Running os xp.cable connect ipod 2nd gen and box appears that asks that a camera is installed. i click no and i get no reconicition of a device in itunes. this is a recent happening. i have had no sync problems for almost 2 years. i cannot sync iphone too

have recently experienced sync issues with iphone 3gs,ipad2 and 2nd gen itouch.When i cable connect to xp pc i get a camera connected box. i opt out of this and itunes does not reconize my devices. Is ther something in my device manager missing?

Try this:
iOS: Disabling digital camera notification in Windows
Also check is AMDS is installed and active:
iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Similar Messages

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane and it w

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I have had my MacBook Pro for almost 4 years now. How do i permanently delete my deleted files?

I have had my MacBook Pro for almost 4 years now. How do i perminantly delete deleted files?

Your situation is not good, then. You will need to erase your hard drive and start anew. Boot from your installer DVD for the OS X version you have installed on it.
I hope you have backups because it's not likely you can backup at this point.
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
         optical drive and restart the computer. After the chime press and hold down the
         "C" key. Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

Connecting ipod 2nd gen to auxiliary input in car

Just got a new car - it has an auxiliary input. I noticed I can purchase two different connectors for my ipod - 1) cord with 3.5 mm connector on both ends 2) cord with 3.5 mm connector on one end, ipod dock connector on the other end.
Which one is better for listening to the ipod?
Thanks, Jessica

I'd probably say the one with the dock connector because it's most likely integrated into the car stereo, meaning it should keep you ipod charged as well as allow you to go through your songs on the head unit of the car. With the 3.5mm connector your car won't keep it charged and yu'll have to use the actual ipod to browse through songs.

I just bought the apple tv. I have had an iPad 2 for a year.

I've updated everything, rebooted everything, including the router. Several times and in a bunch different orders. I unplugged everything. Plugged in the router and waited for it to boot. turned on apple tv and then ipad. I even turned off and kept off possible competing devices. Though I doubt my android is running interference.
Both devices are connected to the same network. I've checked to make sure that the router was to the recomended settings.
Apple Tv
   model: MD199LL/A
   iOS: 6.0.2
iPad 2:
   Model: MC954LL/A
   iOS: 7.0.4
I'm at a complete loss. I am incredibly frustrated!!! The control panel doesn't show the icon, neither does double tapping the home button! What do I do?

ha. wow. I can't believe I forgot the key part of my frustrations. There is no airplay icon on my iPad. I've tried the language trick, I've turned of bluetooth. Essentially I have tried all the suggstions I could find through apple disscussions.

Ipod 2nd gen not connecting to bluetooth

Hi I have an ipod 2nd gen that i would like to pair with my Windows 7 laptop but for some reason it wont....Is it due to wrong specifications o nthe ipod?

iOS: Device not recognized in iTunes for Mac OS X
- New cable and different USB port. Different conductors/contacts are used for charging and data
- Try on another computer to help determine if computer or iPod problem

Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines?

I have a Ipod 2nd gen and i am frustrated that i cant update anymore is there anyway to get temple run some how?

Hey guys i want to donwload the original temple run for my ipod 2nd gen and it says i have to updat. But i cant update anymore so any way i can download it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.

HT201272 I am using Apple ipod 2nd gen with IOS 4.2.1 . No i recently updated my IOS and all my apps were deleted. Now when i download IBOOKS it needs IOS 5. How do i get the apps which are copatible with IOS 4.2.1 or IPOS 2nd GEN??

I am using Apple ipod 2nd gen with IOS 4.2.1 . No i recently updated my IOS and all my apps were deleted. Now when i download IBOOKS it needs IOS 5. How do i get the apps which are copatible with IOS 4.2.1 or IPOS 2nd GEN??

You should always have your apps on your computer. If you have failed to keep a copy of the old app versions, then you cannot get them back at all.
Sorry.
Many app makers no longer support the old ios and ipod models

IPod 2nd gen not showing in iTunes

My iPod 2nd gen hadn't been used for a while, and the battery was dead. I charged it, and connected it to my Mac Mini (1st gen). It is now continuously blinking orange but is not showing up as a device in iTunes (v. 10.6.3). According to the manual, the blinking means it's syncing in iTunes, or the iPod shuffle is enabled for disk use. I don't know what the latter means.
I'm using the original dock, but it is connected to a USB port on my external hard drive which is connected to the mini, since the 1st gen Mini doesn't have enough USB ports. (That shouldn't be a problem though, because my 3rd gen iPod nano shows up in iTunes using that same port.)
I've tried twice to get it to show up in iTunes. The first time it was already connected to the USB port but wasn't showing any lights, and it didn't show up in iTunes. I turned the shuffle off, waited 5 seconds, and turned it on again. Still didn't show up, so I manually removed it from the dock and unplugged the dock. Then I plugged the dock in again, and put the ipod firmly into the dock. Then the orange blinking lights started, but it didn't show up in iTunes that time either. I did get an error message that it had not been put away properly.
Since it wasn't showing up anywhere that I could find (iTunes, Finder, Desktop) to eject it, I shut down the computer, removed the iPod from the dock, restarted the computer, opened iTunes and then put the iPod in the dock. It still doesn't show up as a device in the left-side sidebar of iTunes where it usually does, right after Library, Store, and before Playlist). I can't put it away properly now because I can't find it to eject it. It's still blinking orange. (The right sidebar only has a message about Genius and learning to use it).
I've read previous questions similar to this, but nothing suggested there has worked. If anyone has suggestions/idea, it would be greatly appreciated.
My O.S. is 10.5.8.
Thanks,
Esther

Thanks for providing a good amount of detail.
Enable disk use is a setting (checkbox) on the shuffle's Settings tab in iTunes. It allows you to see the iPod's "disk" on the Desktop continously while it is connected, so that you can copy files to it using Finder (like it was a USB flash drive). The light blinks as a warning to eject before disconnecting, because the iPod's disk is mounted. If that checkbox is NOT checked, iTunes only mounts the iPod's disk when syncing, so the light does not blink most of the time (and you can disconnect it without ejecting).
Although you have confirmed that the USB port on the external drive (Is it an OWC miniStack?), which is the same as a powered USB hub, works with another iPod, you may want to disconnect something from a direct USB port temporarily. Connect the shuffles docking cable there, to confirm it's not the port causing the problem.
If you connect it and run Disk Utility instead of iTunes, does it appear in the Disk Utility sidebar?
Since this is a 2nd gen shuffle, and you use a Mac, you can try using the iPod Reset Utility
http://support.apple.com/kb/ht1238

HT1477 When i disconnect my iPod 2nd Gen from my laptop, its display turns off and working freezes. Please help me.

When i disconnect my iPod 2nd Gen from my laptop, its display goes off and working freezes. Please help me.

The computer freezes? There may be something wrong with the USB port. If the laptop has more than one port, does this happen on any port? If you are disconnecting the shuffle cable from the computer, does it make any difference if you disconnect the shuffle at the other end of the cable first, then disconnect the cable from computer? Or if you currently disconnect the shuffle from cable first, try it the other way.
You may be able to work around this problem, if you get a self-powered USB hub. Something like this one
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
There are many choices, but be sure to get one that has its own power supply. You can leave the shuffle cable connected to the hub, and connect the shuffle to the hub, instead of directly to the computer. This may provide a "buffer" for whatever is causing your laptop to shut off when the shuffle is disconnected. Since the hub has its own power supply, it will not rely on the computer for power to re-charge the battery.

I have an iPod 2nd gen. that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Running os xp.cable connect ipod 2nd gen and box appears that asks that a camera is installed. i click no and i get no reconicition of a device in itunes. this is a recent happening. i have had no sync problems for almost 2 years. i cannot sync iphone too

Similar Messages

Maybe you are looking for