Running reports 10g in web

hi
i am trying to run a report from the web
i get the error 'UNABLE TO CONNECT TO REPORT SERVER XXX'
in 6i on the console it works correctly
i want to know if there is a different way to run a report in web 10g, is it necessary to run a report server, or i can like in 6i just configure the registry?
thanks for any help

Hello,
Since 9.0.2, you have to start a reports server :
On Windows rwserver server=repserver
then use a URL like :
http://server:port/reports/rwservlet?server=repserver&report=test&destype=cache&desformat=html
Regards

Similar Messages

Not Able to run Report 10g through Web Layout Option

I have installed Oracle Developer 10g on my Laptop, I am able to run form, Report(In paper layout) successfully but when I try to run Report in Web Layout Mode, I am getting following error, Is there any setting is missing, could you provide some hint that would help me in resolving my issue.
Thanks
Kamlesh
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1001201432.java
javac: invalid flag: Files\Java\j2re1.4.2_01\lib\ext\QTJava.zip;;C:\Dev10g\j2ee\home\lib/ejb.jar;C:\Dev10g\j2ee\home\lib/servlet.jar;C:\Dev10g\j2ee\home\lib/ojsp.jar;C:\Dev10g\j2ee\home\lib/jndi.jar;C:\Dev10g\j2ee\home\lib/jdbc.jar;C:\Dev10g\j2ee\home\iiop.jar;C:\Dev10g\j2ee\home\iiop_gen_bin.jar;C:\Dev10g\j2ee\home\lib/jms.jar;C:\Dev10g\j2ee\home\lib/jta.jar;C:\Dev10g\j2ee\home\lib/jmxri.jar;C:\Dev10g\j2ee\home\lib/javax77.jar;C:\Dev10g\j2ee\home\lib/javax88.jar;C:\Dev10g\j2ee\home\../../opmn/lib/ons.jar;C:\Dev10g\j2ee\home\../../opmn/lib/optic.jar;C:\Dev10g\j2ee\home\../../lib/dms.jar;C:\Dev10g\j2ee\home\../../dms/lib/dms.jar;C:\Dev10g\j2ee\home\../../diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\../../dms/diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\lib/connector.jar;C:\Dev10g\j2ee\home\lib/bcel.jar;C:\Dev10g\j2ee\home\lib/cos.jar;C:\Dev10g\j2ee\home\lib/jsse.jar;C:\Dev10g\j2ee\home\../../oracle/lib/jsse.jar;C:\Dev10g\j2ee\home\lib/jnet.jar;C:\Dev10g\j2ee\home\lib/jcert.jar;C:\Dev10g\j2ee\home\lib/activation.jar;C:\Dev10g\j2ee\home\lib/mail.jar;C:\Dev10g\j2ee\home\../../javavm/lib/jasper.zip;C:\Dev10g\j2ee\home\../../lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../oracle/lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../jlib/orai18n.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/orai18n.jar;C:\Dev10g\j2ee\home\lib/jaxp.jar;C:\Dev10g\j2ee\home\lib/jaas.jar;C:\Dev10g\j2ee\home\jazn.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\jaxb-rt-1.0-ea.jar;C:\Dev10g\j2ee\home\../../soap/lib/soap.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsserver.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsdl.jar;C:\Dev10g\j2ee\home\../../rdbms/jlib/aqapi.jar;C:\Dev10g\j2ee\home\lib/jem.jar;C:\Dev10g\j2ee\home\../../javacache/lib/cache.jar;C:\Dev10g\j2ee\home\lib/http_client.jar;C:\Dev10g\j2ee\home\../../jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../jlib/repository.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/repository.jar;C:\Dev10g\j2ee\home\lib/jaasmodules.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/runtime12ee.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/translator.jar;C:\Dev10g\j2ee\home\lib/crimson.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcms.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcms.jar;;;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\classes;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;.
Usage: javac
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath Specify where to find user class files
-sourcepath Specify where to find input source files
-bootclasspath Override location of bootstrap class files
-extdirs Override location of installed extensions
-d Specify where to place generated class files
-encoding Specify character encoding used by source files
-source Provide source compatibility with specified release
-target Generate class files for specific VM version
-help Print a synopsis of standard options

Hello,
The problem seems to be a space in the Classpath :
javac: invalid flag: Files\Java\j2re1.4.2_01
Files\Java\j2re1.4.2_01 seems to be the end of c:\Program Files\Java\j2re1.4.2_01 ..
Check REPORTS_CLASSPATH
regards

Reports Server/running reports on the web.

I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
Thanks

Please note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/

Error while running report 10g

DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
     repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
     WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid

Report 10g on web.

Dear,
i am using Report 10g. when i buid a report with wizard it runs on the web. but when i build it mannually it don't run on the web.
what's the problem?
thanks
Muhammad Nadeem

Hello,
Do you create a "Web layout" when you create your reports manually ?
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/reports/webrpt/a_web_rpts.htm
Regards

Running Reports 10g on Apps Server

We have a Windows 2003 apps server running Oracle Forms and Reports 10g.
We are having a problem running reports in Oracle 10g, and believe it to be something to do with the configuration files. Currently, we can run the test report through Enterprise Manager using both the default reports service and the one that we have created. However we are unable to run our own reports through forms.
To check that there was nothing wrong with our forms, we copied one of the reports into the â¦\forms10g\reports\samples\demo folder to see if we could run it through Enterprise Manager. However, we get the following error:
Rep-110: Unable to open file â¦â¦
Rep-1070: Error while opening or saving a document.
Rep-0110: Unable to open file â¦...
We then renamed the test.rdf file and tried to run that. Again we got the above message. Next we tried again to run test.rdf, even though this no longer existed, and the report ran. This implied that it isn't actually running the report, but has the report output stored somewhere, and it just displays this.
No matter how we try to run reports, and with which reports service, we always get the above error.
So why is it that no reports will run, not even the test one when it is renamed? Is there a configuration setting somewhere?

Hi All,
Hope YOu are fine.
We have running Oracle Forms and Reports Services 10g on Windows 2000 Advanced Server.
The Application Works fine, and reports are generated successfully.
But when we access the same application by using either Linux OS (RHEL 4.0, Ubuntu 6),
The forms works fine but Linux OS could not run the report.
This seems to be a configuration problem.
Any Clues.
Thanks and Looking Forward.
Aamer Javaid
[email protected]

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Error when run report 10g (10.1.2.0.2) with Paper parameter form

Dear Friends
I just installed Developer suite 10g and Database 10g on my pc (10.1.2.0.2) when I run report in Report builder with paper parameter form (I selected only one system parameter : Destination type) I got the message
Reports Error Page
Fri Apr 07 09:06:01 GMT+07:00 2006
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
How to solve it? Please give me the instruction or Oracle link that I can get the documents. If someone has the white paper .pdf please give me.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

Cannot run Report on the web

Hello
i am trying to run a report on the web but it does not ,
i have a form from where i am calling a report using
run_product built-in, it does not respond nor give any error
message, what can be th problem
the report server has been set.
please can any one you who have tried these help me out
Vishnu Vadla
null

What are you using to run your forms and reports, forms web
cartridge, reports web cartridge/ reports web cgi, oracle
application server ....?
Vishnu Vadla (guest) wrote:
: Hello
: i am trying to run a report on the web but it does not ,
: i have a form from where i am calling a report using
: run_product built-in, it does not respond nor give any error
: message, what can be th problem
: the report server has been set.
: please can any one you who have tried these help me out
: Vishnu Vadla
null

Running reports through the web with SSO enabled

Hey,
I am trying to run several reports through the web by calling a direct url, but for some reason every time I am prompted to sign into Portal because SSO is enabled. What can I do to avoid the sign in page and run the report directly?
Thanks

Hello,
Add authid=username/password in the URL where username/password is a valid account in the oid
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/cla_authid.htm
Regards

Running Reports through a web browser

Hi All,
Please help me how we can run Oracle Reports 6i on web browser??
waiting for quick reply

Hello,
Take a look to the document :
Oracle Reports Publishing Reports
Release 6i
A73173-01
Publishing Architecture and Concepts
2.2.1 Web architecture: server configurations
2.2.1.1 Processing Web reports
http://download-uk.oracle.com/docs/html/A73173_01/output/pbr_arch.htm
Regards

Report 10g in Web Layout

I've configured forms and reports server 10g. Forms are working fine. However report is not running in web layout. I'm getting the following error message in web browser.
Reports Error Page
Thu Jul 19 14:33:14 IST 2007
javax.servlet.jsp.JspException: REP-50002: Server is shutting down
Reports are running in Paper layout.
Can anybody help me about this?

Ok,
first of all are you running your reports on the iAS or OC4J of iDS?
second are you running on windows or linux or unix ...
if running on iAS are you trying to run your report with the in-report server?
If so create your own standalone report server and integrate it in your iAS console with the addNewTarget command
Message indicates that your reports server is not running smoothly , can you access your ias admin console?

How to deploy the Oracle Forms and Reports 10g in Web?

Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
Any one know how to deploy the Oracle forms and Reports in web?
Please help me out. Thanks in advance.
Vimal

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Any documentation on running report 10g in linux server

Dear Gurus,
We are converting 6i reports to 10g reports. I need some documentation on how to run 10g reports in Linux Server! In windows environment working fine but need to test in Linux side! Pleas help thanks!

Hi!
I have some questions about CopyApp utility. I am trying to Copy TestApp to Prod application. Those applications are on different Planning servers. Sql databases are on the same sql server. Olap applications cubes are on different essbase servers.
Is this syntax correct: (I think I can run this on Planning production server, or should I use Planning test server or does it matter when I use properties file???)
CopyApp /S:TestApp /T:ProdApp /P:\\D:\Hyperion\Planning\bin\Copyapp.properties
In the Copyapp properties file (using Sql):
Is this correct syntax (referring to syntax above, left out usernames and passwords etc)
App_JDBC_CATALOG=TestApp
App_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
App_JDBC_URL=jdbc:hyperion:sqlserver://XXX
App_JDBC_USERNAME=
App_JDBC_PASSWORD=
App_JDBC_DATABASE_TYPE=SQL
App_OLAP_SERVER= essbase server1
App_OLAP_USERNAME=
App_OLAP_PASSWORD=
App_OLAP_APPNAME=TestApp
App1_JDBC_CATALOG=Prodapp
App1_JDBC_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
App1_JDBC_URL=jdbc:hyperion:sqlserver://XXX
App1_JDBC_USERNAME=
App1_JDBC_PASSWORD=
App1_JDBC_DATABASE_TYPE=SQL
App1_OLAP_SERVER= essbase server2
App1_OLAP_USERNAME=
App1_OLAP_PASSWORD=
App1_OLAP_APPNAME=ProdApp
Should I change something to make this work?
kind regards, user 637777
Edited by: user637777 on 3.10.2008 4:27

No output no error when running reports 6i on WEB

Hello reports Gurus,
Sorry for posting the same problem.It's very important for me to have a solution.
Here is my problem:
I'am using reports 6i with Apache web server on SUN SOLARIS 9.When Trying to access to the report server(http://host:7778/dev60cgi/rwcgi60/showenv?server=rserver) a blank page appear without error.
What's the problem.PLZ help it's important.
Thank for ur help!

Hello Saumen!
Thank for ur answer.I'm not trying to run a report on web.First i just tried to check the report server : http://hostname:port/dev60cgi/rwcgi60/showenv?server=rserver.
But i receive no display and no error.Here's my problem.
What can i do for report works fine on web.
Remain that i'm using reports 6i, with Apache web server on SUN SOLARIS
Any idea!

Running reports 10g in web

Similar Messages

Maybe you are looking for