Run time error shows time _out error
hi experts ,
could you please solve this my present issue
run time erro shows time_out error
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
how can i solve this with out restarting my server
please
Hi,
>
> The maximum runtime of a program is limited by the system profile
> parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
> time limit is
> exceeded, the system attempts to cancel any running SQL statement or
> signals the ABAP processor to stop the running program. Then the system
> waits another 60 seconds maximum. If the program is then still active,
> the work process is restarted.
Since parameter (rdisp/max_wprun_time) has value of 600 seconds, so if any user will execute any transaction/report in dialog work process and it is taking time more then 600 seconds then it will cancel that transaction and give time_out error. So, either you can increase this parameter or run long running reports in background.
Thanks
Sunny
Similar Messages
-
Run Time Errors (Don't show this dialog again...)
We often create some long TestStand (TS 4.0) sequences and run them overnight or weekend. Occasionally, for one reason or another, we may see the "Run Time Error" messagebox pop up, stopping the test sequence.
If you then select the checkbox in the Run Time Error window "Don't show this dialog again for this execution", the sequence will continue.
Is there a way to set up TestStand to ALWAYS ignore the Run Time Errors and just generate a failure error instead?
Setup for TestStand as a confuguration?
or
Setup as a command in our Custom Steps?
MikefHi Mikef,
One solution would be to use the SequenceFilePostStepRuntimeError callback sequence. Have a look at the example ErrorHandlerExample.seq in the TestStand\Examples\Callbacks\PostStepRuntimeErrorCallback folder.
Obviously you wont what a dialog to appear, but using the callback, you can reset the Step.Result.Error, maybe set the status and record that an error did occur in the Steps ReportText.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer -
DTW 2007B PL:7 - DTW always showing run time error on record key no. 1377
Hi,
I've encountered a strange problem while transferring Customer Master.
Firstly, the DTW throws error randomly asking for 'Ship To' Address along with given 'Bill To' Address.
Also, at Record Key No. 1377, DTW shows run time error & asks for debugging.
Once the debugging is started, it goes on & on with any probable end of debugging.
And if the debugging option is not chosen DTW crashes & the corresponding error file is blank.
If anyone had encountered similar problem, pls respond ASAP.
Thanks,
PrashantHi Kapil,
did you use a template for importing the BPMaster and BPAddress data ? Such error normally causes by wrong LineNum and wrong signs for type of addresses.
Please reffer to SAP note 899093 and 979116. This would be helpful.
Regards Steffen
PS. templates are located in <program folder>\SAP\Data Transfer...\Template\Template\oBusinessPartners -
Hi,
Pls help me to solve my problem. My coding is comple well while run time it showing me the error,
Fatal Error: The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.
The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.pls help me as soon as possibleIt's not your coding. The XML document which contains that attribute is not well-formed.
-
Xml Publisher run time error '5148'
Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go. -
Run time error after starting eclipse
Hello,
after installation of the SAP Eclipse Theme Editor the following run time error is reported after each restart of eclipse:
java.lang.ClassCastException: com.sap.ur.plugins.ThemeEditor32Input cannot be cast to com.sap.ur.plugins.ThemeEditorInput
at com.sap.ur.plugins.ThemeEditor.init(ThemeEditor.java:188)
at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:798)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:647)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1429)
at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
at org.eclipse.ui.internal.Workbench$31.runWithException(Workbench.java:1567)
at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:620)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:575)
at org.eclipse.equinox.launcher.Main.run(Main.java:1408)
I can work with this editor anyway after choosing the project. But I still have a problem because the preview will not change when I choose a different UI element. The preview alway shows the text "welcome to the SAP ThemeEditor!". When I modify style parameters for the UI element Text the preview is modified in the right way. I already set the Internet Options for the Internet Explorer as suggested. Is it possible that the reported run time error is the reason for the preview problems? The external preview works fine.Hi,
I would suggest you to remove NWDS, then ensure that nothing left on the disk related to NWDS, and then try a fresh install.
Best Regards,
Ervin -
Run time error while creating sales order
hi all,
im working on ECC 4.7. normally when i create a sales order (VA01) and use incompletion log, it shows no errors. but when i start to save the same order . it shows a RUN TIME ERROR of ABAP . so plz help me to solve out this error
thanks\Hi Tarun,
When you get a run time error, you can see the error analysis on the left hand side. Check what the analysis is saying and you may need an ABAPer to find out the exact reason for the dump. I am just guessing it could be due to number range.. just a guess.
Regards,
Raghav -
Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred
When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
RogérioHi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj -
Portal Run time error after deploying custom logon page par file in portal
Hi Experts,
We have customized the standard portal logon par file for client XYZ and imported it with the same name (com.sap.portal.runtime.logon.par) in portal.
It is working fine for XYZ . And another client ABC wants the same customization for them also. So we took the par file from XYZ and imported it in ABC system. But in ABC system, we are getting Portal Run time Error. When we checked the logs, it is showing error in LogonBean class.Wwe have included the necesary jar files. Could anyone help us in identifying what is missing?
Thanks
VJHello Vijay,
Please paste or attach the error log.
Regards,
Haseena -
Run time error while logging from a client
hi all,
My server is connected to 10 clients. out of that 2 clients are suddenly showing error while logging.
Microsoft visual studio C++(error window)
run tme error
debug
error c:/program files/sap/sap business one/sapbusiness one.exe
This is the error window showing. I have uninstalled the client and again installed it but with no results. I found in the path mentioned above there should be the client run file "sap business one.exe", which is not present. I mean the .exe is missing. the file shows "sap business one" only.
whenever we install the client then i the folder
c:/program files/sap/sap business one
there is a .exe file. which is not being installed in this client machine. what is being installed is a
sap business one (not a .exe)
when the client icon in the desktop is made to run, the log in screen appears, the list of company and db appears. I have recently upgraded the server to PL 42. so when a company is selected for log in then the client upgrade message also appears. when "ok" is clickd the run time error appears.
where as all other clients are running well after the upgrade.
please help with a solution.
regards,
Raj
Edited by: debraj bhattacharyya on Dec 5, 2008 5:37 PMI have explored all the areas and I hope the problem is with the exe file only. Because I have tried an option. I copied the entire file SAP Business One (in the C:
Program Files\sap) from one client which is working to the client where the error was showing. Then the it started working properly.
But I donot think this will be a permanent solution. Because on reinstaling the client the SAPBusiness One.exe does not appear and to the best of my research i am quite sure that may be the problem.
Any idea from any one for a perfect reason.
Regards,
Raj -
Run Time Error in Account Determination
Dear Friends
In my system using std one for account det then it posting to FI.
Now I created my own Table, Access Seq, Condition Type and Procedures after all assignment when I assign my procedures to F2 .
Then I done sales cycle upto billing, but when I am trying to save it it shows Run time Error. if assigning the Std Procedure KOFI00 to F2 then it is ok.
give me solution
Thanking You
ArunDear Arun,
Can you provide in detail !!
What is the error you are getting when you save the invoice
Check the settings at all these steps with compare to the standard setings.
SPRO>IMG>Sales and Distribution>Basic Functions>Account Assignment/Costing-->Revenue Account Determination.
-->Check Master Data Relevant For Account Assignment
-->Define Dependencies Of Revenue Account Determination
-->Define Access Sequences And Account Determination Types
-->Define And Assign Account Determination Procedures
-->Define And Assign Account Keys
-->Assign G/L Accounts.
I hope this will help you,
Regards,
Murali. -
Run Time Error while Transferring data to Application server
Hello Abaper's,
I have generated a XML data using the FM : " SAP_CONVERT_TO_XML_FORMAT ".
While transferring the data to a File on Application Server using the statement
DATA : wa_xmltab TYPE truxs_xml_line,
it_xmltab TYPE truxs_xml_table.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
TRANSFER wa_xmltab TO FNAME. <<<<<<<<<<<<<< Getting Error here
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
The Run Time Error i am Facing is
Short text
The current statement is only defined for character-type data objects.
Error analysis
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Regards
jvHello Volker Binder ,
Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
Actual No. of Records in Internal table :
matnr matkl meins
0-BUY1 012 PC
0-BUY2 012 PC
1 EA
2 012 L
3 01 EA
12 EA
23 001 ST
24 015` EA
28 010 EA
29 015` AU
XML Format for the above 10 fields is :
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
This 4th record data in XML is also incomplete..
The above XML format is generated only for 4 records out of 10 Records.
Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
Regards
Jv -
Run time error while installing Labview 8.6.1 in Vista x64
hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem... -
RUN Time error while use filter table in query generator
Hai..
I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error messageThis is my function
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date, ,>
-- Description: <Description, ,>
-- =============================================
ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
returns varchar(500) as
BEGIN
DECLARE @Obj_type_Name varchar(100)
select @Obj_type_Name =
case @Obj_type
when -2 then 'Opening Balance'
when -3 then 'Closing Balance'
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'A/R Invoices'
when 14 then 'A/R Credit Memo'
when 15 then 'A/R DeliveryNotes'
when 16 then 'A/R Returns'
when 17 then 'oOrders'
when 18 then 'A/P Invoice'
when 19 then 'A/P Credit Memo'
when 20 then 'Goods Receipt PO'
when 21 then 'Goods Returns'
when 22 then 'PurchaseOrders'
when 23 then 'Quotations'
when 24 then 'IncomingPayments'
when 25 then 'Deposit'
when 28 then 'oJournalVouchers'
when 30 then 'JournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'VendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'ChecksforPayment'
when 58 then 'Stock List'
when 59 then 'Goods Receipt'
when 60 then 'Goods Issue'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'Inventory Transfers'
when 68 then 'oWorkOrders'
when 69 then 'Landed Costs'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 76 then 'Postdated Deposit'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'Inventory Valuation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 203 then 'A/R Down Payment'
when 204 then 'A/P Down Payment'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else cast(@Obj_type as char(20)) end
return @Obj_type_Name
END -
Run time error message when I try to open itunes?
I cannot open itunes afte using it for 3 years. I receive a run time error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2
Maybe you are looking for
-
Current Status report not updating
Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong. Usually I can get the "Current Status" back to being accure by going to File/Refresh. In the past when something changed the status,
-
When I attempt to convert a pdf file to a word file it does not let me and I am re-directed to the purchase page. I already paid for this service and It will not let me convert. What is going on here ?
-
Downloading maps from media card onto blackberry
Could I install maps from a media card onto my Blackberry if I download these from my computer?
-
Unplanned changes to post to GL account
Hi Expert Is there user exit in tcode ME21N for transaction 'Subsequent Debit'? Currently, unplan changes posted to vendor account via this path.The unplan charges created accounting entries to DR Stock account and CR Vendor account. We have a requ
-
Upload Document while result recording
Hi Experts, I need your help on the below scenario to check the feasibility and possible solution. Scenario : We have a MIC result recording screen where user needs to attach document(mostly captured image) for each or some MIC and record the Inspect