"Running a Simple IMlet on the raspberry Pi"

Hi,The above title is the name of the step that I'm stuck on.Up until that moment everything was running fine(I knew it was to perfect to be true).Every time when I'm trying to run the app I'm getting "error of starting installation".
I have connected my Pi using wlan.Everything was connecting but now I'm stuck and I really don't know what to do.Please help.

Hi!
Could you please check the FAQ dedicated to the problems connecting to the RPi board. Here FAQ: failed to connect to the Java on Raspberry
Andrey

Similar Messages

How can I run multiple midlets in parallel via the raspberry pi cmd line interface?

I am trying to run multiple midlets at the same time on my raspberry pi.
From netbeans point of view I am able to deploy and run them. But for my applications I want to auto start multiple midlets on the raspberry pi.
On the cmd line interface of java me 8 I have commands to install a midlet and run a midlet.
But i am not able to start multiple midlets.
Can someone explain to me how I can do this?

Hi!
Could you please clarify a bit: do you want auto-start behavior of your applications or be able to start them manually via CLI?
Because "auto start" means that applications are started by Java once you start Java itself and in order to make it happen you shall mark your applications appropriately (check MEEP spec for "MIDlet-<n>-Type" application attribute value "autostart"). If this is the case, have you added this attribute?
If you want to run them manually you should be ale to do so via CLI just the same way as you start one application (via "ams-run" command).
Either way, could you also please clarify what are the symptoms of the problem? E.g. on CLI what are the messages you receive back (if start is unsuccessful what is the error message etc).
In addition please mind that there is limit on number of simultaneous VM tasks. If I'm not mistaken by default it is 6: 2 of them are used by system code and each running MIDlet consumes 1 VM task. If you want to increase it please change the value of "MAX_ISOLATES" property in jwc_properties.ini file. The maximum supported value is 16
Regards,
Andrey

Error 500--Internal Server Error when running a simple ADF application

Hello,
I installed Jdeveloper+ADF (jdevstudio11112install.exe) and i try to run a simple ADF app (which is already running for one of my colleagues) and it boms out with these errors:
java.lang.NoSuchMethodError: oracle.jbo.SessionContextManager.removeCurrentSession()V
     at oracle.adf.model.BindingRequestHandler.endRequest(BindingRequestHandler.java:283)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:196)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I ve installed the 10th time just to make sure i did not miss anything.
Any ideas?
fyi that while installing, the % complete jumps from 40% suddenly to 72% and then to 97% .. Till 40% complete, its slow and steady.
I ve downloaded several times fresh and still the same issue.
I am not sure how i m missing any missing any classpath or files.

This is what is happening when i start the integrated weblogic server and run the adf application.
[Waiting for the domain to finish building...]
[02:36:31 PM] Creating Integrated Weblogic domain...
[02:38:15 PM] Extending Integrated Weblogic domain...
[02:38:49 PM] Integrated Weblogic domain processing completed successfully.
*** Using port 7101 ***
"C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;C:\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;c:\gallup\source10g\fmb\;c:\ora10gforms\forms\java\;C:\ora10gforms\j2ee\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;C:\ora10gforms\jlib\repository.jar;C:\ora10gforms\jlib\ldapjclnt10.jar;C:\ora10gforms\jlib\debugger.jar;C:\ora10gforms\jlib\ewt3.jar;C:\ora10gforms\jlib\share.jar;C:\ora10gforms\jlib\utj.jar;C:\ora10gforms\jlib\zrclient.jar;C:\ora10gforms\reports\jlib\rwrun.jar;C:\ora10gforms\forms\java\frmwebutil.jar;
PATH=C:\MIDDLE~1\patch_wls1032\profiles\default\native;C:\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\MIDDLE~1\WLSERV~1.3\server\bin;C:\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\MIDDLE~1\JDK160~1.5-3\jre\bin;C:\MIDDLE~1\JDK160~1.5-3\bin;C:\ora10gforms\jdk\jre\bin\classic;C:\ora10gforms\bin;C:\ora10gforms\jre\1.4.2\bin\client;c:\ora10gclient\bin;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;c:\gallup\source10g;C:\Program Files\ImageConverter Plus;;C:\WINDOWS\system32\WindowsPowerShell\v1.0;;C:\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
Starting WLS with line:
C:\MIDDLE~1\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=C:\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=\modules\oracle.ossoiap_11.1.1,\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\JAYARA~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Nov 18, 2009 2:38:55 PM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 14.0-b16 from Sun Microsystems Inc.>
<Nov 18, 2009 2:38:55 PM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
<Nov 18, 2009 2:38:57 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 18, 2009 2:38:57 PM CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 18, 2009 2:38:57 PM CST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Nov 18, 2009 2:39:04 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 18, 2009 2:39:12 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 18, 2009 2:39:12 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 18, 2009 2:40:00 PM CST> <Error> <HTTP> <BEA-101216> <Servlet: "Spy" failed to preload on startup in Web application: "dms.war".
java.lang.NoSuchMethodError: oracle.dms.collector.Collector.<init>(Ljava/util/concurrent/ScheduledExecutorService;Loracle/dms/config/CollectorConfig;Loracle/dms/util/TopoNodeIDInfo;)V
     at oracle.dms.aggregator.AggreStorage.<init>(AggreStorage.java:61)
     at oracle.dms.app.DomainInitializer.init(DomainInitializer.java:100)
     at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:278)
     at oracle.dms.app.DmsSpy.init(DmsSpy.java:129)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     Truncated. see log file for complete stacktrace
>
<Nov 18, 2009 2:40:00 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'DMS Application [Version=11.1.1.1.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "Spy" failed to preload on startup in Web application: "dms.war".
java.lang.NoSuchMethodError: oracle.dms.collector.Collector.<init>(Ljava/util/concurrent/ScheduledExecutorService;Loracle/dms/config/CollectorConfig;Loracle/dms/util/TopoNodeIDInfo;)V
     at oracle.dms.aggregator.AggreStorage.<init>(AggreStorage.java:61)
     at oracle.dms.app.DomainInitializer.init(DomainInitializer.java:100)
     at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:278)
     at oracle.dms.app.DmsSpy.init(DmsSpy.java:129)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1915)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1889)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1807)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:39)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.NoSuchMethodError: oracle.dms.collector.Collector.<init>(Ljava/util/concurrent/ScheduledExecutorService;Loracle/dms/config/CollectorConfig;Loracle/dms/util/TopoNodeIDInfo;)V
     at oracle.dms.aggregator.AggreStorage.<init>(AggreStorage.java:61)
     at oracle.dms.app.DomainInitializer.init(DomainInitializer.java:100)
     at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:278)
     at oracle.dms.app.DmsSpy.init(DmsSpy.java:129)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     Truncated. see log file for complete stacktrace
>
<Nov 18, 2009 2:40:02 PM CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.18.59:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 18, 2009 2:40:10 PM CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 82253 ms.
IntegratedWebLogicServer started.
[Running application MDMD on Server Instance IntegratedWebLogicServer...]
[02:44:03 PM] ---- Deployment started. ----
[02:44:03 PM] Target platform is (Weblogic 10.3).
[02:44:05 PM] Retrieving existing application information
[02:44:06 PM] Running dependency analysis...
[02:44:06 PM] Deploying 2 profiles...
[02:44:09 PM] Wrote Web Application Module to C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\MDMD\ViewControllerWebApp.war
[02:44:10 PM] Wrote Enterprise Application Module to C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\MDMD
[02:44:10 PM] Deploying Application...
<Nov 18, 2009 2:44:11 PM CST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application MDMD is not versioned.>
<FacesDatabindingConfigurator><_installFacesBindingDefFactory>
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator._installFacesBindingDefFactory(FacesDatabindingConfigurator.java:306)
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator._setupAdfDatabindingForJsf(FacesDatabindingConfigurator.java:110)
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator.init(FacesDatabindingConfigurator.java:53)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:400)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.init(RegistrationFilter.java:53)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.init(TrinidadFilterImpl.java:103)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.init(TrinidadFilter.java:54)
     at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:332)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:98)
     at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1805)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3045)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1397)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoSuchMethodError: oracle.jbo.uicli.mom.JUMetaObjectManager.insertDefinition(Ljava/lang/String;Ljava/lang/Object;Z)V
     at oracle.jbo.uicli.mom.JUMetaObjectManager.updateJUMomDef(JUMetaObjectManager.java:110)
     at oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMomDef(JUMetaObjectManager.java:102)
     at oracle.jbo.uicli.mom.JUMetaObjectManager.getFactoryMap(JUMetaObjectManager.java:935)
     at oracle.jbo.uicli.mom.JUMetaObjectManager.registerDefinitionFactory(JUMetaObjectManager.java:964)
     ... 49 more
[02:44:32 PM] Application Deployed Successfully.
[02:44:32 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[02:44:32 PM] http://ip:7101/Option1-ViewController-context-root
[02:44:32 PM] Elapsed time for deployment: 28 seconds
[02:44:32 PM] ---- Deployment finished. ----
Run startup time: 28516 ms.
[Application MDMD deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://ip:7101/Option1-ViewController-context-root/faces/Option1
<Nov 18, 2009 2:44:52 PM CST> <Error> <HTTP> <BEA-101020> <[ServletContext@13097048[app:MDMD module:Option1-ViewController-context-root path:/Option1-ViewController-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NoSuchMethodError: oracle.jbo.SessionContextManager.removeCurrentSession()V
     at oracle.adf.model.BindingRequestHandler.endRequest(BindingRequestHandler.java:283)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:196)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     Truncated. see log file for complete stacktrace
>
<Nov 18, 2009 2:44:52 PM CST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Nov 18, 2009 2:44:52 PM CST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Nov 18, 2009 2:44:52 PM CST SERVER = DefaultServer MESSAGE = [ServletContext@13097048[app:MDMD module:Option1-ViewController-context-root path:/Option1-ViewController-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NoSuchMethodError: oracle.jbo.SessionContextManager.removeCurrentSession()V
     at oracle.adf.model.BindingRequestHandler.endRequest(BindingRequestHandler.java:283)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:196)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = ORFNAGAJ470a TXID = CONTEXTID = TIMESTAMP = 1258577092563
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\user\\Application] at column [75]
DIA-48447: The input path [C:\\Documents and Settings\\user\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
     at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
     at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
     at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
     at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
     at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
     at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
     at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
     at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
     at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
     at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
     at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\user\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\user\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2009-11-18 14:44:52.579 -06:00" ecid="0000IK92_zZ9pYG6yz6iMG1B15hi000005"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\user\\Application] at column [75]
DIA-48447: The input path [C:\\Documents and Settings\\user\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
     at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
     ... 19 more
ERROR ON BROWSER
Error 500--Internal Server Error

How to create a simple app using the MVC approach?

Hello gurus i'm trying to learn the SAPUI5 and i'm trying to create a simple app using the MVC i created the app and trying to add a lable to the view but there is nothing appear when i run it the code for the HTML page
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
<script src="https://sapui5.hana.ondemand.com/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m"
data-sap-ui-theme="sap_bluecrystal">
</script>

<script>
sap.ui.localResources("mytestapp");
var view = sap.ui.view({id:"idshell1", viewName:"mytestapp.shell", type:sap.ui.core.mvc.ViewType.JS});
view.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>
the code for the view
sap.ui.jsview("mytestapp.shell", {
/** Specifies the Controller belonging to this View.
* In the case that it is not implemented, or that "null" is returned, this View does not have a Controller.
* @memberOf mytestapp.shell
getControllerName : function() {
return "mytestapp.shell";
/** Is initially called once after the Controller has been instantiated. It is the place where the UI is constructed.
* Since the Controller is given to this method, its event handlers can be attached right away.
* @memberOf mytestapp.shell
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
oLabel.placeAt("content");
i dont know what is wrong or if i should use a container to display my controls
any help will be appreciated
thanks in advance

Hi,
Instead of oLabel.placeAt("content"); use return oLabel;
so it will as below,
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
return oLable;
Regards,
Chandra

How I run a shell script from the scheduler on 10.2.0.2.0 ?

Hello Oracle People,
I'd like to run a shell script from the Scheduler in my 10g database.
Right now it is a simple shell script.
Eventually it will wrap RMAN commands to back up my DB.
I wrote a simple pl/sql script to create a job:
-- cr_job10.sql
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'my_backup_job',
job_type => 'EXECUTABLE',
job_action => '/h/oracle/scripts/tst.sh',
start_date => '06-SEP-07 5.33.00PM US/Pacific',
repeat_interval => 'FREQ=DAILY',
end_date => '08-SEP-07 4.00.00PM US/Pacific',
enabled => TRUE,
comments => 'My Backup Job');
END;
I see no errors when I run the above procedure.
I checked DBA_SCHEDULER_JOBS and the job is in there.
The scheduler, though, errors out with an error which I see in a trace file:
/h/oracle/admin/orcl/bdump/orcl_j000_22396.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /h/oracle/product/10r2
System name: SunOS
Node name: sol
Release: 5.10
Version: Generic_118855-14
Machine: i86pc
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 22396, image: oracle@sol (J000)
*** ACTION NAME:(MY_BACKUP_JOB) 2007-09-06 17:33:00.175
*** MODULE NAME:(DBMS_SCHEDULER) 2007-09-06 17:33:00.175
*** SERVICE NAME:(SYS$USERS) 2007-09-06 17:33:00.175
*** CLIENT ID:() 2007-09-06 17:33:00.175
*** SESSION ID:(140.13520) 2007-09-06 17:33:00.175
*** 2007-09-06 17:33:00.175
ORA-12012: error on auto execute of job 53267
ORA-27369: job of type EXECUTABLE failed with exit code: 274662
I googled on this:
ORA-27369: job of type EXECUTABLE failed with exit code: 274662
Google returned only 1 hit.
There, I see some evidence that I need to configure something inside
of Oracle to run shell scripts from the scheduler, but possibly just
for machines running windows. I'm running Solaris.
Do any of you know what I need to configure inside of Oracle to
run shell scripts from the scheduler?
-Owen

Hello people,
I should have added this bit of information:
"The script runs fine from oracle's crontab."
"The script runs fine from a shell owned by oracle."
I'm getting responses telling me to check my env variables and permissions
which would be helpful to a UNIX novice.
I have a feeling that no one is using the scheduler to run RMAN scripts.
Tim Hall suggested I take a close look at these files:
$ORACLE_HOME/rdbms/admin/externaljob.ora
$ORACLE_HOME/bin/extJob
Currently I'm setup like this:
bash sol root /h/oracle/product/10r2/bin 31 #
bash sol root /h/oracle/product/10r2/bin 31 # ll $ORACLE_HOME/rdbms/admin/externaljob.ora
-rw-r--r-- 1 root dba 52 Sep 7 15:29 /h/oracle/product/10r2/rdbms/admin/externaljob.ora
bash sol root /h/oracle/product/10r2/bin 32 #
bash sol root /h/oracle/product/10r2/bin 32 # cat $ORACLE_HOME/rdbms/admin/externaljob.ora
# externaljob.ora
run_user = rman
run_group = rman
bash sol root /h/oracle/product/10r2/bin 33 #
bash sol root /h/oracle/product/10r2/bin 33 #
bash sol root /h/oracle/product/10r2/bin 33 #
bash sol root /h/oracle/product/10r2/bin 33 # ll $ORACLE_HOME/bin/ext*
-rwsr-x--- 1 rman dba 30388 Sep 21 2006 /h/oracle/product/10r2/bin/extjob*
-rwsr-x--- 1 rman dba 30392 Sep 21 2006 /h/oracle/product/10r2/bin/extjobo*
-rwsr-x--- 1 rman dba 34468 Sep 21 2006 /h/oracle/product/10r2/bin/extproc*
-rwxr-xr-x 1 oracle dba 300 Sep 21 2006 /h/oracle/product/10r2/bin/extusrupgrade*
bash sol root /h/oracle/product/10r2/bin 34 #
bash sol root /h/oracle/product/10r2/bin 34 #
bash sol root /h/oracle/product/10r2/bin 34 #
On my system, the user 'nobody' has no shell so I cannot use nobody.
I created a user named rman:
bash sol root /h/oracle/product/10r2/bin 34 #
bash sol root /h/oracle/product/10r2/bin 34 #
bash sol root /h/oracle/product/10r2/bin 34 # su - rman
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
$
$ id
uid=220(rman) gid=220(rman)
$
$
$ date
Fri Sep 7 16:30:03 PDT 2007
$
$
Jared points out that rman needs access to extproc:
$ ls -la /h/oracle/product/10r2/bin/extproc
-rwsr-x--- 1 rman dba 34468 Sep 21 2006 /h/oracle/product/10r2/bin/extproc
$
$
Here is a demo of rman running his script:
bash sol root /h/oracle/product/10r2/bin 35 # su - rman
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
$
$
$ ls
scripts
$
$
$ scripts/tst.sh
$
$
$ cat scripts/tst.sh
#! /bin/sh
/usr/bin/date > /tmp/tst.sh.out.txt 2>&1 &
exit 0
$
$
$ cat /tmp/tst.sh.out.txt
Fri Sep 7 16:31:23 PDT 2007
$
$ rm /tmp/tst.sh.out.txt
$
I am focused on this error:
ORA-27369: job of type EXECUTABLE failed with exit code: 274662
And I am focused on this exit code: 274662
What does 274662 mean?
If the Scheduler gives me an error like "274662" rather than some English,
it's obvious to me the Scheduler is a POS and I should not use it.
And of course,
If I cannot run RMAN from Oracle Scheduler, I'll use cron.
-Owen

XletApplication Manager - How to run Xlet, with spaces in the path

Hi
I am trying to use J9 implementation on PocketPC to run a simple Xlet. When I enter a path as below, the Xlet App manager fails to find the application.
37#"\SD Card\IBM PPRO10\bin\j9.exe" -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename:"\SD Card\ANSPOD\bin\PODXlet.txt"
However, if I use a path that doesnt have any space, it works fine.
Any hints ?

Have you tried enclosing the entire shortcut in quotes?
37#"\SD Card\IBM PPRO10\bin\j9.exe -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename: \SD Card\ANSPOD\bin\PODXlet.txt"
Or, if that doesn't work, maybe using a %20 in place of the space in the folder.
Or, maybe this:
37#"\'SD Card'\'IBM PPRO10'\bin\j9.exe" -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename:"\'SD Card'\ANSPOD\bin\PODXlet.txt"

I have some software problems of running matlab script node in the LabVIEW program.

Hi there,
I wrote a simple matlab code, like x= 1, y = x*2. Then I tried to put them into matlab script node in LabVIEW.
However, when I ran the program, I couldn't run and Labiew show some error.
Then I tried the method talked before on this forum. Please see the following link.
http://forums.ni.com/ni/board/message?board.id=MathScript&thread.id=571
I followed the instruction and open the "command prompt," type some commands then I could run the program, and simultaneously, the LabVIEW program open "Matlab command line window" and run my labview code. However, if I didn't use the command prompt, the "matlab command window" will not be opened by running the labview program. It would just show some error. And even if I turn on the matlab program in advance, I still couldn't run the labview program.
Is there any effecient way to deal with this problem without using "command prompt?" Because I try another PC with both matlab and labview installed on it, I "can" run my simple matlab script node on it, and it will open the matlab command line window automatically by running my code. Therefore, I thought there might be some software linking problems in the previous PC I used . Do you have any ideas?
Thanks in advacne.

This board is for Mathscript, but you seem to have a matlab problem. You should probably post in the LabVIEW forum instead.
What is your LabVIEW version? What is you matlab version?
LabVIEW Champion . Do more with less code and in less time .

Automated install Arch x86_64 root-file system the "Raspberry" way..

Dear Archers,
I am currently deeply interested in installing Arch as dual boot on my
current x86_64 system.
And yes, there is plenty information regarding this subject in Arch wiki's.
However...
I would like to automate the installation the "Raspberry-Pi" -way.
Details on the "Installation tab" of:
http://archlinuxarm.org/platforms/armv6/raspberry-pi.
As you can see, the installation steps are easy to automate, in my opinion.
That's why I wrote an automation script for this purpose..
The information further suggests that there is a root-filesystem for
Arch named: 'ArchLinuxARM-rpi-latest.tar.gz.'
Unfortunately, I don't think this root system will function on x86_64 systems..
So I researched if there was a root filesystem for Arch x86_64 and found filenames like 'root-image.fs.sfs' 'core.db' 'core.img'.
But I'm unsure if these archives/images really contain a rootfilesystem similar to the ArchARm system.
Therefore my question:
Does anybody know if there is a similar root filesystem for x86_64 so I can reproduce the "rpi-way" installation for x86_64 systems?
Kind regards,
Kees Epema

You are definitely not going to be able to simply dd arch to your machine unless you create an image to do so. Even then, that image would become old and stale pretty quickly, possibly leading to problems getting the system up to date.
In my opinion, the raspberry pi way to simply dd'ing an image to an SD card is a disservice to the ArchlinuxARM users. Though seemingly the proper way to get a system running on a raspberry pi, it masks the install process and leaves the user without a clue as to what would have gone into creating the system.
Go read the beginners guide. Use a virtual machine to practice if you need. Shortcuts are not going to help you with Arch.

How to not run a gateway instance if the target server is down

I have a DirectoryWatcher gateway instance that runs every 10
min looking to do a series of actions when a file is added to a
directory on another server. This other server is down periodically
and my gateway instance fails. Then when the server comes back up,
I have to restart the gateway because it has failed. How do I tell
the gateway instance to not run if the server it is looking at is
down or the directory in this case is unavailable?

listeners have a timeout period. if the target computer is going through a reboot cycle, the downtime should be short enough that you can setup a timeout. Set one that is long enough so that you do not trigger a failure event, and the timepsan allows for the target server to come back online before the timeout expiration.
Another way that is more robust is to create a seperate application, perhaps one built on Visual Studio or even a scripthost that does a simple ping of the destination server every 10 seconds or so. When the server is not found, you can do a shutdown of your CF. (you can shutdown any application from another application). Once you can re-ping the server, relaunch your gateway listener. If the listener cannot support what you want to do, just write another program that will perform your logic for you.
People have it within them to change
Proud user of Adobe products, and webmaster of the Theravive counselor network , built on Dreamweaver, and Photoshop. Toss in a little Visual Studio, but who's keeping score!

Can we Run a simple SQL statement from OBIEE Middle Tier node

Hi
i am working in OBIEE 11g environment. Database is installed on one node and Middle tier (BI services ) in other node,
Can i use any utility to run a simple SQL statement from Middle tier ?
Thanks
Reddy

Any utility means?
We can create an ODBC connection on the BI server and run the sql.
Mark if helps.

How to Run a simple servlet "HelloWorld.java" in JBoss 3.0 ?

Dear all,
I am a beginner and I want to run a simple "HelloWorld.java" servlet .
I need to use JBoss 3.0 .
After I run this simple servlet, I need to use EJB-Servlet-JSP to implement MVC .
I have the servlet code and I am able to compile it.
But I dont know how to proceed as to where to put the class files , where do I specify an alias for my servlet and what modifications I need in Web.xml,Jboss.xml,Application.xml ?
I do not anything about tools like Ant or Xdoclet so need to proceed without them.Please alos let me know where I can fond complete info about Ant and Xdoclet .
Thanx in Advance,
Sujith

I am not sure of the JBoss package that you are using. If you are using the JBoss-Tomcat package, here's the solution. Create either a .war file or create a directory with the name <your-webapp>.war under <jboss-root>/server/default/deploy. If you are creating a war file, you have to place that war file in the same directory. JBoss-Tomcat will keep looking at this directory for new files or updates to files and deploys/re-deploys as required.
The contents of the war file should be something like this.
WEB-INF - directory
WEB-INF/classes - your servlet classes
WEB-INF.web.xml - your configuration. Here you can specify the servlet name, class and URI mapping.
Now, you can call your servlet using the browser in this way: http://localhost:8080/<your-webapp>/servlet/<servlet-alias>. Here the <your-webapp> is the prefix of the .war file.
Resources:
Ant - http://jakarta.apache.org/ant/
Xdoclet - http://xdoclet.sourceforge.net/

How to Run a simple program using JMS Queue.!!

Hi All,
I am trying to run simple program on JMS Queue.
Using SOA Suite 10.1.3.2
I created a connection factory and queue using EM.
Connection Factory => Domain : Queue JNDI Location : jms/sidConnectionFactory
Queue Name : SidQueue JNDI Location : jms/SidQueue
Tried running a simple java class to send the messages to queue.[Pls find the file attached].
Getting this error
javax.naming.NamingException: META-INF/application-client.xml not found (see J2EE spec, application-client chapter for requirements and format of the file)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getRequiredClasspathResource(ApplicationClientInitialContextFactory.java:239)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getArchive(ApplicationClientInitialContextFactory.java:161)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:111)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
Can some one tell me how i need to create this file and where to place this[i.e is this need to be placed in my project or some directory structure of <SOA-HOME>
Thx,
Siddhardha.
Code:
package demo;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.Properties;
import javax.jms.*;
import javax.naming.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class JMSQueue {
public static void main(String args[])
QueueConnection queueConnection;
QueueSession queueSession;
//private MessageProducer producer;
QueueSender queueSender;
try {
String message = "Test";
String connectionFactoryName = "jms/sidConnectionFactory";
String destinationName = "jms/SidQueue";
/*Do i need to use this .......
* If so where is the error in below statements...
* Properties env = new Properties( );
// ... specify the JNDI properties specific to the vendor
env.put(Context.SECURITY_PRINCIPAL, "admin");
env.put(Context.SECURITY_CREDENTIALS, "welcome");
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.evermind.server.ApplicationClientInitialContextFactory");
env.put(Context.PROVIDER_URL,
"ormi://localhost:23791");
Context ctx = new InitialContext();
// Get the connection factory.
QueueConnectionFactory cf = (QueueConnectionFactory)ctx.lookup(connectionFactoryName);
// Get the destination.
Queue destination = (Queue) ctx.lookup(destinationName);
// Use the connection factory to create a connection.
queueConnection = cf.createQueueConnection();
// Start the connection.
queueConnection.start();
// Use the connection to create a session.
queueSession = queueConnection.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
// Use the session and destination to create a message producer and a message consumer.
//producer = queueSession.createProducer(destination);
queueSender = queueSession.createSender(destination);
TextMessage msg = queueSession.createTextMessage(message);
queueSender.send(msg);
queueSession.close();
queueConnection.close();
catch (Exception ex) {
ex.printStackTrace();
* Attached following libraries to the Project
* jms.jar
* optic.jar
* oc4jclient.jar
*/

Hi,
You need to change the INITIAL_CONTEXT_FACTORY to com.evermind.server.RMIInitialContextFactory.
Regards,
Sandeep

How to run a simple shell comnd line on cygwin thru java class ?

Hi
I want to run a simple shell command "dir" on cygwin thru java class. My code is as follows :-
public class CygJava {
     public static void main (String args[]){
          File workDir = new File("c:/cygwin/bin");
          try {
               Runtime systemShell = Runtime.getRuntime();
               Process shellOutput = systemShell.exec("dir", null, workDir);
                                             InputStreamReader isr = new InputStreamReader(shellOutput.getInputStream());
               BufferedReader br = new BufferedReader (isr);
               String line = null;
               System.out.println("<OUTPUT>");
               while((line = br.readLine()) != null ) {
               System.out.println(line);
               System.out.println("</OUTPUT>");
               int exitVal = shellOutput.waitFor();
               System.out.println("Process Exit Value : "+exitVal);
          }catch (IOException ioe) {
               System.err.println(ioe);
          } catch (Throwable t) {
               t.printStackTrace();
On running this program , i get the error as :-
java.io.IOException: CreateProcess: dir error=2
Could anyone tell me as to why is this error occuring ?
Thanks

Hi guys,
I am trying to launch a linux-environment application using cygwin from my java application.
I already included the c:\cygwin path in the environment path of my computer, so if i run cygwin from windows console everything goes fine. But if i do the same from my java application, i get an error message:
java.io.IOException: CreateProcess: cygwin error=2
     at java.lang.ProcessImpl.create(Native Method)
     at java.lang.ProcessImpl.<init>(ProcessImpl.java:81)
     at java.lang.ProcessImpl.start(ProcessImpl.java:30)
     at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
     at java.lang.Runtime.exec(Runtime.java:591)
     at java.lang.Runtime.exec(Runtime.java:429)
     at java.lang.Runtime.exec(Runtime.java:326)
     at prueba.Prueba.jButton1_actionPerformed(Prueba.java:94)
     at prueba.Prueba_jButton1_actionAdapter.actionPerformed(Prueba.java:151)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:5501)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)I will appreciate a lot some help :)
Thankx

Simple name for the portal path

Hello.
Is is possible to setup Apache as to have a simple name for the http:\\servername\pls\etc.etc.etc. address? How do i set this up?
Thx.

Thx, but i wanted something like this:
the address
http://<servername>:<portnumber>/pls/portal30/etc.etc.etc.
should be contacted only by typing the following address:
http:/portal
The homepage of Portal should be shown then. I managed it now, but that is not the right way. Normally, when you type the servername, you will see an information page on Apache. I edited that page, so that it redirects in zero seconds to the url where portal is running.
But that is not a real nice way to do it. Any ideas?

Can I run gcc compiled programs in the terminal?

I compiled a simple C program in the terminal using gcc 4.0 from the Xcode 2.2 distribution. I used gcc a.c at the command line and the compiler produced a.out. When I type a.out at the command line, I get the message
tcsh: a.out: Command not found.
Am I missing a step in the comilation phase? Is it possible to run gcc compiled programs in the terminal? I get the same results in the bash shell and when using X11.
eMac G4 Mac OS X (10.4.6)

./a.out is correct. Your current directory in not in your $PATH. You could add "." to the PATH, but that is considered a security compromise, because an unexpected command could be introduced either maliciously or inadvertently. (I have seen this happen.)

"Running a Simple IMlet on the raspberry Pi"

Similar Messages

Maybe you are looking for