2d.SunGraphicsEnvironment$1.run(SunGraphicsEnvironment.java:89)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.<init>(SunGraphicsEnvironment.java:83)
at com.eteks.java2d.PJAGraphicsEnvironment.<init>(PJAGraphicsEnvironment.java:66)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:53)
at java.awt.Font.initializeFont(Font.java:259)
at java.awt.Font.<init>(Font.java:293)
at com.klg.jclass.page.FontBase.<init>(FontBase.java:83)
at com.klg.jclass.page.adobe.postscript.FontPS.<init>(FontPS.java:161)
at com.klg.jclass.page.adobe.postscript.AFMParser.parse(AFMParser.java:170)
at com.klg.jclass.page.FontBase.loadFonts(FontBase.java:114)
at com.klg.jclass.page.FontBase.getFonts(FontBase.java:155)
at com.klg.jclass.page.adobe.postscript.FontPS.getAllFonts(FontPS.java:898)
at com.klg.jclass.page.adobe.pdf.JCPDFPrinter.<init>(JCPDFPrinter.java:119)The problem is in the PJA toolkit.
Please see their index.html that comes with PJA distribution. Specifically section:
"Why the Java Virtual Machine crashes when I use fonts on UNIX platform ?" -
Run time error while printing ALV report
Hi,
At the time of printing a report output we get a dump GETWA_NOT_ASSIGNED.
The printer used here is LOCL.
The length of the report increases dynamically according to no. of months given in range.
In report , there are 3 static columns & no. of columns increases by 2 for each month. System is printing the report for 1 month ie. (3+2) columns . but if no. of months increased to 2 ..... no. of columns also increases by 2.... in this case system is giving dump.
Please help.
Thanks in advance,
VijetaHi
1. check the fieldcat ( ie. CURR field without WAERS field.. )
2. check if you want to use colours at calling the ALV.. but you don´t fill the deep structure for the colours...
bestreg Robert -
Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query
I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
Run-Time error '-2147417848 (80010108)
Automation error
The object invoked has disconnected from its clients.
CR exits after this error message.
I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
Anyone ever had this?
Thank you,
R.Is this still an issue?
-
Run time error while executing Project Info system Reports
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan -
Run time Error while executing Project Info system Reports (CN41/CN41N)
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan -
Run-time error while executing alv grid report
Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER_1
EXPORTING CONTAINER_NAME = CONTAINER_1.
CREATE OBJECT GRID1
EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING I_STRUCTURE_NAME = 'VBAK
CHANGING IT_OUTTAB = IT_VBAK.
Reward points if useful. -
Run time Error while executing project infosystem reports (CN41/41N)
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
Martina Modolell -
XL reporter launching in SAP 8.81 PL:00: run time error
Hello experts,
We have a customer who is on SAP 8.81 PL:00.
They are trying to use XL reporter but when they try using XL reporter, they get:
Run time Error 91
The system then freezes.
Have checked they have Microsoft.net 1.1 which they do and that they have the correct excel.exe config file which they do.
Any suggestions or known faults with 8.81?
Thank you in advance,
AndyHi Andrew,
'Object reference not set to an instance of an object ' is a known error, this usually happens because there was a previous install of the same add on which was not uninstalled completely. This can cause the error.
I would suggest you to go through sap notes 1247315, 1287193. These all suggests about run time errors, cleaning registry files and clean install etc.
Hope it helps
regards
Johnson -
Run time error in report for a particular month : " TIME_OUT"
hi frends, we have developed a report for PM module in SAP. it is a monthy report. and user have to enter the month for which he wants to see the report. we are facing runtime error for a particular oct. and nov month of 2009 only , all other months are working fine. The error is :
The program "ZPMR_EQUP_PERFORMANCE_REPORT" has exceeded the maximum permitted
runtime without
interruption and has therefore been terminated.
what could be the reason.Hi Achalmehra,
By seeing the run time error "TIME_OUT", I suspect this is due to Performance issue.
There is a chance that they had huge data dump into PM server from other servers and there is also chance that
They have many records available for these 2 months.
IN any case, please chk with Run time analysis (SE30) by executing your program...
If it displays the graph more than 30 % for Database then it is an issue with the Performance.
Also chk with SQL trace.....
Second case :
Check you had not used Nested Loops, Select queries in Loop.
Make sure you use Binary search for Read Statements....
Third : Chk with the runtime error at which place of the code it is throwing Time_out error at Source code extract.
To help you further, please paste your code here and also paste the Run time error that you receive with the select queries.
Regards,
Kittu -
KE30 Report:-Takes very long time and ends in a Run time error
Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin TiwariHI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari -
ABAP Run time Error whle executing the Balance sheet report in FGI0
Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors MESSAGE_TYPE_X
Date and Time 06/12/2009 15:17:17
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
RAISE RKD_CONDITION_READ (internal error)
Long text of error message:
Diagnosis
The program was terminated because a situation occurred which
should not have arisen.
Procedure
Analyze the situation and contact SAP.
Technical information about the message:
Message class....... "KH"
Number.............. 299
Variable 1.......... "RKD_CONDITION_READ"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLKYPR
Include LKYPRU31
Row 36
Module type (FUNCTION)
Module Name RKD_CONDITION_READ
Thanks
SupriyaHello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi
Maybe you are looking for
-
Adobe Reader Updqte Error 1500 Win 7 64-bit
PC is running on Windows 7 Ultimate 64-bit. While on Adobe Reader 9.3.1, I received a prompt that indicated an update was available. The update failed, error 1500. I rebooted and tried again. Same error. I rebooted a second time into Safe Mode wit
-
Open external browser in SAME window
Hi all. I've seen several posts on a related issue here about how one could open up an external web browser to display content in the browser window. I tested the solution which uses a call to Runtime.getRuntime().exec(...) to execute a new Process a
-
JSF 2.0 f:ajax: How to limit what is sent in AJAX request?
Is there a way in JSF 2.0 with f:ajax (or direct JavaScript equivalent) to limit what parts of a form are sent in AJAX request, like it's counterpart f:ajax render attribute which limits what is returned back from AJAX request. When f:ajax execute at
-
when i connect my iphone to my laptop my itunes isnt acknowledging it but its showing that i have the driver installed i cant figure out why i cant sync
-
Hi there, Just wondering why, when i do show arp, in my WS-C4506, whith Supervisor II+ 1000BaseX, and cat4000-i9k91s-mz.122-25.EWA5.bin, it seems that i have +/- 20 % of arp entrys with the aging time of 0 sec all the time. I think it should incremen