Runing In debug mode problem

i m using Form9i suite , oracle 9i running under VMware machine where i installed windows XP service pack 3 with internet explorer version 8 IE8.
i have a problem when i run my Fmb form in debug mode it is not loaded, even though if i run it normally my fmb form loaded well .
any suggestion
thank you
Edited by: user12923153 on Nov 11, 2012 6:37 AM

Hi
But the program to print the advice is set in the payment?
What can you see in Print Out/Data Medium section?
You need to considere F110 runs the print program in backgroud mode, that means a job is scheduled, so try to checl the job too
Max

Similar Messages

Debug mode problem.

Hi Expert,
There is sap script form attached to the particular payment advice. When i am running trasanction F110, it contains the particular zprogram assigned to that payment method. I actually want to debug this and want to see how program accesses zprogram and zform but despite of breakpoint in the program and script it don't stop to the zprogram or from. Could you please guide me how i can reach to the zprogram and zscript in debug mode ?...Output is getting generated with the help of zprogram and zform.
Thanks.

Hi
But the program to print the advice is set in the payment?
What can you see in Print Out/Data Medium section?
You need to considere F110 runs the print program in backgroud mode, that means a job is scheduled, so try to checl the job too
Max

Problem viewing cursor value in debug mode

Hi eveybody!
I'm French and new here.
I know some topics deal with my subject but I don't really understand.
Here's my environnement :
Win2000 / ORA 9iR2 / SQL DEVELOPPER 1.0.0.15.57
As some people say when i'm in debug mode (after compiling my procedure PL/SQL for debug) I can't see any value of my cursors !
Ex :
CURSOR cur IS
SELECT COL1, COL2
FROM TABLE1;
v_cur cur%ROWTYPE;
For v_cur in cur
Loop
If v_cur.COL1 = 'toto' then
'do something' ;
End if;
End Loop;
When I run this step by step in debug mode I can't see the data of my cursor in the data or smartdata pane.
The values of my cursor is allways null !
I guess I'm not the only one to see that bug.
My question is should I wait a new release of sql developer or is there any solution for this problem?
Anyway I want to congratulate the developers team who create this tool which is fabulous! It makes me forget TOAD and it's totally free.
Thanks a lot for this job.
Greg

Here is a piece of code I use:
CREATE OR REPLACE PROCEDURE sm_list AS CURSOR emp_cursor IS
SELECT d.department_name,
e.last_name
FROM departments d,
employees e
WHERE d.department_id = e.department_id;
emp_record emp_cursor % rowtype;
BEGIN
FOR emp_record IN emp_cursor
LOOP
DBMS_OUTPUT.PUT_LINE(emp_record.last_name);
END LOOP;
END;
With this example, I agree, the smart data is null. Logged a bug. However, note that I do see values in the data tab and can modify and watch these values.
When using cursors I've been looping and then fetching into cursor records, i.e.:
FETCH emp_cursor
INTO emp_record;
emp_tab(i) := emp_record;
and then the values display in the Smart data and data tabs.
Sue

Problem get the parameter ID using debug mode

Hi Expert,
I got problem for tracking the problem which is using GET PARAMETER ID under debug mode. the scenario is like that, I go and run the BDC transaction and want to use GET PARAMETER ID 'KUN' to populate data customer code to some variable. but when I using the debug mode sometimes my variable is came from GET PARAMETER ID was missing. but if running not using the debug mode all is populated perfectly. is there any SAP notes or code I can use to continue my debuging instead using GET PARAMETER ID ? Thank you
Regards,
Koho koho

Hi BreakPoint,
Thanks for the replay, I really don't know and how to configure again. this morning I am running upload program using the BDC using the get paramater ID from posting FB03. I loading 10 documents upload. and 2 is failed to take the "get parameter id 'BLN' field var1" and var1 is blank, the other 8 document posted I can get the paramter id as well. any solution for this case. Thanks
Regards,
Koho koho

Problem connecting to Realtime system to download or run in debug mode

I have updated my LabWindows\CVI to 2013. I have a PXI system with a PXIe-8101 controller. The PXIe-controller has a real-time OS installed. I have been programming this system for a while now so I am not exactly a novice anymore. The first time I tried to install the program to my real-time target I got a message which said "LabWindows/CVI cannot connect to the real-time target." It also said " .... The version of the LabWindows/CVI Run-Time Engine for RT must be compatible with the version of the LabWindows/CVI development environment."
So I figured that was the problem. My next step was to go into MAX and sure enough was getting all sorts of flags and errors when I used the real-time software Wizard in MAX by right clicking on the Remote software and clicking on Add/Remove Software. And like I suspected there were several flags indicating a software differences. My next step was to update the software in my real-time target to resolve the problem. After I did that I compiled the code and installed it on my remote system. Everything seemed OK.
The following Monday I restarted LabWindows/CVI and made a couple of changes and tried to build and install to my real-time target. I get that same message as in the first paragraph. So I thought I might not have real-time system booted up correctly or something like that so I checked all of that and it looked OK. Next I opened up MAX and it could see my real-time target just fine.
When I had my LabWindows/CVI 2012 I did not have this problem. I think maybe there is some incompatibliity issues with my LabWindows 2013; has anyone had a similar problem? I am able to get around the problem by building the release version and copying it to the PXI with CuteFTP V9.0 but I cannot do run my program in debug mode with my LabWindows/CVI and if you may have noticed I have other problems which is in another post I put in next week. I am hoping the problems are connected and I can kill two birds with one stone LOL.
I appreciate any suggestions.
Thanks,
Don Pearce

Hello,
I want to make sure I'm understanding what you are doing in the LabVIEW project. According to the Getting Started with the LabWindows /CVI Real-Time Module manual, these are the steps to install software on the RT target:
1. Launch MAX.
2. Find and expand your RT target under the Remote Systems item in the MAX configuration tree, right-click Software, and select Add/Remove Software. When you select Add/Remove Software, MAX launches the LabVIEW Real-Time Software Wizard. This displays all the National Instruments software and drivers installed on the host computer that you can install on a selected RT target.
3. Select the software you want to install on the RT target, click the icon next to the software, and select Install the feature.
You need to install LabWindows/CVI Run-Time Engine for RT to add support for LabWindows/CVI RT applications on the RT target. This component is required for all LabWindows/CVI RT applications.
The forum post here solved this same issue by installing missing drivers based on this KnowledgeBase article.
Also, LabWindows/CVI 2013 SP1 has been released. Service Pack 1 (SP1) has many useful bug fixes (listed here), so I recommend upgrading to LabWindows/CVI 2013 SP1 if possible.
Taylor B.
National Instruments

Problem when trying to run in "Debug Mode" in JDeveloper9i

Hello All ,
i have a problem to debug my application using
JDeveloper9i .
i get an error: "fdebug.exe could not be read "
and Application error box appears .
i did the following steps in the instalation:
1) i installed the JDK 1.3
2) installed the Jdev9i from base installation zip
3) In <jdeveloper_root>\jdev\bin\ i executed the command
InstallOJVM.bat c:\jdk1.3
and get message:
"InstallOJVM successfully"
4) i wrote simple program and put a breakpoint ,
when i'm trying to run the program in "Debug mode" i get an error box message
"fdebug.exe Application Error"
The memory instruction could not be read
please help ,me to fix the problem i need the debuger option .
thanks in advance.

Do you have the file c:\jdk1.3\jre\bin\fdebug.exe, if you don't, you
need it. Look for the file in the base install directory, it should be
there and then copy it to the location above.
Michel

Problem with Debug mode and SLD

Using the config tool, we have turned the Debuggable flag to 'yes' and set the Debug mode to OFF. Now from the studio, when I enable debugging for the process, the server0 stops successfully and restarts successfully. However, during the restart, the SLD service errors out and does not get started. It encounters the following exception. I can verify the error in std_server0.out
With erred SLD service, when I try to deploy and run the webdynpro application from studio, the deploy fails with the same exception.
We tried all kinds of restart (of the engine\server instance), debuggable and debug mode setting permutations, but not successfull. (debug port is 50021)
We are having remote debug server setup (not local).
Does anybody have any suggestions???
The exception we get is:
Finished with warnings: development component 'CreateOrder'/'local'/'LOKAL'/'0.2007.11.26.14.33.54':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application local/CreateOrder and wait. Reason: Clusterwide execption: server ID 3775750:<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)

Hi Michael,
one way is to enhance the server go.bat with debug parameters. Under c:\usr\sap\<SID>\j2ee\<INSTANCE>\cluster\server\go.bat define the following params
set DEBUG_PORT=5000
set DEBUG_PARAMS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=
and add both params to the java arguments (e.g. behind the -classpath): %DEBUG_PARAMS%%DEBUG_PORT%.
Regards,
Stefan

Deployment problem in debug mode

Hi,
I developed a project in XP and moved to a laptop with vista. I am able to run (except *.exe) all files but I am not able run debug mode. I get the error:
Deploying application in domain failed; could not rename C:\program files\sun\creator2_1\sunappserver8\domains\creator\generated\xml\j2ee-modules\PAIRS5_
Log Level:     SEVERE
Logger:     javax.enterprise.system.tools.deployment
Name-Value Pairs:     _ThreadID=13;
Record Number:     2093
Message ID:     Exception occured in J2EEC Phase com.sun.enterprise.deployment.backend.IASDeploymentException
Complete Message
Could not rename C:\Program Files\Sun\Creator2_1\SunAppServer8\domains\creator\generated\jsp\j2ee-modules\PAIRS5 to C:\Program Files\Sun\Creator2_1\SunAppServer8\domains\creator\generated\jsp\j2ee-modules\PAIRS5_old
     at com.sun.enterprise.deployment.backend.ModuleDeployer.setOldDirs(ModuleDeployer.java:764)
     at com.sun.enterprise.deployment.backend.WebModuleDeployer.preRedeploy(WebModuleDeployer.java:241)
     at com.sun.enterprise.deployment.backend.ModuleDeployer.doRequestFinish(ModuleDeployer.java:158)
     at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:148)
     at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:71)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:639)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:188)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:520)
     at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:139)
     at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:168)
Is there any error I can fix??? Please help...
dr.am.mohan rao

Were you able to fix this? I am having the same issue.

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Can not view contents of variable in debug mode (version 1.1.1.5.0)

Hi
I am running on WebLogic 11R1 and using OEPE 1.1.1.5.0.
When Fast swap is enabled and I run WebLogic in debug mode using OEPE I can not view the contents of variables with the Eclipse debugger. I get the message "Expressions must contain either an expression or a block containing a well formed statement"
However, if I disable Fast swap, i can view the variable within the Eclipse debugger
Has anyone else had this problem?
Regards
Steve H

Small correction... the soon-to-be-released version of WebLogic Server that Danny was referring to is 11gR1 PatchSet 2 or 10.3.3.

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

Strange Error During Page Load in Debug Mode (only) - Please Help!

Hi All,
Data base version: oracle 11g
Apex version: Apex 4.1.1
Webserver: Apache
Need help with how to troubleshoot a Critical problem. The following error only occurs during page load in "Debug" mode. And, only occurs on a specific page within the application. A web page is served-up containing the following message and the application is blocked from running the page. The browser's (IE 8.0) back button must be clicked to proceed outside of "Debug" mode.
"Error occurred while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Debug log follows:
"S H O W: application="2006" page="6" workspace="" request="" session="500549669426301"
Computation point: Before Header
...Perform computation of item: APP_SERVER, type=FUNCTION_BODY
...Performing function body computation
...Execute Statement: declare function x return varchar2 is begin return owa_util.get_cgi_env('SERVER_NAME'); return null; end; begin wwv_flow.g_computation_result_vc := x; end;
......Result = 156.9.122.214
...Session State: Save "APP_SERVER" - saving same value: "156.9.122.214"
Processes - point: BEFORE_HEADER
...Process "GET_POSITION" - Type: PLSQL
...Execute Statement: begin wwv_flow.g_boolean := :F109_POSITION_ID IS NULL and :APP_PAGE_ID != 101; end;
......Result = FALSE
......Skip because condition or authorization evaluates to FALSE
...Process "Get JARS Sifter Log File Record Count" - Type: PLSQL
...Execute Statement: begin DECLARE vcnt NUMBER := 0; BEGIN d('Get JARS Sifter Log File Record Count'); Select count(*) into vcnt From JARS.JARS_SIFTER_LOG Where moveid = to_number(:P6_MOVEID) and sifter_status IN ('F','J'); :F1000_P6_SIFTER_LOG_COUNT := to_char(vcnt); END; end;
Custom: Get JARS Sifter Log File Record Count
...Process "Set PTM Planned Trip Status" - Type: PLSQL
......Skip because condition or authorization evaluates to FALSE
...compatibility mode - do not set mime type
...compatibility mode - do not set additional http headers
...close http header
...metadata, fetch item type settings
...metadata, fetch items
Show page template header
Rendering form open tag and internal values
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6502
......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 3027 ORA-06512: at "APEX_040100.WWV_FLOW", line 7867
...Show Error on Error Page
......Performing rollback
Rendering form open tag and internal values
...Unhandled Error while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small
...Error Backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 2707 ORA-06512: at "APEX_040100.WWV_FLOW_ERROR", line 185
End Page Rendering"
Thanks!
Bernard

All,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard

JDeveloper 11.1.2.1.0 Hangs in Debug Mode Running in Windows 7 OS

Hi All,
i am working with JDeveloper 11.1.2.1.0 version,intel core i3 -2120 CPU,@3.30GHZ,4GB RAM, Windows 7 32 bit OS
i am facing Jdeveloper Hangingness when loading BTF inside a popup and making a call to java code on any action if any debug point is avilable inside java file,JDeveloper is getting hanged and the only way to come out of this issue is by killing the process and restarting the JDeveloper.
certain cases when integrated server is started with debug mode(intial startup ) also Jdeveloper is getting hanged and there is no way to get out of this except restart.
if i see memory parameters from Java VisualVM console
Heap is avilable
and the other process are running with out any issue.
is this problem is with configuration settigns ?
what steps/settings/patches i need to follow to get out of this problem ?

is this happening after removing the system folder also?

Working in Debug mode, not after building the installation.

Hi,
I have a button to launch a form.
When I test it in debug mode, it works fine.
But, after making installation, if I do the same thing (press the button), I'm getting the following error:
Unexpected end of file while parsing name has occured. Line 1, position 2654.
Also, we have few add-ons operating on sales order.
When we open the sales order in client site through RDP, there is continuous flickering/refresh.
In in-house, we don't get that problem.
Please help me with this.
These are very critical issues for my release.
Thank you in advance.
Regards,
Geetha

Hi Geetha,
1.) button problem:
i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
2.) the flickering can be a problem of formatted searches or interacting with other addons.
when addon a. changes a field it can be that addon b. does something because of the event from addon a.
the same can happen when you have formatted searches that do something when a field changes.
ok - that are my last tipps for this day
good night
David

How to start weblogic in debug mode from BEA WebLogic Eclipse plugin

I have a problem making weblogic work with eclipse3.1. I am using a BEA WebLogic plugin to handle weblogic (start/stop) from eclipse. However I want to debug my application and I am unable to figure out a way to start my weblogic in debug mode like we do in WSAD. I tried using some other plugins also but no luck. Please suggest me a plugin to handle this or any other way of debugging my application from eclipse. I am using weblogic 8.1.

Hi,
Dev Environment
weblogic eclipse plugin 2.0 beta
weblogic server 8.1
eclipse 3.1.1
Created a server that i would like to deploy my EJB so that i can put break points on my EJB in eclipse.
How do i do it?
I managed to deploy an ear (containing the ejb) directly to the weblogic installed folder and it deployed the ejb. But the breakpoint set in eclipse is not triggered. Of course in this case as weblogic server is running the .ear file deployed manually in the file system.
Any help is appreciated.
Mel

Runing In debug mode problem

Similar Messages

Maybe you are looking for