Runn time error "CNTL_ERROR" for batch job created for program RBDAPP01

We have encounter run time error and the batch job for program RBDAPP01 was terminated.
Information on where terminated
    Termination occurred in the ABAP program "CL_GUI_CUSTOM_CONTAINER=======CP" -
     in "CONSTRUCTOR".
    The main program was "RBDAPP01 ".
    In the source code you have the termination point in line 62
    of the (Include) program "CL_GUI_CUSTOM_CONTAINER=======CM001".
    The program "CL_GUI_CUSTOM_CONTAINER=======CP" was started as a background job.
Can any member reachout help in identifying the reason.

Hi Amol,
Check the following link.
Call Transaction 'VL32N' in background: termination with Exception
Regards,
Raju.

Similar Messages

  • File Adapter Error Handling from Batch job

    Dear all,
    I'd like to handle error information by batch job process.
    However I can't find out the error flag from the file adapter.
    My XI setting is below.
    1.FIle to File conversinn by using File adapter
    2.Async setting
    3.Not use BPM
    Anyway,we only want to judge the status for XI process from Batch process like MS-DOS batch.
    Kindly please tell me the detail explanation.
    Regards,
    Masayuki.

    Hi Masayuki,
    Please take a look at these..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/09714d543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971c2543b11d1898e0000e8322d00/frameset.htm
    cheers,
    Prashanth

  • How to create batch job via a program

    hi
    i need to know how to create batch job via a program please suggest
    arora

    Wow!
    > Total Questions:  234 (138 unresolved) 
    ...and now you ask this?
    Please accept our apologies for not pointing out to you way-back-when already that there is a search functionality here at SDN and that the correct forum should be used to post questions to.
    Please read "the rules" at the top of the forum page, and search first => ask questions later.
    I take the liberty of closing your question for you.
    Kind regards,
    Julius

  • Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60

    Dear All,
      I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
    How to overcome this issue and if you already encounter this kind of problem please advice me.
    Thanks in Advance.
    Deesanth

    Hi,
      Below is my recording.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'INVFO-ACCNT'  gwa_inv_up-lifnr.
        perform bdc_field       using 'INVFO-BLDAT'  gwa_inv_up-bldat.
        perform bdc_field       using 'INVFO-XBLNR'  gwa_inv_up-xblnr.
        perform bdc_field       using 'INVFO-BUDAT'  gwa_inv_up-budat.
        perform bdc_field       using 'INVFO-MONAT'  '9'.
        perform bdc_field       using 'INVFO-BLART'  gwa_inv_up-blart.
        perform bdc_field       using 'INVFO-WRBTR'  gwa_inv_up-dmbtr.
        perform bdc_field       using 'INVFO-WAERS'  gwa_inv_up-waers.
        perform bdc_field       using 'INVFO-XMWST'  gwa_inv_up-xmwst.
        perform bdc_field       using 'INVFO-MWSKZ'  'P0'.
        perform bdc_field       using 'INVFO-SGTXT'  gwa_inv_up-sgtxt.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'BDC_OKCODE'   '=PAYM'.
        perform bdc_field       using 'INVFO-GSBER'  gwa_inv_up-gsber.
        perform bdc_dynpro      using 'SAPMF05A'     '1100'.
        perform bdc_field       using 'BDC_OKCODE'   '=BS'.
        perform bdc_field       using 'INVFO-ZLSCH'  gwa_inv_up-zlsch.
        cnt = 1.
        cnt1 = 1.
        clear gwa_inv_line.
        loop at gt_inv_up  into gwa_inv_line  where indic = 'D'
                                       and count = gwa_inv_up-count.
          if cnt1 gt 1.
            concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
            perform bdc_field using fld 'X'.
            perform bdc_dynpro using 'SAPMF05A' '1100'.
            perform bdc_field using 'BDC_OKCODE' '=0005'.
          endif.
          concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-lifnr.
          concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-shkzg.
          concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-dmbtr.
          concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-mwskz.
          concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-sgtxt.
          concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-gsber.
          concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-kostl.
          concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-posid.
          concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-fistl.
          concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-fipos.
          concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
          perform bdc_field       using fld gwa_inv_line-geber.
          perform bdc_field       using 'BDC_CURSOR' fld.
          cnt1 = cnt1 + 1.
        endloop.
        perform bdc_dynpro using 'SAPMF05A' '1100'.
        perform bdc_field  using 'BDC_OKCODE' '=BS'.
        perform bdc_dynpro      using 'SAPMSSY0' '0120'.
        perform bdc_field       using 'BDC_OKCODE' '=BP'.
        call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
                                        messages into gt_bdc_messages.
    Thanks,
    Deesanth

  • Finding batch job name for sales order change (billing block)

    hi,
    there is a tab known as billing block in the sales order.
    now a batch job ran which removed this billing block and released the sales order for delivery and PGI activities.
    we have the information regarding the date and time on which this batch job ran but the job name is unknown.
    also we tried in SM37 which gives no details.
    we have information regarding the user name of the batch job but name is unknown.
    help us in finding the batch job name with the above mentioned available data.
    it is a very high priority.
    thanks in advance
    Rahman

    Hi ,
    in SM37-->
         a)Set the Job start condition ( dates ) --You have information --YOu can keep them blank if you don't have the information. But it will fetch all the batch jobs of the user.
         b) user Name  -You have information
         c_ use '*'  in place of Job name
    Then this will fetch you the Batch Job name . Then Check step --> you can find the program name.
    You can check the Log for job details like when started and when completed.
    Regards,
    Lanka

  • Display error message in batch job log

    Hello
    I have a batch job running and I have an error coming during some validation logic.
    The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
    I cannot give it as info message as it will give wrong idea about message type.
    Is there any FM by which we can add message in job log?

    Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
    If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
    Basically I want that 'I' to be displayed as 'E'.
    Display error message in batch job log 

  • System is giving ABAP run time error while perform LT06 or create TO with r

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    Short dump has not been completely stored. It is too big.
    P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    Hi,
    Go to Tcode ST22 and mentione the dump code there and check.
    Also take help[ of Abapers to fix it.
    Thanks
    Utsav

  • ABAP run time error while perform LT06 or create TO with respect to posting

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    >> Short dump has not been completely stored. It is too big.
    >       P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
    Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
    Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

  • I Need to Create a report for batch jobs Based on Subject Area.

    Hi SAP Guru's,
    I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
    Please help me in this issue ASAP.
    Thanks in Advance.
    Krishna.

    You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

  • No batch session created for forex run error

    Hello
    We have run the forex run on 31st may and have included the reversal as well(1st June).This got completed sucessfully with revaluation and its reversal the first day of next month.After a week we reset the forex run,then it should reverse both the revaluation on 31st May and reversal posting on 1st June.However when the reset was run ,the period 31st may was closed which was noticed after the forex reset run was .We selected create postings with the batch session and also checked to create batch session if any errors.
    During the reset ,the reversal postings on 1st June got reversed but the forex revaluation on 31st may didnt get reversed(as period was closed).But there is no batch session created.
    Please let us know why the session hasnt got created or what could be the reason why batch session in SM35 is not found,if the period was closed for reversal during reset it should have created batch session.
    Please advice.

    Hi
    If your reversal posting have been generated for 1st June, check also in SM35 if there is a batch session in error under Incorrect Tab/In Process/In Background Tab of SM35
    Thanks & Regards
    Sanil Bhandari

  • Batch job creation for sending email if the invoice is aged

    Positive confirmation: Send system notification to the requestor if:
    a) An invoice is received and GR is not yet posted in the ECC system.
    b) An 'aged' invoice and GR is not yet posted in the ECC system.
    This requirement is for USA only. i.e., we have only one company code which is 8960.
    Identifiers of the invoice are
    Company Code = u20188960u2019
    Invoice Document Type = u2018R9u2019
    Use table EKBE for relationship between Invoice, Goods Receipt and Purchase Order.
    The field EKPO-BEDNR contains the Shopping Cart Number
    Implementation Strategy
    1. To send email if the invoice is aged.
    Create a program that will run as a job. This job will frequently check for invoices related to SRM Shopping Carts received from E2OPEN. If an invoice is aged and there is no Goods Receipt posted through confirmation from SRM, then an email will go out from ECC system to the requestor. Using the Shopping Cart number on PO, find the requestor information (email ID) from SRM through an RFC call. This job will run once in a day and should have a parameter in the program for the age of the Invoice.
    Both the emails should contain a link (To be taken from SRM system, to be supplied) to log into SRM system. The email will also contain the Shopping Cart number and the Description of the item, and a message to Confirm this, including age of the invoice if aged.
    Please let me know how to create the batch job.
    Regards,
    Venkat
    Edited by: VenkatG on Sep 1, 2009 3:14 PM

    Do not pass the COMMIT_WORK flag... Leave it blank. Any transaction for the data integrity, one should never use COMMIT WORK related statements. Normally SAP transactions will have the COMMIT WORK at the end of transaction which is enough for any thing that is added part of the customer exits...
    Hope this helps.
    Regards
    Anjaiah

  • From Time to Time error while executing RMAN Job

    Hi everybody,
    i have a strange problem. From time to time i recieve following error when executing a Job from Grid Control (Enterprise Manager).
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-04004: Fehler aus Recovery-Katalog-Datenbank: ORA-12170: TNS: Connect Timeout aufgetreten
    After that error the Job uses the Control File of the Database so the job runs. The strange thing for me is, that sometimes the jobs runs without problems and sometimes it gaves the error shown above.
    For clarifying. Grid Control runs on a Unix (Sun Solaris) Machine and the target Database runs on a Windows Server in a DMZ. I tried to find out what the problem is but neither on the windows server nor on the firewall side there are any problems.
    So can anybody help me finding out what the problem is?
    Any help would be appreciated.
    Greetings

    Hi sunny,
    i have tried the tnsping several times. There is no problem with this. The tnsping works without problems and in an appropriate time.
    When i issue the command on our unix machine it shows the following:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = srvxyz)(PORT = 1521))) (CONNECT_DATA = (SID = db1) (SERVICE_NAME = db1)))
    OK (10 msec)
    And when issue it on the Windows Server the follwoing output is shown:
    TNS Ping Utility for 64-bit Windows: Version 10.2.0.4.0 - Production on 26-APR-2011 10:35:45
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Parameterdateien benutzt:
    O:\ORACLE\product\10.2.0\network\admin\sqlnet.ora
    Adapter TNSNAMES zur Auflösung des Alias benutzt
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = SRVXYZ)(Port = 1521))) (CONNECT_DATA = (SID = db1)))
    OK (0 ms)
    So any other ideas??

  • Batch job creation for sales order

    Hi,
    How to create a job and schedule it so that it assigns reason of rejection to sales order line items for a particular sales org which are not delivered and after doing so, the status of the sales order is set to complete.
    regards
    sachin

    Hi,
    Execute transaction SM36
    Define Job name, Job class, Target server
    Click on 'START CONDITION' button
    Click on 'Date/Time' button
    Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
    Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
    Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
    Click on 'Job overview' button or execute SM37 transaction.
    Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
    You will now see all your scheduled JOBS.
    regards,
    mahantesh

  • No batch session created for report RFUMSV50

    if i execute the report RFUMSV50 for batch session, in sm35 no session is created.
    when i first time ran, then batch was created. i have not changed anything in settings. after that
    i posted 5 end to end cases from po to payment. now if i run report no batch session is created
    where is the problem?
    help please

    Ok
    But this report is not updating the records and no tax is transferred from interim tax account to final tax account.  Also the output of the report is showing no value. It is blank.

  • Parallel process define for batch job

    Hi,
    I would like to run a batch job with a few processes run parallel together. May I know where can i define it ? T-code ?
    Regards
    Lauran

    Hi Lauren,
    First of all there is no transaction code as such.
    First of all the report that  needs to be run in background should enable you to do parrallel processing. For that code has to be written accordingly.
    Check this link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/096e92543b11d1898e0000e8322d00/content.htm
    It gives details of function modules needed for this purpose.
    After this you need to create a variant for the report and schedule it to run in background using either SE38 (dirrectly) or by creating a job explicitily- SM36.
    A standard report that has parallel processing feature available is RBDAPP01.
    Also check transactions like BD18. They also make use of parallel processing.
    Regards.
    Ruchit.

Maybe you are looking for