Running IIS, JRUN233, and xsql

I am new to both JRUN and xsql. I couldn't the configuration for JRUN in the XSQL Servlet doc. Can someone post the configuration on JRUN in order to run xsql?
Thanks.
null

Similar Messages

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

How To: Use Visual Studio, IIS Express, and Adobe Edge Inspect to view local projects

You CAN view a Visual Studio project with Adobe Inspect. The work around takes a little bit of time.
This involves using IIS Express to run your Visual Studio project, which is mainly a setting in Visual Studio, a Firewall change, a few command line and IIS Express config change. It isn't actually all that bad, but will make your life A LOT easier.
Here are the steps. (Note these are steps I used for Visual Studio 2012 and your project is part of a solution project. Windows 7 or Windows 8)
1. If IIS in not turned on, turn it on.How to: Enable Internet Information Services (IIS) - this should install IIS Express as well.
2. In Visual Studio, find the port that Visual Studio will be using for your project by Running your web project (Debug), and note/write down/save the port number that shows up in the browser when the project launches. (ex. http://localhost:12345)
3. Add a NetShare Reservation (process for this will be different for Windows XP)
Go to your Command Line (CMD) in Windows and in c:\Windows\system32> type in
netsh http add urlacl url=http://yourIPaddress:yourPortNumber user=everyone
(ex. netsh add urlacl url=http://12.34.56.78:12345 user=everyone)
Hit Enter key. You should be a successful add reservation message
3. Go to your Windows Explorer (File system) and go to c:/Users/YourName/MyDocuments (or Documents)/IISExpress/config/ and open 'applicationhost.config'
In the 'applicationhost.config' file find your site in the <sites> section.
Example:
<sites>
<site name="WebSite1" id="1" serverAutoStart="true">
                <application path="/">
                    <virtualDirectory path="/" physicalPath="C:\MyProjects\TestSite" />
                </application>
                <bindings>
                    <binding protocol="http" bindingInformation=":12345:localhost" />
                </bindings>
            </site>
</sites>
In this section ADD 2 new lines to the <bindings> section. Note add your own IP address and your own Computer Name
<binding protocol="http" bindingInformation="*:12345:12.34.56.78" />
<binding protocol="http" bindingInformation=":12345:MyComputerName" />
Save the config file.
4. Open up your Windows Firewall and go to 'Advanced Settings'. Here you want to create an Inbound Rule.
Right click on Inbound Rule and select New Rule
- Rule Type select 'Custom'
- Program leave this
- Protocol and Ports > Protocol Type select 'TCP' then Local Port select 'Specific Port' and fill in the port number you got from VS. Leave Remote Port alone.
- Scope
There are a few ways of doing this. Typically you would go the the Remote IP address and select 'These IP addresses: and select ADD > select 'Predefined set of computers' and choose Local Subnet. IF this does not work leave Remote IP addresses > Any IP address option selected instead.
- Action leave this
- Profile select Domain and Private
- Name put IISExpressWeb for the name
Select 'Finish'
5. Go to Visual Studio. (Note if you have multiple projects in your solution, choose your start up project. Right click on your project in Solution Explorer in VS and select 'Set as Start Up Project' )
Right click on your start up project again and you should see an option to 'Use IISExpress'
In the DEBUG dropdown (from the main menu bar at the top) select 'YourProjectName Properties'. Mine was the last one in the list with a wrench icon next to it.
This should open an new tab in your project, You should see a left hand list of option and a right hand column of options.
In the left column select 'Web' and in this tab select Use Local IIS Web server and select 'Use IIS Express' and type in your IP Address and port number (same as before) in the Project Url text box.
Save.
NOW, you should be able to run your project in Visual Studio and use Adobe Edge Inspect on your device and view new results in Chrome. You can develop from there.
If you still can not see it working, please be sure your device is on the same SubNet or Wireless network as your computer. If you are in a large network but the domains can still see each other, the Firewall Setting detailed above to allow Any IP Address in your Scope section.

Hi CMosqueda,
Thank you for taking time to share this information with other users.
Thanks,
Preran

10.6.8 running really slowly and failed to start up 4 times

Hello,
My MacBook Pro (which is about 4 years old) wouldn't start up 4 times, I just got the blue screen with the apple and nothing. Had to turn off. Eventually it started and now its running REALLY slowly.
Any thoughts would be most helpful to get it running more quickly!!
I ran Etrecheck and this is what came up:
Problem description:
Computer is running super slow, and has failed to turn on several times in the past week.
EtreCheck version: 2.1.8 (121)
Report generated 14 April 2015 13:44:11 CEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Check Battery - Cycle count 888
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
        spdisplays_display_connector
System Software: ℹ️
    Mac OS X 10.6.8 (10K549) - Time since boot: 4 days 17:2:2
Disk Information: ℹ️
    Hitachi HTS545025B9SA02 disk0 : (232.89 GB)
        - (disk0s1) <not mounted> : 210 MB
        Pretty Baby (disk0s2) / : 249.72 GB (19.55 GB free)
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Inc. Built-in iSight
    Seagate BUP Slim BL 931.51 GB
        - (disk1s1) <not mounted> : 210 MB
        Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 999.86 GB (804.57 GB free)
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 62
Kernel Extensions: ℹ️
        /Applications/VMware Fusion.app
    [loaded]    com.vmware.kext.vmci (2.0.7) [Click for support]
    [loaded]    com.vmware.kext.vmioplug (2.0.7) [Click for support]
    [loaded]    com.vmware.kext.vmnet (2.0.7) [Click for support]
    [loaded]    com.vmware.kext.vmx86 (2.0.7) [Click for support]
        /Applications/VyprVPN.app
    [not loaded]    foo.tap (1.0) [Click for support]
    [not loaded]    foo.tun (1.0) [Click for support]
        /System/Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (2.2.05) [Click for support]
    [loaded]    com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Click for support]
        /Users/[redacted]/Library/Application Support/Sparkle/Transmit/Transmit 4.1.9 Update/Transmit.app
    [not loaded]    com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.5) [Click for support]
Problem System Launch Daemons: ℹ️
    [not loaded]    org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
    [running]    at.obdev.LittleSnitchNetworkMonitor.plist [Click for support]
    [running]    at.obdev.LittleSnitchUIAgent.plist [Click for support]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.devicemonitor.plist [Click for support]
    [running]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [running]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [running]    com.rosettastone.rosettastonedaemon.plist [Click for support]
Launch Daemons: ℹ️
    [running]    at.obdev.littlesnitchd.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.adobe.versioncueCS3.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.vmware.launchd.vmware.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    Flux    Application (/Applications/Flux.app)
    Microsoft AU Daemon    Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
    AdobeResourceSynchronizer    UNKNOWN (missing value)
    LMILaunchAgentFixer    Application (/Library/Application Support/LogMeIn/LMILaunchAgentFixer.app)
    VMware Fusion Helper    Application (/Library/Application Support/VMware Fusion/VMware Fusion Helper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
    Canon IJ Network Scanner Selector EX    Application Hidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
    Microsoft AU Daemon    Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
    AdobeResourceSynchronizer    UNKNOWN (missing value)
    LMILaunchAgentFixer    Application (/Library/Application Support/LogMeIn/LMILaunchAgentFixer.app)
    Canon IJ Network Scanner Selector2    Application (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    VMware Fusion Helper    Application (/Library/Application Support/VMware Fusion/VMware Fusion Helper.app)
    TransmitMenu    Application (/Applications/Transmit.app/Contents/MacOS/TransmitMenu.app)
    TomTomHOMERunner    Application Hidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
    Dropbox    Application (/Applications/Dropbox.app)
    HP Scheduler    Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Silverlight: Version: 4.0.60129.0 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Click for support]
    CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Click for support]
    NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    QuickTime Plugin: Version: 7.6.6
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
    WebEx: Version: 1.0 [Click for support]
Audio Plug-ins: ℹ️
    iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS3 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Growl [Click for support]
    MacFUSE [Click for support]
Time Machine: ℹ️
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
        42%    ScreenSaverEngine
        12%    Dropbox
         3%    Finder
         3%    WindowServer
         3%    Folder Actions Dispatcher
Top Processes by Memory: ℹ️
    271 MB    Google Chrome
    121 MB    Google Chrome Helper
    64 MB    ScreenSaverEngine
    47 MB    WindowServer
    47 MB    mds
Virtual Memory Information: ℹ️
    45 MB    Free RAM
    2.30 GB    Active RAM
    1.16 GB    Inactive RAM
    520 MB    Wired RAM
    19.15 GB    Page-ins
    2.73 GB    Page-outs

Reset the SMC Resetting the System Management Controller (SMC) on your Mac - Apple Support
Your Hosts file is hacked, often associated with running pirated software Fixing a hacked /etc/hosts file
You're starting to run out of free hard disk space.
Take inventory of your LogIn items and Internet Plug Ins.....you're running a lot of junk at startup.
Speaking of start up.....restart your macbook every once in awhile, it's been over 4 days since your last boot.

"there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)

We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!

Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps.

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

LabVIEW Run Time Engine and ActiveX Automation Server

Hi,
I have a question related to LabVIEW Run Time Engine and ActiveX Automation Server:
We have a tool developed in LabVIEW and TestStand. End user interface is a LabVIEW GUI (it's an executable) which executes TestStand sequences. Some TestStand sequences call lower level LabVIEW VIs.
Everything works fine with LabVIEW installed, but I was wondering if I could run this tool on deployment machine with only LabVIEW run time engine installed. We are using LabVIEW 6.1 and with only the run time engine installed, I get the error message: "Unable to launch the 'LabVIEW.Application' ActiveX automation server ".
BTW, we are planning to upgrade the versions soon.
Is it possible to make things work only with the run time engine?
Thank you.

Thanks for the response, Brian.
I did upgrade to LabVIEW 8.0 and TestStand 3.5. Everything works fine on the development computer where LabVIEW and TestStand is installed. On the target computer in the lab, I installed LV RTE 8.0 and TestStand 3.5, and now when a VI is called in a sequence file, I get the following:
RunState.PreviousStep.Result.Error.Code -18002
RunState.PreviousStep.Result.Error.Msg "LabVIEW: The VI is not executable"
So, the executable opens and works fine (which means that the LV RTE is installed properly), but when a sequence calls a low level VI, it does not make it through.
comments/suggestions are appreciated. Thanks.

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

How to run the PioneerCyclingJSP and MotorPriseJSP modules at a time

Guys,
I would like to run the PioneerCyclingJSP and MotorPriseJSP modules at a time.
Could you please suggest me the steps to run both servers at same time on JBOSS 5.0 with ORACLE.
How to run a more that one server instance...
Thank you

You should be able to include both modules when building your ear file. Then both the module's war files will be created in the ear file. Access both the applications with their respective /PioneerCycling or /motorprise ( look for context root in application.xml)
If you want to run each application on different server, then
1. create 1 individual instances of jboss server for pioneer and another for motorprise
2. create additional dynamo server using command makeDynamoServer.bat motorprise 8861 8851
3. deploy each one on respective server folders in jboss
Use the appropriate ports to access ( say for ex:)
localhost:8860/pioneer
or
localhost:8861/motorprise
-karthik

Running IIS, JRUN233, and xsql

Similar Messages

Maybe you are looking for