Run time error iview 'Leave Overview' in ESS - Pl Help
Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddy
Edited by: Sunitha Reddy on Mar 26, 2008 9:47 AM
Hi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha
Similar Messages
-
Run time error when we click "Leave overview " in ESS - pl help
Hi Gurus ,
We are getting run time error when we
click the 'Leave Overview' in
ESS.
when emloyee applies for leave he may
need to wait for aproval during
that time he cannot access the 'leave
overview' screen he will be
facing run time error .
because of this run time error system
performance become very slow .
please help me .i will give points for valid answers .
:-Suneetha reddyHi ,
I am soory for late reply ,
I changed the runtime parameter to 1200 and monitaring the system .
Now there is no Run time error but still Leave overview is taking time .
Please help
Thanks,
Sunitha -
How do i fix it
Hi 8tharmy,
It's hard to tell what this error triggered, Best approach will troubleshooting the issue and narrow down to the root cause. Best KB provided by Adobe you find here.
Windows: https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Mac: Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
If you like help please share some additional information in this topic or share the result and the issue statement with Adobe support. Learn & Support -
Since updating to firefox 15. whatever and now 16.0.1, i have been unable to open up any email attachments in my aol email account. I am able to view them via internet explorer. Initially the attachment will open (i can see it) but then a message of "run time error" comes up and when I close that window, the document goes blank. Also, today I clicked on a link via an aol news story and the same thing happened. It went to my firefox downloads, I was able to see part of the document and then that window with "run time error" message in it popped up. Help!!!!
This is a tip I got from ehow.com:
"While less common in Firefox, runtime errors can still occur on that browser. To prevent it from happening again, merely uninstall and reinstall Firefox on your computer." -
How do I fix this run time error crash on start up?
Whe I start Elements 10, it stops and waits at the "Organize" or "Edit" choice. (normal operation.) I chose edit and it crashes with a C++ run time error.
See if this Adobe troubleshooting document helps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Ken -
How to display "Non-Fatal Run-Time Error In Function Panel" dialog?
I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
Attachments:
ErrorDialog.png 8 KBHi Shawn,
Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
My IVI-C specific driver is behaving identical to the hp34401a specific driver.
In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help! -
Portal Run time error in MSS iView
Hi,
I am getting portal run time error in MSS iView when i am navigating MSS>Online form>People related form and clicking on the employee name in the table which has hyper link. How to remove the hyper link from the employee name?
When i am selecting the same employee from radio button and clicking on To Form Selection button ,it's working fine.
Someone can help me to resolve this error.
Thanks,
KundanStill my question is open. Someone can provide the solution for the same?
Thanks,
Kundan. -
Hi All
Please help, I have recently got a new PC and reinstalled Contribute CS3. I had to update to MS Service Pack 3 due to other software requirements.
I previously had some shockwave files saved on to pages within my site, however each time i now try to update the pages with any shockwave file on the page, I get the following.
A Run Time Error has Occured
Do you wish to debug?
LIne '0'
Error 'Null' is Null or not an object.
With an option of YES or No
If I press 'No' I end up in a continous loop and end up having to carry out an End Task.
If I press 'YES' I end up In Microsoft Script Editor with the code below
try { document.getElementById("").SetReturnValue(__flash__toXML(getFlashLogLevel("xcelsius")) ); } catch (e) { document.getElementById("").SetReturnValue("<undefined/>"); }. There is no way of editing the code and I still end up ending the task.
Could anyone tell me if this is related to the installation of Serive Pack 3 or is there something more sinister going on.
Thanks fior reading and any adive would be gratefully received.
Thank
LukeHi Krishna
Thanks for your reply, it was while trying to "edit" the page containing the shockwave file however it’s a bit of a strange one, as When I reposted this post , I had been experiencing the problem for about a week. I then went on leave for a week and when I returned it started working again???. I queried with my IT department if anything had changed or been updated but they could not think of anything.
So for now it's working, but if you have any thoughts on what may of happened I would appreciate any suggestions?
Thanks again
Luke -
Run time error while executing KP06
Hello All,
A run time error is being returned when I execute the tcode KP06. After entering all required field such as cost elements, cost center / CCgroup, then I pressed period screen / overview screen ... and it went to abap dump ...
FYI, I have upgraded to 4.7 to ECC system.
Regards,
Bharath.
Moderator message: please do more research before asking, use ST22, search for SAP notes, check your custom enhancements.
Edited by: Thomas Zloch on Aug 22, 2011 9:58 AMOk. Look at the dump in ST22 and solve your problem.
-
Run time error in Portal (BW 7 version)
Hi,
I am using BW 7 for generating a graph.i am using web application designer where i will give the name of query
which is generating a report that consists of graph.
then i am pasting the link of above report into a portal(iview)...later when i will see the portal,sometimes i can see the report(graph) but some times i get an error without graph saying that
"A run time error has occured.Do you wish to debug?
Line 7: Error: Undeterminated String constant"
Please tell me the solution.Can you provide exception details logged in your trace file ?
Thanks
MMK -
We are geting following run time error when executeing QA32 t-code of QM , error as follows ,
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
How to correct the error
Programs with long runtime should generally be started as background
jobs. If this is not possible, you can increase the system profile
parameter "rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has unsuitable index: Check index generation.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"SAPLBSVA" or "LBSVAU14"
"STATUS_PRE_READ"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "GALT"
Network address...... "202.54.13.238"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 8 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GALT"
Database type..... "ORACLE"
Database name..... "PRD"
Database user ID.. "SAPSR3"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Oct 13 2006 00:08:41"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 80
Patch text.. " "
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8112
EM...... 16724736
Heap.... 0
Page.... 450560
MM Used. 6688784
MM Free. 626280
User and Transaction
Client.............. 400
User................ "MGMTSER"
Language key........ "E"
Transaction......... "QA11 "
Program............. "SAPLBSVA"
Screen.............. "SAPMQEVA 0200"
Screen line......... 41
Information on where terminated
Termination occurred in the ABAP program "SAPLBSVA" - in "STATUS_PRE_READ".
The main program was "SAPMQEVA ".
In the source code you have the termination point in line 61
of the (Include) program "LBSVAU14".
Source Code Extract
Line SourceCde
31
32 OBJNR_TAB[] = JSTO_PRE_TAB[].
33
34 * Merken: jeweils bisherige Anzahl Einträge im Puffer
35 DESCRIBE TABLE JSTO_BUF LINES JSTO_BUF_LINES.
36 DESCRIBE TABLE JEST_BUF LINES JEST_BUF_LINES.
37 DESCRIBE TABLE OBJNR_TAB LINES OBJNR_TAB_LINES. "Note978655
38 ADD 1 TO JSTO_BUF_LINES.
39
40 l_percentage = OBJNR_TAB_LINES * 100 / JSTO_BUF_LINES. "Note978655
41 * Small number of object numbers to be read, insert records "Note978655
42 * sequentially to avoid expensive SORT on JSTO_BUF,JEST_BUF "Note978655
43 IF ( l_percentage <= 1 OR OBJNR_TAB_LINES < 20 ) AND "Note978655
44 get_change_documents IS INITIAL. "Note978655
45 LOOP AT objnr_tab. "Note978655
46 SELECT * FROM JSTO CLIENT SPECIFIED "Note978655
47 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
48 WHERE MANDT EQ CLIENT "Note978655
49 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
50 READ TABLE JSTO_BUF WITH KEY MANDT = JSTO-MANDT "Note978655
51 OBJNR = JSTO-OBJNR "Note978655
52 BINARY SEARCH. "Note978655
53 IF SY-SUBRC <> 0. "Note978655
Runtime Errors TIME_OUT
Date and Time 30.06.2009 10:17:31
Short dump has not been completely stored (too big)
54 JSTO_BUF = JSTO. "Note978655
55 CLEAR JSTO_BUF-MOD. "Note978655
56 JSTO_BUF-STSMA_OLD = JSTO_BUF-STSMA. "Note978655
57 INSERT JSTO_BUF INDEX SY-TABIX. "Note978655
58 ENDIF. "Note978655
59 ENDSELECT. "Note978655
60 "Note978655
>>>>> SELECT * FROM JEST CLIENT SPECIFIED "Note978655
62 FOR ALL ENTRIES IN OBJNR_TAB "Note978655
63 WHERE MANDT EQ CLIENT "Note978655
64 AND OBJNR = OBJNR_TAB-OBJNR. "Note978655
65 READ TABLE JEST_BUF WITH KEY MANDT = JEST-MANDT "Note978655
66 OBJNR = JEST-OBJNR "Note978655
67 STAT = JEST-STAT "Note978655
68 BINARY SEARCH. "Note978655
69 IF SY-SUBRC <> 0. "Note978655
70 JEST_BUF = JEST. "Note978655
71 CLEAR JEST_BUF-MOD. "Note978655
72 JEST_BUF-INACT_OLD = JEST_BUF-INACT. "Note978655
73 INSERT JEST_BUF INDEX SY-TABIX. "Note978655
74 ENDIF. "Note978655
75 ENDSELECT. "Note978655
76 ENDLOOP. "Note978655
77 CLEAR: JSTO_BUF,JEST_BUF. "Note978655
78 EXIT. "Note978655
79 ENDIF. "Note978655
80
Contents of system fields
Name Val.
SY-SUBRC0
SY-INDEX0
SY-TABIX15
SY-DBCNT15
SY-FDPOS1
SY-LSIND0
SY-PAGNO0
SY-LINNO1
SY-COLNO1
SY-PFKEYA101
SY-UCOMMBU
SY-TITLE Record Usage Decision: Characteristic Overview
SY-MSGTY
SY-MSGID
SY-MSGNO000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO0
SY-DATUM20090630
SY-UZEIT101723
SY-XPROGSAPLQAMB
SY-XFORMCONVERSION_EXIT
Edited by: Raghavendra Balegar on Jul 3, 2009 12:21 PMNo Dear,
Not at all. I think it should work for atleast one month period.
But sometimes depending on the database size and hardware, this criteria can vary.
Regds,
Anil -
Run time error in ALV editable
Hi Gurus
I am getting a run time error when I edit a field in the ALV report and press enter. The run time error is : GETWA_NOT_ASSIGNED. It says I tried to access an unassigned field symbol. I have not used any field symbols in my field catalog or anywhere. It also says that the location of the termination was : cl_gui_alv_grid .
I have to get this report working today at anycost. Any help will be very usefulYes , I have internal tables , a whole lot of them ...here is the code.
REPORT ZSCREENREPORT NO STANDARD PAGE HEADING MESSAGE-ID YE.
TABLES : VBUK ,
VEPVG ,
LIKP ,
VTTP ,
LIPS ,
LQUA ,
MAKT.
DATA : PWERKS TYPE LIPS-WERKS , PLGNUM TYPE LIPS-LGNUM.
DATA PTKNUM TYPE VTTP-TKNUM.
DATA PVBELN TYPE LIPS-VBELN.
DATA : t_toolbar type ui_functions with header line.
DATA OKCODE LIKE SY-UCOMM.
DATA S_OKCODE LIKE SY-UCOMM.
DATA B_VIEWREPORT.
DATA B_CLEARALL.
DATA B_PRINT.
DATA pr_data_changed TYPE REF TO cl_alv_changed_data_protocol.
*DATA: g_event_receiver TYPE REF TO lcl_event_receiver.
*TYPES: PR_DATA_CHANGED TYPE xxxxxx.
*TYPES: LCL_EVENT_RECEIVER TYPE .
class lcl_event_receiver definition deferred.
selection-screen begin of block b2 with frame title text-001.
selection-screen begin of block b1 with frame.
BLOCK B1 FOR FIRST SET OF SELECT OPTIONS
ALL ENTRIES ARE NECESSARY IN THIS BLOCK
SELECT-OPTIONS : S_ORG FOR LIKP-VKORG MODIF ID B1, "Sales Org
S_DISCHA FOR LIKP-VTWIV MODIF ID B1, "Dis Cha
S_DIV FOR LIKP-SPAIV MODIF ID B1, "Division
S_SPOINT FOR LIKP-VSTEL MODIF ID B1. "Shipping
"point
selection-screen end of block b1.
selection-screen begin of block b3 with frame.
*BLOCK B3 FOR PICKING DATE . THIS FIELD IS OBLIGATORY
PARAMETERS : P_DEL LIKE VBUK-KOSTK DEFAULT 'A'.
SELECT-OPTIONS : S_PICDAT FOR LIKP-KODAT OBLIGATORY ,
S_PGDAT FOR LIKP-WADAT .
selection-screen end of block b3.
selection-screen begin of block b4 with frame.
BLOCK B4 FOR SHIPMENT NUMBER / DELIVERY NUMBER. ONLY ONE CAN BE
*ENTERED
SELECT-OPTIONS: S_SHNUM FOR VTTP-TKNUM MODIF ID B2 , " Shipment
"Number
S_DENUM FOR LIKP-VBELN MODIF ID B2 . " Delivery
" Number
selection-screen end of block b4.
PARAMETERS : C_BBINS AS CHECKBOX .
selection-screen end of block b2.
RANGES : R_ORG FOR VEPVG-VKORG , "Sales Org
R_DISCHA FOR VEPVG-VTWEG , "Dis Cha
R_DIV FOR VEPVG-SPART , "Division
R_SPOINT FOR VEPVG-VSTEL , "Shipping point
R_PICDAT FOR LIKP-KODAT , " Planned Pick Date
R_PGDAT FOR LIKP-WADAT , " Planned goods issue
R_SHNUM FOR VTTK-TKNUM , " Shipment Number
R_DENUM FOR LIKP-VBELN , " Delivery Number
R_VBELN FOR VBUK-VBELN ,
R_MATNR FOR LIPS-MATNR .
DATA : BEGIN OF ITAB1 OCCURS 0.
DATA: MATL LIKE LIPS-MATNR,
QUANT LIKE LIPS-LFIMG,
UOM LIKE LIPS-VRKME,
KUNR LIKE LIKP-KUNNR ,
WERKS LIKE LIKP-WERKS,
LGNUM LIKE LIPS-LGNUM,
LGTYP LIKE LIPS-LGTYP ,
VBELN LIKE LIPS-VBELN ,
TKNUM LIKE VTTP-TKNUM.
DATA : END OF ITAB1.
DATA : BEGIN OF ITAB2 OCCURS 0.
DATA :
MATL LIKE LIPS-MATNR,
QUANT TYPE I,
UOM LIKE LIPS-VRKME,
KUNR LIKE LIKP-KUNNR.
DATA : END OF ITAB2.
DATA : BEGIN OF ITAB3 OCCURS 0.
DATA : MATL LIKE LIPS-MATNR,
QUANT LIKE LIPS-LFIMG,
UOM LIKE LIPS-VRKME,
KUNR LIKE LIKP-KUNNR.
DATA : END OF ITAB3.
DATA : BEGIN OF ITAB_VBELN OCCURS 0.
DATA : IBLN LIKE VBUK-VBELN.
DATA : END OF ITAB_VBELN.
DATA : BEGIN OF DEMANDTAB OCCURS 0.
DATA : D_MATL LIKE LIPS-MATNR,
D_MQUANT LIKE LIPS-LFIMG,
D_MUOM LIKE LIPS-VRKME,
D_QUANT LIKE LIPS-LFIMG,
D_UOM LIKE LIPS-VRKME,
D_KUNR LIKE LIKP-KUNNR.
DATA : END OF DEMANDTAB.
DATA : VMATNR LIKE LIPS-MATNR,
VKUNR LIKE LIKP-KUNNR,
VQUANT LIKE LIPS-VRKME.
DATA : BEGIN OF INVTAB OCCURS 0.
DATA : IMATL LIKE LIPS-MATNR,
IBINLOC LIKE LQUA-LGPLA,
IBATCH LIKE LQUA-CHARG,
IWARSTK LIKE LQUA-VERME,
IUOM LIKE LQUA-MEINS.
DATA : END OF INVTAB.
DATA : BEGIN OF ITABX OCCURS 0.
DATA : XMATL LIKE LIPS-MATNR,
XMATDESC LIKE MAKT-MAKTX,
XQUANT TYPE I,
XUOM LIKE LIPS-VRKME,
XBALQ TYPE I.
EXPAND.
DATA : END OF ITABX.
DATA : BEGIN OF ITABMASTER OCCURS 0 .
DATA : MMATL LIKE LIPS-MATNR,
MKUNR LIKE LIKP-KUNNR,
M_KQUANT TYPE I,
M_KUOM LIKE LIPS-VRKME,
MBINLOC LIKE LQUA-LGPLA,
MBATCH LIKE LQUA-CHARG,
MWATSTK LIKE LQUA-VERME,
M_IUOM LIKE LQUA-MEINS.
DATA : END OF ITABMASTER.
DATA : BEGIN OF ITABDESC OCCURS 0.
DATA : MATNR LIKE MAKT-MATNR,
MATDESC LIKE MAKT-MAKTX.
DATA : END OF ITABDESC.
TYPES : BEGIN OF ITABT ,
FMATL LIKE LIPS-MATNR,
FINDEX LIKE SY-TABIX,
FKEY LIKE LIPS-MATNR,
FMATDESC LIKE MAKT-MAKTX,
FQUANT LIKE LIPS-LFIMG,
FUOM LIKE ITAB1-UOM,
FKUNR LIKE LIKP-KUNNR,
F_KQUANT LIKE LIPS-LFIMG,"TYPE I,
F_KUOM LIKE LIPS-VRKME,
F_BALQUANT LIKE LIPS-LFIMG,"TYPE I,
FBINLOC LIKE LQUA-LGPLA,
FBATCH LIKE LQUA-CHARG,
FWATSTK LIKE LQUA-VERME,
F_IUOM LIKE LQUA-MEINS ,
SEL_QUANT type LIPS-LFIMG," corr_1,
END OF ITABT.
DATA : BEGIN OF FLAGTAB OCCURS 0 .
DATA : SEL_QUANT TYPE I , FKEY LIKE LIPS-MATNR.
DATA : END OF FLAGTAB.
DATA : ITAB type ITABT occurs 0 with header line .
data : itab_w like line of itab .
DATA t_layout type lvc_s_layo.
DATA: ok_code LIKE sy-ucomm .
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container.
DATA : I_SELECTED_ROWS TYPE LVC_T_ROW,
W_SELECTED_ROWS TYPE LVC_T_ROW,
I_MODIFIED TYPE STANDARD TABLE OF ITABT,
W_MODIFIED TYPE ITABT,
WA TYPE ITABT.
*field catalogs -
DATA : WA_FIELDCAT TYPE lvc_t_fcat with header line.
data : fcat type lvc_t_fcat WITH HEADER LINE .
FIELD-SYMBOLS : <FS_FIELDCAT> TYPE LVC_S_FCAT .
DATA : V_VALID TYPE C.
clear fcat.
CLASS LCL_EVENTS_D0100 DEFINITION
CLASS LCL_EVENT_receiver DEFINITION.
PUBLIC SECTION.
METHODS :
handle_data_changed for event data_changed
of cl_gui_alv_grid
IMPORTING er_data_changed.
ENDCLASS.
data : my_application type ref to lcl_event_receiver.
CLASS LCL_EVENTS_D0100 IMPLEMENTATION
CLASS LCL_EVENT_receiver IMPLEMENTATION.
METHOD handle_data_changed.
DATA: ls_good TYPE lvc_s_modi.
DATA : L_PLANETYPE TYPE LIPS-ANZSN.
data : swapper type LIPS-ANZSN .
LOOP AT er_data_changed->mt_good_cells INTO ls_good.
CASE ls_good-fieldname.
WHEN 'SEL_QUANT'.
CALL METHOD pr_data_changed->get_cell_value
EXPORTING
i_row_id = ls_good-row_id
i_fieldname = ls_good-fieldname
IMPORTING
e_value = l_planetype.
*read table itab into itab_w index ls_good-row_id.
swapper = itab_w-f_balquant - l_planetype.
move swapper to itab_w-f_balquant.
modify itab FROM itab_w .
ENDCASE.
ENDLOOP.
ENDMETHOD.
ENDCLASS.
DATA: g_event_receiver TYPE REF TO lcl_event_receiver.
INITIALIZATION.
S_PICDAT-SIGN = 'I'.
S_PICDAT-OPTION = 'BT'.
S_PGDAT-SIGN = 'I'.
S_PGDAT-OPTION = 'BT'.
S_PICDAT-LOW = SY-DATUM.
S_PICDAT-HIGH = SY-DATUM + 1.
APPEND S_PICDAT.
S_PGDAT-LOW = SY-DATUM.
S_PGDAT-HIGH = SY-DATUM + 1.
APPEND S_PGDAT.
**--VALIDATIONS--
AT SELECTION-SCREEN .
IF S_ORG IS initial AND S_DISCHA IS INITIAL AND S_DIV IS
INITIAL AND S_SPOINT IS initial AND S_SHNUM IS INITIAL AND S_DENUM IS
INITIAL .
MESSAGE E082(YE) WITH 'AT LEAST ONE FIELD MUST BE ENTERED'.
ENDIF.
DATA LV_COUNT TYPE I VALUE 0.
IF NOT S_ORG IS initial OR NOT S_DISCHA IS INITIAL OR NOT S_DIV IS
INITIAL OR NOT S_SPOINT IS initial.
lv_COUNT = 1.
ENDIF.
IF NOT S_SHNUM IS INITIAL .
LV_COUNT = LV_COUNT + 1.
ENDIF.
IF NOT S_DENUM IS INITIAL .
LV_COUNT = LV_COUNT + 1.
ENDIF.
IF LV_COUNT > 1.
MESSAGE E081(YE) WITH 'Please Enter Only in Block1 Or Block3' .
endif.
read table s_PICDAT index 1.
data: days type i.
days = s_PICDAT-high - s_PICDAT-low .
if days > 2.
message e080(YE) with 'Range can not be > 2 days'.
endif.
read table s_PGDAT index 1.
data: days2 type i.
days2 = s_PGDAT-high - s_PGDAT-low .
if days2 > 2.
message e080(YE) with 'Range can not be > 2 days'.
endif.
VALIDATIONS FOR FIRST BLOCK---------------------------------------
*IF S_SHNUM IS INITIAL AND S_DENUM IS INITIAL.
IF S_ORG IS INITIAL OR S_SPOINT IS INITIAL OR S_DISCHA IS INITIAL OR
*S_DIV IS INITIAL .
*MESSAGE E083(YE) WITH 'ALL FIELDS IN BLOCK ONE REQUIRED'.
ENDIF.
*ENDIF.
*--START OF SELECTION--
START-OF-SELECTION .
IF NOT S_ORG IS initial OR NOT S_DISCHA IS INITIAL OR NOT S_DIV IS
INITIAL OR NOT S_SPOINT IS initial.
PERFORM INPUTBLOCK1.
PERFORM TABPRINT1.
ENDIF.
IF NOT S_SHNUM IS INITIAL .
PERFORM INPUTBLOCK2 .
PERFORM TABPRINT1.
ENDIF .
IF NOT S_DENUM IS INITIAL .
PERFORM INPUTBLOCK3 .
PERFORM TABPRINT1.
ENDIF .
CLEAR ITAB2.
*LOOP AT ITABX.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = ITABX-XMATL.
APPEND R_MATNR. CLEAR R_MATNR.
*ENDLOOP.
PERFORM WARINVENTORY.
PERFORM WARMASTERUPLD.
CALL SCREEN 100.
*=====================================================
*& Module user_command_0100 input
text
MODULE USER_COMMAND_0100 INPUT.
SAVED_OKCODE = OKCODE.
S_OKCODE = OKCODE.
CLEAR OKCODE.
CASE S_OKCODE.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
LEAVE PROGRAM.
WHEN OTHERS.
call method go_grid->check_changed_data
importing
e_valid = V_VALID .
PERFORM SAVE_ITAB.
endcase.
case sy-ucomm.
when 'b_clearall'.
loop at itab.
itab-sel_quant = 30.
modify itab.
endloop.
CALL TRANSACTION 'YWMINI'.
ENDCASE.
call method go_grid->check_changed_data.
importing
e_valid = v_valid.
*LOOP AT ITAB.
*IF ITAB-SEL_QUANT NE 0.
*MOVE ITAB-SEL_QUANT TO FLAGTAB-SEL_QUANT.
*MOVE ITAB-FKEY TO FLAGTAB-FKEY.
*COLLECT FLAGTAB.
*ENDIF.
*ENDLOOP.
LOOP AT ITAB.
LOOP AT FLAGTAB WHERE FKEY = ITAB-FKEY.
ITAB-F_BALQUANT = ITAB-F_BALQUANT - FLAGTAB-SEL_QUANT.
MODIFY ITAB.
ENDLOOP.
*ENDLOOP.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
*SET PF-STATUS 'ZSTAT'.
set pf-status 'STAT'.
SET TITLEBAR 'WAVEPICK'.
*call screen 1010 .
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
set handler pr_data_changed=>on_data_changed
*for all instances.
call method go_grid->register_edit_event
exporting
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CREATE OBJECT g_event_receiver.
SET HANDLER g_event_receiver->handle_data_changed FOR go_grid.
PERFORM xclude_toolbar.
PERFORM CREATE_FIELDCAT.
PERFORM load_data_into_grid.
ENDIF.
else .
call method my_application->refresh_table_display.
endif.
*call method go_grid->register_edit_event
*exporting
*i_event_id = cl_gui_alv_grid=>mc_evt_enter.
*CALL METHOD GO_GRID->REFRESH_TABLE_DISPLAY
perform load_data_into_grid.
CLEAR ITAB1.
READ TABLE ITAB1 .
PWERKS = ITAB1-WERKS.
PLGNUM = ITAB1-LGNUM.
PVBELN = ITAB1-VBELN.
PTKNUM = ITAB1-TKNUM.
ENDMODULE. " STATUS_0100 OUTPUT
FORM INPUTBLOCK1 *
FORM INPUTBLOCK1.
SELECT LIPSMATNR LIPSLFIMG LIPSVRKME LIKPKUNNR LIPS~WERKS
LIPS~LGNUM
LIPSLGTYP LIPSVBELN INTO TABLE ITAB1 FROM
LIPS JOIN LIKP ON LIPSVBELN = LIKPVBELN JOIN VBUK ON LIKP~VBELN =
VBUK~VBELN WHERE
LIKP~VKORG IN S_ORG AND
LIKP~VTWIV IN S_DISCHA AND
LIKP~SPAIV IN S_DIV AND
LIKP~VSTEL IN S_SPOINT AND
LIKP~KODAT IN S_PICDAT AND
LIKP~WADAT IN S_PGDAT AND
LIPS~LGTYP = '001' ." AND
*VBUK~KOSTK = 'A' .
ENDFORM .
FORM INPUTBLOCK2 *
FORM INPUTBLOCK2.
SELECT LIPSMATNR LIPSLFIMG LIPSVRKME LIKPKUNNR INTO
TABLE ITAB1
FROM LIPS JOIN LIKP ON LIPSVBELN = LIKPVBELN JOIN VTTP ON LIKP~VBELN =
VTTPVBELN JOIN VBUK ON LIKPVBELN = VBUK~VBELN WHERE
VTTP~TKNUM IN S_SHNUM
AND
LIKP~KODAT IN S_PICDAT AND
LIKP~WADAT IN S_PGDAT AND
VBUK~KOSTK = 'A'.
ENDFORM.
FORM INPUTBLOCK3 *
FORM INPUTBLOCK3 .
SELECT LIPSMATNR LIPSLFIMG LIPSVRKME LIKPKUNNR INTO
TABLE ITAB1
FROM LIPS JOIN LIKP ON LIPSVBELN = LIKPVBELN JOIN VBUK ON LIKP~VBELN =
VBUKVBELN WHERE LIKPVBELN IN
S_DENUM
AND
LIKP~KODAT IN S_PICDAT AND
LIKP~WADAT IN S_PGDAT AND
VBUK~KOSTK = 'A'.
ENDFORM.
FORM TABPRINT1 *
FORM TABPRINT1.
LOOP AT ITAB1 .
MOVE: ITAB1-MATL TO ITAB2-MATL,
ITAB1-UOM TO ITAB2-UOM,
ITAB1-KUNR TO ITAB2-KUNR,
ITAB1-QUANT TO ITAB2-QUANT.
COLLECT ITAB2.
ENDLOOP.
LOOP AT ITAB2.
MOVE ITAB2-MATL TO ITABX-XMATL.
MOVE ITAB2-QUANT TO ITABX-XQUANT.
MOVE ITAB2-UOM TO ITABX-XUOM.
MOVE ITABX-XQUANT TO ITABX-XBALQ.
COLLECT ITABX.
ENDLOOP.
clear ITABX .
LOOP AT ITABX.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = ITABX-XMATL.
APPEND R_MATNR. CLEAR R_MATNR.
ENDLOOP.
SELECT MAKTMATNR MAKTMAKTX INTO TABLE ITABDESC FROM MAKT
WHERE MAKT~MATNR IN R_MATNR .
DATA C_DESC LIKE MAKT-MAKTX.
C_DESC = '0'.
LOOP AT ITABDESC .
IF ITABDESC-MATNR = C_DESC .
DELETE ITABDESC.
ELSE .
C_DESC = ITABDESC-MATNR.
ENDIF.
ENDLOOP.
LOOP AT ITABDESC.
LOOP AT ITABX WHERE XMATL = ITABDESC-MATNR.
ITABX-XMATDESC = ITABDESC-MATDESC.
MODIFY ITABX.
ENDLOOP.
ENDLOOP.
CLEAR ITABX.
*ENDSELECT.
ENDFORM.
FORM WARINVENTORY *
FORM WARINVENTORY.
*Select matnr from LQUA
into LQUA where
matnr in r_matnr.
endselect.
*if not r_matnr-low is initial .
MESSAGE E080(YE) WITH 'NOT IN RANGE'.
SELECT LQUAMATNR LQUALGPLA LQUACHARG LQUAVERME LQUA~MEINS INTO TABLE
INVTAB FROM LQUA WHERE LQUA~MATNR
IN R_MATNR AND LQUAWERKS = ITAB1-WERKS AND LQUALGNUM = ITAB1-LGNUM AND
LQUA~LGTYP = '001' AND
NOT LQUA~LGPLA = '000'.
ENDFORM .
FORM WARMASTERUPLD *
FORM WARMASTERUPLD .
LOOP AT ITAB2.
DELETE ITAB2.
LOOP AT INVTAB WHERE IMATL = ITAB2-MATL.
MOVE: ITAB2-MATL TO ITABMASTER-MMATL ,
ITAB2-KUNR TO ITABMASTER-MKUNR,
ITAB2-QUANT TO ITABMASTER-M_KQUANT,
ITAB2-UOM TO ITABMASTER-M_KUOM ,
INVTAB-IBINLOC TO ITABMASTER-MBINLOC,
INVTAB-IBATCH TO ITABMASTER-MBATCH,
INVTAB-IWARSTK TO ITABMASTER-MWATSTK,
INVTAB-IUOM TO ITABMASTER-M_IUOM.
APPEND ITABMASTER.
DELETE INVTAB.
CLEAR INVTAB.
CLEAR ITAB2.
EXIT.
ENDLOOP.
ENDLOOP.
IF NOT INVTAB[] IS INITIAL.
LOOP AT INVTAB.
MOVE: INVTAB-IMATL TO ITABMASTER-MMATL,
INVTAB-IBINLOC TO ITABMASTER-MBINLOC,
INVTAB-IBATCH TO ITABMASTER-MBATCH,
INVTAB-IWARSTK TO ITABMASTER-MWATSTK,
INVTAB-IUOM TO ITABMASTER-M_IUOM.
ITABMASTER-MKUNR = SPACE.
ITABMASTER-M_KQUANT = SPACE.
ITABMASTER-M_KUOM = SPACE.
APPEND ITABMASTER.
ENDLOOP.
ENDIF.
*-- BEGIN ITAB UPLOAD--
DATA : MATCHK LIKE ITABX-XMATL VALUE 0.
LOOP AT ITABX.
DELETE ITAB2.
LOOP AT ITABMASTER WHERE MMATL = ITABX-XMATL.
IF ITABX-XMATL NE MATCHK .
IF ITABMASTER-MMATL = ITABX-XMATL.
MOVE:
ITABX-XMATL TO ITAB-FMATL,
ITABMASTER-MMATL TO ITAB-FKEY,
ITABX-XMATDESC TO ITAB-FMATDESC,
ITABX-XQUANT TO ITAB-FQUANT,
ITABX-XUOM TO ITAB-FUOM ,
ITABX-XBALQ TO ITAB-F_BALQUANT.
MATCHK = ITABX-XMATL.
ELSE .
MOVE ITABMASTER-MMATL TO ITAB-FKEY.
ITAB-FMATL = SPACE .
ITAB-FMATDESC = SPACE.
ITAB-FQUANT = SPACE .
ITAB-FUOM = SPACE .
ITAB-F_BALQUANT = SPACE.
ENDIF.
MOVE:
ITABMASTER-MKUNR TO ITAB-FKUNR,
ITABMASTER-M_KQUANT TO ITAB-F_KQUANT,
ITABMASTER-M_KUOM TO ITAB-F_KUOM,
ITABMASTER-MBINLOC TO ITAB-FBINLOC,
ITABMASTER-MBATCH TO ITAB-FBATCH,
ITABMASTER-MWATSTK TO ITAB-FWATSTK,
ITABMASTER-M_IUOM TO ITAB-F_IUOM.
ITAB-FINDEX = SY-TABIX.
ITAB-SEL_QUANT = 0.
APPEND ITAB.
DELETE INVTAB.
CLEAR INVTAB.
CLEAR ITABX.
*EXIT.
ENDLOOP.
ENDLOOP.
*----- END ITAB UPLOAD--
*TEST----
*LOOP AT ITABMASTER.
DELETE ITAB2.
LOOP AT ITABX WHERE XMATL = ITABMASTER-MMATL.
**IF ITABX-XMATL NE MATCHK .
*MOVE:
ITABX-XMATL TO ITAB-FMATL,
ITABX-XMATDESC TO ITAB-FMATDESC,
ITABX-XQUANT TO ITAB-FQUANT,
ITABX-XUOM TO ITAB-FUOM ,
ITABX-XBALQ TO ITAB-F_BALQUANT,
ITABMASTER-MKUNR TO ITAB-FKUNR,
ITABMASTER-M_KQUANT TO ITAB-F_KQUANT,
ITABMASTER-M_KUOM TO ITAB-F_KUOM,
ITABMASTER-MBINLOC TO ITAB-FBINLOC,
ITABMASTER-MBATCH TO ITAB-FBATCH,
ITABMASTER-MWATSTK TO ITAB-FWATSTK,
ITABMASTER-M_IUOM TO ITAB-F_IUOM.
APPEND ITAB.
DELETE INVTAB.
CLEAR INVTAB.
CLEAR ITABX.
**EXIT.
ENDLOOP.
*ENDLOOP.
*SORT ITAB BY FMATL.
*END TEST----
ENDFORM.
FORM load_data_into_grid *
FORM load_data_into_grid.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
IS_LAYOUT = t_layout
i_structure_name = 'ITABT'
IT_TOOLBAR_EXCLUDING = t_toolbar[]
CHANGING
it_outtab = ITAB[]
IT_FIELDCATALOG = fcat[]
*call method go_grid->refresh_table_display
*EXPORTING
*i_event_id = cl_gui_alv_grid=>mc_evt_modified.
i_structure_name = 'ITABT'
CHANGING
IT_OUTTAB = ITAB[]
ENDFORM.
form create_fieldcat.
CLEAR wa_fieldcat.
WA_FIELDCAT-REPTEXT = 'MATERIAL'.
WA_FIELDCAT-COLTEXT = 'MATERIAL'.
wa_fieldcat-fieldname = 'FMATL'.
wa_fieldcat-col_pos = 1.
wa_FIELDCAT-ref_table = 'ITAB'.
wa_fieldcat-outputlen = 8.
APPEND wa_fieldcat to fcat .
CLEAR wa_fieldcat.
WA_FIELDCAT-REPTEXT = 'MATERIAL'.
WA_FIELDCAT-COLTEXT = 'MATERIAL DESCRIPTION'.
wa_fieldcat-fieldname = 'FMATDESC'.
wa_fieldcat-col_pos = 2.
wa_FIELDCAT-ref_table = 'ITAB'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat to fcat .
CLEAR wa_fieldcat.
WA_FIELDCAT-COLTEXT = 'QUANTITY'.
wa_fieldcat-fieldname = 'FQUANT'.
wa_fieldcat-col_pos = 8.
wa_FIELDCAT-ref_table = 'ITAB'.
wa_fieldcat-outputlen = 8.
WA_FIELDCAT-QUANTITY = 'VRKME'.
WA_FIELDCAT-QFIELDNAME = 'VRKME'.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FUOM'.
wa_fieldcat-col_pos = 4.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'UOM'.
wa_fieldcat-outputlen = 4.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FKUNR'.
wa_fieldcat-col_pos = 5.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'CUSTOMER'.
wa_fieldcat-outputlen = 8.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'F_KQUANT'.
wa_fieldcat-col_pos = 6.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'QUANTITY'.
wa_fieldcat-outputlen = 8.
WA_FIELDCAT-QUANTITY = 'VRKME'.
WA_FIELDCAT-QFIELDNAME = 'VRKME'.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'F_KUOM'.
wa_fieldcat-col_pos = 7.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'UOM'.
wa_fieldcat-outputlen = 4.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
WA_FIELDCAT-COLTEXT = 'BALANCE QTY TO PICK'.
wa_fieldcat-fieldname = 'F_BALQUANT'.
wa_fieldcat-col_pos = 8.
wa_FIELDCAT-ref_table = 'ITAB'.
wa_fieldcat-outputlen = 8.
WA_FIELDCAT-QUANTITY = 'VRKME'.
WA_FIELDCAT-QFIELDNAME = 'VRKME'.
APPEND wa_fieldcat to fcat .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FBINLOC'.
wa_fieldcat-col_pos = 9.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'BIN LOCATION'.
wa_fieldcat-outputlen = 8.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FBATCH'.
wa_fieldcat-col_pos = 10.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'BATCH'.
wa_fieldcat-outputlen = 8.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FWATSTK'.
wa_fieldcat-col_pos = 11.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'WAREHOUSE STK'.
wa_fieldcat-outputlen = 8.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'F_IUOM'.
wa_fieldcat-col_pos = 12.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'UOM'.
wa_fieldcat-outputlen = 4.
APPEND wa_fieldcat to fcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'SEL_QUANT'.
wa_fieldcat-col_pos = 13.
wa_FIELDCAT-ref_table = 'ITAB'.
WA_FIELDCAT-COLTEXT = 'SELECTED QTY'.
wa_fieldcat-edit = 'X'.
wa_fieldcat-outputlen = 8.
WA_FIELDCAT-QUANTITY = 'VRKME'.
WA_FIELDCAT-QFIELDNAME = 'VRKME'.
APPEND wa_fieldcat to fcat.
*LOOP AT FCAT ASSIGNING <FS_FIELDCAT>.
*CASE <FS_FIELDCAT>-FIELDNAME.
*WHEN 'SEL_QUANT'.
*<FS_FIELDCAT>-EDIT = 'X'.
*ENDCASE.
*ENDLOOP.
*CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
*EXPORTING
*I_STRUCTURE_NAME = 'ITABT'
*CHANGING
*CT_FIELDCATALOG = FCAT.
*LOOP AT FCAT ASSIGNING <FS_FIELDCAT>.
*CASE <FS_FIELDCAT>-FIELDNAME.
*WHEN 'SEL_QUANT'.
*<FS_FIELDCAT>-EDIT = 'X'.
*ENDCASE.
*ENDLOOP.
endform.
form xclude_toolbar .
t_toolbar = '&DETAIL'.
append t_toolbar.
t_toolbar = '&&SEP00'.
append t_toolbar.
t_toolbar = '&&SEP01'.
append t_toolbar.
t_toolbar = '&&SEP02'.
append t_toolbar.
t_toolbar = '&SORT_ASC'.
append t_toolbar.
t_toolbar = '&SORT_DSC'.
append t_toolbar.
t_toolbar = '&FIND'.
append t_toolbar.
t_toolbar = '&MB_FILTER'.
append t_toolbar.
t_toolbar = '&&SEP04'.
append t_toolbar.
t_toolbar = '&MB_SUM'.
append t_toolbar.
t_toolbar = '&MB_SUB_TOTAL'.
append t_toolbar.
t_toolbar = '&PRINT_BACK'.
append t_toolbar.
t_toolbar = '&MB_VIEW'.
append t_toolbar.
t_toolbar = '&MB_EXPORT'.
append t_toolbar.
t_toolbar = '&GRAPH'.
append t_toolbar.
t_toolbar = '&COLO'.
append t_toolbar.
t_toolbar = '&&SEP06'.
append t_toolbar.
t_toolbar = '&&SEP07'.
append t_toolbar.
t_toolbar = '&INFO'.
append t_toolbar.
t_toolbar = '&&SEP03'.
append t_toolbar.
endform.
FORM SAVE_ITAB.
*CALL METHOD GO_GRID->GET_SELECTED_ROWS
*IMPORTING
*ET_INDEX_ROWS = I_SELECTED_ROWS.
*LOOP AT I_SELECTED_ROWS INTO W_SELECTED_ROWS.
*READ TABLE ITAB INTO WA INDEX W_SELECTED_ROWS-INDEX.
*IF SY-SUBRC EQ 0.
*MOVE-CORRESPONDING WA TO W_MODIFIED.
*APPEND W_MODIFIED TO I_MODIFIED.
*ENDIF.
*ENDLOOP.
*MODIFY ITAB FROM TABLE I_MODIFIED.
*ENDFORM.
ENDFORM. -
After migration EP 5.0 to EP 6.0 SR1 Run Time Error Occured
Hi,
After all migration processes (except the post-migration steps ) we bounced the portal and got a run time error. We checked the error log and it was : cannot get user management factory class. We already reviewed two oss notes which were 728075, 713210 and couldn't fix our problem. Here is the error message and the information about our system.
From EP 5.0 SP6 P1 HF8 to EP 6.0 SP9 Patch 8
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
Exception id: 04:10_08/09/05_0002_9436550
See the details for the exception ID in the log file
Does anyone have any idea? please let me know.
Thanks
Serkan
Message was edited by: Serkan TumerHi Serkan
Please Check the log file for the exact nature of the error. You can find the log file in this location on your server.
<Directory>:\usr\sap\CP1\JC00\j2ee\cluster\server0\log\DefaultTrace
Do let us know what error you are facing.
Warm Regards
Priya -
Portal run time error while accessing R/3 transaction code
Hi all,
We have configured R/3 system and BW system to the Portal.
In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
Can any body have some ideas about this , pts will be assigned,
Thanks ..Have you collected the error log details which looks similar to the below one??
"The initial exception that caused the request to fail was:
User has no RFC authorization for function group SDIFRUNTIME.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)" -
[ADI]Budget upload fails with "A run-time error has occured:...
제품 : FIN_GL
작성날짜 : 2003-11-20
[ADI]Budget upload fails with "A run-time error has occured:...
===========================
PURPOSE
아래의 오류사항에 대한 해결
Budget upload fails with "A run-time error has occured:current task will terminate".
Problem Description
ADI를 이용하여 GL의 Budget자료를 upload시 오류
Workaround
Solution Description
Client PC에서 regedit를 이용하여 NLS_LANG값들을 applications의 NLS_LANG과 같은 값으로 바꿔주세요
Reference Documents
-------------------Hi Krishna
Thanks for your reply, it was while trying to "edit" the page containing the shockwave file however it’s a bit of a strange one, as When I reposted this post , I had been experiencing the problem for about a week. I then went on leave for a week and when I returned it started working again???. I queried with my IT department if anything had changed or been updated but they could not think of anything.
So for now it's working, but if you have any thoughts on what may of happened I would appreciate any suggestions?
Thanks again
Luke
Maybe you are looking for
-
So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?
-
Complaints, leads and contacts are not shown in the account overview
CRM 5.0, ICWebClient Hi, in ICWebClient (SAP Standard) there are two account overviews available. The second one provides an overview of complaints, campaigns, orders, leads and contacts related to a specific customer. Although there are several lead
-
Adobe 9 Std from Dell invalid key
Install goes through fine with the provided key on the CD pack. Then we get an invalid serial key when opening the application. Adobe has given me 2 different serial numbers and both do the same thing. We've uninstall/reinstalled multiple times. del
-
How to set repeating event in calendar
I'm using maverick that doesn't exist in the choices. macbook pro retina. Calendar has not setting for repeating appointments. The instructions in help are completely wrong.
-
Sorry... Newbie need help... Win XP Javac not working
Hello....I am pretty new at Java programming, and from wut I have heard...I can run Java applications out of Dos... I learn the codes are Javac and appletviewer. but it doesnt seem to work with win XP professional.... it said that the codes are not i