XletApplication Manager - How to run Xlet, with spaces in the path

Hi
I am trying to use J9 implementation on PocketPC to run a simple Xlet. When I enter a path as below, the Xlet App manager fails to find the application.
37#"\SD Card\IBM PPRO10\bin\j9.exe" -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename:"\SD Card\ANSPOD\bin\PODXlet.txt"
However, if I use a path that doesnt have any space, it works fine.
Any hints ?

Have you tried enclosing the entire shortcut in quotes?
37#"\SD Card\IBM PPRO10\bin\j9.exe -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename: \SD Card\ANSPOD\bin\PODXlet.txt"
Or, if that doesn't work, maybe using a %20 in place of the space in the folder.
Or, maybe this:
37#"\'SD Card'\'IBM PPRO10'\bin\j9.exe" -jcl:ppro10 com.ibm.oti.xlet.XletApplicationManager -filename:"\'SD Card'\ANSPOD\bin\PODXlet.txt"

Similar Messages

Bug: can't access static files with space in the path

Please let me know if this a a wrong place to file bug reports.
I installed webserver7u4 and when I try to access a static file within my war which contains a space in the path, I get HTTP404.
$ ls webserver7/https-myapp/web-app/myapp/_default/images/ddtree/black\ spinner/1.png
webserver7/https-myapp/web-app/myapp/_default/images/ddtree/black spinner/1.png
$ wget -O /dev/null "http://localhost:8080/images/ddtree/black spinner/1.png
"--13:47:06-- http://localhost:8080/images/ddtree/black%20spinner/1.png
=> `/dev/null'
Resolving localhost... 127.0.0.1, ::1
Connecting to localhost|127.0.0.1|:8080... connected.
HTTP request sent, awaiting response... 404 Not found
13:47:06 ERROR 404: Not found.Now, if I create a symlink to a path that contains url encoded space, everything works:
$ ls -l webserver7/https-myapp/web-app/myapp/_default/images/ddtree/black%20spinner
lrwxrwxrwx 1 root root 13 Aug 1 2008 webserver7/https-myapp/web-app/myapp/_default/images/ddtree/black%20spinner -> black spinner
$ wget -O /dev/null "http://localhost:8080/images/ddtree/black spinner/1.png"
--13:49:37-- http://localhost:8080/images/ddtree/black%20spinner/1.png
=> `/dev/null'
Resolving localhost... 127.0.0.1, ::1
Connecting to localhost|127.0.0.1|:8080... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,446 (1.4K) [image/png]
100%[======================================================================== =======================================>] 1,446 --.--K/s
13:49:37 (89.76 MB/s) - `/dev/null' saved [1446/1446]So to me it appears that webserver doesn't decode the path before searching the local file system, which to me looks like a bug.
Let me know if you need more info.
cheers,
Igor

HTTP/1.1 RFC [http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.2|http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.2]
3.2 Uniform Resource Identifiers
URIs have been known by many names: WWW addresses, Universal Document Identifiers,
Universal Resource Identifiers [3], and finally the combination of
Uniform Resource Locators (URL) [4] and Names (URN) ... where
3 is a link to [http://www.ietf.org/rfc/rfc1630.txt|http://www.ietf.org/rfc/rfc1630.txt] section BNF for specific URL schemes
httpaddress              h t t p :   / / hostport [ / path ] [ ?search ]
path                   void | segment [ / path ]
segment                xpalphas
xpalphas               xpalpha [ xpalphas ]
xpalpha                xalpha | +
xalpha                 alpha | digit | safe | extra | escape
alpha                  a | b | c | d | e | f | g | h | i | j | k |
                         l | m | n | o | p | q | r | s | t | u | v |
                         w | x | y | z | A | B | C | D | E | F | G |
                         H | I | J | K | L | M | N | O | P | Q | R |
                         S | T | U | V | W | X | Y | Z
digit                  0 |1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
safe                   $ | - | _ | @ | . | & | + | -
extra                  ! | * | " | ' | ( | ) | ,
escape                 % hex hex
hex                    digit | a | b | c | d | e | f | A | B | C | D | E | F{code}
4 is a link to RFC 1738 Uniform Resource Locators (URL)
[http://www.ietf.org/rfc/rfc1738.txt|http://www.ietf.org/rfc/rfc1738.txt] section 5. BNF for specific URL schemes
has :
{code}
httpurl        = "http://" hostport [ "/" hpath [ "?" search ]]
hpath          = hsegment *[ "/" hsegment ]
hsegment       = *[ uchar | ";" | ":" | "@" | "&" | "=" ]
uchar          = unreserved | escape
escape         = "%" hex hex
hex            = digit | "A" | "B" | "C" | "D" | "E" | "F" |
                             "a" | "b" | "c" | "d" | "e" | "f"
unreserved     = alpha | digit | safe | extra
alpha          = lowalpha | hialpha
lowalpha       = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" |
                 "i" | "j" | "k" | "l" | "m" | "n" | "o" | "p" |
                 "q" | "r" | "s" | "t" | "u" | "v" | "w" | "x" |
                 "y" | "z"
hialpha        = "A" | "B" | "C" | "D" | "E" | "F" | "G" | "H" | "I" |
                 "J" | "K" | "L" | "M" | "N" | "O" | "P" | "Q" | "R" |
                 "S" | "T" | "U" | "V" | "W" | "X" | "Y" | "Z"
digit          = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |"8" | "9"
safe           = "$" | "-" | "_" | "." | "+"
extra          = "!" | "*" | "'" | "(" | ")" | ","
{code}
I do not see space in these RFCs for httpurl.

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Programmatic launch of reader 11.0.3 won't open file with spaces in the path?

The application I work on uses a PDF file for online help. We programmatically launch the help file into the user's PDF viewer. The path to the help file may have spaces in the directory names or filename. With previous versions of Adobe Reader, it would launch just fine (path passed in on the command line). However, with 11.0.3, I find that if I don't include an extra set of quotation marks around the path, it fails to open when there are spaces in the directory name. What changed between then and now to cause this problem? If I add extra quotation marks, will users with an older version of Reader not be able to open the file?
Edit -- running in Windows 7, launched from C# .NET 3.5.

benten2000 wrote:
Install is fine and the icon is shown on the desktop and pdf files icons also change to Acrobat.
I seem to have missed this part when reading your original post. See if anything in this article fixes your problem: http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

Unable to access files with spaces in the path

Hi all, I am accessing files which reside on the server using a java applet.
The typical path of a file could be:
http://192.168.0.2/agat/data/AF190701 0003.agt
(not the space in the filename).
When I try to open this file using a URL object:
URL file = new URL(filename);
BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));
I get exception 400 ( I think) whihc I assume is file cant be found.
However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.
What should I do to make the applet able to open paths with spaces? Or is this just not possible.
I did try including quotes with the special characte precessor:
filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""
But this didnt work either, please could someone tell what I need.
Thanks.

Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.
while (file.lastIndexOf(" ") >0)
String temp;
int num = file.lastIndexOf(" ");
temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
file = temp;
}

Open a form with space on the path with form builder from a batch

Hi,
I cannot open a form from a batch on Windows if the absolute path contains spaces.
For example, if I try to open a form in "C:\" from cmd with C:\ORANT\bin\ifbld60.exe C:\Form.fmb, I have no problem, if I try to open a form in "C:\Documents and Settings" with C:\ORANT\bin\ifbld60.exe "C:\Documents and Settings\Form.fmb" or C:\ORANT\bin\ifbld60.exe C:\Documents and Settings\Form.fmb, I have some dialog with info and the error FRM-90927 and form builder doesn't start.
Thank you,
tom
Edited by: 912104 on 16-ago-2012 3.17 - title

Hi,
>
I cannot open a form from a batch on Windows if the absolute path contains spaces.
For example, if I try to open a form in "C:\" from cmd with C:\ORANT\bin\ifbld60.exe C:\Form.fmb, I have no problem, if I try to open a form in "C:\Documents and Settings" with C:\ORANT\bin\ifbld60.exe "C:\Documents and Settings\Form.fmb" or C:\ORANT\bin\ifbld60.exe C:\Documents and Settings\Form.fmb, I have some dialog with info and the error FRM-90927 and form builder doesn't start.
>
Why is that you want to open a FMB in Form Builder with a Batch file?
Is it that your application has only one FMB and that you work with only one FMB all the time?
Cheers,
PS: And if you must open the FMB through a batch file then look up the Form Builder Help for "Command Line options". It is an excellent resource.
Edited by: Prabodh on Aug 16, 2012 3:06 PM

How to run applications with options in IDEs like Netbeans

Hi, I'm new to the Netbeans IDE and I'm wondering how to run applications with options.
Normally I'd enter the following in the command line:
java -Djavax.net.ssl.keyStore=mykeystore -Djavax.net.ssl.keyStorePassword="..." TLSServer
java -Djavax.net.ssl.trustStore=mytruststore -Djavax.net.ssl.trustStorePassword="..." TLSClient localhostProblem is, I've no idea how to do the same thing in IDE's like Netbeans and I can't any settings to add options like "-Djavax.net.ssl.keyStore=mykeystore" before running the application. Any help will be appreciated.
Message was edited by:
Wolfgard

Right-click the project, click properties, clicl run, and add parameters to VM Options.

How to run etherape with ordinary user?

hi
when run etherape show this massege:
No capture device found or insufficient privileges.
Only file replay will be available.
EtherApe must be run with administrative privileges (e.g. root) to enable live capture.
Pcap error: no suitable device found
i create group etherape with this ownership
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> groupadd etherape
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> chgrp etherape /usr/bin/etherape
and add my user to this groups
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> usermod -G root,network,http,mysql,dbus,mem,bin,daemon,gdm,audio,video,rfkill,wheel,disk,sys,etherape mostafa
how to run etherape with ordinary user(without root privilege)?
Last edited by mostafasedaghat (2012-02-03 20:37:44)

mostafasedaghat wrote:how to run etherape with ordinary user(without root privilege)?
You can't. It requires root to set network card attributes, which can only be set with administrative priviledges. But it should be no problem to start it with sudo.

How to run FSG with ADI..

Hi
Can any one guide me how to run FSG with ADI..?
regards
Ahsan

Pl post details of OS, database and EBS versions. Pl see if MOS Doc 131505.1(The Beauty of FSG in ADI) can help.
More information will be present in the manuals for your Apps release at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

How to run a Concurrent Program from the back end?

Hi,
How to run a Concurrent Program from the back end?
Is it Possible to see that Concuurent Request id which we run from the back end, in the front end?
If yes, then Please Give reply how to write the code
Thanks in Advance,
Bharathi.S

This is documented in Chapter 20 of the Application Developers Guide http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121devg.pdf. These MOS Docs also have some information available
221542.1 - Sample Code for FND_SUBMIT and FND_REQUEST API's
235359.1 - How to Launch Planning Data Pull MSCPDP using FND_REQUEST.SUBMIT_REQUEST
HTH
Srini

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

Should I run Firefox with Rosetta all the time?

I was just wondering if it's a good idea to run Firefox with Rosetta all the time or will the browser run faster if I turn it off when it's not needed?
I need to turn it on enough to make me think it'll be easier for me if I leave it on all the time.

It will run faster and use less memory if you let it run natively- whether the loss in speed is made by the convenience of not having to switch it (for whatever reason you're switching) is a personal calculation.

Upgrade of scvmm 2012 sp1 to scvmm 2012 r2 fails with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied"

I had a working scvmm 2012 sp1 installation, and am attempting to upgrade to 2012 r2.
The old SCVMM product was removed (retaining the database), as well as ADK 8.0. I then installed ADK 8.1.
The install fails after a number of minutes with "Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied". From my reading of the log, that was the only obvious failure, and that the VMM server MSI installed successfully.
It doesn't appear to get so far as to upgrade the database.
The OS is Windows Server 2012 R2 Standard, with all updates applied. I have tried the install many times, noticed that the McAfee virus scanner was pushed to the box at some point, so I removed it, but still no dice.
12:18:58:LaunchMSI: MSI C:\Users\mscott\Desktop\mu_system_center_2012_r2_virtual_machine_manager_x86_and_x64_dvd_2913737\amd64\setup\msi\Server\vmmServer.msi succeeded.
12:18:58:Doing Postinstall task for PangaeaServer
12:18:58:ProcessInstalls: Install Item VMM management server was successful. We will launch the post process delegate.
12:19:47:Windows feature RSAT-Clustering-PowerShell already enabled, skipping
12:20:15:Windows feature WindowsStorageManagementService already enabled, skipping
12:20:41:Windows feature UpdateServices-API already enabled, skipping
12:23:31:VMMPostinstallProcessor threw an exception: Threw Exception.Type: System.UnauthorizedAccessException, Exception.Message: Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied.
12:23:31:StackTrace:   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize, Boolean checkHost)
   at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
   at System.IO.StreamWriter..ctor(String path, Boolean append)
   at System.IO.File.AppendText(String path)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(String trace)
   at Microsoft.VirtualManager.SetupFramework.CommonLogger.Log(LogLevel level, String trace)
   at Microsoft.VirtualManager.SetupFramework.Trc.Log(LogLevel level, String trace, Object parameter1, Object parameter2, Object parameter3)
   at Microsoft.VirtualManager.SetupFramework.Trc.LogException(LogLevel logLevel, String customMessage, Exception exception)
   at Microsoft.VirtualManager.Setup.DBConfigurator.ExecuteScript(SqlContext ctx, String fileName)
   at Microsoft.VirtualManager.Setup.DBConfigurator.UpgradeDatabaseTables()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.CreateDB()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
12:23:31:ProcessInstalls: Running the PostProcessDelegate returned false.
12:23:31:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
12:23:31:SetProgressScreen: FinishMinorStep.
12:23:31:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
12:23:31:****************************************************************
12:23:31:****Starting*RollBack*******************************************
12:23:31:****************************************************************
12:23:31:SetProgressScreen: StartMinorStep.
Mark E. Scott Jr.

Perhaps relevant, perhaps not. This error shows up right after the above log snippet. I assumed it was an error with the rollback routine, but just in case, here it is:
12:23:31:SetProgressScreen: StartMinorStep.
12:23:31:ProcessInstalls: Install Item VMM management server has a Preprocessing delegate of PangaeaServerPreinstallProcessor. Launching it now.
12:23:31:GetSqlLoginName: TThe login name for the vmm server service is [DGSLAB\tfs-vmm]
12:24:49:no HAVMM name detected in DB. Doing VMM Uninstall
12:24:53:Start setspn.exe parameters -D SCVMM/tfsvmm1.dgslab.com DGSLAB\tfs-vmm
12:24:56:Start setspn.exe parameters -D SCVMM/tfsvmm1 DGSLAB\tfs-vmm
12:25:00:DBConfigurationHander.SetupAsVMMServerRole() CarmineException : Threw Exception.Type: Microsoft.VirtualManager.Utils.FailedToAcquireLockException, Exception.Message: Unable to perform the job because one or more of the selected objects are locked by
another job.
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
12:25:00:StackTrace:   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLockWithRetries(CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.AcquireLock(CarmineObjectLockType lockType, Boolean doNotWaitForLock)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(RemoteServer server, Guid serverID, Version agentVersion, VersionState agentVersionState, AgentPackageType agentPackageType, Boolean wsManOverSSL, Int32 wsManPort, Nullable`1 complianceStatusID,
Nullable`1 mostRecentTaskID, Nullable`1 mostRecentTaskUIState, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer..ctor(SqlRow row, Guid serverID, Guid taskID, CarmineObjectLockType lockType)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.<>c__DisplayClass4.<GetInstance>b__3(SqlRow row)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.GetFromCommand[_RetTy,_ColumnsTy](ReadOption readOption, SqlRetryCommand cmd, GetFromCommandWorker`1 worker)
   at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleReadErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo notFoundErrorInfo)
   at Microsoft.VirtualManager.DB.Adhc.AgentServer.GetOne(String computerName, GetFromCommandWorker`1 ctor, ConnectionProperties properties)
   at Microsoft.VirtualManager.Setup.DBConfigurator.SetupAsVMMServerRole(Boolean isAssociate)
12:25:00:InnerException.Type: Microsoft.VirtualManager.DB.DBCorruptionException, InnerException.Message: Unable to connect to the VMM database because the database is in an inconsistent state.
Contact an experienced SQL administrator whenever this error occurs. In some cases, it may be necessary to restore the VMM database. If the problem persists, contact Microsoft Help and Support.
12:25:00:InnerException.StackTrace:   at Microsoft.VirtualManager.DB.SqlRetryCommand.ValidateReturnValue()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.Utils.CarmineObjectLock.ExecuteAcquireLockSP(CarmineObjectLockType lockType)
Mark E. Scott Jr.

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

How can i avoid Errors by folders with spaces in the script

Hello!
I have written (or better to say gathered) a script which should fix a problem in a network. Let me explain first what it should do.
Let's say we have a folder named Test with a lot of subfolders, one for each user of the network, which also contain many, many subfolders. The problem is that some user accidentally Drag and Drop subfolder into other subfolder. (E.g. D:\test\userA
is now in D:\test\UserB\UserA). And the next time User A wants to open his folder: It's gone. I really hope you can follow me because i am a little confused by myself right now. :)
And here is the thing, a VB Script with Icacls that change the User-Authorization in the first Level of Subfolders, so that they can't Drag and Drop anymore, though they have Full access to the content of the folder. So far my script works as far as
there a no spaces in the Foldername.
D:\test\UserA works.
D:\test\User A doesn't.
Here is my Script so far (i am german, so pls don't bother on the german names):
Dim objFSO, strLogFile, objLogFile
Const ForWriting = 2
Set objFSO = CreateObject("Scripting.FileSystemObject")
strLogFile = "D:\dir_log.txt" 'Log File to show what was changes
If objFSO.FileExists(strLogFile) Then
   set objLogFile = objFSO.OpenTextFile(strLogFile, ForWriting, true)
Else
   objFSO.CreateTextFile(strLogFile)
   set objLogFile = objFSO.OpenTextFile(strLogFile, ForWriting, true)
End If
read_two_subfolders "D:\test",objLogFile, 0 '
objLogFile.close
function read_two_subfolders(strFolderPath, objLogFile, intCounter)
On error Resume Next
Dim objUnterordner, objFolder
if intCounter < 1 then 'Number of Subfolderlevel which should be changed
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFolder = objFSO.GetFolder(strFolderPath)
For each objUnterordner In objFolder.SubFolders
objLogFile.WriteLine objunterordner.path
read_two_subfolders objunterordner.path ,objLogFile, intCounter + 1
Dim strFolder, strUser, strDomain
strFolder = objunterordner.path
strUser = "Testuser" 'User or Group
strDomain = "Testdomain" 'Domain (should be left empty at local domains)
SetPermissions
SetPermissions()
Dim intRunError, objShell, objFSOO
Set objShell = CreateObject("Wscript.Shell")
Set objFSOO = CreateObject("Scripting.FileSystemObject")
If objFSOO.FolderExists(strFolder) Then
  intRunError = objShell.Run("icacls " & strFolder & " /inheritance:r /grant:r " & strDomain &"\" & strUser & ":RX ", 2, True)
  If intRunError <> 0 Then
   Wscript.Echo "Error assigning permissions for user" & strUser & " to folder" & strFolder
  End If
Else
  Wscript.Echo "error: folder" & strFolder & " does not exist."
End If
Next
End if
End Function

Hi LW,
while I don't always see eye-to-eye with JRV, I really have to agree with him on this: Trying to make this work would probably be an act of futility. I highly recommend trying to learn powershell and do it there. Here are some links to commands that will
get you started on your problem:
Get-Help
Get-Member
Get-ChildItem
Get-Acl
New-AccessRule
Set-Acl
For producing something to order, you're best recourse is indeed a consultant however. I'd say this is more of a fish problem: Give a man to fish or teach him how to fish, so I highly recommend learning the skills for yourself. Your own skills will never
abandon you.
Cheers and good luck,
Fred
There's no place like 127.0.0.1

XletApplication Manager - How to run Xlet, with spaces in the path

Similar Messages

Maybe you are looking for