Run Transaction from wda and display results

Hello,
If it is possible to run SAP transaction(f.e.ME2L) and the result (ALVreport) display in wda window?
Regards,
Natalia.

Hi,
Check this forum thread regarding calling transaction from WD4A.
Re: Calling a transaction code
Thanks
Suman

Similar Messages

How to Get Input From User and Display Result

Hi ,
I need to get 2 inputs from user and to display it's Mutilple Value.
The Below Code is working fine to get 2 Input's from user,but it display a Junk value as a Result .How to
overcome this Problem. I need to display it's Mutilple(a*b) value of "a " and " b".
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws IOException{
BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
do{
a=(char)br.read();
Count++;
b=(char)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);
}

Hi ,
I need to get 2 inputs from user and to display it's
Mutilple Value.
The Below Code is working fine to get 2 Input's from
user,but it display a Junk value as a Result .How
to
overcome this Problem. I need to display it's
Mutilple(a*b) value of "a " and " b".
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws
IOException{
BufferedReader br =new BufferedReader(new
InputStreamReader(System.in));
do{
a=(char)br.read();This line will get you the ascii-value of the typed character.
This line will not get you the value typed in.
Try looking for Integer.parseInt()...
Count++;
b=(char)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);

How to trigger workflow from WDA and read workflow container into WDAscreen

Dear Expert,
Please suggest the solution for the following requirement:
   1. Create 1 leave request from WDA and submit for approval
   2. When User press "submit" button in WDA screen, workflow will be triggered for processing approval .
   3. When 1 request is sent to approver, he logon into portal and access to UWL to process task himself.
   4. After he press approval link, the system will call WDA screen to process approval ( this screen will contain full information of requester.)
   5. After finishing process, the result will return workflow and end of process.
Please send simple example for step 1 and one for get data from workflow into WDA screen at step4
Any help would be appreciated
Thanks and best regards,
DucTV.

Hi,
I am not sure for what reasons you are developing a application but SAP has its own standard workflow process for applying leave from ESS portal..
1. AS soon as you click on the submit button of the applicaiton then you need to trigger a workflow right in that case you make sure that you need to pass some data to the workflow container I hope you might be using either SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW to start the workflow in both the function module you have to fill this table in Order to pass the values from ABAP    program to workflow container.
The answer to your question is it depends on the type of the work item ID you are passing to the SAP_WAPI_READ_CONTAINER if you are passing a top work item ID then you will have workflow container in LT_CONTAINER if you are passing any of the child or dependent work item ids of the top work item id then you have that respective task container value.
2. You can make use of the any foreground activity or a decision step, it depends on how you want to get back the result, if you use a foreground activity step then in that case you have to populate the result back to the task container and if let say you are using a decision step then in that case you do not have to populate the result there will be standard container element _RESULT in the decision step it will be filled.
Make sure if you are expecting some work item in UWL and as soon as you click on the work item your application should open then configure in SWFVISU transaction and maintain DTD in UWL any portal consultant can perform this steps in few seconds.
3. When the workflow is started then the work item which you are able to get back is the one which helps to identify dependent work item ids it is the TOP or PARENT work item ID.
Regards
Pavan

Problem in Retrieve Image from DB and display in the JSP page

Hi All,
I did one JSP Program for retriveing image from DB and display in the JSP Page. But when i run this i m getting "String Value" output. Here i have given my Program and the output. Please any one help to this issue.
Database Used : MS Access
DSN Name : image
Table Name: image
Image Format: bmp
Output : 1973956
Sample Program:_
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ page import="java.io.*" %>
<%
     try{
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          Connection conn = DriverManager.getConnection("jdbc:odbc:image");
          Statement st = conn.createStatement();
          ResultSet rs = st.executeQuery("SELECT images FROM image");
          String imgLen="";
          if(rs.next()){
               imgLen = rs.getString(1);
               out.println(imgLen.length());
          if(rs.next()){
               int len = imgLen.length();
               byte [] rb = new byte[len];
               InputStream readImg = rs.getBinaryStream(1);
               int index=readImg.read(rb, 0, len);
               System.out.println("index"+index);
               st.close();
               response.reset();
               response.setContentType("image/jpg");
               response.getOutputStream().write(rb,0,len);
               response.getOutputStream().flush();
     }catch(Exception ee){
          out.println(ee);
%>
Thanks,
Senthilkumar S

vishruta wrote:
<%
%>Using scriptlets is asking for trouble. Java code belongs in Java classes. Use a Servlet.
               out.println(imgLen.length());Your JSP was supposed to write an image to the output and you wrote some irrelevant strings to the output before? This will corrupt the image. It's like opening the image in a text editor and adding some characters before to it.
               byte [] rb = new byte[len];Memory hogging. Don't do that.
          out.println(ee);You should be throwing exceptions and at least printing its trace, not sending its toString() to the output.
You may find this article useful to get an idea how this kind of stuff ought to work: [http://balusc.blogspot.com/2007/04/imageservlet.html].

How to call a CRM transaction from WDA component

I have requirement where i need to open the CRM transaction CRMD_BUS2000126 from WDA with the object id selected in the context. To be more specific all i need to do is to open the activity screen of a particular give activity number from a WDA component.
I have checked out the previous threads there is a solution how to fire a transaction from WDA, but i need to send a parameter to this transaction to open that particular activity number screen.
please advice asap.
Thanks,
Shyam

Karthikeyan,
Please make sure that flag attribute is under some node, say NODEA. NOW please select the interface node property and input element of NODEA.
now NODEA will be available in interface controller. Interface controller acts like a global controller between two different components.
So from interface controller you can take that flag value.
pls reply back if you have any confusion.
Regards
Srinivas

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

How to retrieve xml file from BLOB and display on browser with css/xslt

Hi All,
I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form...
Pl. guide me.. any docs..?? Logic...??
Thanks in Advance.
Sandeep Oza

Hello Sandeep!
I'm not familiar with jsp but logic should be as follows:
-in jsp page instantiate XML parser
-load specified BLOB into parser
Now you may traverse the XML tree or you might load XSL file and use transform method to transform XML according to XSL file.
I have an example where I'm selecting XML straight from relational database and then transform it using XSL into appropriate HTML output, but it's written in PSP.
You can try http://www.w3schools.com/default.asp for basics on XML, CSS, XSL. It's easy to follow with good examples.
Regards!
miki

Can't reinstall osx lion from internet, and display a message"cannot find installation information ,please contact applecare, what should i do?

hello
I can't reinstall osx lion from internet, and display a message"cannot find installation information ,please contact applecare, what should i do?
thanks

I'm no Lion expert, but I believe you can boot from the Recovery partition by pressing the Command and R keys on startup, then reinstall.

We are running aperture from cs4 and it keeps freezing the computer we running it on snow lepard

We are running aperture from cs4 and it keeps freezing the computer . we running it on snow lepard help please!

Hello,
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

How to Get input from User and Display it's Value

Hi ,
I need to get 2 inputs from user and to display it's Mutilple Value.
The Below Code is working fine to get 2 Input's from user,but it display a Junk value as a Result .How to
overcome this Problem. I need to display it's Mutilple(a*b) value of "a " and " b".
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws IOException{
BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
do{
a=(char)br.read();
Count++;
b=(char)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);
}

Changed to Integer but still the problem persists.
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws IOException{
BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
do{
a=(int)br.read();
Count++;
b=(int)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);
}

Calling SAP Transaction from WDA

Hi,
We have a peculiar requirement of calling SAP Standard Transaction from Web Dynpro ABAP.Well, we tried achieving this using the Transactional iview. On click of appropiate link/button in my applicaiton, I can call the Transactional iview. But the problem is, I could not pass on the data from WDA Application to Transactional iview. I need some inputs in handling such cases.
The case might look something similar to PCR's final updation(like after all approvals of PCRs, the final Administrator executes the workitem which in turn calls the Notification Maintenance and this in turn calls the PA40 passing the data from Adobe form(XML data) to PA40 txn. Like this, After all my approvals, I would like to call the SAP Transaction passing the data from WDA Application. Hope I am clear.
Regards
<i><b>Raja Sekhar</b></i>

Hi,
Maybe you can use the information from this blog to pass dynamic parameters to the SAP transaction iview which you call with the created URl
How to launch SAP transaction & pass parameters via URL
Dagfinn

Execute Package and Display Results

Hi Everyone,
Just starting to use packages. I've successfully compiled the package below.
Can someone please show me how to execute it and display the results with SQL Developer?
Thank You in Advance for Your Help,
Lou
create or replace
PACKAGE pkg_Search
AS
TYPE CUSTOM_REF_CURSOR IS REF CURSOR;
PROCEDURE My_Procedure (
arg_Cursor IN OUT CUSTOM_REF_CURSOR);
END;
create or replace
PACKAGE BODY pkg_Search
AS
PROCEDURE My_Procedure (
arg_Cursor IN OUT CUSTOM_REF_CURSOR)
IS
BEGIN
OPEN arg_Cursor FOR
SELECT sysdate FROM DUAL;
END;
END;

SQL Developer can't display the result of this particular package. I assume that what you want to see is the result set from the REF CURSOR that you have as an OUT parameter. However, you can do this with SQL*Plus - here is a script:
VARIABLE my_cursor REFCURSOR;
BEGIN
pkg_search.my_procedure(:my_cursor);
END;
PRINT my_cursor;
exit

Call SAPGUI transaction from BSP and vice versa

Hi all
There was some discussion about this topics before. Maybe someone can just point me to the thread answering this issue:
1. I need to call a SAPGUI transaction from a BSP application: I want to use SAPGUI, not ITS/webgui, I need single sign on, the SAPGUI transaction could possible run in another SAP system then the BSP.
As far as I understand I need to create a *.sap file with the correct parameters for sapshortcut. But how does single sign on work? Can I create a logon ticket in my BSP and forward it to sapshortcut?
2. I need to call a BSP application from a SAPGUI transaction or report, with single sign on but in a MS IE window, not inside a SAPGUI HTML control
Can I create a logon ticket in my coding an append it to the start url for the BSP?
any hints?
thanks
Michael

hi Michael,
For your second issue,to call a BSP application from a SAP GUI in MS IE explorer,
you can use the Function Module CALL_BROWSER in your report,like
data url(200) type c.
url = 'http://<server>.<domain><port>:'.
concatenate url '/sap/bc/bsp/sap/' into url.
concatenate url 'znw_poc2_1_prtl/dts.htm' into url.
concatenate url '?sap-user=<userid>' into url.
concatenate url '&sap-password=<passowrd>' into url.
CALL FUNCTION 'CALL_BROWSER'
EXPORTING
    URL                          = url
*    WINDOW_NAME                  = ' '
*    NEW_WINDOW                   = ' '
*    BROWSER_TYPE                 =
*    CONTEXTSTRING                =
* EXCEPTIONS
*    FRONTEND_NOT_SUPPORTED       = 1
*    FRONTEND_ERROR               = 2
*    PROG_NOT_FOUND               = 3
*    NO_BATCH                     = 4
*    UNSPECIFIED_ERROR            = 5
*    OTHERS                       = 6
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For this to work you have to enable SSO on your server.
you can check if it is enabled or not by runnning the BSP application "SYSTEM" ,page "SSO2TEST.htm" .
Follow the instructions on the page for testing.
This may not be a great way as your userid password are passed via URL,still it works .
Hope this helps,
Regards,
Siddhartha

Read integer values from spreadsheet and display the values in a table

Hi all,
I have integer values to read from a spreadsheet and display them in a table. I am using 'Read from spreadsheet file' in 'integer' mode. I would like to display these values in a table. The problem is that the table takes only 2d-array of string as input but not integer.
It works fine if I change the mode of 'Read from spreadsheet file' from 'integer' to 'string' but I want to read integers and have to use the integer values for further calculations. Please give any suggestions on displaying integers to a table.
Thank you.
Solved!
Go to Solution.

No don't take element by element just convert as a whole. See the attached example
Good luck
The best solution is the one you find it by yourself

New in Oracle Web form 9i : How to run fmx from web and login

oracle form 9i from web.
I am new in oracle form 9i (web form). Before I use oracle form client 6i. Just set icon with command (D:\ora6i\BIN\ifdbg60.EXE MYFORM.FMX). The login will be prompt out and user can log in to run many oracle 6i forms from oracle menu. In Oralce form 9i designer, I can open form designer and use run form from IE.
1. How can I depoly these form with menu to other users.
2. How can I define the url link to public (Application Server)?
3. SHould there is any login prompt from web usage.
Tks.

solved.

Run Transaction from wda and display results

Similar Messages

Maybe you are looking for