Run time RFC communication error ERP ECO 7.0

Hi guys
We are using ECO 7.0 for ERP 6.0 and I can acess B2b site and take products into the basket without issues. But as soon as I click go to quotation, I get run time errors. Looking at the trace i found that issue is with jco exception at RFC_Error_CommunicationCPIC Call CRMRCV.
I then looked into ECC ST22 dump log and found that lots of dumps under user id sapsys for get crm release information. I am not sure why ECO is looking for CRM release when we dont have CRM in picture.
If you have encountered this issue, please let me know.
Regards
Jai

Following is the dump that I see in our ECC system
Function module "CRM_GET_TRANSFER_STRUCT" not found.
What happened?
The function module "CRM_GET_TRANSFER_STRUCT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
ror analysis
The program "SAPMSSY1" contains the CALL FUNCTION statement.
The name of the function module to be called is "CRM_GET_TRANSFER_STRUCT".
No function module exists with the name "CRM_GET_TRANSFER_STRUCT".
All function modules are listed in the Function Library (SE37).

Similar Messages

RFC communication error

hi guys,
our company has SAP servers in location A which often communicates with servers in location B. recently we moved both DEV and PRD servers to location C from A. the servers from B and C communicates via a VPN link.sequel to this movement we changed the IP configuration of all the systems. presently users in location B can access the PRD server in C but are not able to access the DEV server.
the following error messages appears:
ON PRD
TMS Alert viewer
transport control program tp ended with error code 0212
error:could not access file as supposed
command:SHOWBUFFER PRD PF=
SAPDEV\sapmnt\trans\bin\TP_DOM
while on DEV
message:RFC-communication failure
RFC communication error with system/destination
partner not reached
would appreciate if u culd profer a solution as soon as possible
Regards walata

Hi Walat,
User access problem :-
You located at location B are not able to access server DEV which is located C
Pls take help from your system administrator for doing below task if you are not aware about output
From location B try to telnet server DEV on port 32<NN> or 36<NN> ( <NN> is your instance no of DEV )
for e.g
from command prompt run the following command
telnet < dev server ip > 32<NN>
check the ouput
How to check the ouput
1 after giving the above command, if you get blank screen it mean ports are open
2 after giving the above command, if you get ouput on screen like " conneting to server < dev server ip > it mean ports are not open
If the ports are not open then inform you network team that port mention aboev should be open for users.
once the ports get open check above step again , if you get the blank screen , then you wil be able to login to SAP
Server to Server Access problem :-
From server DEV to PRD and vice versa check whether you can share the drives .
if yous system team that yor PRD system should be able to to access the share folder sapmnt of server DEV ( SAPDEV )
As well as check server to server port 33<NN> is open or not
Any query pls reply.
Thanks
Anil

RFC Communication error when doing initial indexing

Hello Everyone,
I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
We currently are on Revision 49.
I also have referred to OSS Note 1138603.
The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
The Global parameters within BIA are:
BATCHPARA - 2
NUMPROC - 5
PKGSIZE - 10000000
SUBPKGSIZE - 20000
We have two app servers with 52 Dialog processes and 25 Background processes.
Any help would be really appreciated.
Thanks
Dharma.

Removing references to systems and ports
Issue:
When the initial indexing is being carried out for an InfoCube to
create the BIA Index and there is more than one application server in
the system the job is failing with the http error.
Hello Everyone,
Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
The error message is,
"Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
Overview/Background:
When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
We also confirmed if the local gateway was used for connectivity.
The above issue was not in other systems where we only had one server.
We currently are at Revision 49 and SP 13 in BI.
We have E5345 Clowertown blades (2 x 4) 16GB blades.
Please let us know if you need additional information.
Thanks in advance for the input.
Dharma.
Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
Run TimeError Message Presented when InDesign CC 2014 runs:
Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
Show this alert again?

As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
Thanks,
Manan

RFC Communication - error CPIC return code 020, SAP return code 665

Hello,
I have created RFC destination for connecting SCM system from Solution Manager. Both the systems are Unicode.
I am getting the following error --
ERROR                service '?' unknown
LOCATION             SAP-Gateway on host gva4103 / sapgw00
COMPONENT            NI (network interface)
COUNTER              4028
MODULE
LINE
RETURN CODE          -3
SUBRC                    0
RELEASE              640
TIME                 Mon Apr 24 11:28:21 2006
VERSION              37
And in SM21, I am getting following description
Communication error, CPIC return code 020, SAP return code 665
Following are the things I have checked..
1. RFC destination user checked, password reset in SM59 and in the target system
2. checked entries in /etc/services - Entry sapgw03 is present.
Please let me know what all things I need to check.
Thanks and Regards,
Vaibhav

I solved the problem by myself.
The problem was with the entry in services file only.
I was checking the file on Target system, which had the entry. There was no entry in Host system services file. After modifying the file, the connection now works fine.
Thus for RFC connection, entry of the target system gateway MUST be there in /etc/service of Host system.
Regards,
Vaibhav

Printer communication error, canon mx870 prints one time then communication error on next print job

I have a canon mx870. It keeps sending a message that there is a communication error. I then re enter my network key and restart the printer and my macbook pro. It will print a few times then the message returns. My PC is also connected to the network and does not get this message. Any suggestions?

Hi c,
There were some updates addressing printing issues. Run Software Update, update whatever's there, and see if that helps.

Run-time 2009 executable error

Hello,
I've have loaded the 2009 run-time environment onto my computer and this has installed ok; however when I try and run an executable file, built successfully in the 2009 version, the error message that the 2009 runtime engine can't be located comes up.
Can anybody help?
Batis
Solved!
Go to Solution.

Hello,
Did you install this:
http://joule.ni.com/nidu/cds/view/p/id/1383/lang/en
Could you install/reinstall the runtime engine in the link. Are you using NI-VISA or NI-DAQmx in your program? These have their own runtimes:
http://joule.ni.com/nidu/cds/view/p/id/1408/lang/en
http://joule.ni.com/nidu/cds/view/p/id/1449/lang/en
Regards,
Mark B
===If this fixes your problem, mark as solution!===

Run Time Message Mapping error

Hello Experts,
I am working on JDBC to IDOC scenario. I am getting mapping error at SXMB_MONI and the error message is as below:
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZABCD01. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at and so on.....
I tested in Message Mapping by entering the values and I am able to see the target structure with out any Mapping errors..
But when JDBC real time it got Runtime mapping error as above:
Source
tablename.Set -
1.1
row--
0.Unbound
a----
0.1
b----
0.1
Target
ZABCD01-----1.1
IDOC--
1.1
-Begin-----Required
XYZ--
0.1
a----
0.1
b----
0.1
Dont know where is the problem is: I tried with payload its giving the same error as runtime....
Payload looks as :
<?xml version="1.0" encoding="utf-8" ?>
- <set>
- <row>
<a>value</a>
<b>value</b>
</row>
</set>
Can any one faced same issue?
Thanks
Rajeev

HI Satish,
I created a new Datatype and tested wtih payload still the same..I am unable to create target node as IDOC segment is 0..unbound and below all fields are not not creating stilll they are mapped to source fileds.. what would be the reason?
IDOC structure is:
ZIDOC........................1....1
...IDOC........................1....1
.....BEGIN.....................Requied (I disabled this filed)
.....SEGMENT1.............1....1
.....SEGMENT2..............0...1
.........SUBSEGMENT1...0...99
..............FIELD1.............0....1
..............FIELD2..............0...1
..............FIELD3..............0...1
..........SUBSEGMENT2....0...1
..............FIELD4..............0...1
..............FIELD5..............0...1
JDBC strucute is
MT_XYZ
....set.................1...1
.....row...............0...unbound
......field1............0...1
......field2............0...1
......field3............0...1
......field4............0...1
I am not mapping all fields to respective fileds of source to target ...if I dont map ZIDOC and IDOC then mapping executing successful but I am not getting SUBSEGMENT1 and SUBSEGMENT2 with there fields values..
If I do test by entering values manually it populate all fields values with subsegments but when i copy the payload from SXMB_MONI then I am getting error and If I remove target node mappings I am unable to get subsegment and fileds populated..
How can I make FIELDS of IDOC to get populated??
Thanks
Rajeev
Edited by: rajeev raj on Aug 25, 2009 9:26 PM

Run time work bench error in PI EHP1

Dear All ,
when i go to runtime workbench & clicked on SLD registration .its showing red mark . Kindly help on this
Below is the error which i got from the details .
(XIDomain.IntegrationServer.SecureMsgUrl: SecureMsgUrl of Integration Server is.00.hostname is null. )
Thanks in advance .

Hello,
double check the PI Exchange Profile parameters are maintained correclty
for example- com.sap.aii.connect.landscape.name
Have a look into this thread as well,
Re: RWB / SLD Registration / MsgUrl is null?!?
regards,
francis

ERROR in the RFC communication when parabatch is set to more 3 (default)

Hi experts,
We have a 10 blades BIA system connecting to our BW Production. When we set the parabatch to more than the default 3 (we set to 4 or 5), We keep getting 'Batchpara Error' and 'Error in the RFC Communication: Error when opening an RFC Connection' during the initial index build. Here are what we do and what we see:
1. set parabatch to 5 and build 1 initial index (cube is 46 mil rows, 22 GB in size) - Failed with the above errors
2. set parabatch back to 3 and build 1 initial index (same cube as above)- successful but slow
3. set parbatch back to 3 and build 2 initial indexes simultaneously (16 mil rows/4GB and 6 mil rows/2 GB) - Failed with the above errors.
In the BIA index log I see the following error:
Error in the RFC communication: Error when opening an RFC connection (TREX_BIP)
Message no. STREX005
In SM37 in one of the logs I see the followings:
Parabatch Error
Any light you can shed on why we are encountering this issue will be much appreciated. Also, I observed that there is a long idle time in all systems (BIA, DB2, BW) and seemed like their respective resources were not utilized at all. Once in a while I do see surge of cpu/memory usage in all systems but not too terrible. I'm puzzled by why there is such long interval of idle time in all systems while the initial index build is going on.
BTW...we did the same thing (set parabatch to 5, and run parallel initial builds) in our non-prod BIA (2 blades) and QA BW landscape and do not have any issue at all.
Thanks!
Kee

Hello
PLease check the sapnotes and check the developer trace for more information.
Note 314530 - Number of RFC/CPIC connections for external clients
Note: 1070034
It can also be because your system has reached it its max gateway connections...also check whether you are getting error message "Communication error, CPIC return code 017, SAP return code 450
" in sm21 ???
Regards
Karthikeyan.K

Relocation error at run time.

Hi All,
I am getting a weird run time symbol relocation error on Solaris 2.6 with a C++ code compile by Workshop Compiler version 5. I built a shared library that statically links libCstd.a. This is my first question. Does CC Workshop compiler by default brings in libCstd.a in its standard mode(compat=5)?? (i understand this is its standard behaviour as given by sun documentation) After building the shared library, i built an xecutable that loads this shared library but i get the following unresolved
external :
Output dump from console :
ComponentFactory's constructor
[ComponentFactory::getComponent] libName: libibmxmlutil.so compName: XMLUtil
Function found...
Component::setLibrary Library addref::Ref count Component addref::Ref count ld.so.1: testcf: fatal: relocation error: file /vobs/cmn/midware2/sapi_base/debug/libcomponentfactory.so: symbol __1cDstdNbasic_ostream4Ccn0ALchar_traits4Cc___2l6MI_r1_: referenced symbol not found
Killed
Now this symbol which is *****21MI_r1*** belongs to libCstd.a and i have statically linked this libCstd.a when i built libcomponentfactory.so. Still i am wondering why this symbol is never a part of libcomponentfactory.so. I did an nm -A libcomponentfactory.so and tried to grep on the particular symbol. This symbol is UNDEF in symbol table. ANY HELP WILL BE GREATLY APPRECIATED.
thanks--
mail me at [email protected] if you have any suggestions.

Oops ! That was for Workshop 6 (CC 5.1). For Workshop 5.0, you
can try installing the corresponding latest C++ patch:
Patch-ID# 107311-12
Synopsis: C++ 5.0: Patch for C++ 5.0 compiler
(Bug id # 4347423 - Build 5.0 libCstd.a with -KPIC)
One workaround is to build a shared version of libCstd from libCstd.a
and use the shared library instead of the archive:
CC -G -z allextract libCstd.a -h libCstd.so.1 -o libCstd.so.1 -lCrun
ln -s libCstd.so.1 libCstd.so
Hope this helps.
Thanks,
Gopinath.

Run-time vs. System errors

Whats the a good way to tell the difference between run-time and system errors.

Inkisar.a wrote:
Whats the a good way to tell the difference between run-time and system errors.
Exceptions

Hyperion Financial Report 11.1.1.3 - Run-time error '429':

Hi All,
Is Hyperion Financial Report 11.1.1.3 compatible on Windows 7 x64 VM?
If so, can someone help me with the Run-time error '429' "ActiveX component can't create object", which I am getting when I click the Financial Reporting Studio link after install.
Thanks

Yes, it is supported. You can see it in the EPM System Basic Platform tab here: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-2-128342.xls
There is an entry for the same error message on My Oracle Support:
Cannot Launch Financial Reporting Studio [ID 1115073.1]
Modified 19-APR-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Fix
Applies to:
Hyperion BI+ - Version 11.1.2.0.00 and later
Information in this document applies to any platform.
***Checked for relevance on 20-Apr-2012***
Goal
When you try to launch the Financial Reporting Studio on a Vista 32bit desktop workstation, you receive the following error:
"Run-Time Error '429': ActiveX Component can't create object".
You have installed Studio as an administrator on the desktop
Fix
When you install Financial Reporting Studio using the Administrator account, right-click "Run as Administrator".
Related
Products
•Enterprise Performance Management and Business Intelligence > Business Intelligence > Hyperion Query & Reporting > Hyperion BI+
Keywords
ACTIVEX; ADMINISTRATOR; DESKTOP; FINANCIAL REPORTING; FINANCIAL REPORTING STUDIO; INSTALL; RUN-TIME; STUDIO; WORKSTATION
Errors
ERROR 429
Although it says Version 11.1.2.0.00 and later, I'd give it a shot.
Cheers,
Mehmet

Screen Sharing suddenly fails with "Communication Error" in console log. File sharing works fine. Thoughts?

I have been using Lion provided Screen Sharing for months without incident. Suddenly (I do not believe there was an intervening o/s update), it will not connect. I get a "Connection Error" dialog after a minute or two. The console log shows the same thing w/o any useful info. I can share files with the target mac fine and run time machine without error. Any ideas on what's up?
Thanks

Check the host property configured in KM URL generator service.
Navigate to
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Global Services -> (switch to advanced mode) ->URL generator Service -> Host
You should use the fully qualified host name and port.
Regards,
Prasanna Krishnamurthy

How can attach movieclip in run time

Hi,
Getting some problem to attach movieclip at run time...............
I have a shell.swf and at run time i am attaching a template.swf. In template.swf file have mcMenu Movieclip.
I am unable to access the or attach the movieclip at run time getting this error (1180: Call to a possibly undefined method mcMenu.)
that movieclip is not available on the stage.... it is in the library of template.swf file. Need help
thanks in advance
flash@dicts

use the applicationdomain class:
load(yourswfURL,yourclassString);
// you don't need to change anything below:
function load(urlS:String, classS:String) {
    var ldr:Loader = new Loader();
    ldr.contentLoaderInfo.addEventListener(Event.COMPLETE, function(e:Event){loadCompleteF(e,classS);});
    ldr.load(new URLRequest(urlS));
function loadCompleteF(e:Event,classS:String):void {
    var loadedAppDomain:ApplicationDomain = e.target.content.loaderInfo.applicationDomain;
    var C:Class = loadedAppDomain.getDefinition(classS) as Class;
    var instance:* = new C();

Run time RFC communication error ERP ECO 7.0

Similar Messages

Maybe you are looking for